MF 70 Czech mower - instructions, comparison with analogues and dealer analysis

Czech segment-finger mower MF-70
Walk-behind tractors are used in small farmsteads. The owners of a walk-behind tractor will be able to prepare the land before planting, carry out maintenance or harvesting, remove snow in winter, and level the lawn in summer. To carry out the work, additional equipment is required: a plow, a mower, a rake, etc. Narrow-profile equipment is produced separately, which costs less than a walk-behind tractor and copes with certain tasks no worse. This includes the mf 70 mower. Let’s take a closer look at the design of the motorcycle model, its pros and cons. And the photos and videos in this article will help the reader better understand what will be discussed.

Description of the mower

Before studying the technical parameters of the MF 70 mower, it is advisable to familiarize yourself in more detail with its characteristic features. In its appearance and design, such a device is reminiscent of modern walk-behind tractors.

With their help, farmers can perform many tasks, for example, cultivate the land, carry out sowing work, and clear areas of debris or snow if they have a special blade. Unlike similar devices, a motor mower is a highly specialized unit that does not provide for the use of various types of additional equipment.

The MF 70 mower is an analogue of a walk-behind tractor

The MF 70 model is mass-produced by the Czech concern Agrozet, specializing in the production of various agricultural machinery. At the same time, a significant part of the company’s products is supplied to the Russian Federation, which allows you to purchase new and used Czech MF 70 mowers on Avito throughout Russia.

Among the functionality of such a device it is worth mentioning:

• mowing soft grass;
• snow removal;
• transportation of small loads.

Despite the fact that such a device is significantly inferior in functionality to more modern walk-behind tractors, it is still widely used due to its affordable cost, abundance of spare parts and long service life.

Among the advantages of the product, we should first of all mention its small size, ease of operation, mobility, as well as its affordable cost, which allows you to avoid serious financial investments. However, it is not recommended to use the model for cultivating areas with hard grass, since its efficiency will be extremely low.

Similar models

MF 70 mowers can be easily found on sale even in 2022, but in order to get a quality assistant in hay harvesting, you do not have to purchase this particular model. From a large number of similar devices, you can choose a product that is not inferior in basic technical parameters to the original product. This category of hay harvesting equipment includes:

1. Eurosystems Minieffe 502 625 Series Motor Mower is a modern compact mower equipped with a 190 cm3 four-stroke petrol engine. The device has only one gear for forward movement, but given the relatively light weight of the product, maneuvering in the opposite direction can be easily carried out by the operator.
2. Tielburger T60 B&S – the cutting width of this mower model is 97 cm, so this equipment is perfect for working on large areas and between rows of trees. The power of the device is 5.5 liters. s, so this model is ideal for replacing a device like MF 70. The mower weighs 100 kg.
3. AL-KO 112871 BM 870 III is a small model with a working width of only 87 cm. Thanks to the presence of an economical 2.5 liter engine. With. The device consumes a small amount of fuel.

The equipment is equipped with a four-stroke power unit, which frees the operator from the need to add oil to gasoline before refueling. The device is equipped with only one speed for forward movement, but given the inability to use the product with a trailer or other attachments, there is no need for additional gears.

In addition to the listed models, there is a large number of other equipment that can be used for making hay. For example, mowers installed as additional equipment on many models of walk-behind tractors are in great demand. You can also purchase a small tractor, which can also be equipped with a header of suitable size and performance.

MF 70 device

One of the characteristic features of the product that distinguishes it from modern analogues is its non-standard design. It is based on a gearbox housing, behind which there is a gearbox used to change gears when performing work.

Be sure to read: How to make a cutter for a walk-behind tractor with your own hands

A power unit is mounted on the body, thanks to which the mower is driven. On each side of the body there are wheels equipped with brake mechanisms, and the PTO (power take-off shaft) is located in front of it.

The steering wheel, which controls the movement of the mower, can be adjusted in height, which allows you to adapt the device to the anatomical features of the operator. The clutch control is located near the steering wheel, allowing you to quickly change gears.

Worth mentioning is the presence of an air engine cooling system, which allows it not to overheat during intensive use in hot climates. The design of the product includes a carburetor, and the ignition system is simple and reliable, operating in manual mode.

The mower can work with additional attachments

An important element is the working element - a segment-finger mower. It is based on a load-bearing and cutting parts equipped with a drive mechanism, which allows for high quality mowing without damaging the root system of plants.

