Gearbox of the middle axle KAMAZ-6520
If it breaks, carefully inspect the case; if damage is found, we recommend that you refuse repairs and buy a ready-made one, because This is a cast part and is difficult to restore. Replacing the gearbox is better than repairing it. We will exchange your broken gearbox for a new one. We will professionally repair your gearbox.
The gearbox we have restored is made, perhaps, by the best specialist in Nab. Chelny, from whom many local KAMAZ owners have their gearboxes repaired. A thoroughly tested old body/crankcase is used, all fillings are replaced with new factory parts purchased at wholesale prices. It will be difficult for you to repair it as efficiently and inexpensively as we do.
The cost of delivery of gearbox 6520 to Nab. Chelny from Moscow or Krasnodar = 1-3 thousand rubles.
Description
The KAMAZ 6520-2502011 middle axle gearbox is designed to receive torque from the engine crankshaft and, having reduced it, transmit it further to the transmission units (center differential, which distributes torque to the drive wheels in a certain proportion).
It differs in appearance from older models and is much more expensive.
Final drive configurations 6520-2502011
Designation | Gear teeth | Gear ratio | Applicability |
6520-2402011-10 | 35/21 | 5.11 | dump chassis, traction |
6520-2402011-20 | 31/15 | 6.58 | tipper chassis, high-speed |
The gearboxes of all axles on a truck must have the same gear ratio - installing gearboxes with different gear ratios will inevitably lead to breakdown.
Notes on installing the KAMAZ gearbox
1. Before installation, you must thoroughly clean the axle housing (“stocking”). 2. Make sure that the axle crankcase breather is working properly to avoid squeezing out the seals. 3. It is necessary to replace the oil with a new one recommended by the manufacturer. 4. It is necessary to use the original (thick) paranitic gasket between the axle stocking and the gear housing.
Exchange old for new - Trade-in
You can hand over your old unit to us as a replacement for a new or overhauled one. The cost for a faulty transmission is determined upon the fact of the defect - within 2-5 days.
Trade-in will help you quickly and profitably restore the performance of your KAMAZ vehicle.
Complete set of the main transmission (reducer) of the intermediate axle assembly 6520-2502011-10
Number | Name |
6520-2502015 | Middle axle gear housing |
6520-2502021-10 | Bevel drive gear |
6520-2502036 | Drive flange for middle axle |
6520-2502050 | Bearing cover assembly |
6520-2503011-10 | Axle differential average |
6520-2506010 | Interaxle differential of the middle axle |
5320-2509024 | Locking mechanism housing cover (welding) |
6520-2402096 | Adjusting gasket |
6520-2402097 | Adjusting gasket |
6520-2402098 | Adjusting gasket |
6520-2402099 | Adjusting gasket |
6520-2402100 | Adjusting gasket |
53205-2403040 | Bearing nut |
6520-2403043 | Bearing nut stopper |
6520-2502024 | Drive shaft of the middle bridge |
6520-2502052 | Adjusting gasket |
6520-2502101 | Crankcase gasket |
6520-2502110 | Drive gear of the middle axle drive |
6520-2502115 | Middle axle gear housing gasket |
6520-2502120 | Driven cylindrical gear of the middle axle drive |
6520-2502142 | Retaining ring |
6520-2502175 | Washer |
6520-2402269 | Bearing nut |
6520-2506126 | Rear axle drive gear |
5320-2509017 | Diaphragm of the center differential locking mechanism |
5320-2509019 | Locking mechanism cup |
6520-2509020 | Locking mechanism rod |
5320-2509023 | Return spring |
5320-2509025 | Locking mechanism cup cover |
5320-2509049 | Lock fork |
5320-2509053 | Center differential lock clutch |
5320-2509065 | Pressure spring |
1042924K1M | Radial roller bearing with short cylindrical rollers |
6-7217A | Single row tapered roller bearing |
6-7516A1 | Single row tapered roller bearing GOST 520-89 |
27313A | Single row tapered roller bearing |
42206AKM | Radial roller bearing with short cylindrical rollers |
1/09020/21 | Bolt M6-6gх12 |
1/55407/21 | Bolt M12x1.25-6gx45 |
1/42376/21 | Bolt M8-6gx12 |
1/42747/31 | Self-locking bolt M12x1.25-6gx40 |
1/07910/11 | Nut M10x1.25-6N |
1/05170/77 | Spring washer 12 |
1/02785/50 | Adjusting gasket 16x22x0.5 |
1/02813/80 | Sealing gasket 16x22x1 |
853350 | Set screw M10x1.25-6gx25 |
862806 | Ring B 62 GOST 13943-68 |
862810 | Resistant ring |
262515 | Plug KG 1/4″ OST 37.001.178-82 |
VK403B | Reversing light switch |
Why should you buy from us?
