Advantages and disadvantages of the German household chainsaw Shtil 180

• How to Start a Stihl 180 Chainsaw
• How to Cut a Countertop at Home
• How to Clean the Carburetor of a Stihl 180 Chainsaw
• Which Circular Saw is Best for the Home
• Adjusting the Carburetor of a Stihl 250 Chainsaw with Your Own Hands

Chainsaw Stihl MS 180: properties, photos and reviews
If you decide to purchase a chainsaw, you must decide for yourself what purpose you will use this tool for. If you subject it to the highest loads, then a model that is higher in class than household representatives of similar equipment will come in handy. Nowadays you can find semi-professional saws on sale, which are farm-grade units.

With their help, you can do any type of work, but such saws are not able to withstand professional loads. If you decide that you need a professional-class model, you must find out whether all its functions will be needed in your work. Otherwise, you risk overpaying and becoming the owner of an irrational acquisition. But you should not save when you plan to operate the tool under the highest loads, because in this case, an unprofessional model will quickly fail, and all components will become unusable.

Recommendations for selection

Quite often, such devices are used as tools with which to trim knots in logging. Ms 361 fuel consumption of the Shtil 361 chainsaw. Fuel consumption of the Shtil 361 chainsaw. As for professional saws, they can be designed to work up to 16 hours a day. Their main feature is the ability to operate for 8 hours without interruption. Professional chainsaws are distinguished by the highest power, this parameter can be 2.5 kW. As for their resource, it is equal to the limit from 1300 to 2000 engine hours. If we consider household models, the resource will be 3 times lower.

Modern manufacturers also offer special-purpose saws for sale. They have an unusual design that allows you to do work inside and outside the tree crown. Such models are characterized by a good center of mass location and low weight. They are also popular because they are easy to maintain and have a highly effective anti-vibration system.

If you still can’t decide which chainsaw model to choose, you can turn your attention to the Stihl MS 180, the properties of which will be discussed below. In order to make the right choice, you should also study reviews. Their consumers quite often talk about the operational features of the equipment.

Description of the Shtil MS 180 chainsaw

You can purchase the above-mentioned model for 13,600 rubles. It can be used during small construction or in a garden plot. The saw has proven itself to be excellent when pruning fruit trees and preparing firewood.

The model is easy to maintain and operate. Stihl chainsaws, reduced fuel consumption The stihl ms 361 chainsaw has optimal. It has an effective anti-vibration system, which ensures comfortable and fatigue-free work. Stihl MS 180 has a lubrication system that significantly reduces oil consumption. The base of the handle is quite large, which means safety, which will come in handy if the chain breaks. An additional chain is included in the kit.

Feedback on operational features

Consumers, in their words, quite often choose the chainsaw described in the article for the reason that it has an abundance of advantages.

Among them we should highlight:

• comfortable control;
• the presence of a compensator in the design;
• anti-vibration system;
• reduced oil consumption;
• ensuring safe work.

As for comfortable control, it is expressed in hot and cool starts. Operation and shutdown of the equipment is done with one lever. Original professional and household chainsaws Stihl, fuel consumption stihl ms 361. tire. Chainsaw stihl ms 180. design and characteristics. Stihl MS 180 has a compensator in the carburetor. This element is capable of maintaining fuel consumption and constant power. Consumers especially highlight the anti-vibration system. Repairing a Stihl chainsaw is not difficult, stihl 361. It has reduced fuel consumption. It protects a person’s hands from poor circulation and hand diseases.

Oil consumption is also important; it is halved. The oil pump, guide bar and saw chain form one system that uses oil quite sparingly. Any drop goes directly to where lubrication is required. By choosing the Stihl MS 180, you can be sure that working with equipment will be safe.

STIHL MS 180 HOW TO ADJUST THE CARBURETOR How to adjust carburetor STIHL chainsaw MS 180

How to adjust the carburetor Stihl ms 180

what are the min and max speeds? Also a similar video about adjustment on mine.

My Stihl MS 180 chainsaw, operation, reviews, pros.

My Stihl MS180 chainsaw

, operation, reviews, advantages. Chainsaw video: How to start a chainsaw. Preparation.

In just a few seconds, a safety mechanism is activated that stops the saw chain if the front stop is pressed. Kickback may also occur during operation, but the chain brake will operate automatically. Consumers consider additional advantages to be low weight, the highest quality of chain production, a fairly impressive length of the bar, and a well-thought-out design that allows for the possibility of installing devices.

Technical characteristics of the chainsaw

Stihl MS 180, reviews of which you could read above, according to consumers, has quite outstanding technical properties. Among them, a 40-centimeter tire should be highlighted, as well as an impressive oil tank volume of 0.145 liters. This tool belongs to the household class. It has 55 links, the width of its groove is 1.3 mm. The unit weighs 3.9 kg, which does not put an impressive load on the hands. The fuel tank capacity in the design is 0.25 liters. The power of the equipment is 1.5 kW, which is 2 liters. With. The chain pitch is 3/8 inch. The tire length is 16 inches. The kit includes an NGK BPMR 7A spark plug.

How much oil should be added to gasoline?

Types of oils used for dilution in gasoline
Chainsaws do not have oil pumps, so the combustible mixture alone cannot be used. You should carefully read the instructions supplied by the manufacturer with each product. There is a lot of information on the Internet, finding it is not difficult.

If there is no lubrication, the saw will fail in a short time. It is recommended to do preventive maintenance of the unit, fill with properly diluted fuel, in this case the tool will function for many years.

You should carefully read the recommendations from ), they always describe in detail what composition is required for the power plant. There is no point in saving on oil, the benefit is small, and the engine life can be significantly reduced. Repairing an instrument is expensive, up to 85% of its cost.

If we take, for example, a Husqvarna chainsaw, then unleaded gasoline with the first additive of grade 92 is suitable. If the composition has a greenish color, then this indicates that the product is “Premium”. AI-92 is the optimal product that can be suitable for such a device. On average, professionals advise adding from twenty to 50 ml of machine oil per liter. If the power of the unit is one and a half kilowatts, then only 25-27 ml of oil will be required.

Expert opinion Kuznetsov Vasily Stepanovich

If the tool is more powerful, then about 30 ml of oil is required, and in some cases even more.

How to dilute engine oil and gasoline, in what proportions? This question arises for all users. First you need to stock up on containers:

The process of mixing oil and gasoline is technologically simple

It is important to follow safety precautions so that static electricity does not accumulate and not a drop of water gets into the fuel

Types of oils used for dilution in gasoline

What proportions should be made? Engines are mostly two-stroke, so the mixture is usually 1:50. Russian-made chainsaws operate with products of the following brands:

• M8-B
• M-12TPU

• TP
• MGD-14M

For foreign analogues, it is permissible to use two liters of gasoline per 80 grams of oil. Foreign saws are characterized by economical fuel consumption; the proportions of oil in them vary from 40 to 49 parts.

Oil shades can vary significantly; this should be taken into account during operation. For example, it produces reddish-colored machine oil. If the composition has a greenish (sometimes blue) tint, then this is a sure sign that the product is premium synthetic. The quality of such compositions is high, and the cost is also quite high.

Gasoline consumption Husqvarna chainsaw

What kind of gasoline to pour into a popular brand of chainsaw?

A chainsaw is a successful unit that can solve a lot of household problems. It runs on fuel, which must be prepared independently before pouring it into the tank. Those who have acquired a functional device for the first time are interested in the question of what kind of gasoline to pour into the chainsaw. You can avoid breakdowns and extend the life of the device only if you follow the manufacturer’s advice indicated in the annotation.

What kind of gasoline should I use?

Modern brands of chainsaws (Husqvarna, Partner) from foreign manufacturers will run uninterruptedly on AI-92 gasoline - it is ideal for the engine

The owner's manual may also indicate grade 95, but this should be poured with care. The quality of this gasoline is currently being questioned; its octane number is increased with the help of various additives

This is detrimental to the chainsaw engine, which can lead to major repairs of the unit. And its cost will be at least half the cost of the new model, not counting spare parts that need to be replaced.

For devices from domestic manufacturers (Ural, Shtil, Druzhba), AI-80 gasoline is recommended

It is important for the user that its consumption is minimal

Proportions of gasoline and oil

Due to the two-stroke type of engine, fuel is purchased separately in its pure form, and then mixed with oil intended specifically for this engine version. Most experienced users mix substances in proportions of 1:50. In the photo you can see popular high quality products used to prepare the fuel mixture.

