Motoblocks from the manufacturer Carver are outstanding representatives of Chinese technology; they are distinguished by high quality and durability. Such units are easy to maintain and operate, so you can select a part for them or carry out repairs without any problems.
In this article we will present a list of the most popular models of this brand, consider their positive aspects and disadvantages.
This type of walk-behind tractor has several types of models
see also
Comments 14
Guys, how do you define, CHINA, JAPANESE, AMERICAN... They all look the same, the difference is in the stickers... My snow thrower (China) has been working for 5 years without any complaints, and the motorized cultivator worked for a season on the ground in the summer, on snow and ice in the winter, both they work great... and are not expensive...
Mainly it's the price.
A copy of my Khoper engine, complete nonsense, the vibration at idle is transmitted right to the cart, this is the only negative, I installed it on my walk-behind tractor while I was repairing BRIGSS & STRATON, the repair cost 7500 rubles more than a new engine (5000 rubles)
Yes, it is similar to the Chinese, but there is one big problem, namely in Ukraine, for Chinese engines (as strange as it sounds), there are all sorts of fakes from the CIS countries and there are plenty of all sorts of basement workshops, I won’t specify specifically, but there are big manufacturers and in Ukraine and Russia that operate under a license from China, at the same time the price is many times higher than the original China, in my area, more than one hectare of Chinese motors have been tested, from companies such as Forte and Damask Veima, the last two are purely Chinese brands that are produced in Veima factory and, as expected, it is tested, so to speak, a factory product, although there are no complaints about other brands. They themselves have been using the Chinese motor on the MB1 for ten years, from transporting manure to mowing, in short, it performs all operations including a grain crusher, in short, so to speak, a pioneer in 2008, the word Chinese caused ridicule if you take a normal pure Chinese. Regarding the above, it is said that there are no sweaty or high-torque gasoline engines, all engines from 5 hp to 7.5 hp, have a maximum speed of 3600, they pull everything from the bottom, the crankshaft stroke and the crankshaft itself are the same everywhere, 5.5 hp 165 cc, 6, 5,190 cc, 7 hp, 200 cc, 7.5, 212 cc, because of the cylinder diameter, horses and torque increase; the brand of the company does not affect how the engine behaves.
I installed this one instead of the broken one, I had no desire to go through it, it’s been working for 5 years without any complaints
The cost of such a motor is not even the cost of its assembly, it is the quality of the metals from which it is assembled. The cheaper the metals and components, the cheaper the motor itself. If you need a “motor” for several seasons of work, or you rarely use a walk-behind tractor, then buy such a disposable motor.
But if you regularly and often work on a walk-behind tractor, then I advise you to buy either a Brigs & Stratton officially assembled in China, or a Honda engine assembled in Taiwan. By the way, there is a difference in the use of Honda and Briggs engines! Honda engines are high-quality and high-speed engines, they are good for mowing grass, as well as for quickly transporting not very heavy loads. But if you need to regularly plow the garden or cut the beds, then it is better to use low-speed, and more powerful Briggs! Briggs & Stratton also copes well with the transportation of wet and heavy manure, and with the transportation of heavy loads. I have verified all this from my own experience, so I am writing. A cultivator with a 5.5 liter Honda engine was also working in the garden. With. And now a walk-behind tractor with a Briggs&Stratton 6.5 hp engine is working in the garden.
Complete nonsense! A cascade walk-behind tractor, installed one of the cheap 6-5 hp motors. Working for the 5th season on 2 hectares to the fullest! This is milling and hilling.
The cost of such a motor is not even the cost of its assembly, it is the quality of the metals from which it is assembled. The cheaper the metals and components, the cheaper the motor itself. If you need a “motor” for several seasons of work, or you rarely use a walk-behind tractor, then buy such a disposable motor.
But if you regularly and often work on a walk-behind tractor, then I advise you to buy either a Brigs & Stratton officially assembled in China, or a Honda engine assembled in Taiwan. By the way, there is a difference in the use of Honda and Briggs engines! Honda engines are high-quality and high-speed engines, they are good for mowing grass, as well as for quickly transporting not very heavy loads. But if you need to regularly plow the garden or cut the beds, then it is better to use low-speed, and more powerful Briggs! Briggs & Stratton also copes well with the transportation of wet and heavy manure, and with the transportation of heavy loads. I have verified all this from my own experience, so I am writing. A cultivator with a 5.5 liter Honda engine was also working in the garden. With. And now a walk-behind tractor with a Briggs&Stratton 6.5 hp engine is working in the garden.