Adjustment of the bevel level is carried out before performing work using the appropriate support units. The mower drive is housed in a housing, which allows it to be protected from mechanical stress during operation.

Specifications

One of the advantages of the model that makes it popular is its excellent technical characteristics, which allow it to successfully cope with mowing grass. Among them, it is worth mentioning the following parameters:

• engine - single-cylinder, two-stroke, volume 218 cm3;
• gearbox type - manual with 3 steps;
• maximum speed - 6.9 km/h;
• operating speed - 2.5 km/h;
• grip - 14 cm;
• productivity - 0.3 ha/h.

When planning to purchase such a product, you should remember that it is still being produced. On sale are not only used options that may require repairs, but also new products. Prices for spare parts for the MF70 mower are extremely low, which reduces operating costs.

Be sure to read: Technical characteristics of Agros walk-behind tractors

Motor mower MF 70 - a small assistant for making hay

Small agricultural machinery began to be created a long time ago and was aimed at facilitating labor and performing work in areas that cannot be processed with large equipment. And the use of large equipment in small areas is not advisable.

Motor mower MF-70

Nowadays, the entire range of work on a small plot can be performed with a walk-behind tractor, using all kinds of interchangeable working parts: cutters, plows, planters, hillers, etc. In fact, a walk-behind tractor with a large number of attachments is a universal unit. But in addition to walk-behind tractors, highly specialized small equipment was also produced. An example of this is the MF 70 motorized mower.

The MF 70 motor mower was produced by the Czech company Agrozet. This company was engaged in the production of small agricultural machinery, as well as agricultural equipment. units since the post-war period.

Device

The main feature of this motor mower can be considered a somewhat unusual design if you compare it with a walk-behind tractor. The load-bearing part of the walk-behind tractor was the gearbox housing. The rear part housed the gearbox, and the power unit was attached to the gearbox housing. On the sides of the gearbox there were wheel flanges in which the brake mechanisms were located.

In the front part of the gearbox there was a power take-off shaft housing, which was also intended to secure the working parts. This housing housed the shaft as well as the clutch. The mower's steering wheel was attached to the upper part of the gearbox, to which the controls for the accelerator, gearbox and clutch, power take-off shaft clutch, and brakes were located. The steering wheel itself was height adjustable.

The power plant used on the MF 70 mower was designated 1Z 22. This is a single-cylinder, two-stroke unit, the cylinder was located vertically. It was cooled by air. The power supply system is carburetor. The power plant was started using a manual starter.

Torque from the crankshaft was transmitted to the gearbox through a friction clutch. The box itself had two speeds for moving forward and one for reverse. From the box, torque was transmitted through a gearbox to the wheel drive shaft via a worm gear. The wheels on the MF 70 were pneumatic. Photo of mower MF-70

Working body

The main working body, the mower, was fingerless, segmented. The cutting apparatus consisted of a supporting beam, a segmented cutting blade, and a drive mechanism. On the sides of the beam there were shoes, with the help of which the height of grass mowing was adjusted.

The drive mechanism of the cutting apparatus was located in the housing. The assembly of the MF 70 mower with the working element was quite simple: The housing of the drive mechanism was put on the housing of the power take-off shaft, and the shaft itself was engaged with the drive mechanism. And the body of the working body was fixed with a locking pin.

A coupling device was located under the gearbox housing under the power unit to connect the mower to the trailer.

Specifications

The characteristics of the Czech motor mower MF 70 are generally modest, but if you consider that this equipment is intended for farmsteading, then they are quite sufficient.

Characteristics of the motor mower MF 70:

The video shows the Czech mower MF-70 in action:

Mower engine

The most important element of the mower design is the engine, characterized by a long service life and high build quality. Its power reaches 5 hp, which is enough to mow most types of grass. Its model identification number used to find parts is 1Z 22.

Fuel consumption

The design of the product provides for a fuel tank with a capacity of 5 liters. Low fuel consumption, achieved thanks to an economical engine, allows you to process up to 1 hectare of area without additional refueling, which makes the device incredibly convenient to use.

WRCBUX.RU

Tools for the garden and home

Czech brush cutter Mf 70 Engine replacement

Motor mower

MF 70 – small assistant for hay making

Small agricultural machinery began to be created a long time ago and it was focused on facilitating labor and performing work in areas that are impossible to process with large equipment. Well, the use of large equipment in small areas is not targeted.