Important points to observe:

• domestic chainsaws (Ural, Shtil, Druzhba) work with an oil component of the M8-V, M-12TPU, M8-V, TP, MGD-14M brands, sometimes foreign versions can be used; recommended proportion – 100 g of oil per 2.5 liters of AI-80 gasoline;
• foreign models (Husqvarna, Partner) operate on foreign-made oils (1:50 or 1:40) and are characterized by a minimum consumption.

Ordinary Chinese chainsaw

. I work moderately. No tricks. I pour 35-40 grams of oil per 1 liter of gasoline. Oil

chainsaws

Minsk MTZ 4200 how much gasoline

.

How to properly prepare the fuel mixture

When purchasing gasoline for a chainsaw and oil, you should think about additional accessories. To measure and be able to pour the mixture into a chainsaw, use the following tools:

• container for dilution (plastic or metal),
• syringe,
• measuring bottle (suitable for measuring gasoline),
• dispenser,
• watering can (pour into the chainsaw).

A very convenient thing is a special bottle with a dispenser from the Stihl brand (pictured), which allows you to perform all actions accurately and quickly, accurately measuring the required amount of each substance. What kind of gasoline to pour into a popular chainsaw (Husqvarna, chainsaw gasoline consumption

When choosing gasoline for a Shtil chainsaw (Friendship, Husqvarna, Partner), you should pay special attention to the second component

Oils from different manufacturers have variations in shades. HP's products are red, the premium synthetic segment is mainly represented by green. If you take gasoline for a Husqvarna chainsaw, then the oil must be of the appropriate brand, not cheap (green or blue in color). In the video you can watch the process of mixing fuel.

Useful tips

Experts and manufacturers do not recommend preparing large volumes of fuel and storing it for a long time. Oil and gasoline can “behave” differently in a mixture, it all depends on the brand, quality, degree of additives and additives. Oxidation and crystallization processes occur. The result can be disastrous and incur additional financial costs for the user: incorrect operation or engine failure.

Fuel is prepared for a maximum of three refuelings, mixed in containers made of metal or durable plastic. Ordinary plastic breaks down when it reacts with gasoline, spoiling the composition of the fuel and creating the risk of sudden ignition.

Chainsaws, gasoline, oil and its consumption

L + + + Note: When determining these standards, it is assumed that the mechanism operates 50 - 60% of the working time. CONSUMPTION RATES OF LUBRICANTS FOR GASOLINE SAWS (BASED ON THE AMOUNT OF PETROL GASOLINE USED) TTT ¬ ¦Saw brand¦For¦For lubrication of the saw¦Consistency¦ ¦¦preparation of ¦apparatus¦lubrication¦ ¦¦working mixture ¦¦¦ + + + + + ¦»Husqvarna » <1¦2%¦50%¦0.2%¦ + + + + + ¦"Taiga"¦5%¦35%¦0.2%¦ + + + + + ¦"Friendship"¦5%¦2 %¦0.2%¦ + + + + + ¦”Ural-5″¦5%¦16%¦0.2%¦ + + + + + ¦”Secor-3″¦5%¦-¦0.2 %¦ ¦("Secor-44")¦¦¦¦ L + + + <1 When using special Husqvarna oil. GASOLINE CONSUMPTION RATES in LITERS PER VEHICLE HOUR IN CUTTING CUTTING AND CLEARING TT ¬ ¦Saw brand¦Engine power,¦Consumption rate top¦ ¦¦hp/kW¦liv, l/motor.

How to eliminate the risks of purchasing counterfeit goods? Purpose of the oil

• ICE power – 2.3 kW/3.1 l. With.;
• chain rotation speed at idle/maximum speed – 2,800/10,000 rpm;
• fuel tank – 470 ml;
• recommended tire length – 35–40 cm;
• chain pitch – 3/8 “;
• weight including saw set – 4.7 kg.

Product manufacturer STIHL

The history of the STIHL brand dates back to 1926, when Andreas Stihl founded. Initially, the company specialized in creating working boilers and the first “washing machines”, and later, with the money earned, the first model of a chainsaw was created. This unit, despite its enormous weight (48 kg), quickly conquered the market and began to be sold very successfully to countries near and far abroad.

The 90s marked the beginning of a family business for the company. Almost all members of the Stihl family began to take part in the life of the company.

In 1995, the AG&Co Holding was created, the main base of which was in Waiblingen and Diesburg.

Since 2002, a complete stranger has become the head of the board of directors of STIHL AG. At that time, boss Hans Peter Stihl headed the company's supervisory board and took over the chairmanship of the commission of STIHL Holding AG&Co.

After another 2 years, the company’s modern development center opened, and already in 2006, a new assembly plant started in China.

Today, the company is successfully developing, introducing new ideas and even more practical approaches into its work. STIHL's inventions top the chainsaw ratings in terms of reliability.

Step-by-step instructions and operating instructions

Next, simply follow the step-by-step guide for the Stihl 180 chainsaw:

1. Before starting, you need to press the chain brake forward, thereby activating it;
2. Get rid of the tire protective coating;
3. Press the quick start decompression valve and fuel pump;
4. Take care to set the combination lever in the "cold start" direction;
5. Place the chainsaw on a flat surface, step on its handle with your foot to improve its stability;
6. Pull the starting rope slowly towards you, and then pull it quickly a couple of times;
7. Place the throttle at half throttle and pull the starter rope again;
8. After starting the saw, press the gas and lift it off the ground;
9. Release the chain brake and check the quality of lubrication of the working chain by giving full throttle to the device over a sheet of light paper (if drops of oil appear, the saw is working normally);
10. The saw can be used in accordance with the regulations.

For more details, watch the video:

For information on how to sharpen a chainsaw chain with a file, see here.

Chainsaw fuel

B 33 Chainsaw Stihl 025; sawing trees (2.3) 1.0 B 34 Chainsaw Stihl 044; sawing trees (3.8) 1.5 B 35 Chainsaw Stihl 066; sawing trees (4.8) 2.3 B 36 Chainsaw Stihl 250, MS250; sawing trees (2.3) 1.0 B 37 Chainsaw Stihl MS170; sawing trees (1.3) 0.7 B 38 Chainsaw Stihl MS180; sawing trees (1.5) 0.7 B 39 Chainsaw Stihl MS230; sawing trees (2.0) 1.0 B 40 Chainsaw Stihl MS260; sawing trees (2.6) 1.0 B 41 Chainsaw Stihl MS270; sawing trees (2.6) 1.0 B 42 Chainsaw Stihl MS361; sawing trees (3.4) 1.2 B 43 Chainsaw Stihl MS440; sawing trees (4.0) 1.6 B 44 Chainsaw Stihl MS460; sawing trees (4.4) 2.6 B 45 Chainsaw Stihl MS660; sawing trees (5.2) 2.1 B 46 Chainsaw Taiga-245; sawing trees (2.6) 1.6 B 47 Band sawmill Horizont Husqvarna (5.2) 3.0 B Notes: 1. B – gasoline. 2.

Application of fuel consumption standards for special equipment (lawn mowers, chainsaws, generators)

How to apply fuel consumption standards for special equipment (lawn mowers, chainsaws, generators, etc.)?

In accordance with subclause 1.2 of clause 1 of Article 171 of the Tax Code of the Republic of Belarus (hereinafter referred to as the Tax Code), standard costs include the costs of paying for the cost of fuel and energy resources spent within the limits established in accordance with the law.

The Council of Ministers of the Republic of Belarus, within the powers granted by the Law of the Republic of Belarus dated 01/08/2015 No. 239-3 “On Energy Saving”, makes a decision on rationing, by adopting acts of legislation, fuel consumption for motor vehicles, ships, machines, mechanisms, equipment in transport activities and others named cases.

Consequently, fuel rationing at the legislative level is carried out in cases where the procedure for developing, establishing and revising standards by adopting the appropriate regulatory legal act is established by the Council of Ministers. In the absence of an instruction from the Council of Ministers to adopt the relevant normative legal act, the norms are determined independently.

Taking into account the above, until 2022, when calculating profit tax in the costs taken into account when taxing profits, the organization has the right to include the cost of fuel for the specified special equipment, consumed within the limits established by the head of the organization independently, in the absence of an indication from the Council of Ministers of the Republic of Belarus on the need to establish fuel consumption standards for machinery, mechanisms and equipment at the legislative level by adopting the appropriate regulatory legal act.