This is all lyrics, now there are quite a lot of good engines that are assembled in the same factories as famous brands, the Chinese don’t care what to copy or what to call them. Actually, Carver is a registered trademark or brand of a Perm company that has been on the market for several years and whose products I am familiar with firsthand. When the first Chinese Lifan engines went on sale, there was a lot of negativity about them, saying that China would fall apart in the first season, but whoever installed them on MB-1 walk-behind tractors was among the first, no one complained, and the engines are still alive.
Engine
The Carver MT 650 model uses a Weima 168FB-2 4-stroke air-cooled gasoline engine. This unit is one of the latest developments of a well-known Chinese company. Among the features of the engine, it is worth highlighting the presence of a mechanical speed controller and an emergency stop when the oil level is low. The unit has an overhead valve arrangement and high performance. The air filter guarantees maximum protection in all conditions. In terms of design and characteristics, the Weima 168FB-2 is an almost complete copy of the Japanese Honda GX200 engine.
Engine characteristics:
- working volume – 196 cc;
- rated power - 6.5 hp;
- maximum torque – 13.2 Nm;
- number of cylinders – 1;
- start type – manual.
About company
The Carver brand belongs to Perm and became famous in 2009, when it launched a range of gardening equipment on the market.
The products have proven themselves well in the agricultural machinery market.
The Perm assembly of these units is distinguished by good quality, reasonable price, simplicity of design and interchangeability of most components.
The easy assembly of walk-behind tractors implies hassle-free service, ease of repair and debugging, even without using professional tools and without resorting to the services of specialized workshops.
The engines installed on walk-behind tractors are analogues of Honda GX series engines, therefore they work well in tandem with a gearbox.
Model range of walk-behind tractors
The Carver T-400 motor-cultivator is a lightweight small unit weighing 29 kg, equipped with a four-stroke 4 hp engine.
It does not have a gearbox; torque is transmitted through a belt to a worm gearbox.
The clutch is operated by adjusting the degree of belt tension.
The crankshaft is located vertically, which simplifies the design of the walk-behind tractor and reduces the cost of its production. Ideal for cultivation, plowing and other work in small areas.
The motor-cultivator is designed for cultivating the surface layer of soil (soil) on small plots of land using milling cutters. Not for use with cart
Specifications
| Engine model | 168FB-2 (4-stroke petrol), OHV |
| Engine displacement, (cm. cubic meters) | 196 |
| Maximum power, hp, (kW)/rpm | 4,0 (3,0)/3600 |
| Working width | 380 mm` |
| Tillage depth | 220 mm |
| Speeds | 1 forward, neutral |
| Clutch | Belt |
| Weight | 28 kg |
MT-650M
The Carver MT-650 walk-behind tractor has compact dimensions and a simple design, and is also effective in operation. Equipped with a 4-stroke engine with an operating power of 6.5 hp. and a volume of 196 cm3, using gasoline as fuel.
Can be used for mowing grass, as a snow blower, and also for processing soil of various densities.
It has 2 forward gears and a reverse, which increases its maneuverability.
The air oil filter copes well with dusty air.
The model is equipped with wheels size 4.00-8, which provide improved maneuverability. The gear reducer easily transmits torque from the motor to the wheels.
The unit weighs 105 kg, can process a row 80-120 cm wide, and can also go deep into the soil up to 35 cm.
The walk-behind tractor is designed for cultivating soil, mowing grass, removing snow (with the help of an additional attachment-snow blower) in small and medium-sized areas, as well as performing a transport function.
Specifications
| Engine model | ZONGSHEN XP140A (4-stroke petrol), OHV |
| Engine displacement, (cm. cubic meters) | 196 |
| Power at 3600 rpm | 4.8 kW / 6.5 hp |
| Fuel tank volume, l | 4,8 |
| Working width | 800-1200 mm` |
| Tillage depth | 100-350 mm |
| Speeds | 2 forward, neutral, 1 reverse |
| Clutch | Belt |
| Weight | 97 kg |
MTL-650
The Carver MTL-650 walk-behind tractor weighs 91 kg, which allows it to be used for cultivating soil without weights.
