When spring comes, people often spend their free time at their summer cottage. With the onset of warm days, they try to rid their area of such problems as weeds and grass. It is difficult to do this manually, especially if the area is very large, so a lawn mower will help. Thanks to this technique, you can trim the grass and remove weeds - this is a suitable device for mowing unnecessary plants near the fence, at home, between the rows in the garden in a flower bed, and so on. Read about how to choose a lawn mower that is suitable for your needs here. The cutting element in this device is a fishing line (strong polyethylene thread), which is wound on a special element - a reel. But over time, the fishing line wears out and there is a need to replace it. The article will discuss how to thread fishing line into a lawn mower.
Which fishing line to choose to refuel a lawn mower
The thickness of the polyethylene thread depends on the model of equipment and varies from 1.2 to 4 mm. She may be:
- with a round cross-section - this is the most durable material for mowing herbaceous plants;
- with a figured section - used for mowing soft plants;
- twisted - used for thin grass;
- professional type, not suitable for all equipment models.
To change the line on a lawn mower, you need to purchase a cutting thread that will be ideal for a particular type of mower.
Criterias of choice
You can soak the thread in a bowl of water for a few minutes to increase elasticity and strength.
Petrol mower Husqvarna 224L – model characteristics
The main advantages of this lawn mower include compactness, ease of operation and low maintenance. The high power reserve of the standard internal combustion engine gives the model the ability to easily and quickly cope with mowing young dense growth, cutting off bushes and weeds.
Key features of the Husqvarna brush cutter include:
- built-in motor power – 1.1 l. With.;
- capacity of the standard fuel tank – 900 ml;
- the maximum permissible cutting width with fishing line is 40 cm;
- knife cutting diameter – 25.5 cm;
- generated sound pressure – 95 dB;
- working weight – 5.2 kg.
The trimmer successfully combines impact resistance and durability. This makes it possible to use the model to work in the most difficult operating conditions.
Line arrangement in the mower
The structure of the element on which the nylon thread is wound is very simple. This element is called a coil. It has two “tracks” - upper and lower. Between these tracks there is a special partition with a recess. A fishing line is wound around these tracks. It must first be pulled through the notch.
To be able to pull out the reel without any obstacles, you need to unscrew the special button located on the mower body.
Features of replacing fishing line on video.
The above-mentioned unit can be made with your own efforts, and this article will tell you how to build a lawn mower from a trimmer with your own hands.
Husqvarna trimmer 135R – parameters and applications
This Husqvarna offers high power, low noise and vibration levels, and is easy to use and maintain. The trimmer is designed for caring for small and medium-sized gardens and local areas. The long-lasting rotary mechanism of the lawn mower successfully copes with mowing tall dry grass, cutting thick weeds and large shrubs.
The main characteristics of the braid include:
- built-in motor power – 1.9 liters. With.;
- capacity of the standard fuel tank – 600 ml;
- the maximum permissible cutting width with fishing line is 40 cm;
- knife cutting diameter – 25.5 cm;
- generated sound pressure – 98 dB;
- working weight – 6.9 kg.
The drive shaft of the model is protected by a reliable, non-separable metal rod, coated with an alloy that protects it from corrosion.
Sources:
https://www.vse-dachi.com/kak-namotat-lesku-na-trimmer-pravilno.html https://hitech-online.ru/tehnika-dlya-sada/trimmer/kak-menyat-lesku.html https://san-lider.ru/leska/pochemu-vyletaet-leska-iz-katushki-trimmera-shtil.html https://www.tool-store.ru/trimmer/Husqvarna-128-r/ https:/ /tehnika4sad.ru/trimmery-motokosy/Husqvarna.html
Replacement instructions - how to insert fishing line
It should be noted that the reels in mowers can be different:
- for functioning with one antenna;
- for functioning with two antennae;
- the fishing line must be threaded through the through hole, which is located inside the element.
And you should not confuse this part with an extension cord for a lawn mower on a reel, because despite the similar name, these are two completely different elements.
The mini chainsaw is designed for simple work and people who prefer to hold the device with one hand.
This article will tell you how much the ZIL 130 dump truck weighs and what this vehicle is capable of.
Read here //machinspec.com/lesozagotovitelnaya/benzopila/stanok-dlya-zatochki.html how to assemble a machine for sharpening chainsaw chains with your own hands quickly and easily.
In the first option, winding the cutting element is very simple:
- There is a locking eyelet on the inside of the spool element.
- One tendril of thread is inserted into it.
- It is necessary to thread the nylon thread in the direction opposite to the rotation of the spool element.
- You will only need 2 to 4 meters of fishing line . When the winding process is completed, move the small end of this cutting element outward and fix it in the groove, which is necessary for fixing the fishing line so that it does not unwind while the mower is operating.
- If there is no special groove, then the end should be held with your hand so that the cutting element does not unwind during further assembly of the element.
