Hitachi ZX 330 crawler excavator. Technical characteristics, analogues and prices

Mini excavator Hitachi ZX17U-5A

The Hitachi ZX17U-5A miniexcavator is a tracked earth-moving machine whose dimensions are so small that one can say about it that only a shovel is more compact. At the same time, the equipment effectively copes with its task: it removes soil to a depth of 2190 mm and to a height of 3540 mm. The turning radius of the bucket is 3810 cm. These capabilities are sufficient to use the Hitachi ZX17U-5A in a wide range of earthmoving work.

All models of Hitachi excavators have no backlash in the joints of parts, which is explained by the high precision of assembly. Features of Hitachi ZX17U-5A:

• there is protection for hydraulic cylinders and rods from mechanical impact;
• Additional steel plates are installed on the bottom of the bucket;
• The spacious operator's workplace is equipped with an LCD monitor;
• reinforced platform side members;
• a wide selection of attachments from the ZAXIS series, the assembly of which uses advanced bushings.

Technical characteristics of the HITACHI Zaxis engine - Description of equipment

EX75

The ZX75US-A is a mid-size earthmoving machine. Specifications:

• weight - 7100-7600 kg;
• ground clearance - 360 cm;
• maximum digging radius - 6760 mm;
• boom length - 4270 mm.

The design of the excavator has a peculiarity: the equipment is manufactured on the basis of the Zero-Tail concept, which assumes that the platform does not go beyond the tracked cart when the body is turned. The machine runs on diesel fuel, the hydraulics are equipped with an EP control system, and there is a quick warm-up function for the control circuit. The CC-4JG1 engine is four-cylinder, with a displacement of 3059 cm3.

Hitachi ZX160

The Hitachi crawler excavator is a multifunctional machine, with technical and operational characteristics that are in many ways superior to other representatives of this class of equipment. It has increased stability, but at the same time exerts little pressure on the ground. The model of the installed bucket is a backhoe equipped with 5 teeth. Capacity - 0.52-0.82 m3.

The capabilities of the control system allow the operator to fully control the operation of the machine, connect rear view cameras, and monitor fuel consumption. The excavator is equipped with a theft and intrusion protection system. A distinctive feature of this model is its high performance: it is 10% higher than that of machines with similar technical characteristics.

The tracks are controlled by a two-speed hydraulic motor and stopped by a hydromechanical parking brake. The gearbox is automatic, but the operator is given the opportunity to choose the required speed.

ZX160W

The ZX160W wheeled excavator is designed to perform earthmoving work in harsh conditions. The platform is fully rotatable, mounted on a welded D-shaped frame made of high-strength steel. This ensures reliable protection against deformation. The chassis consists of a frame and two drive axles.

Specifications:

• handle length - 201 cm;
• digging depth (maximum) - 4770 mm;
• digging height (maximum) - 8280 mm;
• HITACHI ZX160W 4-stroke engine, turbocharged and water-cooled;
• fuel tank volume - 280 cm3.

Equipment options:

• bulldozer blade;
• front and rear outriggers (or only rear);
• outrigger and blade.

Purpose

The Hitachi ZX330LC crawler excavator was created specifically for operation in conditions with heavy loads. Therefore, the main area of ​​application is to carry out any work in fields, quarries, mining operations, large industries, and in large-scale construction organizations, including road construction.

The equipment is capable of coping with tasks such as loosening solid soil masses and rocks; compaction of loose soils; creation of soil embankments; loading and unloading various cargoes; leveling the work site; drilling wells of various depths and diameters; opening the asphalt layer of road sections; digging trenches and pits; dismantling of concrete or reinforced concrete objects and much more.

Hitachi ZX180

Hitachi offers several excavator models in the ZX180 series. Among them are tracked and wheeled vehicles. The Hitachi 180 LC excavator is a middle-class equipment with a wide tracked base, which has increased stability when working on swampy and loose soils. Equipped with a boom and handle that allow you to remove soil to a depth of 6600 mm. Bucket capacity 0.4-1.9 m3.