The specified procedure for taking into account the cost of fuel and energy resources when taxing profits is set out in the letter of the Ministry of Transport and Communications of the Republic of Belarus, the Ministry of Taxes and Duties of the Republic of Belarus dated November 19, 2019 No. 08-02/10583/2-2-10/02529 “On some issues fuel rationing."

From 01/01/2020, in accordance with paragraph 6 of the Decree of the President of the Republic of Belarus dated December 31, 2019 No. 503 “On Taxation” (hereinafter referred to as the Decree), the costs of paying for the cost of fuel for motor vehicles, ships, machines, mechanisms and equipment consumed in within the limits of the standards established by the head of the organization independently or by contacting an accredited testing laboratory, are included in the standardized costs.

Thus, at present, on the basis of paragraph 6 of the Decree, organizations have the right to include in the standardized costs when calculating income tax the cost of fuel for the special equipment specified in the question, spent within the limits established by the head of the organization.

Additionally, please note that the Order of the Ministry of Transport dated September 10, 2012 No. 467-Ts contains fuel consumption standards for chainsaws, chainsaws, lawn mowers, brush cutters, loppers, etc., which can be used as a guide when establishing fuel consumption standards for special equipment by the head of the organization.

Structure of the Shtil MS 180 chainsaw - model components

The design of the Stihl MS 180 chainsaw can hardly be called simple - this is due to the operating features of this model. The Shtil 180 chainsaw consists of the following components:

• Ematic guide rail;
• Oilomatic's own saw chain;
• Air filter;
• Throttle valve;
• Cold and hot start lever;
• Control lever;
• Spark plug;
• Handle with proprietary vibration suppression system,
• Powerful engine with extended service life.

The manufacturer took into account the possibility of regular operation of the chainsaw at low temperatures, which resulted in the presence of a proprietary system for smoother and faster engine starting.

NEW Service kit. Purpose of the chainsaw

• Turn on the ignition (how to set the ignition on a Shtil 180 chainsaw is indicated in the device passport).
• Set the control lever to its lowest point (this will allow the carburetor choke to cut off air from the filter and keep the throttle fully open, allowing the fuel mixture to richen).
• Pull the starter handle, this must be done several times before the first flash passes. This will signal that the mixture has entered directly into the cylinder, and your unit is ready to start.
• Now you can move the lever up one section, while the throttle valve will remain in the same position and the air valve will open.
• All you have to do is pull the starter. At the same time, the Stihl MS 180 chainsaw will operate at higher speeds.

Chainsaw device Shtil 180

The design of the Stihl 180 is characterized by simplicity, as well as high quality parts and assembly. The model is equipped with a 2-stroke gasoline engine with a volume of 31.8 cm3. The internal walls of the cylinder and the piston group of the internal combustion engine are coated with a protective substance made of chromium alloy. This extends the life of the engine and makes it resistant to corrosion. Recycled exhaust gases from the engine enter the muffler, which is diverted away from the operator. Among the advantages of the motor are high reliability, good torque reserve, and durability. The internal combustion engine does not require special care. All that is required from the owner is to use high-quality fuel and oil.

The forced air supply system is responsible for cooling the engine. The proprietary Ematic lubrication system evenly distributes oil throughout the engine parts. This allows you to extend their service life while saving engine oil. To dampen vibration, the Stihl 180 chainsaw is equipped with several dampers that absorb engine vibrations.

To prepare the fuel mixture, a carburetor is provided in the saw device. The special design of this unit allows you to reduce fuel costs without loss in the efficiency of the chainsaw.

The tool is started using a manual starter. The spark plug and the ignition system are responsible for igniting the fuel in the chainsaw cylinder. The drive sprocket receives torque from the motor through a durable clutch system.

The working parts of the model are represented by a saw bar and a chain. To adjust the position of the chain on the bar, the saw is equipped with a side sprocket. It allows you to adjust the chain tension level without additional tools. A toothed stop can be installed at the front of the tool. If necessary, instead of a tire for working with a saw, you can use various attachments in the form of a drill or grinder.

The tool comes with guards that protect the right and left hands of the feller. To protect the chain from breaking, the tool is equipped with an effective inertia brake. It is instantly triggered when the chain hits a nail or other hard object,

All spare parts and working mechanisms of the Stihl 180 saw are placed under a durable plastic case. It provides easy access to the spark plug, gasoline and oil reservoirs, as well as all screws and springs. This makes it easier to maintain and repair the tool yourself.

The model's controls are represented by a button to turn the ignition on and off, a lever for switching the throttle position, and a gas lever. On the side of the tool there is a handle and a starter cable.

The Stihl 180 chainsaw circuit is as simple and effective as possible. Thanks to its ergonomics, lightness and small dimensions, the tool can be used not only by experienced fellers, but also by novice gardeners. During operation, the German chainsaw Stihl MS 180 will show high efficiency, regardless of weather conditions and the assigned tasks.

Device

The Stihl MS 180 chainsaw has a fairly simple design, intended for use by users without specific experience. The saw carburetor is designed in such a way that it is not possible to adjust it to the maximum number of engine speeds. The only available adjustment screw is responsible for stable idle operation.

The saw consists of the following structural elements:

• engine;
• starter;
• flywheel, also known as cooling fan;
• ignition module;
• clutch;
• saw chain brake mechanism;
• carburetor;
• air filter with replaceable filter element;
• oil and fuel tanks;
• muffler;
• side cover with chain tension adjustment mechanism;
• control handle and saw handle.

Let's look at the structure of a chainsaw and how the main elements work in more detail.

To start the Stihl chainsaw, you need to pull the starter cord.

The starter transmits force through the flywheel to the crankshaft and drives the piston. At this moment, under the influence of an air pulse from the engine crankcase, transmitted through special channels to the carburetor, the fuel pump begins supplying gasoline and oil to the carburetor, where a fuel-air mixture is formed and supplied under the piston.

At the same time, when the piston is at TDC (top dead center), an electrical discharge is supplied from the ignition coil to the spark plug, which ignites the fuel mixture under the piston in the cylinder and forces the piston to move down, thereby making a power stroke.

After a successful start-up, the saw cyclically repeats all work processes and works stably.

Let's consider how the force from the engine is transmitted to the drive sprocket and causes it to rotate the saw chain. For this purpose, a gasoline saw has a centrifugal clutch, which is installed inside the drive sprocket and is rigidly fixed to the engine crankshaft.

As the engine speed increases, the clutch opens and, resting against the sprocket body, transfers force from the engine crankshaft to it, forcing it to rotate the chain mechanism.

The next element is the saw chain brake. The brake device is quite simple and consists of a control lever and a metal plate that wraps around the drive sprocket and is installed in the saw body. In the working position, the chain brake plate securely holds the drum sprocket.

Technical characteristics of the Stihl 180 chainsaw and its modifications

The Stihl MS-180 chainsaw is available in 2 modifications: with a bar length of 35 and 40 cm. The characteristics of the chainsaw allow it to be classified as an entry-level one with increased performance. Device specifications:

1. Power - 1.5 kW, 2 l. With.
2. Engine capacity: 31.8 cm³.
3. Oil tank - 145 cm³.
4. Weight - 3.9 kg.
5. Chain pitch - 9.3 mm.
6. Fuel consumption rate per hour is 0.7 liters.
7. Fuel tank - volume 250 ml.
8. Manual start.

The parameters of the tool are superior to models of a similar price category. To increase the service life of the Shtil MS-180, it is necessary to properly maintain it: add oil on time and use high-quality consumables. To sharpen the chain on the MS-180 16″ Picco model, it is recommended to use a 4.5-5 mm file.

Additional electrical equipment options make work safer and more comfortable:

• quick chain tension using a simple mechanism - an adjusting wheel;
• the side chain is pulled through the sprocket cover;
• A special built-in mechanism prevents jerky jerks when starting the engine.

The manufacturer has carefully thought out the location of the levers and the handle. Their shape eliminates muscle tension during prolonged work.

Video: Stihl 180 High Fuel Consumption

Appearance of Stihl MS 361 seen

Fuel consumption of the Calm 361 chainsaw

The fuel mixture consumption for the Calm 361 chainsaw depends on the intensity of use of the device. Under normal conditions, a full tank of fuel lasts for 20-30 minutes. Please note that when using a heated handle in winter, the flow rate will increase slightly.

The fuel mixture is prepared at the rate of 1 part oil and 50 parts gasoline using Stihl brand oils. When using oils from other manufacturers, the oil requires twice as much, that is, you will need 25 parts gasoline to 1 part oil.