Motor mower MF-70

At the moment, the entire range of work on a small area can be performed with a walk-behind tractor, using various interchangeable working parts with it: cutters, plow, planters, hillers, etc. In fact, a walk-behind tractor with a huge number of attachments is a universal unit. But in addition to walk-behind tractors, highly specialized small equipment was also produced. An example of this is the MF 70 motorized mower.

Motor mower

MF 70 was carried out by the Czech company Agrozet. This company was engaged in the creation of small agricultural equipment, also agricultural. units since the post-war period.

Device

The main feature of this motor mower can be considered a somewhat unusual design if you compare it with a walk-behind tractor. The load-bearing part of the walk-behind tractor was the gearbox housing. In the rear part there was a box, and the power unit was attached to the gearbox housing. Along the edges of the gearbox there were wheel flanges, in which the brake mechanisms were located.

In the front part of the gearbox there was a power take-off shaft

, which was also intended to secure the working bodies.
This housing housed the shaft and also the clutch. The steering wheel of the mower was attached to the upper part of the gearbox, to which the controls for the accelerator, gearbox and clutch, take-off , and brakes were located. The steering wheel itself was height adjustable.

Czech mower MF-70, correct engine operation

For sale! Not broken in, has been in storage since 1981. Perm. Ts.100t.r.

MF 70 mower with 4 stroke.

The power plant used on the MF 70 mower was designated 1Z 22. This is a single-cylinder, two-stroke unit, the cylinder was placed vertically. Its cooling was airy. The power supply system is carburetor. The power plant was started using a manual starter.

Connection and rules for using the mower

The device is easy to connect and configure, allowing it to be successfully used even by novice users. As a rule, detailed recommendations for preparing the product for use are contained in the instructions included with new models.

You will need to mount the drive mechanism on the PTO, and also secure the housing using a pin. If you plan to remove snow or debris, you will need to install an auger snow blower, bucket or other attachment. You can mount a trailer on the device, which will simplify the transportation of goods up to 30 kg.

MF 70 Czech mower - instructions, comparison with analogues and dealer analysis

Czech segment-finger mower MF-70

Application of a small motor mower

The Czech mower is an independent piece of equipment, powered by a small but powerful motor. The model is produced by the Czech company “Agrozet”. The company has been operating since the post-war years. They specialize in the manufacture of small agricultural machinery and various equipment for walk-behind tractors and mini-tractors.

The mf 70 mower has been designed for mowing soft grass. But the equipment has additional functions: snow removal and transportation (for transporting light loads). In fact, the equipment can replace a low-power walk-behind tractor in a small farm.

Thanks to its unusual design and low weight, the equipment can easily cope with grass in the most inaccessible corners of the site. And the price, which is lower than for walk-behind tractors of similar power and functionality, made the model popular in Russia. New and used models are brought to us. You can easily find them online at a more reasonable price. You can see in more detail how the fm 70 model of motor mower works and looks in the photo in this article.

Features of the mower device

Spare parts for mower MF-70

If we draw an analogy with walk-behind tractors, then the design of the mf 70 model is very interesting. In a small mower, the gear housing performs the load-bearing function. At the rear there is a gearbox, and the power plant is located on the gearbox housing. On both sides of the gearbox there are wheel flanges where the brake devices are mounted. The power take-off shaft is located in front of the gearbox, it is also intended for attachments.

The shaft housing houses the clutch and the shaft itself. A steering device is mounted on top of the gearbox. The clutch and gearbox controls are located on the mower's steering wheel. The steering mechanism can be adjusted to different heights. Therefore, operating the device is convenient for an operator of any height.

The power plant used on the mf 70 model is called 1z22. The power plant is single-cylinder with vertical mounting. The cylinder is two-pin.

The MF 70 mower has an air cooling system, so it does not overheat during operation. Power is provided by a high-quality carburetor. The system starts from a manual starter.

The crankshaft transmits torque to the gears using the clutch. The gearbox has three speed modes: two forward and one reverse. The mower moves on pneumatic wheels.

Grass cutting unit

The fm 70 motor mower is a segment-finger model. The cutting mechanism consists of cutting and supporting bars with a drive mechanism. During operation, the cutting bar begins to oscillate, while the supporting bar remains in place. Sharp fingers cut vegetation evenly and do not damage the root part of the lawn grass.