The ZX180W excavator is on wheels, with a maximum speed of 30 km/h. The operating weight of the equipment is 1.88 tons. Equipped with a 4-stroke 4-cylinder Isuzu AI-4JJ1X engine with a cooling system (with a liquid volume of 19.2 l). Equipped with a fully rotating platform of increased strength. Model features:

• improved boom recirculation system;
• built-in function of automatic monitoring of machine condition;
• large cabin glazing area;
• GPS navigation system.

Unlike previous series, ZX180 models are equipped with additional functions, which can be activated by two buttons located on the control panel.

1. Auto Power Lift enables heavy-duty operations by increasing lifting force by 10%;
2. Power Boost - short-term increase in power.

ZX180LCN-3

The ZX180LCN-3 crawler excavator features a narrower operator cabin than other models in the series. The design and power of the machine allows it to be equipped with additional dismantling devices and heavy-duty attachments from the 20-ton ZX200-3. The excavator is capable of reaching speeds of up to 5.3 km/h.

Specifications:

• maximum digging depth - 7070 mm; maximum digging height - 9790 mm;
• digging radius - 9940 mm;
• hydraulics are equipped with a load compensation system;
• engine power - 121 hp

Fuel Consumption Rate Hitachi zx 330

Weight 6.7 t Bucket capacity 280 liters Engine power / model, kW - 40 / CC-4JG1 Max. face radius 6.81 m Maximum unloading height 5.45 m Force 56 kN Speed ​​5 km/h Option: rubber tracks, driver's cabin with satellite navigation

Hitachi ZХ 120 Single-bucket universal

Weight 12 tons Bucket volume 500 l Engine power/model, kW - 66/ СС-4ВG1ТС Max. face radius 8.27 m Maximum unloading height 6.16 m Force, kN-99 Track width, m-0.5 Option: extended or long boom, choice of handle length

Hitachi ZX 110M Universal

Weight 13.7 t Bucket volume 450 l Power 63 kW (ВВ-4ВG1T) Max. face radius 7.7 m Maximum unloading height, m ​​- 5.91 m Force, kN-92. Track width 0.7 m Max. resource and productivity in earthworks

Hitachi ZX 160LC Crawler excavator

Weight 16.6 t Shovel volume 600 l Power 78 kW Force 104 kN Oil consumption 13.6 l/min Marking of lubrication card and electrical circuit Min. fuel consumption.

Hitachi ZX 200LC Hydraulic single bucket construction

Bucket volume 800 l Boom radius 9.91 m Maximum unloading height 6.78 m Force 151 kN Track width 0.6 m Option: execution of rubber parts, main hydraulic components, electrical equipment, electric drive, fuel and oil for the engine capable of operating in the Far North

Hitachi ZX 330LC Hydraulic single bucket medium

Weight 31 t Shovel volume 1400 l Engine AA-6NK1X (184 kW) Reach 11.1 m Maximum unloading height 7.13 m Force 237 kN Caterpillar width 0.6 m Replaceable equipment: grab, hydraulic drill, hydraulic hammer Driver's cabin with excellent visibility and good ergonomics.

Hitachi ZX 350HLC Hydraulic single bucket medium

Weight 32.9 t Shovel volume, l - 1400 Power 184 kW Engine AA-6NK1X Max. radius 11.1 m Maximum unloading height 7.13 m Force 237 kN Track width 0.6 m Option: long handle, dozer blade.

Hitachi ZХ 370МТН Hydraulic single-bucket

Shovel volume 1500 l Largest radius 11.1 m Unloading height 7.24 m Force 237 kN Track width 0.6 m The final drive of the chassis has an increased resource.

