Snow blower Husqvarna ST5524. Review, characteristics, reviews

The Husqvarna 5524st snow blower is a powerful, functional unit for effective snow removal for both daily and periodic use, capable of quickly clearing large areas of drifts of fresh and compacted snow, ice crust and wet snow mass.

Snow blower Husqvarna ST5524

Husqvarna snow blowers have established themselves in the garden equipment market as one of the best tools for snow removal. Husqvarna ST5524 is a professional-class model that can be used to clean areas of varying sizes both at home and on an industrial scale.

Snow blower Husqvarna ST5524

The device is powered by a Briggs&Stratton 800 SnowSeries four-stroke gasoline engine. The power unit has been specially designed for Husqvarna snowblowers.

Peculiarities

• Engine, professional, manufactured for work at low temperatures, hand-started in all weather conditions;
• Two-stage snow removal system, a durable auger crushes and transfers snow to the impeller, and from there it flies out through the bell;
• The control panel is convenient and practical, there are basic control systems for the snow blower;
• Adjustment of emission using a lever located on the control panel;
• The wheels, with a diameter of forty centimeters, have a special deep tread pattern;
• LED headlights for efficient work at dusk.

Description

The power of the Husqvarna ST5524 snow blower is 5 hp. With. This is a small model. Unlike more modern models, this snow blower only has a manual engine start. The absence of an electric starter significantly impairs the starting of equipment at sub-zero temperatures.

Husqvarna ST5524 snow blower in action

Husqvarna ST5524 is a small model, the maximum working width of the augers is 61 cm, and the height is 59. At the same time, the manufacturer recommends using the snowblower when the snowdrifts are no more than 30 cm high. If the snow height exceeds 30 cm, the operator must reduce the speed movement and go through the area twice.

The maximum travel speed can be 4 km/h. For maximum comfort, the model is equipped with a system for changing the speed of movement: 6 forward and 2 reverse.

Features of Husqvarna ST5524:

• two-stage snow processing system (snow is crushed by an auger and then thrown out through a bell);
• stable engine (B&S SnowSeriesMax are designed for intensive winter use);
• the ability to lock the differential, which allows you to change the direction of movement;
• availability of headlights for work at night;
• fuel tank with a volume of 3 liters;
• possibility of adjusting the height of the auger. This feature is necessary when removing snow from surfaces that are easily damaged, such as tiles or stones. The second type includes crushed stone and pebbles. If the auger height is not adjusted correctly, stones can get inside the device and damage its parts.

• overload protection system.

Petrol snow blower Husqvarna 5524ST

Description

Peculiarities:

• High-performance two-stage snow thrower with powerful augers and variable speed control;
• The Briggs & Stratton OHV engine provides reliability, power and cold weather starting.
• The Husqvarna 5524ST snow blower propeller effectively collects snow into the machine, after which it is thrown out by a high-speed air flow. Ball bearings provide increased reliability of the screw.

Features of the Husqvarna 5524ST snow blower:

The snow blower must be operated, maintained and repaired by persons who are familiar with its specific characteristics and who are familiar with the relevant safety regulations.

When operating the Husqvarna 5524ST snow blower, you must wear appropriate winter clothing and shoes that allow you to walk safely on slippery surfaces. Use only attachments and accessories approved by the snow blower manufacturer.

To connect snow blowers with an electric motor, as well as with an electric starter, use a triple ground wire.

Before you begin clearing snow, allow the engine and unit to adjust to the ambient temperature. Do not clear snow across a slope. Take special care when changing the tilt direction. Do not attempt to clear snow from steep slopes. Never operate at high speed on slippery surfaces. Be careful when driving in the opposite direction.

Never use the Husqvarna 5524ST snow blower if its guards are not in place.

In some weather conditions, the discharge chute may become clogged with ice and snow. Use a clearing tool to remove blockages

Movement forward and backward is controlled by the traction drive control lever located on the left handle. The speed and direction of travel are controlled by the speed control lever. Do not change the position of the speed control lever while the wheel drive is engaged. This may cause the snow blower to malfunction.

Slow speeds are for heavier snow and faster speeds are for light snow and transporting the snow blower. It is recommended to start at low speed until you get used to the operation of the device.