The cutting unit is located on two shoes, which allow you to adjust the bevel level. The drive from the cutting element is located in the mower body, therefore it is reliably protected from damage.

How to properly connect the mower?

Compared to walk-behind tractors, any beginner can connect and assemble a mower. Detailed connection instructions are included with the new model.

The drive mechanism is placed on top of the power take-off housing. The body of the working part of the mower is fixed using a special pin.

At the owner's request, instead of the fm 70 mower, a snow blower or a small bucket can be attached to the body. Instead of a segmented working body, a rotary one with one disk and 4 knives is provided.

Below, under the power unit, the mower has a small connecting element to the trailer. Therefore, the owner will be able to attach a small trolley with a load capacity of up to 30 kg to the assistant.

You can store the motorcycle assistant in a garage or under a canopy in a dry and ventilated place.

Pros and cons of technology

Despite its low power and modest technical performance, the mower can be used for many types of work in a small private household. And even a woman can handle the controls.

The advantages of the fm 70 mower include:

• Small sizes;
• Functionality;
• Mobility;
• Affordable price.

The disadvantages include:

• Low productivity;
• Does not cope with tough vegetation;
• It is difficult to buy some components and spare parts.

Reviews of the mower are mainly related to its technical characteristics and build quality:

We were choosing whether to buy a Chinese walk-behind tractor or a Czech fm 70 mower. The neighbors persuaded us to buy the latter. Among the advantages, I will highlight the lightness and size of the equipment. It copes with the grass in front of the house in no time. But it didn’t work out to mow down the small bushes. It chews and the motor heats up.

The fm 70 mower did not disappoint. The front of the house was tidy, the grass between the greenhouse and the trees was cleared away. I decided to buy a rotary attachment and ran into a problem. Spare parts cannot be obtained in our city, only on order.

: “I bought an auger snow blower for the fm 70 mower and regretted it. The power is only enough for light, freshly fallen snow. It doesn’t cope with thick and heavy layers. The model is not adapted for Russian winters.

Reviews say that the walk-behind mower is suitable for households where it is necessary to tidy up the local area or clear vegetation from fruit trees and berry fields. To harvest grass for feed and to clean small bushes, it is better to buy a walk-behind tractor with special equipment.

Technical features of the mower

Low-power motor mower MF-70

A low-power motor mower, despite its weak characteristics, will appeal to owners of private houses, as it will simplify the work. And you can mow the lawn in a short time.

We present the technical characteristics of the fm 70 mower to the reader in more detail in the form of a table:

You can buy equipment in specialized stores in any city. But before purchasing, ask if spare parts and additional attachments are available. In small towns it can be difficult to buy spare parts. The manufacturer offers a 3-year warranty for its motorcycles, but service centers are also not located in all regions. Each model comes with instructions for use and a warranty card. Without this documentation, it will not be possible to provide free service.

Where to buy and how much does a walk-behind mower cost?

Snow removal with a walk-behind tractor MF-70

The Czech model in Russia is sold with a slight markup. Moreover, they offer fm 70 via the Internet and directly in specialized salons. We offer the reader several proven companies in major Russian cities:

Cost and analogues

Prices for new models may vary depending on the pricing policy of a particular company. In most cases, the device will cost from 100 to 125 thousand rubles, which is much cheaper than some walk-behind tractors.

Used equipment will be a more economical option, since its cost does not exceed 45-75 thousand rubles. Its exact cost will depend on the configuration, as well as technical condition. In some cases, the product may require repair, but spare parts are widely available and inexpensive.

It is important to remember that all existing analogues of the product, for example, Rotex silver 5, are more expensive with identical functionality . This makes the MF 70 mower the most popular device in its category, allowing for significant savings.

Be sure to read: Cultivator for tractor MTZ 82

Technical features of the mower

A low-power motor mower, despite its weak characteristics, will appeal to owners of private houses, as it will simplify the work. And you can mow the lawn in a short time.

Low-power motor mower MF-70

We present the technical characteristics of the fm 70 mower to the reader in more detail in the form of a table:

You can buy equipment in specialized stores in any city. But before purchasing, ask if spare parts and additional attachments are available. In small towns it can be difficult to buy spare parts. The manufacturer offers a 3-year warranty for its motorcycles, but service centers are also not located in all regions. Each model comes with instructions for use and a warranty card. Without this documentation, it will not be possible to provide free service.

Share