On the quality of sowing work, the time spent on it, as well as the consumption of seed, fertilizers, etc. depends on the economic efficiency of the farm. Gaspardo products will allow you to perform this part of agricultural work with high performance, making a corresponding contribution to the overall efficiency of the entire farm.
Seeders Gaspardo
The history of the Gaspardo brand begins in 1836, when the production of sowing equipment began. Nowadays it is one of the most popular manufacturers of equipment for tillage, cultivation, sowing, spraying, fertilizing, etc.
Advantages and disadvantages
The equipment is distinguished by its ease of use, efficiency, reliability, and the ability to select the necessary modification by installing a different number of sowing sections, containers for fertilizers or devices for drip irrigation organizations. A variety of optional equipment is available. This brand is not often found on domestic fields, but deserves more attention.
Design features
Most models allow you to vary the row spacing, sowing with control of the depth of seed distribution; if the seeder consists of separate sections, depending on the size of the frame, it is possible to install different numbers of them.
The transmission of Gaspardo seeders uses a cardan drive instead of a chain drive, which increases reliability and reduces maintenance requirements for the unit. Depending on the soil characteristics, different press wheels can be used.
Quick reconfiguration of the seeder to work with a different type of seed reduces downtime and increases the efficiency of using equipment.
Gaspardo – GASPARDO MT8
The Gaspardo MT8 pneumatic seeder is a perfect high-performance equipment for all types of row crops. It is effective both on prepared soils, soils with minimal tillage, and in the presence of crop residues.
Gaspardo MT guarantees high performance both when sowing on prepared soil (traditional sowing) and on soil with minimal tillage.
High sowing speed, constant seed placement depth, and precise contour following ensure uniform germination of sown crops. Gaspardo makes sure that your equipment serves you for a long time.
The MT sowing sections are installed on independent parallelograms with powerful pressure springs, which, together with two rubber depth control wheels, guarantee a constant set sowing depth regardless of the conditions.
The design of the vacuum disc metering device uses a double regulator, which guarantees the highest sowing accuracy of both treated seeds and irregularly shaped seeds. The dosing unit is driven by a precise, lubrication- and maintenance-free cardan transmission.
The Gaspardo company's patented MiniMax design of volumetric dosers for dry mineral fertilizers ensures a precisely specified dosage ranging from 50 to 700 kg/ha without loss of accuracy. Dosage regulation is carried out quickly and conveniently by the centralized Speed Set system.
High reliability and ease of maintenance of the seeder is observed in every detail. These include sealed, maintenance-free Super Seal coulter bearings, self-lubricating parallelogram sinter bushings, and simple adjustment and adjustment elements. All this makes the Gaspardo MT seeder very easy to maintain and highly reliable in operation.
Characteristics and advantages of the Gaspardo MT :
1. Plastic seed hopper with a capacity of about 60 liters.
2. Parallelogram connection with double spring with adjustable pressure.
3. Adjustable pressure from 170kg to 300kg.
4. Rotary waste separator, used when there is a lot of crop residue.
5. Furrow disc with uneven profile: excellent cutting for existing crop residues; ease of penetration of the double grooved disc; provides the necessary preparation of crushed soil.
6. Hiller with a large-diameter double disc (diameter 420 mm, thickness 4 mm) with a sharpened edge, reinforced bearings and special super seal protection.
7. Rubber-coated depth wheels, in line with the hiller, with greater accuracy in maintaining the seeding depth.
8. Furrow closer, equipped with one pair of wide cast-iron wheels, which can be removed from the axles, with a V-shaped inclination relative to the vertical plane. Mechanical, manual adjustment 6 positions.
9. Round earth scraper for constant and complete cleaning of the tool. Depth adjustment via handle, up to a depth of 12 cm.