Hitachi ZX 180 LC-3 (LCN-3) Hydraulic single-bucket swamp vehicle

Weight 19 t Bucket capacity 700 l Power 90.2 kW (AI-4JJ1X) Max. face radius 8.91 m Maximum unloading height 6.45 m Overall dimensions 9000/ 2800(2500)/ 3100 mm Working equipment: grab, hydraulic drill Option: choice of bucket for working with any soil and any volume

Hitachi ZX 200-3 Crawler excavator

Weight 20500 kg Bucket volume 800 l Max. radius 9.250 m Maximum unloading height 6.83 m Dimensions 9605/ 2860/ 3180 mm Force 132 kN Working equipment: ripper, hydraulic shears Reduced fuel consumption

Hitachi ZХ 225 USR-3 Hydraulic single-bucket full-rotary

Weight 22.7 t Shovel volume, l - 800 Max. radius 9.25 m Unloading 6.83 m Dimensions 8940/ 2860/ 3180 mm Force 132 kN Removable equipment: grab, hydraulic drill, hydraulic shears Option: driver's cabin has a built-in GPS navigator

Hitachi ZX 240-3 Crawler excavator

Weight 23900 kg capacity of a shovel 1000 l Radius 9.690 m unloading 6.99 m dimensions 10270/2990/3370 mm force 159 KN engine 132KVT (ISUZU AH-4HK1XYSA-01) Working equipment: graph, hydrogen, hydraulic mine, loaf, hydrochlorifix mines. duty cycle

Hitachi ZX200 excavator

The Hitachi 200 excavator is a durable medium-class equipment whose caterpillar tracks are driven by an axial piston hydraulic motor. Compared to previous models, the ZX200 has an 11% increase in traction power and a 13% increase in torque. The wide tracked base gives the vehicle stability and maneuverability. High depth, height and digging radius allow the excavator to work with dump trucks and other equipment of this class.

Characteristics:

• reaches speeds of up to 5.5 km/h;
• bucket breakout force - 15 t;
• track length - 3.37 m;
• engine power - 166 hp;
• fuel tank volume - 360 l.

Runs on diesel fuel. It is additionally equipped with two electric motors, which increases the power of the machine.

ZX200-5G

A distinctive feature of the ZX200-5G model is its lighter weight than other representatives of the line of mid-class earthmoving machines. The excavator is wider and more powerful than the ZX210LCN-G. There are two more models in the ZX200-5G line:

• for work in difficult conditions (marked with the letter “H”);
• to carry out dismantling work (marked with the letter “K”).

The ZX200-5G excavator has a spacious and comfortable operator's cabin equipped with an air conditioning system (present in all models of this manufacturer).

All machines in this series are equipped with booms with a reinforced rubber bucket stop plate.

The cooling system is located in close proximity to the radiators, which allows work to be performed at high ambient temperatures.

Hitachi ZX200LC-5G excavator

The ZAXIS-5G series is the most economical among all other mid-range machines. Previous models of earthmoving equipment operated in PWR mode, which reduces fuel consumption by optimizing work operations. The ZAXIS-5G series uses an economical mode (ECO), which reduces fuel consumption by 9%. Moreover, this does not affect the performance of the machine. The fuel consumption rate for ZAXIS-5G is 1.5-2 l/hour.

Characteristics:

• 6-cylinder engine, power 109.6 kW;
• bucket volume - 0.51-0.91 m3;
• platform rotation speed - 13.3 rpm;
• maximum digging depth - 5980 mm;
• maximum loading height - 6390 mm;
• track width - 2390 mm.

The control system has a Power Boost mode, which allows you to increase digging force by 10%. To do this, the operator needs to press just one button.

Excavator ZX240

The Hitachi 240 crawler excavator is a highly productive piece of equipment that can be optimized to suit customer requirements. The basic package includes:

• boom 6000 mm long;
• three handle options: length 2500, 2960 and 3610 mm;
• bucket with a volume of 0.8 m3.

The design is based on an x-shaped beam, the strength of which is 35% higher than that of previous models. The reinforcement was made by replacing welded plates with metal plates, each of which is a monolithic channel.

The description of the technical characteristics makes it clear that this machine can be used in a wide range of jobs:

• earthmoving;
• road;
• loading and unloading;
• leveling of territories;
• formation of embankments;
• opening of asphalt pavement;
• cleaning the bottom of reservoirs.