- At the last stage, it is necessary to thread the outer end of the thread into a special hole located on the outer part of the element. After this, the reel can be inserted into the mower.
Replacing fishing line
When the roller is working with both ends of the polyethylene thread, then the following steps need to be taken to thread the line into the lawnmower:
- Inside the reel you will see how many recesses there are for winding (two or one). If there is only one recess, then both ends of the thread will be laid along this recess. If there are two of them, then the antennae are laid out separately - each in its own recess.
- It is necessary to unwind from 2 to 4 meters of polyethylene thread and thread its two ends into the hole.
- Wind both threads in the same direction, opposite to the rotation of the drum.
- When all the fishing line is wound, the ends should be fixed in the grooves or held with your hand.
- Both ends are threaded into the eyelet on the outside of the roller body.
- After this, the drum is assembled and inserted into the mower.
Tips and steps for replacing fishing line on video.
To insert a fishing line into a lawn mower in which the reel contains two grooves, you must use the previous option for threading this polyethylene thread. In this case, each end of the fishing line will be wound along its own groove. All other actions are similar to the previous process.
The reel element or roller may have a completely different design from the previous two options. The line can be threaded through the eye, which is end-to-end and located inside the reel. In this case, there is no need to disassemble the roller drum and manually wind the polyethylene thread.
A polyethylene thread is threaded through the hole and rotated by pressing a special button. This button is located on the body and is intended for the operation of the equipment , so that it is possible to release the fishing line as it wears out.
Rules and recommendations
Do not worry that the polyethylene thread will be wound in the wrong direction, since in this design it can only spin in one direction.
Customer Reviews
The model does not make noise, starts up the first time - two pluses. practically does not vibrate, the belt is comfortable, the disc is high quality and durable.
this trimmer for 4 years now. There is an easy start system, so you don’t need to put all your strength into the jerk. As soon as you feel the resistance of the cord, give a smooth jerk and it will start. In order for the mower to work for a long time, you need to maintain the proportions of the fuel mixture. I use 20g of Husqvarna per liter of 92 petrol. The diluted mixture can be stored for no more than two weeks. When storing for a long period of time, you need to drain all the oil and run it on an empty tank to burn out the remaining fuel. I recommend working at full power, then the mixture burns completely without forming carbon deposits in the exhaust pipe and inside the engine.
READ What kind of oil is poured into the trimmer
easy start-up, minimal vibration level
I have little experience using the trimmer - only one day. But there are already impressions. I started it like this - gently pulled it a couple of times with the valve closed, which is what the instructions recommend. With one full tank I mowed a ten-meter path 2 meters wide and a square clearing 5 by 5. I consider the consumption to be normal. I filled it with 92 gasoline and branded oil for two-stroke engines. I liked the suspension system, even in space! The straps are durable. I set it up for myself in three minutes. So far I’ve only tried fishing line, but it worked well with grass. I hope that further use will provide new experience that I will share.
I was given a trimmer, so I use what I have. The area for processing is 13 acres. The first time I mowed down weeds with a disc, now I use a fishing line because I can’t get enough of it. I don’t use it often – 3-4 times a season, but I’m very glad that I have this thing, because it saves enormous time. Now I would buy such a trimmer myself.
Light in weight and in operation. Everything is very clearly described in the instructions. You can work all day. The cutting equipment is changed within five minutes.
The flexible shaft is unusual at first, but then you realize how convenient it is.
Safety precautions
To quickly and safely replace the fishing line on the mower reel, you must follow safety precautions. Before removing the reel to wind the line onto the lawn mower, you must disconnect the equipment from the power supply (if the mower is powered by electricity). Here I would like to mention the reliability rating of electric lawn mowers, which will help you choose a safe assistant.
Another important safety rule that must be followed is pressing the lock button . You can find out its location on the equipment body using the instruction manual. For example, you will find operating instructions for a manual gasoline lawn mower here.
Do not forget that the cutting element needs to be adjusted. There is an adjustment button on the body of the unit. If the process does not start automatically and the thread tension has weakened, then the button is pressed and the line is pulled out of the spool with force.
It must be remembered that replacing the line in a lawn mower is an important process that requires responsibility. Everything must be done in stages, and only a special polyethylene fishing line should be inserted into the reel. An iron cable, some kind of high-quality wire or even reinforced fishing line will not work here.
Watch the video instructions.
Trimmer Husqvarna 128R
Husqvarna petrol trimmer is due to its highest quality, reliability, ease of operation and, of course, reasonable price. This is an excellent tool for working in the garden. With its help you can take care of local parks and courtyards.
One of the main advantages of the Husqvarna 128 R brush cutter is its powerful engine. It allows you to quickly cut grass on a fairly large area. At the same time, the lawn mower practically does not vibrate, since the manufacturer used a modern, highly efficient shock absorption system. The operating noise of this model is minimal.