Equipped with a 4-stroke gasoline engine producing 6.5 hp, with a working volume of 196 cm3.
Thanks to the presence of tillers, the unit can plow the ground to a depth of up to 20 cm, be used as a snow blower, or transport loads using a trailer.
The device has 2 forward gears and one reverse gear, which significantly increases maneuverability.
Wheels on tubeless tires measuring 4.00-8 do not get stuck on wet ground, and a capacious 4.8-liter gas tank allows you to work for about 5 hours without refueling.
The processing width of a row can vary from 50 to 100 cm. The unit is equipped with an air-oil filter, which increases the service life of the motor, and also has a transport wheel for ease of movement.
Specifications
| Engine model | 168FB-2 (4-stroke petrol), OHV |
| Engine displacement, (cm. cubic meters) | 196 |
| Maximum power, hp, (kW)/rpm | 4.8 kW / 6.5 hp |
| Fuel tank volume, l | 4,8 |
| Working width | 500-1000 mm` |
| Tillage depth | 150-250 mm |
| Speeds | 2 forward, neutral, 1 reverse |
| Clutch | Belt |
| Weight | 83 kg |
Model Carver MT 650
Carver MT 650 is a compact walk-behind tractor, easy to use and maintain. This model is collapsible, which makes transportation easier. The equipment is intended for removing debris and snow (using a special attachment), mowing grass, cutting boletus, cultivating soil and performing other tasks on areas of up to 1 hectare. Also, the Carver MT 650 can replace transport, transporting loads weighing up to 300 kg.
The basis of the walk-behind tractor is a strong frame on which the main elements are mounted. The equipment is driven by a 6.5 hp gasoline unit. It is enough to perform basic operations on the site. All Carver brand walk-behind tractors are equipped with a 3-speed transmission, allowing optimal use of the device’s capabilities. 2 forward, neutral and reverse speeds make the vehicle very maneuverable. The gear-chain gearbox in a cast iron housing used in this walk-behind tractor is both simple and reliable. The type of clutch used is belt.
Even an inexperienced operator will like the Carver MT 650. The folding control handle with adjustments in the vertical and horizontal directions simplifies storage and transportation, and also promotes comfortable work. The owner can easily adjust the device to his height and characteristics. The coulter allows you to select a specific cultivation depth.
The basic configuration of the Carver MT 650 walk-behind tractor includes large pneumatic wheels that increase the level of maneuverability. This is facilitated by the wide wheelbase, which also makes it more stable. Wide fenders protect the engine and operator from dirt, debris and rocks. The model is ideal for use in Russian conditions. The manufacturer recommends the Carver MT 650 equipment for regions with temperatures from +1 to +40 degrees.
The walk-behind tractor is supplied with pneumatic tires, cutters, fasteners, opener, clamps, protection, a set of keys, a protective cover and instructions. The model can work with a wide range of additional equipment that expands its functionality. The Carver MT 650 walk-behind tractor is suitable for devices from the Tselina and Cascade models. The following equipment is used with this technique:
- lugs;
- plow;
- hiller;
- rotary mowers;
- cart;
- segment mowers;
- potato planter;
- potato digger;
- special cutters;
- water pump.
Carver MT 650 is a fairly unpretentious walk-behind tractor. However, it is recommended to run it in immediately after purchase. This way the equipment will last much longer. Running in is necessary so that the parts of the walk-behind tractor are broken in. It is performed as follows:
- Checking threaded connections.
- Checking and filling oil and fuel.
- First start and warm-up of the engine (up to 10 minutes).
- Operation at medium power (up to 10 hours). During this period, he recommends working with the walk-behind tractor in various gears and with various equipment. In this case, the device must not be overloaded (no more than 2/3 of the maximum power).
- Change of oil.
Attachments
Due to the fact that Carver models are equipped with a power take-off shaft, it is possible to use various attachments, which not only expand the capabilities of the walk-behind tractor, but also simplify many works on the farm.
Below is a list of additional equipment that is used with Carver walk-behind tractors:
- A rotary mower is designed for cutting grass or trimming a lawn. As a result of the work, all the grass is folded into rows, which facilitates its further raking.