Stihl MS 361 saw at work

Chainsaw Reviews 361

Egor I have had this model since 2002. How many forests fell with her. I can't count. My original tire still works. Last year in 2015 I replaced the carburetor. I didn't even clean it with an ultrasound. That same year, a rubber hose burst from old age to the carburetor, and through clamps and iron pipes I put inside what was on hand from auto parts. I don’t remember how many stars I pushed, how much I changed. but it takes 3-4 years if it works all the time, very high quality materials. I really liked the file. Everything works without loss of power. At one time she was making two or three truckloads of wood for her a day. Amazing car. Very reliable. Like all styles, it continues to work in idle years. The air filter is very well made. Andrey For a lumberjack, this is a legendary tool, as you yourself know, for many armies of the world. Good power-to-weight ratio, lightness and ease of maintenance, durability, reliability. In 12 years of forestry, a couple dozen 361 calms have passed through my hands. Everything worked well. Apart from minor repairs and replacement of consumables, I have no memory problems. And I have something to compare with. The saw is more reliable than the 440, 461 and many tracks. However, I still bought the dust I purchased in 2006 in working order. Using it in 2010, I changed the needle in the carburetor (bad wear), it cut at least 300 cubic meters of firewood from 25-30 cm blocks of wood. At one time, this saw helped me pay off construction loans. I didn't find any flaws because I compared the 2005 and 2015 saws and was stunned. The model has not changed in 10 years of production. For 10 years. It turns out there is nothing to improve. I currently have 7 Calm 361 MS exercises purchased last October. They work every day and each comes with a one-year warranty. One saw was sent to the Recreation Center, a carburetor was made, but everything was fixed, there were no problems with the rest. Timur File is just super. The main advantage is its high power, it allows you to cut wood with the thickness of the entire bar. It's fast and clean. Main. This is to keep the chain sharp and the oil path clean. This is very convenient for cleaning the air filter. Removing the candle is too quick and convenient. Gas and oil tank plugs are also handy. There were no problems with the pollen factory. In the summer I don’t even turn off the gas completely on cold dust. Simply turn the ignition on and pull the starter several times. The disadvantages include the heavy weight, but its power is normal and the saw is perfectly balanced. High power, ease of use, reliability, low vibration. Low fuel consumption

Impression of the availability of official information

Recommended sequence

In accordance with the standard technology for preparing the fuel mixture, the calculated amount of oil is poured into a tank half filled.

The mixture is thoroughly mixed with the plug closed, after which the remaining gasoline is poured. This sequence contributes to the homogeneity of the resulting composition.

It is advisable to prepare fuel for a chainsaw in quantities sufficient to perform one-time work. The finished composition can be stored at a standard temperature of 20°C for no more than one month. At higher temperatures, the shelf life is reduced to 2 weeks.

An expired mixture initiates the formation of resinous compounds, which contribute to clogging of the jets, the formation of carbon deposits and limiting the mobility of the piston rings. In order to save money, the overexposed composition can be consumed by adding up to 15-20% of the total volume to the fresh mixture.

Gasoline engine design for chain saws

Chainsaws, like most other similar equipment, use two-stroke internal combustion engines.

Their main advantage over four-stroke engines that are used in cars is the fact that for 2-stroke engines it is possible to produce one and a half times more power with the same volume.

But there are also disadvantages - chainsaw oil must be added directly to the fuel tank, which increases oil consumption. As a result, the mixture of oil and gasoline, when burned in the working chamber, turns into oil mist, which settles on the cylinder walls and lubricates the elements of the connecting rod and piston group.

Oil for 2-stroke chainsaw engines is diluted in a certain proportion with gasoline and poured into the tank. When the gasoline in the tank runs out, it is necessary to prepare a new mixture. However, you cannot use car oil in a chainsaw - special oil for two-stroke engines is required.

Why doesn't oil flow to the chainsaw chain?

If oil does not flow to the chainsaw chain at all, it means either the oil pump drive itself has failed, or there are problems with air leaks.

Oil pump failure. If, when the oil pump plunger adjustment screw is unscrewed, oil is still not supplied to the chainsaw chain, then the drive, which is a plastic ring with grooves, has broken down. Over time, the grooves can wear out and the drive will fail, after which it will simply have to be replaced. The hose that supplies pressurized oil to the chain has collapsed or worn out. You need to re-attach it to the fitting or replace it. The grooves through which oil is supplied to the chainsaw chain are clogged - this is the most common occurrence. They need to be cleaned, after which the supply will resume.

Criteria for choosing engine oil

To independently prepare a flammable mixture, use the heat-resistant branded motor oil recommended by the manufacturer in measured quantities.

• The specificity of this lubricant is its use in high-speed air-cooled internal combustion engines, which are equipped with household and professional-class chainsaws.
• Depending on the season, motor oil of different densities is used to prepare the combustible mixture, which retains its operating properties in the temperature range indicated on the label.
• Branded oils are recommended for use, providing complete lubrication of the piston group and connecting rod and crank mechanism in all operating modes of the power unit.
• Branded products differ in color. In particular, Shtilevsky mineral oils are red, while synthetic oils are colored green. Husqvarna branded motor oils are blue or green.

Even taking into account the lower cost of mineral oils, it is recommended to take advantage of the advantages of synthetic analogues to prepare a high-quality fuel mixture.

Summing up

In order for your chainsaw to serve for many years, never fill it with old gasoline, and you don’t need to use grade 95, much less 98, gasoline to prepare the fuel mixture, only 92. Also, don’t forget about the purity of the gasoline—no dressing up!

I hope now you are not wondering which gasoline is suitable for a chainsaw and which is not so good.

What kind of oil to put in a chainsaw?

Manufacturers themselves do not produce lubricants, with rare exceptions, but they cooperate with all well-known brands and often offer their products under their own label.

Therefore, in the passport you will definitely find a mention of which 2-stroke chainsaw oil is suitable for this specific model.

Product reserve

• PRESENT
• Description
• Characteristics
• Documentation
• Reviews (3)
• Accessories

When purchasing a product - a gift!

Please notify the operator of your desire to participate in the promotion, or when creating an online application, write “I want a gift” in the comments.

Description

Husqvarna 236 chainsaw in an orange case is a universal tool with low weight and optimal functionality for sawing logs, harvesting firewood and other household needs. The patented Swedish X-Torq® engine revs higher and delivers up to a fifth less gas mileage than previous models.

The smart start system guarantees quick start of the engine, long-term operation of the device is maintained at high speeds without any failures. The saw has a 35 cm long bar (a 40 cm one can be installed), an air purification system to protect the carburetor, a fuel pump for charging and a chain tom function. LowLib® vibration suppression reduces the risk of white finger syndrome.

Husqvarna cares about the environment, so it has revised the technology of its chainsaws and reduced emissions from operation by ⅔, which makes them safer for the user’s health.

Includes: Husqvarna 236 chainsaw + additional chain. The total weight of the package is 5 kg.

*From January 2022, the product has been renamed and is supplied under the name: 120 Mark II

Features of the Husqvarna 236 model

Characteristics

Documentation

Reviews (3)

Great price (bought on sale), low gas mileage with good power, no vibration, comfortable grip. A well-thought-out system for supplying chain lubrication; the filter is easy to remove and clean. The oil is diluted one to fifty, so it lasts for a very long time.

I was pleased with the luxurious equipment: - additional chain - protective cover for the tire - universal screwdriver - documentation, warranty card.

It seemed heavy to me (compared to the calm 180), although it was quite comfortable to work with. The on/off buttons don't look very reliable. The sawdust scatters in different directions, it doesn’t interfere with itself, but if someone stands nearby and helps, it will fall under the attack)

I thought for a long time between the Swedish Husqvarna 236 and the popular Shtil 180, which is assembled by the Chinese. I chose Husqvarna and I don’t regret it.

The new X-Torc engine really saves fuel! It starts the first time, or at most the second time (if it doesn’t start, you have crooked hands). Recently a tree fell in a storm and it was just time to test the saw in operation. Thick branches, sawing branches with a bang, birch is harder, but even at partial speeds, chips fly to the sides just like that! The volume of the tank is 0.3 liters, after cutting a large trunk into logs it decreased quite a bit.

When running in, I recommend keeping an eye on the chain tension; the first few times it will tighten, and then you will think about it less often. At idle, you may experience a feeling that the engine is running poorly (it stalls or turns excessively) - this is regulated with a key (as written in the official instructions).

Oil does not drip (as some complain), it is supplied regularly and in portions to the chain itself, and nothing flows when turned off.