| Frame type/width | Solid, mounted / 5.8 m |
| Row/row spacing | 8 / 70 cm |
| Weight (empty), kg | In modification with the introduction of min. fertilizers - 1850 kg |
| Tractor PTO speed, rpm | 540 |
| Required tractor power, hp. (kW) | 100 (74) |
| Dosing disc set | 1 (standard for corn) |
| Cardan shaft under tractor PTO | 3/8 Z6-Z6 length 700 mm |
| Hydraulic marker | Eat |
| Seeding equipment | |
| Type of sowing devices | MT with double disc coulters |
| Grain container (on each sowing unit) | 60 l |
| Drive wheels of sowing units | 6.50 × 15 |
| Seeding depth control wheels | 400×115 mm |
| Widia coulter cleaners | Installed (optional) |
| Press wheels | Steel with rubber rim, V-mounted, 2-inch |
| Equipment for applying mineral fertilizers | |
| Bunker, l | 4 bins, 160 l each |
| Openers | Double disc |
| Means for monitoring and recording the operation of the seeder | |
| Monitor | MCV1200 (row seeding control with hectare counter) |
SoyuzBelAgro LLC Address: Saransk, st. Rabochaya, 155 Phones: +7, +7, +7, +7, +7. tel/fax, 33-33-24. 24 hours a day: +7-917-990-35-55. Delivery of equipment and spare parts to any region of Russia.
Equipment Sales Department E-Mail Spare Parts Sales Department E-Mail
Write your opinion:
Pneumatic precision seeders for vegetable crops
The Gaspardo company produces several series of pneumatic seeders for vegetable crops. Depending on the conditions, they can have a different number of sowing sections and are easily rebuilt when changing seeds of different crops.
SP
A series of universal precision seeders for any field, from stubble to plowed fields. The design of the seeder allows you to install a different number of sowing sections. Each of them has its own support wheel, which allows you to accurately repeat the profile of the surface and the contact of the opener with it. Replaceable seed discs simplify and speed up the transition from sowing one crop to another, which uses seeds of different sizes. Special spatulas prevent the seed from sticking together.
Technical characteristics of SP series gaspardo seeders:
| Number of rows | 4 | 5 | 6 | 8 | 12 |
| Row spacing, mm | 750 | 450 | |||
| Frame width, mm | 2500 | 3200 | 2500 | 4200 | 5800 |
| Seed hopper, l | 34 | ||||
| Fertilizer hopper, l | 2x160 | 2x160/2x280 | 2x280/4x160 | 4x160 | |
| Operating speed, km/h | 10 | ||||
| Tractor power, hp (kW) | 60(44) | 70(52) | 90(67) | 100(74) | |
| Weight, kg | 690 | 770 | 845/875 | 1085/1090 | 1226 |
The video shows the Gaspardo SP-8 seeder in operation:
M.T.
This series of seeders is designed to work on fully or minimally (min-Till) prepared fields. It is possible to adjust the seeding depth, as well as the amount of pressure on the ground. Based on the size of the frame, it is possible to use a different number of sowing sections.
Technical characteristics of Gaspardo MT series seeders:
| Number of rows | 4 | 5 | 6 | 7 | 8 | 12 |
| Row spacing, mm | 75 | 60 | 45/75 | 45 | ||
| Frame width, mm | 2800 | 3500 | 4400 | 3500/5800 | 5800 | |
| Seed hopper, l | 36 | |||||
| Fertilizer hopper, l | — | — | — | — | 4x160 | 4x200 |
| Operating speed, km/h | 10 | |||||
| Tractor power, hp (kW) | 70(52) | 80(59) | 90(67) | 90(67) | 80(59)/100(74) | 100(74) |
| Weight, kg | 760 | 870 | 990 | 1060 | 1150/1280 | 1900 |
Photo of the Gaspardo MT series seeder
MTR
This series is designed to work in harsh conditions and will allow seeding at high speeds. The seeder can be easily adjusted to suit different seed sizes.
Accuracy of sowing depth is ensured by balancing gauge wheels, which have different sizes for working on dry and wet soils. The possibility of spot application of fertilizers is provided.
Specifications:
| Number of rows | 12 | 16 | 18 | 24 |
| Row spacing, mm | 70-75 | 45/70 | 45 | |
| Frame width, mm | 9000 | 12000 | 8100/12600 | 12600 |
| Seed hopper, l | 60 | |||
| Fertilizer hopper, l | 4x280 | 4x950 | 4x280/4x950 | 4x950 |
| Tractor power, hp (kW) | 120(90) | 220(175) | 150(110)/220(175) | 220(175) |
| Weight, kg | 6360 | 6600 | 6950/7000 | 7900 |
Viedo review of the Gaspardo MTR seeder:
Regina
Regina vegetable seeders are designed for work on non-loosened fields. The seed furrow is opened with a toothed disc. This model uses No-Till direct seeding technology, which reduces the time required to complete all types of work, increases the soil's resistance to erosion and its fertility.