- Grousers are used when performing complex work such as plowing, hilling or harrowing. Moving the walk-behind tractor on loose soil is greatly simplified.
- A plow with a hitch is capable of not only digging up the ground, but also making even furrows, which can later be used for planting.
- Cultivators "Crow's feet" are non-separable equipment with a specific design. Used for weeding a large number of weeds.
- The trolley is used to transport various goods. A special feature of the model is the ability to fold down the side to facilitate loading and unloading.
- A potato digger is the most necessary equipment, which is purchased additionally, as it greatly facilitates the harvesting of root crops.
- The two-row hiller is used to create furrows when sowing various crops.
- The segment mower is designed for cutting grass on the lawn. As it moves, the landscape of the soil is repeated, which makes it possible to use it in areas with uneven surfaces.
Features of use
An important factor for extending the life of cultivators is timely maintenance.
The instructions for use provide a table according to which maintenance is carried out, including such operations as changing the oil, replacing the air filter, spark plugs, adjusting the gaps between the valve stem and the pusher, tensioning belts, etc.
When using the walk-behind tractor in dusty conditions, it is recommended to carry out more frequent maintenance and inspections.
Changing the engine oil is carried out while the engine is still warm, because otherwise not all the lubricant will leak out. A container is placed under the drain neck, the plug is turned out and the oil is drained by gravity.
Fill in a new lubricant only according to the manufacturer's recommendations: SAE 80W-90, SAE 85W-90 or similar.
It is advisable to dispose of used oil properly, namely by handing it over to a waste disposal service.
Preparation for long-term storage
If you plan not to use the walk-behind tractor for a long time, adhere to the following storage rules:
- The fuel needs to be drained.
- Clean the machine from dirt and adhering grass.
- Remove the spark plug and add 15 ml of engine oil, then install the spark plug in place.
- Pull the starter until resistance is felt. Continue pulling until the mark on the starter pulley aligns with the hole on the housing.
- Wipe all unpainted surfaces with a cloth lightly moistened with oil. This will prevent the occurrence of corrosion.
- Cover the walk-behind tractor from dust.
- Store in a dry and ventilated area.
Trouble-shooting
| Engine doesn't work | The ignition is not turned on; There is no fuel or oil, they may be out of date; No spark; Dirty air filter; |
| The engine stalls | The air damper or fuel valve is closed; The filter is clogged; Faulty spark plug. |
| Noise from gearbox | Bearing wear, which is better replaced with a new one; Deformation of sprocket teeth; Little lubricant or poor quality |
| V-belt slipping | Oil on belt or pulley; Weak belt tension; The belt is worn or deformed. |
For more information, please follow the link—>
Run-in
The cycle of procedures that are necessary for the successful operation of a walk-behind tractor is called running-in. It is usually carried out after purchase, while the walk-behind tractor is new, or after long-term storage of the unit.
The manufacturer strongly recommends running-in according to all the rules without neglecting it, since at this time the engine parts and large components of the unit are being ground in.
Features of operation, maintenance
Carver walk-behind tractors are distinguished by high-quality assembly and a reliable, well-thought-out design. According to reviews from owners, walk-behind tractor engines are characterized by good torque and long service life, but are demanding on fuel quality. Carver walk-behind tractors are equipped with tires of our own production; the main components are made in China and combine decent quality at an affordable price.
The manufacturer recommends using SAE 10W-30 engine oil and SAE 80W-90, SAE 85W-90 transmission oil. The first engine oil change is performed during break-in after 5 hours, then after 20 hours, then after 100 hours of operation. The oil in the gearbox is filled for the entire service life of the transmission; it is not changed, but only the level is monitored.
Owner reviews
Owners of Carver walk-behind tractors note a weak protective structure and inconvenient placement of spark plugs. But in general, we can conclude that there are more positive emotions during exploitation than dissatisfaction.
Artem : “I really like the Carver MT-650 walk-behind tractor, as it allows you to quickly plow 50 acres of virgin land. However, the lump protection is very weak and quickly cracked. Difficult to shift gears, they don’t immediately go into place. If you tilt the walk-behind tractor, oil flows into the cylinders, which can lead to problems when starting. Among the advantages I would like to include the engine, which, despite all the difficulties, works properly.”