The vibration suppression system is a very convenient development, your hands do not shake, and each branch does not create recoil. It fulfills its function 100%.

In general, I liked the chainsaw. Luxurious assembly + spare tire (if you are offered to buy it separately, don’t be fooled, even on the box it says that an additional chain is included). The 2 year warranty is also nice.

Now I drink a little, but I have no complaints about the saw. I hope after a small rollback it will become even more stable.

The price is adequate for the quality, there are no vibrations, two chains (main and spare), good assembly, little fuel is consumed.

I didn’t like the instructions, I figured it out myself using test and error.

At first I read a lot of reviews and doubted whether it was worth taking. They wrote that there are a lot of problems with oil and starting, but I feel sorry for wasting money on an unreliable device. In the end, I still bought it out of respect for the Husqvarna brand (friends spoke well of their equipment), and so, in the end, I didn’t encounter any problems. NO oil flows! Fill up with normal, native stuff for 500 rubles/liter and don’t be greedy. The chain receives exactly as much as it needs; I have never noticed any puddles under the saw. About the difficulty of starting is also nonsense, pour as expected 1 to 50, not 30 (I did that at first too) and - oh, miracle! the engine will start with half a kick. Whether cold or hot...

In short, the saw is a beast!! If I choose in the future, then only Husqvarna.

Quiet and does not vibrate, consumes little fuel, very good price.

Oil leaks a little, like most non-professional chainsaws.

Not my first saw, I still have the Stihl 180 model in stock, so I have something to compare with. Compared to the calm, gasoline consumption is tiny. It weighs more, but for a normal man such weight is a complete trifle. The saw is surprisingly quiet, no inconvenience to neighbors. Your hands don’t tremble after sawing, it cuts wood very easily, and it starts right up. The external coupling and plugs where the fuel mixture is poured are more convenient than those of Shtil.

The chain oil leaks, which is sometimes very annoying; I store the saw on its side.

If you find an error or inaccuracy in the text or product description, highlight it and press Shift+Enter.

Chainsaws Partner and Shtil, their adjustments.

In Shtil and Partner chainsaws, adjusting screws H and L set the proportion of air and gasoline in the mixture. When the screws are loosened, the mixture becomes richer and the speed increases. Screwing leads to a leaner mixture and, accordingly, a decrease in engine speed.

Setting the carburetor of the Partner chainsaw to idle speed is carried out using screw T (Shtil marks this adjustment with the letters LA). Basic tool adjustment is done at the factory during final testing. In most cases, the carburetor is adjusted to supply a slightly richer air-fuel mixture than the optimal calculated one. The settings set by the manufacturer must be saved during the first few hours of operation, during the break-in period. After this, finer adjustments can be made, although this is not necessary; the saw will work normally at the basic settings.

For fine adjustment of the carburetor, a tachometer is required, in addition, technical documentation will be needed in order to carry out work in strict accordance with the manufacturer's requirements. The best solution would be to entrust the fine tuning of fuel equipment to specialists.

If you still decide to adjust it yourself, you should start with screw L, then move on to jet H, after which you set the idle speed by rotating screw T (or LA - if it’s a Stihl saw).

By smoothly turning screw L in both directions, a position is sought at which the idle speed will be maximum. Once this point is found, you need to unscrew screw L 1/4 turn. If the chain continues to move while the engine is idling, screw T (LA) is slowly unscrewed until the chain stops.

After setting the maximum speed with screw H, the value of their frequency is checked using the tachometer. If the maximum rotation speed does not correspond to the values ​​​​specified in the documentation, the adjustments are repeated. If at maximum speed the mixture is too rich, too much smoke comes from the muffler; if the mixture is lean, the saw makes a squealing sound and the engine heats up excessively. The adjustment ends with setting the idle speed - the position is considered correct if the engine runs exactly at minimum speed and the chain is stationary. The idle speed setting can be seen in the video below.

Almost any Chinese chainsaw has the same adjustments as its branded counterparts. The same screws L, H and T are present. Sometimes there are saws in which only the idle speed can be adjusted. However, according to reviews from owners and service workers, not every chainsaw can be adjusted without problems. Even for experienced repairmen, some models can take a decent amount of time before getting an acceptable result.

The standard position for “Chinese” carburetors is the position of the screw L, at which it is loosened by one and a half turns from the fully clamped position. For screw H - one revolution from the same state. In many videos, screw L is called adjusting the quality of the mixture, and screw H is its quantity. The idle speed is adjusted in the same way as described above on a warm engine.

Setting up the carburetor model

The professional chain saw Stihl MS 250 requires carburetor adjustment in the following cases:

• when the engine is unstable at idle speed;
• in the case when the internal combustion engine starts and immediately stalls;
• with a sharp increase in the volume of fuel consumed;
• with a noticeable increase in vibration of a running engine.

Adjustment of the fuel unit is performed in the following sequence:

1. First, screws H and L on a chainsaw with a cold internal combustion engine must be tightened clockwise until it stops. After this, both screws must be turned 1 turn in the opposite direction;
2. Next, you need to start and warm up the chainsaw engine. The operator must then press and hold the throttle trigger. At the same time, by turning screw H, you need to achieve the maximum engine speed indicated in the instructions for the saw. They should be 10,000 rpm;
3. Then you need to adjust the operation of the saw chain. To do this, the standard LA screw must be turned so that the chain begins to rotate slowly. After this, the LA bolt will need to be turned 1/4 turn counterclockwise.

A chainsaw with a properly configured carburetor should operate as stably as possible in any mode. The volumes of fuel consumed and exhaust gases emitted after adjusting the unit should be reduced. Otherwise, the carburetor adjustment will need to be repeated.

Advantages and disadvantages

For private work, the tool shows good performance. The saw becomes a reliable assistant in woodworking, felling trees and removing excess branches. The model proved to be excellent in the construction of log houses and the arrangement of landscape elements made of wood.

The main advantages of the model:

1. Price/performance ratio.
2. Reliable mechanisms, durable materials, a minimum of elements that can break.
3. Ergonomic handle shape. High-quality balancing of the body.
4. Well designed levers and control system.
5. Effective vibration suppression system, low noise level.
6. Easy starting at low temperatures.
7. During repair work, it is easy to reach the main parts of the mechanism.
8. Ensuring high worker safety even when sawing hard-to-reach objects.
9. The manufacturer has provided an effective security system and removed settings that were unnecessary for inexperienced users.

The device has good technical performance for an entry-level saw. The manufacturer did not skimp on materials, carefully thought out the control system, and provided an effective security system. Additional options prevent vibration and uncomfortable jolts when starting the engine. Reviews about the Stihl MS-180 C-BE reveal the main drawback - the device is demanding on the quality of consumables and their high cost.

Self-selection criteria

Fuel for a stihl chainsaw or another model should be purchased exclusively taking into account common recommendations. These include:

If fuel is used that is stored for a long period, this will negatively affect the traction characteristics of the internal combustion engine.

In addition, such operation causes small detonations, as well as the appearance of carbon deposits. All chainsaw users should not pay attention to low-octane mixtures, as they are characterized by low quality. In some cases, leaded fuel can be used. It can significantly extend the life of the device.

Two-stroke oil for chainsaws and scythes

Practice shows that an attempt to save on the quality of the fuel used leads to a significant reduction in the service life of the device itself. In addition, performance characteristics drop significantly.

User manual

It is necessary to have instructions included with the power tool. The manual answers all the saw user's questions, allowing him to independently assemble (disassemble) the tool, make repairs, adjust the carburetor, and learn how to operate the tool.

Additionally: Huskvarna chainsaw - models 135,137, 236 and 240

The instructions come standard and contain a lot of useful information.

In it you can find:

1. Basic information about the safe use of chainsaws and special protection.
2. Break-in instructions.
3. A section on assembling and starting a chainsaw, which is very important for those who have not previously had experience with such equipment.
4. Basic information about faults and their elimination.
5. Information on how to perform maintenance and cleaning.
6. A detailed description of the chain sharpening process and all the tools necessary for this.

It is difficult to evaluate the capabilities of a chainsaw without picking it up. For this reason, we invite you to read the review of Husqvarna 365, which was left by a professional feller.

Over several years of use, I have never encountered any startup problems. I have to work full time, and the saw performs well. There is even more power than necessary, but more is better than less. I tested the chainsaw according to the algorithm specified in the instructions and generally found a lot of interesting things in it, even for me.

Author of the review: Igor Tyumen.

How does a trimmer consume fuel?

