Technical capabilities of the Liebherr LTM crane (100 tons)

Maximum load capacity 100 tons with reach 2.7 m

Telescopic boom
11.5 - 52 m
Boom extension (jib)
missing
Engine/power Liebherr engine / 370 kW

Drive / steering
8 x 8 x 8
Travel speed 80 km/h

Weight in transport position
60 t
Total counterweight weight
35 t
The safety system is equipped with a LICCON load limiter, a system for testing the performance of working units, safety and shut-off hydraulic valves in case of rupture of hydraulic lines. Safety during work is ensured by fully electronic active steering of the rear axles and pneumatic disc brakes.

The minimum dimensions for such a load capacity provide maximum maneuverability and allow you to work in the most limited conditions.

High lifting capacities are ensured with both full and partial use of ballast. The truck crane is equipped with a system that, in some cases, ensures safe movement with a load without setting outriggers.

Areas of use of a truck crane

The largest truck crane in the world is the brainchild of German manufacturers, and loudly declared itself in 2007, when it was included in the Guinness Book of Records. The Liebherr truck crane belongs to the Liebherr-International AG concern and is named after its founder Hans Liebherr.

The power of the lift is given not only by its dimensions and appearance, but also by the eight-section boom with telescopic blocks. The Liebherr LTM 1100 truck crane is used in many areas; it is used to carry out:

Liebherr LTM 1100 truck crane in operation

• repair and restoration work;
• construction;
• cargo transportation;
• loading and unloading large cargo;
• housing and communal works;
• ensuring emergency and fire safety;
• clearing away rubble.

Large organizations whose activities are related to production or industry use a truck crane of this model in logistics systems, where wide opportunities open up for unlocking its potential. Liebherr is often used by special units of the Ministry of Emergency Situations of the Russian Federation to rescue citizens and clear landslides and heavy piles.

Reliable Liebherr truck cranes: advantages of different models

Liebherr-International AG (Switzerland) is a transnational holding company, one of the TOP 10 largest global manufacturers of construction heavy equipment. Liebherr truck cranes are known for their quality and reliability all over the world.

About the manufacturer

In 1949, Swiss engineer Hans Liebherr headed his parents' construction company in Germany.

In the post-war years, the country was sorely short of equipment for housing construction, then Hans and a group of designers created their first quickly erected slewing tower crane .

At the same time, Liebherr founded a machine-building plant in the German city of Kirchdorf an der Iller for serial production of these machines.

This is how the Liebherr family business was born. Gradually mastering different areas of industry, the company built more and more factories and representative offices around the world, today there are already more than 130 of them.

In 2011, a plant was launched in Russia in the Nizhny Novgorod region.

The group of companies produces different types of equipment. The holding produces mining, mine, port equipment, marine cranes, concrete transport, concrete mixing, refrigeration/freezing equipment, aircraft parts and aerospace equipment.

The group of companies has paid the greatest attention to construction equipment since its founding.

Types of Liebherr cranes

Liebherr produces a variety of cranes: port, reach stacker, ship, marine, offshore, crawler and mobile.

There are specialized fire and military cranes, armored, designed for evacuation, eliminating the consequences of natural disasters, and clearing debris.

The most popular of the variety of models are everyday construction mobile cranes .

All mobile models of cranes are divided into several types:

LTM - with a telescopic boom of 17 standard sizes. Speed ​​on highways and off-road = 80-85 km/h.

Liebherr crane design

The technical characteristics of the Liebherr 100 ton make it stand out from other mobile cranes. The basis of the model is an all-terrain four-wheel chassis, the drive of which has 8x8x8 dimensions. The pride of this piece of special equipment is a 60-meter telescopic boom with 7 sections. The boom is designed to lift loads with a tonnage of up to 100 tons, while the boom reach can reach three meters relative to the axis of rotation.

Liebherr LTM 1100 truck crane

The Liebherr LTM crane design includes:

• turbodiesel engines with the least amount of toxic emissions;
• chassis with a six-cylinder diesel engine and automatic transmission, with three main and one additional drive axle;
• separate cabins for the operator and driver, which, in turn, simplifies the control process;
• pneumatic disc brakes;
• a safety system based on a number of safety valves, brakes and limiters.