Technical characteristics of regina seeders:
| Number of rows | 4 | 6 | 7 | 8 | 9 |
| Row spacing, mm | 70-75 | 45 | 75 | 45 | |
| Frame width, mm | 3000 | 4300 | 3500 | 5800 | |
| Seed hopper, l | 60 | ||||
| Fertilizer hopper, l | 1000 | ||||
| PTO speed | 540/1000 (optional) | ||||
| Tractor power, hp (kW) | 70(52) | 90(67) | 80(59) | 100(74) | |
| Weight, kg | 1880 | 2220-2320 | 2440 | 3110 | 2950 |
photo of Regina seeder
Olimpia
Pneumatic seeder Olympia, a distinctive feature of which is a double seed distributor, which allows you to sow them with a distance between lines from 40 to 90 mm. If a press wheel is used, the minimum value is 70 mm. In each section, the sowing elements are arranged in a checkerboard pattern. Depending on the size of the frame used, from 3 to 12 sections can be installed.
The seeding disc used has a diameter of 220 mm and, due to the fact that it rotates at a lower speed when moving, high precision of seed distribution is ensured.
The fan, driven by the tractor PTO, creates a vacuum to fill the holes of the seed discs with seeds and blow them through after placing the seeds in the soil.
Specifications:
| Number of rows | 3 | 4 | 6 | 8 | 12 |
| Row spacing, mm | 22-26 | ||||
| Frame width, mm | 1900 | 2750 | 4200 | 4200 | 6000 |
| Seed hopper, l | 3x3.5 | 4x3.5 | 6x3.5 | 8x3.5 | 12x3.5 |
| PTO speed | 540 | 540 | 540 | 540 | 540 |
| Tractor power, hp (kW) | 70(52) | 80(59) | 80(59) | 100(74) | |
Photo of the Olympia seeder
Trailed sprayer 3200 liters, boom 24 meters GASPARDO
Pneumatic seeder Gaspardo MTR-8 – perfect high-performance equipment for all types of row crops. It is effective both on prepared soils, soils with minimal tillage, and in the presence of crop residues. Gaspardo MTR guarantees high performance both when sowing on prepared soil (traditional sowing) and on soil with minimal tillage.
Delivery to the farm and launch by the engineering and service department is FREE!!! Installment payment. 1 year warranty.
High sowing speed, constant seed placement depth, and precise contour following ensure uniform germination of sown crops. Gaspardo makes sure that your equipment serves you for a long time.
GASPARDO MTR sowing sections are installed on independent parallelograms with powerful pressure springs, which, together with two rubber depth control wheels, guarantee a constant set sowing depth regardless of conditions.
The design of the vacuum disc metering device uses a double regulator, which guarantees the highest sowing accuracy of both treated seeds and irregularly shaped seeds. The dosing unit is driven by a precise, lubrication- and maintenance-free cardan transmission.
The Gaspardo company's patented MiniMax design of volumetric dosers for dry mineral fertilizers ensures a precisely specified dosage ranging from 50 to 700 kg/ha without loss of accuracy. Dosage regulation is carried out quickly and conveniently by the centralized Speed Set system.
High reliability and ease of maintenance of the seeder is observed in every detail. These include sealed, maintenance-free Super Seal coulter bearings, self-lubricating parallelogram sinter bushings, and simple adjustment and adjustment elements. All this makes the Gaspardo MTR very easy to maintain and highly reliable in operation.
Characteristics and advantages of the Gaspardo MTR :
1. Plastic seed hopper with a capacity of about 60 liters.
2. Parallelogram connection with double spring with adjustable pressure.
3. Adjustable pressure from 170kg to 300kg.
4. Rotary waste separator, used when there is a lot of crop residue.
5. Furrow disc with uneven profile: excellent cutting for existing crop residues; ease of penetration of the double grooved disc; provides the necessary preparation of crushed soil.
6. Hiller with a large-diameter double disc (diameter 420 mm, thickness 4 mm) with a sharpened edge, reinforced bearings and special super seal protection.
7. Rubber-coated depth wheels, in line with the hiller, with greater accuracy in maintaining the seeding depth.
8. Furrow closer, equipped with one pair of wide cast-iron wheels, which can be removed from the axles, with a V-shaped inclination relative to the vertical plane. Mechanical, manual adjustment 6 positions.
9. Round earth scraper for constant and complete cleaning of the tool. Depth adjustment via handle, up to a depth of 12 cm.