A lawn mower is a very simple device. There's nothing that special about it. And that’s why many people buy it for their needs, since everyone can learn how to work with it, and quite quickly. Gasoline trimmers are eagerly purchased not only by amateur gardeners, but also by professional services. When purchasing such a product, the first thing to consider is the power of the device. This is right. However, there are other factors to consider when purchasing.

Anyone who has placed a bet on a gasoline trimmer should know that one of the most important characteristics for it is fuel consumption. And there is a simple explanation for this. First of all, the device must perform its functions for a long time so that there is no need to refuel for a long time. It's always convenient.

IMPORTANT! However, in this case, of course, the fuel tank will be large. As a result, its overall design becomes heavy

And this will make work difficult. Is it possible to find a wise solution in this situation? The problem can be solved by reducing fuel consumption.

Next, we will talk about what it can be, what the trimmer’s fuel consumption depends on, and we will also advise which gasoline is better to choose for work.

Rules for preparing the fuel mixture

If you wish, you can create the mixture in question with your own hands. It is recommended to do this before using the chainsaw directly. Storing the finished substance for more than 10 days leads to the formation of a chemical bond between the additives, which reduces the service life of the engine. Experts recommend that before storing the chainsaw for long-term storage, drain the fuel and use up the remaining fuel at idle speed.

Proportions should be selected in accordance with the recommendations of the manufacturer of the device itself. Depending on the model and its technical characteristics, the indicator can vary from 1:20 to 1:100 or more.

Chainsaw fuel mixture

When mixing active elements, it is strictly forbidden to use waste or oil that is not intended for operation of a two-stroke engine.

How is mixing done?

You also need to pay quite a lot of attention to the direct process of mixing the components used. As a rule, the fuel mixture is prepared in a volume that will be sufficient for 3-4 refills of the device used. The mixing procedure can only be carried out using measuring containers.

Among the features of the issue under consideration, the following points should be noted:

1. Some chainsaw manufacturers include measuring cups with marks for fuel and oil in the delivery package.
2. If you don’t have a special container, you can use a canister or dry bottle. It is convenient to dosage using a regular syringe without a needle.

After adding all the ingredients into one container, you can begin directly mixing the components. To do this, the container is closed with a lid and then shaken to obtain a homogeneous substance.

Working proportions of the fuel mixture

As previously noted, the proportions of oil and gasoline for a chainsaw can differ significantly, largely depending on the features of the design itself. An example of mixing is the proportions 40:1 and 50:1. This ratio ensures high-quality lubrication of the internal elements of the installed engine.

In some cases, the lubricant concentration can be adjusted upward, resulting in more effective lubrication. An example is the case when a new tool is being processed. In addition, the cooling efficiency of the structure can also be increased by adding a large amount of oil to the mixture. Experts recommend increasing the oil concentration by no more than 20% of the usual value.

As practice shows, in most cases the sawyer himself has to adjust the concentration of oil in the fuel depending on the characteristics of the work being carried out. This is due to the fact that as the structure wears out, serious damage can occur. With normal operating characteristics, sawing can be carried out over a long period.

Measuring containers

Various containers with marked markings can be used as a measuring container. Controlling the ratio is simplified when using a proprietary container, which is included in the package.

It is worth considering that measuring utensils are included in the factory kit even for budget models. However, a regular syringe with increased capacity also performs well.

Storage recommendations

It is not recommended to save time and mix the composition directly in the chainsaw tank. This is due to the fact that achieving the required result will be quite difficult. Storage recommendations are as follows:

1. The resulting mixture can be stored for no more than 2 weeks. As the ambient temperature increases, the shelf life decreases to 10 days.
2. In some cases, in order to save money, a previously prepared and expired mixture is added to a new one. However, its concentration should be no more than 10%.

Storing homemade mixture

To prolong the operation of the fuel system, it is recommended to filter the composition through a material represented by fibers.

Chainsaw fuel system design

To provide power to the chainsaw engine, a fuel system is installed. It may be structurally different, but in most cases it is represented by a combination of the following elements:

1. Fuel filter. Gasoline can contain various contaminants that can harm the design of the internal combustion engine. Filters can be characterized by varying degrees of filtration, which should be taken into account when choosing.
2. The carburetor is designed to mix air and fuel, resulting in a rich mixture. The operating parameters of the engine depend on the configuration features of this design.
3. The fuel pump is designed to supply the resulting mixture directly to the engine itself. It can be of various types.

The operating principle of the system responsible for supplying fuel to the chainsaw engine is quite simple. To store gasoline, the device has a tank from which fuel enters the carburetor. The simplest designs do not include a pump, which is worth considering. The filter, responsible for cleaning the fuel mixture, is installed at one end of the hose, which is lowered into a container with gasoline.

With a constant flow of liquid, a negative pressure is created in the tank, due to which it is filled with atmospheric air. This situation leads to the carburetor not receiving the required amount of fluid. To avoid this problem, a breather is installed on the lid. That is why when operating a chainsaw, care should be taken to ensure that the breather does not become dirty.

Very often, a primer is installed during the manufacture of a structure. This makes starting the engine much easier. The design features of such an element determine that fuel enters the carburetor in advance.

Features Shtil 250 and 250 C-BE

To improve the performance of the Shtil 250, the designers installed several modern developments on the chainsaw, which best affect the comfort and quality of the chainsaw. The first thing we will talk about is the compensator.

Compensator

A special device installed in the carburetor cover and connected to the air filter housing by a separate small channel. The essence of the compensator is that it allows air to enter the carburetor in addition to the fuel filter. This is necessary in those moments when the air filter is extremely dirty and does not allow the amount of air required by the engine to pass through.

On chainsaws that are not equipped with a compensator, a dirty fuel filter can cause an increase in fuel consumption and an over-richness of the fuel mixture. As a result, everything can end with carbon deposits under the piston rings and scuffing of the CPG. Accordingly, the saw will require expensive repairs, and the compensator can protect against all this.

You cannot operate a chainsaw for a long time with a dirty filter, even if it has a compensator. We recommend cleaning the air filter after every working day.

Carburetor heating

This function is most useful in winter, as it prevents carburetor icing. The operator can turn the option on and off as needed. To change the mode, you need to move the valve, which redirects warm air flows to the carburetor or vice versa.

In the summer, you need to make sure that the damper is open, because otherwise the engine will cool worse and it can overheat.

Chain brake

One of the safety mechanisms when working with a chainsaw is a manual inertial chain brake. If for some reason the chainsaw bar makes a sharp rebound, the brake will engage and the chain will instantly stop spinning, thereby reducing the risk of serious injury. For the chain brake to operate correctly, the operator must comply with several conditions:

1. Hold your hands as instructed, i.e. left hand on the front handle, right hand on the back handle.
2. Clean the mechanism in a timely manner, since it is located in the side cover, which receives a huge amount of sawdust.

Vibration reduction system

The chainsaw engine vibrates strongly during operation. Vibration can cause discomfort and reduce operator work time due to fatigue. To solve the problem, German engineers equipped the Shtil 250 with an anti-vibration system consisting of effective shock absorbers. Thus, Shtil 250 can be used for work even by those who have chronic diseases of the hands.

Combined control

Another system that adds convenience and is designed to facilitate the operation of the Shtil 250 is a combined control lever. Thanks to which, turning the ignition on and off is done with the thumb of the left hand. The suction mode is also activated in the same way. You never need to look for the switch; it is always at hand, which is especially convenient in case of an emergency.

Ematic

This is an officially patented system by Stihl, which is designed to reduce friction and increase the service life of the saw set. The system includes not only the part that is installed on the chainsaw, this is the oil pump and transport lines, but also the bar and chain of the chainsaw.

Features of design and application

In working on the project, the designers used diverse experience in operating previous models and advanced engineering and design solutions even for our time. The performance characteristics of the chainsaw are aimed at use in the private sector and small-scale construction.

• The Shtil MS 180 saw successfully copes with sawing fuel wood, trimming large branches and forming the crowns of fruit and ornamental trees.
• Compact dimensions determine its suitability for working in hard-to-reach places of erected log and timber structures.
• Owners of this tool respect it for its stable performance in various types of simple and complex sawing work, a high degree of operational reliability and a long service life.
• Functional malfunctions of a chainsaw in most cases are the result of unskilled care, excessive loads, unjustified savings on the quality and cost of fuel, lubricants and consumables.