We invite you to leave a review if you are the owner of CARVER walk-behind tractors. The information you provide can help our readers choose a cultivator model.
Carver MT 900 is a heavy-duty walk-behind tractor, a very compact and reliable device that can cope with any agricultural tasks. The machine is universal and technologically advanced, and has mobile capabilities in terms of convenience in cramped areas. Also, together with the Carver MT 900, it is possible to transport small loads and many other types of work. The walk-behind tractor in question has proven itself well in farming, gardening, and is also in steady demand among summer residents and public utilities. The technical capabilities are vast and varied, and in terms of functionality, the Carver MT 900 is one of the best in its class.
Video
The Carver MT 650 walk-behind tractor is a Russian product that appeared in 1997. In just a few years, it has grown from a small organization into one of the largest domestic manufacturers of gardening equipment.
The Carver brand was officially registered in 2009. The production of garden equipment began under this brand. Annual participation in exhibitions, thoughtful marketing moves and high quality have made Carver walk-behind tractors very popular among Russians.
The brand's product line consists of several models with a high service life. Carver walk-behind tractors are equipped with tires of our own production. The equipment contains exclusively proven components (manufactured in China). This makes Carver products both reliable and inexpensive, which is their undeniable advantage.
General information and design features
Carver MT-900 is quite compact, and this allows it to work even in hard-to-reach places - due not only to its dimensions, but also thanks to special attachments. The universal flexible design of the walk-behind tractor supports a large number of attachments. Thus, the developers tried to satisfy the needs of every business executive so that he could be convinced of them not only in technical specifications, but also in practice.
Carver MT-900 is designed for various types of agricultural work, including mowing grass, harvesting crops and territories, and snow removal. Also available are types of work such as cultivation, plowing, planting and digging up root crops, hilling, and transporting loads up to 500 kg. All this is possible thanks to the support of mounted options, and in this regard this model is not inferior to most of its analogues.
List of additional options
The basic configuration of the unit makes it possible to loosen the soil and simultaneously remove weeds from it along with the roots. The capabilities of the machine allow you to turn it into a multifunctional mini-tractor with extensive capabilities. Almost all user reviews contain recommendations on the advisability of equipping the equipment with additional equipment.
The following options can be installed on the walk-behind tractor:
- Plow. The weight of the unit and a powerful motor create all the conditions for attaching a plow with 2-3 shares to the hitch, which makes it possible to plow a strip up to 100 cm wide. A single share is used when raising virgin soil, digging trenches and developing terrain for a foundation.
- Hiller. This is a very practical device with which beds are formed. As a result of treatment, more oxygen is supplied to the roots of plants, and excess moisture does not remain in them after rain. At the same time, weeds are removed between the beds.
- Various types of mowers. To mow hay, tops and weeds over a large area, it is better to use a rotary mower with a working width of 120 cm. With this device you can easily process up to 1 hectare per day. It is advisable to mow lawns in the yard using a trimmer.
- Devices for growing root crops. Agricultural workers speak positively about potato planters and potato diggers. The devices are rigidly fixed to the back of the walk-behind tractor, providing an immersion depth of up to 27 cm and a working width of 30 cm.
- Snow removal equipment. Using various types of canopies on Carver, the operator can quickly and efficiently remove snow from areas and paths, near gates, garages and fences. A rotary cleaner, a wide decoction and rotating hard brushes are used.
- Trailer devices. A cargo trailer or a combination trolley with seats for passengers can be attached to the walk-behind tractor. The power of the unit is enough to tow a trailer weighing up to 500 kg. To transport cargo through the snow, sleds made of polymer materials are used.
- Weights. In cases where the mass of the unit is not enough for reliable adhesion to the ground, special devices are used. Removable weights are attached to the axle shafts or to the body of the machine. Instead of wheels, you can install ground hooks weighing up to 70 kg and with a diameter of up to 60 cm.
The presence of several speeds allows you to choose the optimal operating mode for performing any kind of task.