This model has reinforced side tracks. Engine 177 hp located on the platform, behind the operator's cabin. Fuel consumption is monitored by an electronic system. Equipment performance indicators are displayed on the LCD display in the operator's cabin.

Operator's cabin

All cabins of Hitachi excavators are unified and the same for all models and modifications. Much attention was paid to ease of use and maintenance. In particular, the strong handrails and corrugated iron floors provide safety and the spacious cab provides comfort. Air conditioning and a sliding front window are standard.

The controls are made in the form of joysticks. The control system is equipped with a 7-inch color display that displays all the basic information about the state of the machine (hydraulic oil temperature, fuel level and other parameters important for operation). The image from the rear view camera is also displayed on it.

Hitachi ZX330

The Hitachi 330 excavator is a powerful earth-moving machine. The equipment is designed to systematically perform complex heavy work and is characterized by high productivity. Consumers note the difficult operation of the machine, which is due to the presence of numerous automated work steps. Another difficulty in operating an excavator is caused by the low speed of movement for this category of machines: up to 5.5 km/h.

Specifications:

• engine AH-6HK1XYSA-01 4-stroke, 6-cylinder, power - 275 hp;
• tank volume - 560 l;
• digging depth - 8180 mm.

When developing the car, close attention was paid to its chassis. The base part was equipped with beams made of profile pipes, and the protection of the central frame was strengthened. The upper brackets were made larger. All these innovations slightly increased the weight of the equipment, but made it more durable and durable. The model was tested under extreme conditions with large temperature differences.

ZX330LC

The ZX330LC excavator is a modification of the ZX330. Differences from the base model:

• extended base;
• The tracks on the excavator were extended by 1 road wheel.

Machine characteristics:

• weight - 33.1 t;
• maximum speed - 5.5 km/h;
• track - 590 mm;
• ground clearance - 500 mm;
• track base - 4050 mm.

ZX330-3

This model features an improved arrangement of the oil cooler and radiator. The developers installed them parallel to each other. In previous models, these machine elements were located sequentially. The improved layout of the units ensured easier maintenance and repair.

There is now access to the air conditioning condenser, which in this model is located on the side of the cabin, and not behind the seat. Another innovation is the extension of the intervals between oil and filter changes. Operating a Hitachi excavator of this modification has become easier.

Machine characteristics:

• diesel engine with turbocharging, 6-cylinder, power - 275 hp;
• digging height (maximum) - 10750 mm;
• digging radius (maximum) - 11860 mm.

Hitachi ZX330-5G excavator

The ZX330-5G excavator features a reinforced chassis. The platform's movement is controlled by the advanced HIOS III hydraulic system. This made it possible to achieve high speed of movement of the working equipment.

Machine characteristics:

• total weight - 31.5 tons;
• counterweight weight - 6.35 tons;
• track base - 370 mm;
• fuel tank - 630 l;
• hydraulic system (volume) - 340 l.

Hitachi 330 working tools

The Hitachi 330 excavator is an earth-moving equipment, and is equipped with a set of the following tools that significantly expand its functionality: 1. A regular bucket with a volume of 1.15 cubic meters, used for digging pits with unloading into a dump or into a vehicle. 2. The rock bucket is designed for working with hard rocks, and has special reinforcement for such work. 3. Leveling bucket 2.5 meters wide. Used for leveling the soil, for removing the top layer of soil, for example, black soil. 4. The hydraulic hammer is used for breaking and crushing concrete structures and large rock blocks. 5. The uprooter cuts through hard rocks and frozen soils. 6. Five-leaf grab is used to grab scrap metal and large bulk materials.

ZX350

The ZX350 excavator is a representative of the latest generation of earthmoving machines. Equipped with a 6-cylinder power plant, which is developed by Isuzu. The unit is equipped with a modernized fuel supply system, has a low noise level, and has turbocharging. All this made it possible to achieve high engine power levels.

The hydraulic block circuits have been improved. Thanks to this, it was possible to achieve more efficient use of hydraulics to increase the speed of work operations. The machine is characterized by economical fuel consumption, low vibration levels, and a high degree of operator comfort.