According to information received from service departments, new Shtil chainsaws are received for warranty repair in single copies. The main part of the repair range is models produced after the 2000s, the performance and technical characteristics of which are restored by 96-98% with moderate costs of material resources.

• How to Start a Stihl 180 Chainsaw
• How to Cut a Countertop at Home
• How to Clean the Carburetor of a Stihl 180 Chainsaw
• Which Circular Saw is Best for the Home
• Adjusting the Carburetor of a Stihl 250 Chainsaw with Your Own Hands

Chainsaw Stihl MS 180: properties, photos and reviews

If you decide to purchase a chainsaw, you must decide for yourself what purpose you will use this tool for. If you subject it to the highest loads, then a model that is higher in class than household representatives of similar equipment will come in handy. Nowadays you can find semi-professional saws on sale, which are farm-grade units.

With their help, you can do any type of work, but such saws are not able to withstand professional loads. If you decide that you need a professional-class model, you must find out whether all its functions will be needed in your work. Otherwise, you risk overpaying and becoming the owner of an irrational acquisition. But you should not save when you plan to operate the tool under the highest loads, because in this case, an unprofessional model will quickly fail, and all components will become unusable.

Recommendations for selection

Quite often, such devices are used as tools with which to trim knots in logging. Ms 361 fuel consumption of the Shtil 361 chainsaw. Fuel consumption of the Shtil 361 chainsaw. As for professional saws, they can be designed to work up to 16 hours a day. Their main feature is the ability to operate for 8 hours without interruption. Professional chainsaws are distinguished by the highest power, this parameter can be 2.5 kW. As for their resource, it is equal to the limit from 1300 to 2000 engine hours. If we consider household models, the resource will be 3 times lower.

Modern manufacturers also offer special-purpose saws for sale. They have an unusual design that allows you to do work inside and outside the tree crown. Such models are characterized by a good center of mass location and low weight. They are also popular because they are easy to maintain and have a highly effective anti-vibration system.

If you still can’t decide which chainsaw model to choose, you can turn your attention to the Stihl MS 180, the properties of which will be discussed below. In order to make the right choice, you should also study reviews. Their consumers quite often talk about the operational features of the equipment.

Description of the Shtil MS 180 chainsaw

You can purchase the above-mentioned model for 13,600 rubles. It can be used during small construction or in a garden plot. The saw has proven itself to be excellent when pruning fruit trees and preparing firewood.

The model is easy to maintain and operate. Stihl chainsaws, reduced fuel consumption The stihl ms 361 chainsaw has optimal. It has an effective anti-vibration system, which ensures comfortable and fatigue-free work. Stihl MS 180 has a lubrication system that significantly reduces oil consumption. The base of the handle is quite large, which means safety, which will come in handy if the chain breaks. An additional chain is included in the kit.

Feedback on operational features

Consumers, in their words, quite often choose the chainsaw described in the article for the reason that it has an abundance of advantages.

Among them we should highlight:

• comfortable control;
• the presence of a compensator in the design;
• anti-vibration system;
• reduced oil consumption;
• ensuring safe work.

As for comfortable control, it is expressed in hot and cool starts. Operation and shutdown of the equipment is done with one lever. Original professional and household chainsaws Stihl, fuel consumption stihl ms 361. tire. Chainsaw stihl ms 180. design and characteristics. Stihl MS 180 has a compensator in the carburetor. This element is capable of maintaining fuel consumption and constant power. Consumers especially highlight the anti-vibration system. Repairing a Stihl chainsaw is not difficult, stihl 361. It has reduced fuel consumption. It protects a person’s hands from poor circulation and hand diseases.

Oil consumption is also important; it is halved. The oil pump, guide bar and saw chain form one system that uses oil quite sparingly. Any drop goes directly to where lubrication is required. By choosing the Stihl MS 180, you can be sure that working with equipment will be safe.

STIHL MS 180 HOW TO ADJUST THE CARBURETOR How to adjust carburetor STIHL chainsaw MS 180

How to adjust the carburetor Stihl ms 180

what are the min and max speeds? Also a similar video about adjustment on mine.

My Stihl MS 180 chainsaw, operation, reviews, pros.

My Stihl MS180 chainsaw

, operation, reviews, advantages. Chainsaw video: How to start a chainsaw. Preparation.

In just a few seconds, a safety mechanism is activated that stops the saw chain if the front stop is pressed. Kickback may also occur during operation, but the chain brake will operate automatically. Consumers consider additional advantages to be low weight, the highest quality of chain production, a fairly impressive length of the bar, and a well-thought-out design that allows for the possibility of installing devices.

Technical characteristics of the chainsaw

Stihl MS 180, reviews of which you could read above, according to consumers, has quite outstanding technical properties. Among them, a 40-centimeter tire should be highlighted, as well as an impressive oil tank volume of 0.145 liters. This tool belongs to the household class. It has 55 links, the width of its groove is 1.3 mm. The unit weighs 3.9 kg, which does not put an impressive load on the hands. The fuel tank capacity in the design is 0.25 liters. The power of the equipment is 1.5 kW, which is 2 liters. With. The chain pitch is 3/8 inch. The tire length is 16 inches. The kit includes an NGK BPMR 7A spark plug.

Chainsaws, gasoline, oil and its consumption

L + + + Note: When determining these standards, it is assumed that the mechanism operates 50 - 60% of the working time. CONSUMPTION RATES OF LUBRICANTS FOR GASOLINE SAWS (BASED ON THE AMOUNT OF PETROL GASOLINE USED) TTT ¬ ¦Saw brand¦For¦For lubrication of the saw¦Consistency¦ ¦¦preparation of ¦apparatus¦lubrication¦ ¦¦working mixture ¦¦¦ + + + + + ¦»Husqvarna » <1¦2%¦50%¦0.2%¦ + + + + + ¦"Taiga"¦5%¦35%¦0.2%¦ + + + + + ¦"Friendship"¦5%¦2 %¦0.2%¦ + + + + + ¦”Ural-5″¦5%¦16%¦0.2%¦ + + + + + ¦”Secor-3″¦5%¦-¦0.2 %¦ ¦("Secor-44")¦¦¦¦ L + + + <1 When using special Husqvarna oil. GASOLINE CONSUMPTION RATES in LITERS PER VEHICLE HOUR IN CUTTING CUTTING AND CLEARING TT ¬ ¦Saw brand¦Engine power,¦Consumption rate top¦ ¦¦hp/kW¦liv, l/motor.

How much gasoline does a chainsaw consume?

Another quite important indicator is how much fuel the chainsaw consumes during operation. The container for its storage can have a volume from 0.3 to 1 liter. The consumption rate depends on the following points:

1. Motor power. This indicator can vary over a fairly wide range. Household versions are characterized by less power, however, the volume of the tank is also reduced. Therefore, you need to prepare the required amount of fuel in advance, taking into account the consumption indicator indicated by the manufacturer.
2. Work intensity. When sawing, the idle and working cycles can change quite often.
3. Emerging load. When processing wood, for example, which is frozen, the load increases significantly. This is why frequent refueling is necessary. However, there is a certain limitation on the fuel indicator.
4. It is worth considering that when the structure wears out, fuel consumption increases significantly. That is why after a year or two of operation, refueling has to be done much more often.

When professionally providing services related to sawing building materials, models with increased power are often used. They can operate for a long period, which causes frequent consumption of fuel. In everyday life, models are used that are characterized by a lower performance indicator. With a power of 5-6 kW, the consumption rate can be 3 liters per hour. If the power is less, then the value drops to 0.6-0.8 liters per hour.

In conclusion, we note that new models are extremely intolerant of poor fuel mixtures.

That is why when buying an expensive chainsaw from a well-known manufacturer, you need to pay attention to what kind of fuel can be used when refueling

Saw set

Chainsaws of various modifications are equipped with branded tires 14 and 16 inches long, respectively, with STIHL Oilomatic 3/8 inch saw chains. Oil for cooling and complete lubrication of the cutting mechanism is supplied from a 150 ml tank to the cut by a non-regulated oil pump.

The list of mandatory equipment includes a saw chain tensioning device and a chain locking system that is triggered in the event of a kickback or other traumatic event. The chain stops in a minimally short time from a light blow to the back of the protective barrier.

Today, Shtilevsky sets are at the level of the best world and European samples in terms of quality and durability.

Chainsaw consumes a lot of gasoline

A gasoline lawn mower is not uncommon nowadays, and you can find it in almost every household plot. There is nothing special about its design, and even a beginner can use it. However, there are points that you should pay special attention to. For example, do you know what the rate of gasoline consumption for a lawn mower should be, and what values ​​does this figure depend on? If not, this article will serve as a very useful source of information for you.