To adjust the guide rails, you can use the wrench included in the kit. Guide slides are located on both sides of the auger housing and determine the clearance between the scraper and the surface. Install the sled at the same height, based on the characteristics of the surface being cleared of snow. For clearing snow in normal conditions, such as paved roads or sidewalks, set the skid to the maximum height, which will give a clearance of 3 mm (1/8″). Use the middle position if the surface is uneven.

It is not recommended to use the Husqvarna 5524ST snow blower on gravel or rocky surfaces. Rocks from such surfaces can easily be thrown by a snow blower, which can cause serious injury or damage to property or the unit itself. If you do have to remove snow from gravel surfaces, be extremely careful and set the skid to the lowest position. Adjust the slide by loosening only the 13 mm (1/2″) rear nut and then moving the slide to the desired position. Make sure the left and right slides are set to the same height.

The scraper is not adjustable, but can be turned the other way. After a certain period of service, it may wear out. When it is worn down almost to the edge of the casing, it can be turned over and serve for a long time until it needs to be replaced. If the scraper is damaged or worn, replace it

During operation, the throttle valve should be as open as possible. A fully open damper ensures the best operation of the device. Move more slowly when clearing deep, freezing or wet snow. Use the speed control lever to do this, NOT the throttle. The easiest and most effective way to remove snow is immediately after it has fallen. The best time to clear snow is early morning. At this time, the snow is usually dry and not exposed to direct sunlight and higher temperatures.

When removing snow, lightly grab the already cleared strip, which will allow you to remove the snow more efficiently. If possible, throw snow into the wind. Correctly adjust the height of the guide rails according to the working conditions. To remove very heavy snow, reduce the working width by partially sweeping the strip already cleared and reduce the speed.

Remove snow from the engine during use. This will ensure normal air intake and long life for the engine. When finished, run the engine for a few minutes to melt the snow and ice around the engine.

After each use, clean the snow blower and dry it so it is ready for the next use.

Change the oil every 25 hours of use, or once a year if the snow blower is used less than 25 hours a year. Replace the spark plug at the beginning of each season or after every 100 hours of operation.

It is not recommended to use garden hoses to clean the snow blower unless the electrical components, muffler and carburetor are kept away from water. If water gets into the engine, it can shorten its service life.

When storing your Husqvarna 5524ST snow blower, clean it thoroughly to remove any dirt, grease, leaves, etc.

• Store the snow blower in a clean, dry area.
• Clean the entire snow blower
• Check and replace, if necessary, belts.
• Make sure all nuts, bolts, screws, and studs are securely secured. Inspect rotating parts for damage and wear. Replace if necessary.
• Touch up all parts that have suffered from corrosion or chips; Rub them lightly with sand before painting.
• Drain the gasoline from the tank.
• Start the next season with fresh fuel.
• Drain the oil (with the engine warm) and refill with fresh engine oil.
• Replace the spark plug.
• Pour about one ounce (29 ml) of oil through the hole into the cylinder.

Characteristics

Features of the device and operation

• The machine is equipped with a gasoline power plant that powers all working parts, including the wheeled chassis. The performance of the internal combustion engine is 6 horsepower at peak load. The unit is equipped with a manual starter, which is activated by pulling a special cable. The recoil starter has a simple design, and with regular maintenance it almost never breaks down.
• At the front of the machine there is a casing made of metal alloy. The casing component is the working element. Due to the sufficient width of the casing, the snow blower is able to process snow over a large width in one pass.
• Metal is also used to make the outlet chute, which effectively protects against damage. The outlet chute is a functional component that allows you to change the direction and distance of snow thrown out.
• The machine is equipped with a highly efficient auger that captures snow. This main working body is also designed to crush the snow so that it can easily pass out through the outlet chute, and then be thrown in the desired direction specified by the user - forward or to the side. The maximum forward throw distance of the ST5524 model is 15 meters.
• The main auxiliary organ of a snow blower is a rotor wheel with blades. This operating component rotates in such a way that snow is thrown out at an excessively fast speed.
• The wheels are made from a metal disc and a rubber tire with deep tread. The deep tread pattern prevents slipping and also improves traction on slippery and icy roads.
• The ergonomic handle is one of the main advantages of the Husqvarna ST5524 snow blower. The handle can be adjusted in height and adjusted based on your own height to make it more convenient to move the machine, perform maneuvers, turns, turns, etc.
• The snow blower has simple controls located in the right place. Well-tuned ergonomics allow you to quickly master machine control skills. This fact had a beneficial effect on the machine’s performance as a training snow blower.
• Model ST5524 is easy to operate and maintain. Some repairs must be performed regularly to prevent more serious problems in the future. Experienced users advise performing basic maintenance steps before the onset of winter, as well as after the end of the winter season.