Dimensions LIEBHERR LTM 1100

Dimensions in the figure are given in mm. A - 4000, B - 2750, C - 2310, D - 1940, E - 2975, F - 3130, G - 3705, H - 23°, I - 18°, K - 25°; R — trajectory when turning the front wheels; R1 - trajectory when turning with all wheels;

Below you can see the technical characteristics of other truck cranes

LIEBHERR available for
order
:

Parameters of the German leader

The Liebherr LTM 1100 is designed for 100 tons and belongs to the group of 4-axle mobile cranes, the maximum boom height distance is 91 m. The following performance characteristics are typical for this mobile crane:

Liebherr LTM 1100 crane dimensions

• Liebherr turbo-diesel engine with a power of 476 hp. With.;
• lattice extension 10.8-33 m long;
• average speed – 85 km/h;
• ballast weighing 28.2 tons;
• equipment weight – 60 tons;
• load capacity – 100 tons;
• dimensions: 13,503 x 2,750 x 4,000.

To move steadily, the truck crane is equipped with 9 main axles, which are controlled by 18 wheels. Liebherr has high fuel efficiency thanks to 12 gear speeds and two additional ones for reverse. The truck crane involves automatic brake locking, achieved using ABV assist technology. Traction is transmitted using an automatic transmission, and slow speed is provided by a two-stage transfer case. Deceleration speed - 0.46 km/h.

The security system, equipped with two independent processors that read data from sensors, deserves special attention. All information is reflected on the central display, and the operator can always monitor the status of all components and systems. The steering of the truck crane, characterized by five modes and ergonomic placement of levers and switches on the dashboard, also simplifies the operation.

Load capacity and other properties of the Liebherr crane

German manufacturers produce several models of Liebherr cranes with a tonnage of 40, 50, 70, 100 tons. The Liebherr LTM 1100 truck crane has the maximum lifting capacity. In general, lifting capacity indicators depend on the height of the boom and have the following ratio:

Load capacity of Liebherr LTM 1100

• 11.5 m – 100 t;
• 15.2 m – 65 t;
• 26.4 m – 51.3 t;
• 33.9 m – 32.8 t.

The Liebherr mobile crane's lifting capacity is increased by many telescoping options. High load capacity allows you to transport large-sized equipment and fragile items in a vertical and horizontal plane. Electronic control allows you to install special supports on the truck crane, due to which the maximum possible lifting capacity increases.

The special vehicle has a built-in data frame, like an on-board black box, which records the operation of the crane in real time. The mobile crane's maneuverability and compactness are ensured by its turning radius, which is 11.01 on all-wheel drive. The counterweight has a turning radius of 4.1 m.

Liebherr ltm 1100 truck crane technical specifications

Maximum load capacity 100 tons with reach 2.7 m

Telescopic boom
11.5 - 52 m
Boom extension (jib)
missing
Engine/power Liebherr engine / 370 kW

Drive / steering
8 x 8 x 8
Travel speed 80 km/h

Weight in transport position
60 t
Total counterweight weight
35 t
The safety system is equipped with a LICCON load limiter, a system for testing the performance of working units, safety and shut-off hydraulic valves in case of rupture of hydraulic lines. Safety during work is ensured by fully electronic active steering of the rear axles and pneumatic disc brakes.

The minimum dimensions for such a load capacity provide maximum maneuverability and allow you to work in the most limited conditions.

High lifting capacities are ensured with both full and partial use of ballast. The truck crane is equipped with a system that, in some cases, ensures safe movement with a load without setting outriggers.

Load capacity diagram for LIEBHERR LTM 1100 without jib

Load capacity values ​​are given in tons; The boom reach is measured from the axis of rotation of the turntable; The lifting capacity values ​​for the boom are only valid with the jib removed;

Changes in load capacity are possible.

Dimensions LIEBHERR LTM 1100

Dimensions in the figure are given in mm. A - 4000, B - 2750, C - 2310, D - 1940, E - 2975, F - 3130, G - 3705, H - 23°, I - 18°, K - 25°; R — trajectory when turning the front wheels;

R1 - trajectory when turning with all wheels;

Below you can see the technical characteristics of other truck cranes

LIEBHERR available for
order
:

Advantages of special equipment

To ensure that truck crane tenants have no doubts, they should pay attention to the strengths of the Liebherr truck crane:

Liebherr LTM 1100 - rear view

• maximum load capacity;
• long boom reach;
• innovative equipment;
• advanced technical characteristics and technologies;
• availability of branded Liebherr units;
• high level of boom operation control;
• attractive modernized design;
• comfortable interior decoration;
• first-class security, air conditioning and ventilation systems.

All these advantages not only simplify the operator’s work, but also increase productivity and the quality of work performed. Thus, Liebherr 100 tons 1100 is an excellent choice not only for owners of large production and construction facilities, but also for individuals faced with the problem of large cargo.