All gas trimmers manufactured by Husqvarna (including the Husqvarna 128 C) are equipped with a Smart Start system, which makes starting the engine easy, soft and fast. One of the main advantages of the 128 R model over others is its flexible shaft.
Results
If you have a summer cottage or a large plot of land near your individual house or cottage, then for the convenience of cleaning grass and weeds you need to use a lawn mower. If you are thinking about choosing an electric or gasoline lawn mower, then click here and you will find comparative characteristics of different models.
Over time, the line on the mower wears out and needs to be replaced - you can do this yourself. It is necessary to choose this polyethylene thread depending on the mower model. It is also worth keeping an eye on other parts of the unit; here, for example, you will find information about blades for Craftsman lawn mowers, which also wear out and can lead to irreversible consequences.
The structure of the reel into which the fishing line is inserted is very simple. But it differs depending on whether the spool is working with one or two tendrils of thread. It is important to follow safety precautions when replacing line in a reel.
Husqvarna 125R trimmer - features and benefits
This Husqvarna gas mower is distinguished by its adaptability to work in difficult weather conditions, low noise and vibration levels, as well as an increased torque reserve. The model successfully copes with intensive mowing of dense growth, clearing young bushes and cutting thick weeds.
The main characteristics of the braid include:
- built-in motor power – 1.1 l. With.;
- capacity of the standard fuel tank – 400 ml;
- the maximum permissible cutting width with fishing line is 40 cm;
- knife cutting diameter – 25.5 cm;
- generated sound pressure – 100 dB;
- working weight – 4.9 kg.
The model differs from market analogues in its simplicity of design, which greatly simplifies self-repair of the lawn mower.
Good decision
The trimmer is equipped with a disc blade and a head, which allows you to mow even soft grass, dead wood and tough growth. The rod is detachable, which allows for compact storage and easy transportation of the trimmer. This “ Carver ” lawn mower has a power of 2 hp. pp., which is sufficient for the tasks assigned to the equipment. The manufacturer equipped the unit with a two-stroke gasoline engine, the volume of which is 52 cm3. The weight of the device is not as impressive as that of the equipment described above, and is 6.7 kg. Strength and durability were achieved thanks to a six-bearing rigid shaft. This “ Carver ” lawn mower has a control system that is convenient to operate even with gloves.
The cylinder-piston group has higher wear resistance and is ready to last 4 times longer thanks to the chrome coating of the cylinder. Consumers especially note the high performance of the circular knife, because it has carbide teeth.
Sources:
https://instrument-tehnika.ru/kak-pravilno-namotaty-lesku-na-katushku-trimmera/ https://fb.ru/article/277215/trimmer-karver-otzyivyi-modeli-zapchasti
Types of trimmer heads for reels
The main element of the trigger is the mowing head, which is a cylindrical body with a reel (spool) inserted inside. The fishing line (cord) is tucked into it. The heads differ from each other in the method of feeding and threading the cord. There are three types of heads in total:
- Automatic. The line is fed after this as the user reduces the engine speed. Automatic cord feeding is very convenient when you need to do a large amount of work. The disadvantage of such a head is the high thread consumption.
- Semi-automatic. The use of such a head does not require the user to perform any complex manipulations. The principle of its operation is designed in such a way that the fishing line begins to automatically lengthen while the trimmer is operating at full speed. You just need to lightly hit the head of the device on the ground (this will remove the blockage of the fishing line), and the cord will move out of the bobbin due to centrifugal force. Then the fishing line is cut to the required length with a knife, which is located on the protective casing.
- Manual. To lengthen the cord, you need to stop the machine. After this, the line will need to be pulled out manually.
Types of trimmer reels
Preliminary preparation
First of all, to wind the fishing line, you need to remove the reel (spool, spool) from the trimmer - specific actions will depend on the complexity of the configuration and the type of the product itself:
- small electric trimmers with a working arrangement of the motor and coil in the lower part, as a rule, have side keys on both sides of the reel. By pressing them simultaneously, the upper part of the reel, along with the internal contents for winding the fishing line, is disconnected, while the lower part remains on the trimmer. It is advisable to disassemble the bobbin on a flat, smooth place so that the spring included in the structure does not jump out and get lost;
- electric and gasoline trimmers with a curved rod without the ability to install a knife, as a rule, have reels with a special wing: in such designs, you should hold the spool in a stationary position with one hand, and with the other, rotate the wing nut that secures the reel on the rod counterclockwise. After disconnecting the nut, the entire reel is removed.
- electric and gasoline trimmers with the ability to install a knife on a straight rod (for example, Stihl trimmers) have a hole under the reel. To keep the rod stationary, a screwdriver or other suitable object is inserted into this hole and, with slow rotation, such a relative position is achieved when the screwdriver enters the hole and the reel is fixed. After this, the coil body is rotated clockwise (with a left-hand thread) and removed from the trimmer.