So, first, let's find out what determines the gas mileage of a lawn mower. Several points are important here:

Power. Features of the engine design (two- or four-stroke). Cutting width. Area of ​​the site and its relief. Let's talk in more detail about each of the factors.

Do you want mileage of your lawn mower to be as low as possible? Take a closer look at units with a 4-stroke engine, such as the Huter GLM-5.0. Such a model is more expensive than with a 2-stroke engine, but the economical fuel consumption will significantly cover all the costs of your budget.

When purchasing a lawn mower, keep in mind that most of them are designed for smooth surfaces. Therefore, if there are uneven areas on your site, make sure that your new garden assistant has large wheels that would provide it with good maneuverability. Thus, the device will not have to work hard and waste a lot of fuel.

It should be noted that for areas with difficult terrain, it is better to purchase a front-wheel drive lawn mower, which is endowed with the best maneuverability.

Both indicators are closely related. The higher the power, the wider the cutting width. Please make sure that in the model you are interested in, these concepts are correctly balanced. Accordingly, the larger the mowing width, the less time you will spend mowing the lawn, and the gas consumption for the lawn mower in this case will not exceed the norm.

In addition, all cutting parts will not be subjected to heavy loads, which will significantly increase their service life. Let us remind you that all repairs and sharpening of cutting parts must be carried out only by a specialist in the service department.

Gasoline consumption rate for a lawn mower

Let us consider, as an example, several indicators for well-known models. For a lawn mower like the Al-ko Silver 520BR, equipped with a Briggs Stratton engine (3.7), the norm is 1 l/machine hour. For Honda HRX 426C SDE with a powerful Honda GCV-160 (4.1) engine – 0.8 tank l/machine-hour.

READ Adjusting the carburetor of the Husqvarna 137 chainsaw

To ensure that your lawn mower lasts a long time and is economical in fuel consumption, we suggest that you familiarize yourself with several rules for storing this unit.

A gasoline engine is a complex structure that requires special attention and regular maintenance. Therefore, before starting work, you must familiarize yourself with the operating rules of the machine and follow the manufacturer’s recommendations.

Keep the inside surface of the case clean. Grass juice is very caustic, so after work, don’t be lazy and clean your technological assistant. When purchasing a mower, take care of where it is stored. Consider the dimensions of the unit and look for a model with a folding handle, which will be ideally located in storage.

High consumption of gasoline, where to start so that it does not consume gasoline?

Modifications

Like its older brother, Shtil MS 180, the MS 170 chainsaw can have an improved modification. For example, the STIHL ElastoStart system can be installed on it, which reduces the engine compression resistance due to an additional starter spring installed.

Another useful option of the MS 170 chainsaw is the quick chain tension system. You can tighten the chain with it even without using a special key, which is very convenient. As a rule, keys are often lost. Photo of the system below.

The side chain tensioner is also designed to facilitate the operation of the tool, since in the standard version it is not very convenient to adjust the chain tension of this chainsaw. The adjusting screw is located behind the tire on the crankcase, and when the chain is tensioned, the tire gets in the way. In some cases, when the chain is accidentally touched, it can cause hand injury.

Basic configuration, equipment, assembly and production

Assembly and production of the original Shtil ms 180 chainsaw - Germany. Often in construction markets or in small stores you can find the supposedly stihl ms 180 model, but at a very low price. This price is a sign of a fake. The original Shtil 180-ms chainsaw cannot be cheap. Most often, Chinese or Polish copies of chainsaws, which are assembled in Chinese factories, end up on the market.

The cost of a branded tool in retail sales, according to the manufacturer’s recommendation, is from 4,659 UAH (from 11,394 rubles).

The original stihl MS 180 tool is always equipped with documents such as a product passport, operating instructions, and a warranty card with a warranty period of at least 12 months. The chainsaw's passport can show the authenticity of the device - on the manufacturer's official website, using the serial number indicated in the passport, you can find the parameters and characteristics of the chainsaw model.

Basic equipment of the Shtil ms 180 saw:

• body part of the chainsaw with engine and fuel tank;
• saw part, represented by a chain, bar, sprocket;
• user manual;
• saw chain brake;
• handle holder.

A detailed description of the components of the saw design can be found in the product instructions.

Additionally, the owner can purchase the following components for the stihl ms 180 model (these items are not included in the package):

• holder with a round file (allows you to sharpen a chain link with your own hands if necessary);
• filing template;
• control template;
• Shtil lubricant for chainsaw;
• fuel filling system that prevents gasoline from spilling when filling;
• Oil filling system - allows you to add oil without spilling.

Requirements for the fuel used

The first question that arises when using a chainsaw is choosing the most suitable fuel. Experts recommend carefully choosing gasoline for a chainsaw, since if the substance is of poor quality, the structure of the internal combustion engine may be damaged. Unleaded petrol is often chosen as it is highly compliant with established standards. The exact brand is indicated by the chainsaw manufacturer in the operating instructions. That is why problems with choosing the most suitable composition should not arise.

The use of fuel that does not meet the basic parameters leads to the following problems:

1. The power rating may be significantly reduced.
2. Power can jump over a fairly large range.
3. The engine will begin to overheat when the recommended octane number is exceeded. Too high a temperature can cause the material's ductility to increase and the structure to fail under high loads.

In addition, it is strictly forbidden to mix the gasoline mixture with other dubious compounds. Foreign impurities can cause damage to the structure of the chainsaw engine. When choosing fuel, it is worth considering that in addition to the octane number, the main parameters are influenced by many other parameters that need to be considered.

It is also not recommended to purchase large quantities of fuel for storage. Over a long period, the basic properties may change. In winter conditions, problems with starting the engine may occur.

Chainsaw Shtil 250 - malfunctions and repairs

Most often, the Stihl MS 250 chainsaw fails due to the use of low-quality fuel and motor oil, as well as due to wear and tear of the main components of its device. To repair a model with your own hands, you need to find the exact cause of the breakdown and replace worn parts with high-quality parts.

The saw will not start - causes and troubleshooting

If the Stihl chain saw does not start, then the first thing that needs to be carefully inspected is the ignition system of the garden tool, namely the gap between the standard flywheel and the coil. For stable operation of the Stihl model, the distance between these elements must be 0.2 mm. If this setting has been violated, then it will need to be adjusted.

To set the gap between the built-in flywheel and coil, you need to remove the left side cover and clean the parts underneath.

After this you will need:

1. Unscrew the 2 screws located above the flywheel counterclockwise;
2. Install a special template between the ignition coil and the flywheel;
3. Start turning the screws in the direction of the clock until the flywheel comes close to the template.

After adjusting the gap, you need to install the protective cover of the Stihl saw body and start the engine. Sometimes the engine does not start the first time the starter rope is pulled. In this case, you need to continue trying until the internal combustion engine starts.

What to do if the chainsaw spark plug floods?

The cause of this malfunction is the use of a fuel mixture prepared in the wrong proportion. As a result, excess engine oil leaks onto the spark plug and, over time, accumulates on it in the form of carbon deposits.

To solve the problem, you need to unscrew the spark plug and clean the space under it. Next, you will need to remove all accumulated carbon deposits from its surface and rinse the part with clean gasoline. After complete drying, the candle must be screwed into place and continue operating the saw.

Chainsaw Husqvarna 240E;

Chainsaw Husqvarna 395XP;

Chainsaw Husqvarna 450E;

Chainsaw Oleo-Mac 937;

Chainsaw Stihl MS211, MS211C;

Chainsaw Stihl MS880;

Advantages of the Stihl MS 361 petrol saw

Let’s evaluate the advantages of the original MC 361 saw from the German brand “Shtil”:

• a light weight;
• mobility;
• the build quality is excellent;
• environmental friendliness, clean exhaust;
• independence from power source;
• reliability and durability;
• unpretentiousness and simplicity in operation and maintenance;
• versatility, ability to use with attachments;
• high power and torque;
• excellent maintainability, availability of spare parts;
• increased security;
• the presence of a heating system for the carburetor and handles;
• anti-vibration protection;
• the ability to connect a Stihl tire of any size;
• economical supply of chain lubrication in automatic mode;
• original Shtilev chains Oilomatic or Picco are suitable;
• easy start;
• Stihl chainsaw control is single lever;
• ease of access to air intakes and filter;
• reusable air filter.
• There are also disadvantages - the high price of the tool itself and spare parts.