ZX350L-3

The ZX350L-3 excavator is based on the base ZX350 model. It differs from it in its elongated base and reinforced structure. Designed for work in difficult and especially difficult conditions. This model has a reinforced chassis and an additional high-power pump. Installation of attachments is possible.

Distinctive features of the model:

• the front section of the boom and arm have been strengthened;
• The design of the bucket allows you to work with rocks;
• the counterweight has been increased (its weight is 7.4 tons);
• reinforced bottom flange;
• full protection of the tracks is provided;
• The tension wheel brackets have been improved.

About the nuances

“The reliability of the tracks and wear depend on the operator and the soil on which the work is carried out. If you work on a sand or clay mixture, then the rollers, sprockets and sloths wear out.

The link is wearing out. The tracks themselves need to be changed very rarely. An excavator is not a bulldozer. He doesn’t travel that much.”

Hitachi ZX450 excavator

The Hitachi 450 excavator belongs to a generation of earthmoving machines that combine high productivity with maximum operating comfort. Features of the basic model of this series include:

• economical fuel consumption mode;
• advanced HIOS III hydraulics;
• powerful diesel power plant is equipped with electronic control;
• the multifunctional monitor provides complete information about equipment operation and fuel consumption;
• simplified maintenance system;
• protection against unauthorized entry into the operator's cabin is provided.

The excavator is equipped with a power boost system and is distinguished by low engine noise. The oil is changed after 5 thousand hours.

What factors affect the fuel consumption of a Hitachi excavator?

The fuel economy and fuel consumption of a diesel engine under normal conditions, as such, depends on many factors:

, diesel fuel
• Correct setting and adjustment of fuel equipment - high pressure fuel pump (HPF)
• Power, diesel volume
• Clogged or clean fuel filter, as well as air filter
• Normal combustion with correct compression in the engine
• Under load and at idle
• Etc.

On all types of Hitachi excavators (wheeled and tracked), fuel consumption at idle starts from 1.5-2 liters per hour. This applies to Hitachi ZX 180, 200, 250. On more powerful excavators, according to the passport and in practice, the discrepancies will be more significant, because both the quality of diesel fuel and the fuel injection pump setting are superimposed. On a Hitachi 330, about 2-3 liters are spent at idle. In fact, it's quite economical.

In economical modes, depending on the engine load on Hitachi excavators from 18 to 30 tons, fuel consumption increases and ranges from 15-25 l/h.

Under maximum load of hydraulic pumps, the flow rate can even go beyond 25-30 liters per hour of operation, but productivity also increases significantly.

It must be remembered that a correctly adjusted injection pump produces the required amount of diesel fuel without “overflowing”. The exhaust should not be smoky. If there is an increased level of smoke, then most likely there will be an increased consumption of diesel fuel.

Modern diesel engines from Hitachi are equipped with a distributor-type high-pressure fuel pump. Older ones are in-line, which is more maintainable, easy to adjust and operate.

These are Hitachi EX models - 120, 180, 200, 240, 300 and others.

Fuel consumption is also directly affected by timely maintenance:

• Changing oil and air filters
• Changing oils (engine, hydraulic - if contaminated, distributors, valves, etc. may not function properly)
• Changing antifreeze (“over-running” it leads to increased corrosion, up to the appearance of shells and the penetration of this liquid not only outside, but also into the engine)
• Necessary adjustments and settings.

The on-board computer of the excavator is able to remind you about current maintenance, and also show the remaining number of engine hours before it starts. This is quite convenient and allows you to plan the time for performing this type of work.

Hitachi ZX470

The ZX470 crawler excavator is a maneuverable machine, despite its large dimensions. Equipped with a 4-stroke power plant with a fuel injection system. The characteristics of the machine meet environmental safety requirements. Each track is controlled by an axial piston hydraulic motor. The machine is capable of working in difficult conditions and overcomes slopes at an angle of more than 35°.

Compared to previous models, it is more powerful, with a reinforced chassis. The cooling system has been improved, allowing for smoother air flow. Each track shoe has three steel lugs, and the track tensioners are equipped with shock absorbers.