We provide a clear guarantee of the quality of spare parts from reliable manufacturers |
Large selection, competitive prices, discount system |
Prompt delivery throughout Russia |
Make an order
Call the phone number indicated in the header of the site. Information will be required: car model, year of manufacture, unit model, Euro class. |
Details can be sent using the “Request an offer” button or by email |
The sale is formalized by signing a purchase and sale agreement. Prepayment is required. |
Delivery is carried out by transport carriers. At the delivery point you will be able to inspect and check the goods |
Guarantee
Manufacturer's warranty is provided. The warranty remains valid in the absence of mechanical damage and signs of abnormal use. The installation of units and spare parts must be carried out by a specialized service. |
Returns and exchanges
We provide the opportunity to return/exchange spare parts under the following conditions: — No more than 14 days have passed from the date of receipt; — The integrity of the packaging is not compromised; — The part must be in its original presentation and must have no traces of installation or use; — There are no returns for custom driveshafts or non-standard units. |
KamAZ 44108 spare parts catalog online
Are you interested in KamAZ 44108 spare parts catalog online? Call us with a request “KAMAZ 44108 spare parts catalog online”, our experts will explain to you the price, payment methods, delivery to your destination. During the operation of KamAZ tractors, transmission damage, etc. may occur. The car does not last forever, the postulates of physics damage the auto components of the tractor. The driver is thinking, “Which store is it possible to purchase KamAZ auto components?” Our advice is to purchase units only from specialists who have knowledge in the automotive world, who know the part numbers for different classes of KamAZ trucks, and can successfully distinguish between parts relative to the supplier. Then, as soon as the driver finds the store, another dilemma arises: “which KAMAZ spare parts to buy,” because... The sources of origin of KAMAZ parts are varied.
KamAZ 44108 spare parts catalog online - click on the banner above to go
KAMAZ spare parts are divided into groups: - Original KamAZ spare parts with the horse trademark and the word KAMAZ on the wrapper, produced by KAMAZ PJSC and official related factories. A label with an article and digital protection is glued to the wrapping polyethylene. These KAMAZ auto parts are, without a doubt, of high quality, comply with technical documentation, the entire technological chain is carried out during the manufacturing process, and no expense is spared at the plant when improving quality. In total, the result is a reliable product, but with a cost that is 1.6–1.9 times more expensive than non-original auto parts. — Refurbished spare parts. The car market is flooded with sales of reanimated units assembled from used car parts. Refurbished car parts are also divided into 2 types: 1) there are repairmen who, when updating a transmission, for example, are tasked with giving it a great appearance and selling it quickly, but do not think at all about the internal parts, and sometimes install terribly worn-out used components. You need to beware of these, for the most part these speculators sell components based on publications in advertising brochures for cash without specified registered agreements. 2) Let’s add that there are repairmen who restore gearboxes, by the way, in an honest manner, installing only high-quality, low-worn “used” spare parts together with new original spare parts, such spare parts can last a long time, you just need to buy them only on advice your friends. — Non-original auto components are those auto components that are not sent to the KAMAZ PJSC conveyor belt, without the trade designation “KAMAZ”, due to the fact that the manufacturer did not win the tender to provide the conveyor due to any corruption reasons (“did not share”, or “interdependent” organizations control these positions”, etc.) and the manufacturer has to be content only with the secondary market, or the quality does not reach the “wants” of KamAZ STC engineers due to the presence of some insignificant dimensional discrepancies, etc. Regarding auto components, we recommend buying non-original auto parts if the supplier guarantees work for six months, since such spare parts are 35-45% lower in price than original auto components. — Garage parts, naturally, are products that are produced in a handicraft manner without complying with all the necessary technological requirements. Usually the product material does not match the values. The shelf life of such products may be short. It is necessary to buy on the recommendations of professional professionals who have had the opportunity to test them.