So, in the first case, it is necessary first of all to replace the friction rings and belts. Practice has shown that these components often fail after 1.5-2 seasons of intensive use.

In addition, before the onset of winter, it is recommended to change the engine oil, as well as the oil in the gearbox. Please note that the frequency of oil changes is once a month or once every subsequent 25 hours of operation - especially if the machine is subjected to heavy loads and removes a large amount of wet and accumulated snow.

Changing the oil in the gearbox is a more labor-intensive task compared to changing the oil in the engine. And yet, this procedure can be divided into several simple steps:

• Engine starting
• Turning on the auger drive
• Wait until the engine warms up
• After 20 minutes, turn off the engine and wait until the augers stop
• After the above steps, you can drain the old oil and fill in new lubricant recommended by the manufacturer. Before the start of winter, it also wouldn’t hurt to perform the following procedures:
• Replace the air filter. At best, you can simply wash it and put it back in place.
• Check the fuel filter, replace it or if necessary
• Installing new glow plugs. Now let's look at the list of actions that are necessary to prepare a snow blower for long-term storage, until next winter. This procedure is usually performed after the end of the winter season. So, to preserve your snow blower, you need to do the following:
• Lubricate all screw connections - bolts, nuts and other fasteners. For ease of lubrication, use a cloth soaked in engine oil.
• All cables also need lubrication to prevent freezing and dry friction between parts. For lubrication, we use WD-40 fluid and generously fill all the cables with it.
• We start the engine and leave it running until the fuel mixture runs out.
• To completely dry the fuel tank, open its lid and place a dry towel on it. Leave in this position overnight. In the morning the tank will be dry, and there will not be a single drop of gasoline in it. This is done to make long-term storage of the unit safer.
• Now we unscrew the spark plug and install the snow blower in its storage location until the next winter season.

Next, we highlight the main faults that are most typical for the Husqvarna ST5524 snow blower:

If the engine does not work, or is unstable (for example, the speed fluctuates):

• Drain the fuel and fill with normal fuel recommended by the factory.
• Perform maintenance on the air filter, wash or replace it
• Change the glow plug
• Make sure the choke is open before the engine starts
• Check the engine operation without the spark plug inserted
• Measure the compression level. The optimal compression value is about 9-12 atmospheres
• It is possible that the reason for the engine not working is a burnt out valve or scattered rings. Also, perhaps the problem lies in a burnt gasket.

Another problem is a malfunction of the gearbox, due to which the car is unable to move. Most likely, the problem is due to a damaged or worn friction disc. This causes the drive roller friction ring to not make contact with the disc. To fix the problem, it is recommended to replace the friction ring, but this will only solve the problem for a while. For a major overhaul, you will have to replace the disk itself.

User manual

Before putting into operation all Husqvarna snow blowers, the manufacturer recommends that you read the operating instructions. This document is included with each model. If snow removal equipment is purchased on the secondary market, the operating instructions can be found on the Internet or on the company’s official website. As of today, the Husqvarna ST5524 model is not supplied to Russia and the CIS countries.

Snow blower device

Instructions for using the device include the following points:

• Workshop on safe operation of the device. This paragraph includes rules for preparation, safety, operation, as well as care and storage.
• Assembly.
• Operating procedure.
• Service maintenance and equipment setup.
• Storage rules.
• Troubleshooting yourself.

As for the rules of use and safety precautions, these points are the same for all snow blowers in the model range. Assembly features vary depending on model and availability of certain parts. As a rule, all snow blowers are delivered to stores assembled. Before operation, the user must assemble the design parts in accordance with the diagrams. In addition, the operator needs to adjust some design elements of the snow blower depending on the size of the person and the characteristics of the surfaces being processed.