It is possible to retrofit with a TURBO DISC instead of a stone thrower.
Specifications.
| Row/row spacing | 8 / 70 cm |
| Weight (empty), kg | In modification with the introduction of min. fertilizers - 1850 kg |
| Tractor PTO speed, rpm | 540 |
| Required tractor power, hp. (kW) | 100 (74) |
| Dosing disc set | 1 (standard for corn) |
| Cardan shaft under tractor PTO | 3/8 Z6-Z6 length 700 mm |
| Hydraulic marker | Eat |
| Seeding equipment | |
| Type of sowing devices | MTR with double disc coulters |
| Grain container (on each sowing unit) | 60 l |
| Drive wheels of sowing units | 6.50 × 15 |
| Seeding depth control wheels | 400×115 mm |
| Widia coulter cleaners | Installed (optional) |
| Press wheels | Steel with rubber rim, V-mounted, 2-inch |
| Equipment for applying mineral fertilizers | |
| Bunker, l | 4 bins, 160 l each |
| Openers | Double disc |
| Means for monitoring and recording the operation of the seeder | |
| Monitor | MCV-1200 (control of seeding in rows with a hectare counter), sound alarm for each seed tube. |
METRO frame
- trailed load-bearing chassis. The METRO frame is designed for combining several units in order to create a significantly larger working width, as well as to quantitatively reduce the consumption of traction equipment (tractors) during sowing. This hitch is suitable for use with both pneumatic and mechanical seeders.
Standard equipment includes:
- 2 universal three-point hitches
- turbine from tractor PTO
- piping system
- track eradicators
- hydraulically foldable markers.
The universal frame makes it possible to aggregate both row-crop and grain seeders with it.
Price (including VAT-20
%):
43 4 00 EURO
MTZ-82 tractor linkage reinforcement kit
The kit is designed to strengthen and increase the lifting force of the three-point hitch of the MTZ-82 tractor.
Ensures tractor stability during field work and transportation of GASPARDO MT-8 and GASPARDO MTR-8 with fertilizers.
ATTENTION! The equipment is intended for its intended use only. Any other use other than that described in these instructions will damage it and pose a direct danger to the user.
ATTENTION! Hydraulic safety: 1) When connecting hydraulic pipes to the tractor hydraulic system, check that the tractor hydraulic systems are not under pressure. 2) Hydraulic systems are under high pressure; When searching for leaks, to avoid accidents, use auxiliary tools specially designed for this purpose. The pressure must not exceed that specified for hydraulic equipment.
Seeders for grain crops
Models are designed for sowing grain, alfalfa, rapeseed, soybeans and other crops, including both mechanical and pneumatic seeders.
Mechanical
Simplicity, reliability, compactness, and efficiency are the characteristic features of the Nina series of mechanical seeders, designed for sowing grain, soybeans, corn and other forage crops in well-prepared fields. The standard equipment includes a harrow for seed placement and a row marker.
Technical characteristics of Nina seeders are given in the table:
| Frame width, mm | 2500 | 3000 | 4000 |
| Max. number of rows with anchor coulter | 21 | 29 | 33 |
| Max. number of rows with disc coulter | 21 | 25 | 31 |
| Max. number of rows with COREX disc | 21 | 25 | 33 |
| Row spacing, mm | 100-130 | ||
| Seed hopper, l | 401 | 481 | 641 |
| Tractor power, hp (kW) | 60(44) | 70(52) | 90(67) |
| Weight, kg | 479 | 524 | 1119 |
Video review of the Gaspardo Nina seeder:
The Mega series is intended for sowing in minimally tilled soil (min-till), aimed at use in large farms.
The design provides for the application of fertilizers when sowing large areas. Technical characteristics of Mega seeders are given in the table:
| Frame width, mm | 6000 | 12000 |
| Max. number of rows | 44 | 88 |
| Max. number of rows with disc coulter | 21 | 25 |
| Max. number of rows with COREX disc | 21 | 25 |
| Row spacing, mm | 136 | |
| Seed hopper, l | 940 | 180 |
| Fertilizer hopper, l | 900 | 1800 |
| Tractor power, hp (kW) | 120(88) | 220(165) |
| Weight, kg | 2150 | 9200 |
Photo of the Mega seeder
The S(SC) MARIA series of mechanical seeders is designed to work on minimally tilled soils (min-Till), including those containing a higher amount of plant residues.