We will deliver to any point in the Russian Federation: Aktobe, Polotsk, Kirensk, Syasstroy, Novozybkov, Dubna, Chernogolovka, Belebey, Armyansk, Vorkuta, Efremov, Livny, Lukhovitsy, Naryan-Mar, Chekhov, Lisakovsk, Ishimbay, Nadym, Megion, Semikarakorsk, Tver, Ekibastuz, Tchaikovsky, Zabaikalsk, Kherson, Naryan-Mar, Baksan, Miory, Bryansk, Kremenchug, Polevskoy, Kachkanar, Tarko-Sale, Slavyansk, Yartsevo, Bryansk, Ekibastuz, Konotop, Bishkek, Simferopol, Artyom, Mednogorsk, Novogrudok, Kirzhach, Volgograd, Sertolovo, Aksai, Sarapul, Osa, Berdsk, Taldykorgan, Balashikha, Tuymazy, Sumy, Voznesensk, Petushki, Priobye, Shchelkovo, Nazran, Perm, Pyt-Yakh, Baranchinsky, Donetsk, Nazran, Sertolovo, Ivanteevka, Azov, Severobaikalsk, Pushchino, Kodinsk, Stroitel, Pavlovo, Bereznikovsky, Kramatorsk, Kirovsk, We recommend that you look at the prices for auto parts on our website: Steering end housing, left. Goal. 3414061-5320, Cover MOD 2506027-5320, Turbocharger gasket 1118245.7405, Rod with conical RMS (ROSTAR) 2919012-251, Bolt M20x100, Front spring lug pin 2902478-43114, ZF Gearbox bearing ZF M GM 4277 0750117677, Settling glass (PL 270, PL 420), Transfer case intermediate shaft 1802085-4310, Head hub. 43114 3103015-43114, Protective casing URAL5, Rear light GAZelle (OSVAR) 3716.171-01 Ring 120 1601120.14, Cabin insulation (up to -60 degrees) 3914010-5320, KM Set of gaskets for the engine (complete) 4 955229/ 4955230, Pre-start fuel pump (ASM Nab. Chelny) 1141010.37, Rocker bracket 1703284-61.154, Front hub drive flange 2304090-4310, Compressor cylinder head 2-cyl. 3509039-5320, Muffler EURO115, Winch cable hook 4504035-4310, Driver's pneumatic seat (TIS Yelabuga) 6800-40L SIT, Rear gearbox flange 036 2402036-5320, Headlight bumper 65115 (fiberglass) RIAT 2803 020-65115, Hydraulic hose 810cm . (Gidrosila) d 20s36, PZhD hose d-32, Body mounting axle (headed), Rear caliper 5460 3502025-5460, Side repeater assembly UP-101 (Rudensk) 112.01.12 112.01.12 EURO-2 injection pump drive (with plates) 1111050.7406, etc.
KamAZ spare parts office
***
Spare parts KamAZ warehouse
***
Spare parts KamAZ warehouse
Spare parts for KamAZ 55111 prices