Advantages of technology:
- Large wheels with deep tread provide good cross-country ability
- Flexible design allows you to store the walk-behind tractor in a disassembled state
- The powerful diesel component has a positive effect on fuel efficiency
- Ergonomic handle with a comfortable grip, height and horizontal adjustment options
- All controls that are at hand are located on the handle
- Air oil filter
- Reliable gear reducer, made in a cast iron housing
- Resistance to temperature conditions from +1 to +40 degrees
Attachments
The basic configuration of the Carver MT-900 does not have any additional equipment. All equipment is purchased as an option. This is done so that the owner can choose the right set for himself, based on his needs. At the same time, it was possible to reduce the cost of the basic walk-behind tractor to a minimum. But as practice shows, many people buy the device together with attachments, because without them the walk-behind tractor will have limited capabilities and will not be able to reveal its full potential. Let's look at the most popular types of attachments that are in demand among Carver MT-900 owners:
- Plow
- Hiller
- Potato digger
- Potato planter
- Additional cutters
- Seeder
- Ground hook
- Cart
- snow blower
Terms of use
First of all, the walk-behind tractor needs to be broken in. This is a simple process that does not take much time. This procedure will increase the reliability of the walk-behind tractor, and thereby significantly reduce the cost of maintenance. So, running-in consists of the following steps:
- Assemble the walk-behind tractor (if it was just purchased and is in a disassembled state)
- Start the engine and let it idle
- Turn on each speed in the gearbox one by one
- Check all adjustments, switches and other functions
- As soon as the engine warms up well, you can start running it in.
- During the running-in period, it is allowed to carry out hilling, cultivation, plowing and other types of soil cultivation. Carriage of goods is prohibited. As a last resort, you can transport cargo, but their weight should not exceed 50% of the permissible load (250 kg out of 500)
- Break-in lasts only 8-9 hours. After its completion, we drive the walk-behind tractor into the garage, and if necessary, change consumables, fill in new fuel, etc. At this point, the run-in can be considered complete.
Technical parameters and engine
Carver MT-900 is equipped with a 4-stroke diesel engine with a gear reducer. The classic engine layout provides optimal center-to-axle weight distribution. The clutch is multi-plate, and there is also a power take-off shaft. The engine is diesel type, with a power of 9 horsepower. The weight of the device is 173 kg. Starting the engine is mechanical, using a key. The gearbox is three-speed, with two forward and one reverse speeds. The walk-behind tractor is equipped with wheels with dimensions 5x12. The width of the earthen surface is 1350 mm.
The official warranty period for Carver MT-900 is 1 year from the date of purchase of the product.
Specifications
The Carver MT-650 and MT-900 products are delivered to retail outlets in Omsk assembled or packaged. Before leaving the factory, equipment undergoes multi-stage quality control. The completeness of the package, correct assembly and engine performance are checked.
The manufacturer declares the following characteristics of the Carver 900 walk-behind tractor:
- engine - gasoline, 4-stroke, air-cooled;
- working volume - 270 cm³;
- power - 9 hp;
- fuel tank capacity - 6.0 l;
- number of gears - 3 (2 forward, 1 reverse);
- clutch - gear with V-belt;
- power take-off shaft - through a belt and pulley;
- speed (forward and reverse) - 3.6/7.2 and 2.4 km/h;
- wheels - rubber with tread 5.00-12;
- starting - manually with a cord return mechanism;
- weight without additional equipment - 141 kg;
- soil tillage depth - up to 35 cm;
- working width - up to 120 cm.
All units are equipped with a coulter and cutters, which are used on motor cultivators. The packaging contains an instruction manual, which contains detailed instructions on the rules for using the product, its maintenance and storage.
You can expand the functionality of the walk-behind tractor by installing additional options that are purchased separately. Since Omsk is a large city, you can easily and quickly find additional equipment for a walk-behind tractor.
Fuel consumption
The Carver MT-900 walk-behind tractor is an economical device. The diesel engine allows you to save fuel no worse than its competitors, even under increased load. His average gasoline consumption per hour does not exceed 1-1.5 liters. The walk-behind tractor is quite economical, but very demanding on the quality of fuel.
Competitors: Agrostar AS 1100BE-M 9.0, Aurora Space-yard 1350D plus, Garden Scout GS 81 DE, Garden Scout, Neva MB-23SD-23, Garden Scout GS 15 DE, RedVerg Goliath-2-9D, Wima WM 1100 BE.