Depending on the type of soil, different tips can be used:
- R – for particularly heterogeneous hard soils. The pressure-regulating spring ensures safe and high-quality seeding.
- L – designed for use on rough, hard, rocky soils.
- DD (double disc) - used on soils with a lot of plant residues. The optional rubber wheel improves soil coverage of the seeds.
The SC modification is equipped with a device for applying fertilizers.
Technical characteristics of MARIA seeders are given in the table:
| Frame width, mm | 2500 | 3000 | 3500 | 4000 |
| Modification | S/SC | |||
| Number of rows | 17-18 | 22-25 | 25-28 | 28-32 |
| Row spacing, mm | 147-138 | 136-120 | 140-125 | 143-125 |
| Seed hopper, l | 610/390 | 755/485 | 1275/815 | 1490/955 |
| Fertilizer hopper, l | -/220 | -/270 | -/460 | -/535 |
| Tractor power, hp (kW) | 70(52) | 90(67) | 100(74) | 120(90) |
| Weight, kg | 695/735 | 850/310 | 1050/1180 | 1250/1290 |
Cereal seeder Maria 400
Pneumatic
Technical characteristics of Gaspardo pneumatic seeders for grain:
| Model | Pina | Pinta | Primavera | Scatenata | Balena |
| Frame width, mm | 4000-4500 | 4000-6000 | 6000 | 12000 | |
| Number of rows | 29-32 | 29-48 | 32-48 | 40-48 | 48 |
| Row spacing, mm | 125-155 | 125-157 | 125-150 | 125-150 | 125 |
| Seed hopper, l | 800 | 1000-1500 | 1500 | 1500-3000 | 8660 |
| Fertilizer hopper, l | — | — | — | 0-1500 | 4340 |
| Tractor power, hp (kW) | 70(52)-80(59) | 60(44)-120(90) | 180(132) | 100(74) | 375(276) |
| Weight, kg | 90-1380 | 1080-2000 | 1700-2280 | 2750 | 12000 |
Seeder Pinta
Row crops
Row-crop seeders are used on unprepared or minimally prepared fields. This product group includes both mechanical and pneumatic series of seeders.
| Model | Diretta | DP Pronta | Gigante | Elefante |
| Frame width, mm | 3000-4000 | 12000 | ||
| Number of rows | 17 | 17-22 | 18 | 66 |
| Row spacing, mm | 156-180 | 180 | ||
| Seed hopper, l | 1260-2880 | 1575 | 1575-2080 | 8000 |
| Fertilizer hopper, l | 830-1140 | 815 | 815-1100 | 4000 |
| Tractor power, hp (kW) | 120 (90)-150 (110) | 150 (110) | 130(196)-160(118) | 380 (279) |
| Weight, kg | 3900-4450 | 3700-4030 | 3750-4450 | 11500-1300 |
Diretta row crop seeder
Seeder Maschio-Gaspardo MT 8 rows 70 cm with fertilizers (disc coulter, MTR sowing unit)
The MT mounted pneumatic precision seed drill with fertilizer application is designed for sowing corn, sunflower, beets and other crops (with replaceable discs).
Suitable for working in difficult conditions and minimally prepared soil.
Advantages
1. The sowing unit is designed for sowing in difficult conditions at high operating speeds. The parallel cast beam is made of high-strength steel. The design allows it to withstand large torsional and bending forces and shocks that occur under difficult working conditions.
2. Pneumatic control of the working position of the machine. Adjustable springs make it possible to adjust the working force on the soil depending on its type. Pressure force adjustment range from 115 to 140 kg.
3. large double cultivator discs with a diameter of 420 mm, a thickness of 4 mm guarantee long-term preservation of performance indicators, long service life due to the restoration of the cutting edges of the discs by removing the spacer washers from the assembly of the fastening unit.
4. The adjustable clod breaker discards the clods and topsoil before cutting by the front-mounted independent cultivator, allowing it to cut the soil and create excellent turning conditions.
5. Innovative drive shaft drive. Forget about chains, grease and bearings clogged with dust. Don't be afraid to work in fields with a lot of crop residue. Stems and roots will not damage the car.
7. Super scraper! The scrapers are equipped with a wear-resistant profile made of tungsten carbide and designed for non-stop operation.