The Husqvarna ST5524 snow blower auger and traction drive belts are not adjustable. If any malfunctions are detected in these parts, it is recommended to replace them immediately. Before carrying out repair work, it is necessary to turn off the engine and completely drain the fuel.

To use the snow blower productively, you must:

• before starting work, it is recommended to check the pressure in the wheels of the snow-removing walk-behind tractor;
• The spark plug should be inspected and replaced regularly. The spark plug is replaced every season, every 100 hours of operation or when the part fails;
• The snow blower must be stored in a dry, ventilated area;
• Maintenance must be carried out before and after use, at the end of the season and before commissioning;
• The snow blower oil should be changed every 50 hours of operation;
• Before use, pay attention to the condition of the bolts, especially the snow blade mounting system (augers and casing).

Description and purpose

The snowplow in question is perfectly adapted to harsh climatic conditions, and is characterized by high geometric cross-country ability, which allows the model to be used on slippery icy surfaces. The equipment is designed for use in a wide range of tasks. For example, in the household, the ST5524 unit is useful for clearing snow along fences, house walls, narrow streets, driveways, as well as alleys, nooks and other hard-to-reach places. In this regard, the machine looks more advantageous than bulky and heavy snow removal units. Moreover, the equipment is designed for a much more serious range of tasks - cleaning football and industrial grounds, clearing the areas of cafes, hotels and restaurants, as well as removing snow from parks and parking areas. As you can see, the car has extensive capabilities, despite the compact engine.

Owner reviews

Nikolay, Kharkov:

“I purchased a Husqvarna ST 5524 snow blower more than a year ago. Among the advantages, I can highlight its low weight compared to other devices. I use the car in a suburban area, where I often have to change direction. The high maneuverability of the snow blower comes to the rescue. Among the shortcomings is the lack of an electric starter.”

Igor, Voronezh:

“I purchased a model 2 years ago to clean the area near the store. Since the area is small, using a snow blower is not very cost-effective. Does the job perfectly. Now I use it on a country plot for myself and my neighbors. Cleans small alleys without problems. Among the disadvantages of Husqvarna are the mounting bolts. When hit by a stone or frozen pile of snow, they fail.”

Principle of operation

The Husqvarna 5524st snow blower is very simple in operation. Starting the engine allows you to activate the chassis and cleaning device of the machine, which works according to the following scheme:

1. The forward movement allows the bucket to capture the volume of snow mass.
2. A toothed auger crushes ice crusts and compacted areas, simultaneously moving them into the cavity of the apparatus.
3. The rotating impeller forcefully pushes the snow and ice chips through the guide pipe at a distance from the area being cleaned.

Reviews

• Vasily, Tomsk. A good machine for daily snow removal. Its power is enough to remove high snowdrifts, including dry or wet snow, stale or frozen snowdrifts. At the same time, I will note the excellent grip of the wheels on the surface. This made me very happy, because thanks to this I did not have to change the standard tires, as I usually did with my former Chinese one. The equipment is very demanding on the quality of gasoline, like other prestigious foreign cars. But I still fill it with AI-92 to save on consumables. It is necessary to fill only with high-quality oil recommended by the factory. All bolts and screws must be tightened regularly so that they do not get lost in deep snow. The build quality is excellent, but why be surprised, since this is a Swedish model. And what kind of person do you have to be to regret buying Husqvarna?
• Alexander, Yekaterinburg. A decent device for any task. The powerful 6-horsepower engine operates stably and does not cause any problems. But the disadvantage of this device is something else - the underdeveloped Husqvarna service in our country. All large spare parts are in short supply, and only small parts from another model will fit - connections, bolts, screws, etc. And everything else must be ordered if it breaks. Fortunately, everything is fine with me so far, and nothing has fallen off. The machine does not overheat under load and is able to quickly remove a snowdrift. You just need to regularly clean the outlet chute, which is constantly clogged with snow.

Reviews and Reviews

Watch the videos (above) and reviews (below), they are often better than text reviews. You can read more reviews or leave your own in the comments to this page. Thank you for your review or rating!

Vadim

Good model of snow blower. I chose a snow blower to clean the snow in the yard near the house and go to the street. It removes snow well and hasn't caused any problems in 2 seasons. The main thing is to correctly understand its capabilities.

Rate this model:

Model rating: 4.6 / 5. Number of ratings: 11