The machine is capable of working with different buckets, which allows it to perform a wider range of tasks. The main elements of the chassis (central frame and peripheral sections) are a one-piece structure, as they are securely welded to each other. Increased operator comfort:

• the design of the side step for climbing into the cabin has been improved;
• the degree of susceptibility of the cabin to impacts and jolts from the turntable is reduced;
• the work chair is equipped with a headrest and armrests;
• it became possible to adjust the tilt of the chair back and move the seat forward;
• The multifunction display allows you to tune the radio and see information from the rearview cameras.

ZX850

The ZX850 mining excavator is designed to handle demanding construction and mining applications. It has all the advantages of the latest generation of earthmoving machines.

1. Equipped with a powerful environmentally friendly engine.
2. A balance is ensured between the speed and power of the machine.
3. The glass area of ​​the cabin has been increased, which has improved visibility.
4. The shape of the headrest has been improved.
5. The chair is highly ergonomic.
6. The engine is cooled by an automatically started fan with a diameter of 11.2 cm.
7. The maximum digging radius is 14 m.
8. Boom length - 8.4 m.
9. Handle length - 3.7 m.

In this model, the fuel tank volume is increased to 1120 liters. The machine platform is capable of turning at a speed of 7.3 rpm. The maximum bucket capacity is 4.5 m3. Thanks to the long boom and handle, the digging height and depth are high: 13820 and 9570, respectively.

ZX870

The ZX870LCR-3 mining excavator belongs to the category of heavy-duty equipment. The total weight of the machine is 85.5 tons. In this model, the boom is a monolithic high-strength plate with a reinforced end of the handle. Improvements have also been made to the bracket.

The power plant received improved protection against rock damage. The engine was equipped with a durable cover and a protective casing. This excavator is equipped with a 6-cylinder Isuzu engine with direct injection and turbocharging.

The glass in the operator's cabin is reinforced and can withstand strong impacts. The windshield is laminated. The strength of the cabin is increased due to the reinforcement of the roof. The operational safety level of this equipment complies with FOPS.

Model characteristics:

• digging radius (maximum) - 14100 mm;
• digging height (maximum) 13000 mm;
• digging depth (maximum) - 8870 mm;
• bucket volume - 4.3 m3.

Hitachi EX1200 excavator

The manufacturer characterizes its EX1200 excavator as gigantic and highly powerful. The machine is equipped with a Cummins QSK23-C injection engine. Compared to previous models, power has been increased by 9%. Thanks to this, it was possible to achieve an increase in boom lifting force by 8%. This large-sized machine is quite maneuverable and easily overcomes inclines.

The model developers abandoned the improvement of the suspension and invented another one that has no analogues. This ensured a reduced level of vibration, which increased the comfort of operating the machine.

Characteristics:

• ground pressure - 112-146 kPa;
• bucket capacity - 6.5 m3;
• total width of the track base - 5430 mm;
• movement speed (maximum) - 3.5 km/h;
• fuel tank volume - 1470 l.

Despite its power and large size, the excavator is characterized by economical fuel consumption. This model embodies a wide range of advanced technical solutions, thanks to which it can be called safe, comfortable and highly productive.

Cost of Hitachi 330 and its analogues

Prices for a new excavator now vary between 6-7 million rubles. The cost of used cars depends on the region where they are sold, on the technical condition, year of manufacture, and starts from 3.5 million rubles. Renting special equipment is good for one-time jobs. But when there is regular quarrying or extraction of any material, special equipment is needed throughout the entire shift and every day. In this case, for the efficient operation of the enterprise, it is advisable to buy an excavator such as Hitachi.

Be sure to read: Excavator ECG 10

Analogues of Hitachi zx 330 include:

• Hitachi 200, which is the predecessor,
• improved, modernized HITACHI ZAXIS 330-3.
• heavy (45 tons), but belonging to the same weight category Hitachi ZX450-3.

All of them differ only in weight and some technical parameters.