8. Super compacted hubs. Bearings with two rows of balls with larger than nominal dimensions and guaranteeing reliable operation in the most adverse conditions. Long service life is ensured by a triple seal and the hub is dustproof and ideal for use in wet conditions.
9. Gauge wheels compact the soil immediately after opening the furrow. Most of the compaction pressure is distributed to the sides, and the top soil towards the center of the furrow is lightly compacted to allow the rear wheels to pass to close the furrow.
10. Absolute precision of sowing. The vacuum system gently pulls out the seeds and holds them in the holes of the seed plate, regardless of their size or shape. Seeding tube: The special tube design prevents the seeds from bouncing off when dropped. The clamp alleviates potential seed tube contact with opening disc harrows, which can cause vibration and wear. The absence of vibration in the seed tube ensures more consistent seed placement. Seed Braking System: When seeds enter the narrow V-shaped furrowers, they stop instantly, keeping them evenly spaced. The seed falling speed decreases from 10 to 0 km/h in less than 1/12 of a second.
12. Seed separator. The operation of the twin seed separator is easily checked through the rear inspection door and can be adjusted quickly and easily. Seed separation is carried out both on the inner and outer sides of the slab opening, which effectively avoids sowing twins.
13. Self-lubricating, sintered bearings, automatically discharging oil contaminants, resulting in no maintenance required.
14. Can be mounted with tractors of traction class 1.4 (71 - 100 hp), such as Belarus (MTZ) 82.1, provided that the REAR HITCH REINFORCEMENT KIT is used.
15. The MINIMAX volumetric distributor is easily adjustable and allows you to distribute fertilizers with different dosages, without losing distribution accuracy: 50-700 kg/hectare. Centralized, convenient, quick setup - SPEEDY SET! The SOFT FEEDER volumetric distributor continuously dispenses the product without causing damage to the grain. An element made of silicone rubber and with a plastic body guarantees durability against corrosion.
Specifications
Total information
| Aggregation type | mounted |
| Working width, m | 6 |
| Opener type | disk |
| Depth of seed placement from, cm | 0,5 |
| Seed hopper capacity, l | 36 |
| Fertilizer bunker capacity, l | 160×4 |
| Required tractor power, hp | 100 |
| Operating speed, km/h | 10 |
| Fertilizer seeding rate, g/ha from | 30 |
| Seeder type | row crop |
| Weight, kg | 1280 |
| Number of rows | 8 |
| Depth of seed placement up to, cm | 10 |
| Fertilizer seeding rate, g/ha up to | 643 |
| Row spacing, cm | 70 |
The mounted pneumatic precision seed drill MT with fertilizer application is designed for sowing corn, sunflower, beets and other crops (with replaceable discs).
Equipped with a modern MTR seeding device, specially designed for working in difficult conditions and minimally prepared soil. The MT seeder best suits the goals of modern agriculture, giving maximum productivity at minimum cost. Thanks to its technical characteristics, it uses only one rotating element and provides high performance, both on prepared soil (traditional sowing), and on soil with minimal tillage, or in the presence of plant residues. Distinctive features are a higher travel speed than traditional machines and constant control of the seeding depth using a pair of guide wheels, which contributes to absolute uniformity of plant distribution. Features: 1. Double seed regulator selects even processed seeds or irregularly shaped seeds. The performance of the seeder provides the highest sowing accuracy of any machine on the market. 2. Adjustment of sowing depth. 3. Cardan: precise transmission, reliable, does not require lubrication and maintenance. 4. Self-lubricating welded bushings, forcefully releasing oil droplets, lubricating the swivel joint. 5. Seed pressure wheel made of steel with a carbide scraper for optimal seed distribution. Strengths: 1. Pressure and/or relief spring 2. Quick release 3. Plastic funnel - 36 l. 4. Adjustment of the depth of precise sowing without jerking 5. Steel seed regulator 6. Rear press wheel (rubber “V”-shaped 2”,) 7. Independent depth wheels with balancer 8. Distribution housing made entirely of aluminum 9. Disc-furrow maker? 420 with sealed bearing with double ring of spheres 10. Adjustable lump divider 11. Reliable driveline with quick release and sound safety: maintenance-free 12. Self-lubricating brazed bushings: maintenance-free 13. Quick opening for easy disc replacement, low-pressure seal friction Possible to be mounted with tractors of traction class 1.4-2 (71 - 100 hp) provided that the rear linkage reinforcement kit is used.
