Excavator ET-16, ET-16, spare parts ET-16
| ||||||||||||||||||||||
ET-16 is a multi-purpose single-bucket excavator on an extended-extended crawler track. First of all, ET-16 is intended for such types of work as digging pits, quarries and trenches in soils of categories I-IV, as well as for loading and unloading various bulk materials - frozen rock, loosened rock, etc.
The excavator is adapted to work on surfaces with low bearing capacity. These primarily include swampy areas. This is achieved through track tracks with a width of 1000 mm. In this case, the maximum specific pressure on the ground does not exceed 0.19 kg/cm2.
As in the case of the junior 14th line, the EK-16 and ET-16 rotary platforms are unified. The excavator can be additionally equipped with imported engines and hydraulic equipment from Bosch-Rexroth.
The short crawler track allows you to transport the excavator to the work site without any problems. The designers deliberately reduced the radius of the turning part of the machine, which made this model maneuverable when working in cramped conditions.
Replaceable handles for 2200 mm, 2800 mm, 3400 mm allow the use of buckets with a volume of 0.4 m3, 0.5 m3, 0.65 m3, respectively.
Spare parts and repairs ET-16
If you have any problems with the ET-16 excavator, we advise you to immediately contact the Tvermashkomplekt company. Firstly, we have been working in this area for many years and have sufficient experience to carry out repair work at the highest level. And secondly, we are a direct partner of the manufacturer and therefore have the necessary spare parts at the lowest prices.
For the ET-16 brand we can offer the following types of replacement equipment:
- ripper 314-03-40.17.300
- grab GK-221
- hydraulic hammer MG-300
The following versions of the ET-16 excavator are possible:
| Excavator model | Weight, t | Bucket volume, m3 | Digging depth, m | Engine make | Description |
| Excavator ET-14-20 | 14,8 | 0,65 | 4,89 | D-245 | OPU 1250, hands. L=1900mm, hydraulics “PSM”, heater “Gidronik” |
| Excavator ET-14-30 | 14,8 | 0,65 | 4,89 | D-245 | OPU 1250, hands. L=1900mm, hydraulic pump “Bosch-Rexroth”, heater “Gidronik” |
| Excavator ET-14-40 | 14,8 | 0,65 | 4,89 | Perkins 1104C-44 | OPU 1250, hands. L=1900mm, "Bosch-Rexroth" hydraulic pump, "Gidronik" heater |
www.tvmk.ru
Digging parameters of the TVEX ET 16 excavator
| Handle, m | 1,9 | 2,2 | 2,8 | 3,4 |
| Digging radius, m | 8,2 | 8,4 | 9,0 | 9,6 |
| Digging radius at parking level, m | 8 | 8,2 | 8,76 | 9,3 |
| Kinematic digging depth, m | 5,1 | 5,4 | 6,0 | 6,6 |
| Unloading height, m | 5,52 | 5,70 | 6,05 | 6,35 |
| Bucket rotation angle (deg.) | 173 | 173 | 173 | 173 |
| Maximum bucket capacity (according to SAE), m3 | 0,65 | 0,5 | 0,4 | 0,32 |
| 1 | handle 1.9 m |
| 2 | handle 2.2 m |
| 3 | handle 2.8 m |
| 4 | handle 3.4 m |
LLC “Experimental Mechanical Plant”
Order
Single-bucket hydraulic crawler excavators ET-14, ET-16, ET-18, ET-25, ET-26.
Crawler hydraulic excavator ET-14
Designed for the development of pits, trenches, quarries and wells in soils of categories I-IV, loading and unloading of bulk materials, loosened rocks and frozen soils (with pieces no more than 200 mm in size), as well as for other work in various branches of industry, road construction -transport and public utilities. The short track allows the ET-14 excavator to be transported on a standard trailer, with the track mounted perpendicular to the trailer. The reduced radius of the turntable allows the ET-14 excavator to work in cramped conditions.
The ET-14 excavator can be equipped with various types of replaceable working equipment: replaceable handles with a length of 2200, 2800 and 3400 mm; buckets V= 0.65, 0.5 and 0.4 m3; hydraulic hammer MG-300; grab GK-221; ripper.
Crawler hydraulic excavator ET-16
Designed for the development of pits, trenches, quarries in soils of categories I-IV, loading and unloading of bulk materials, loosened rocks and frozen soils (with pieces no more than 200 mm in size), as well as for other work in industrial, urban, rural, transport and reclamation construction. The ET-16 excavator is designed on a widened-extended caterpillar track for working on soils with low bearing capacity, for example, for reclamation and peat work in swampy areas. The width of the excavator caterpillar tracks is 1000 mm. Specific ground pressure 0.19 kg/cm2.
The ET-16 excavator can be equipped with various types of replaceable working equipment: replaceable handles with a length of 2200, 2800 and 3400 mm; buckets with a capacity of 0.65, 0.5 and 0.4 m3; hydraulic hammer MG-300, grab GK-221, ripper 314-03-40.17.300
Crawler hydraulic excavator ET-18
Designed for work on soils with low bearing capacity, for example for reclamation and peat work in swampy areas. The ET-18 crawler hydraulic excavator is an excavator of the 4th size group, has higher digging parameters compared to the ET-14 excavator and an increased bucket capacity of up to 1 m3. The rotary platform is unified with the EK-18 excavator. The ET-18 excavator can be equipped with various types of replaceable working equipment: replaceable handles with a length of 2800 and 3400 mm; buckets with a capacity of 0.77 and 0.65 m3; hydraulic hammer MG-300; grab GK-221; ripper 225-00-40.17.400; five-jaw grabs for bulk and non-bulk cargo; log grabber 313-00-40.12.00 with rotator.
Crawler hydraulic excavator ET-25
Used for work requiring high machine mobility. Crawler hydraulic excavator ET-25 – 4 size groups, bucket capacity 1.25 m3. The excavator uses centralized lubrication of working equipment and a pre-starting liquid heater made in Germany, which ensures engine starting at low temperatures and efficient heating in the cabin. The ET-25 crawler hydraulic excavator has a wide range of replaceable working equipment: handle L= 3400 mm and bucket V=0.77m3; hydraulic shears NG-1622; concrete breakers IG-811, IG-8214; ripper 225-00-40.17.400; grab GK-221 with rotator 318-00-40.31.000 and extension 313-00-40.300.900; grab GP-554 (GPS-555) with a capacity =0.6 m3, with a rotator 318-00-40.31.000; log grabber 313-00-40.12.000 with rotator 318-00-40.31.000.
Crawler hydraulic excavator ET-26 (KiT-26)
Designed for the development of pits, trenches, quarries in soils of categories I-IV, loading and unloading of bulk materials, loosened rocks and frozen soils (with pieces no more than 200 mm in size), as well as other work in industrial, urban, rural, transport and reclamation construction.
The excavator uses a multi-support design of a crawler carriage with rigid installation of support elements with a tension mechanism for the caterpillar belt. For high reliability of operation in any conditions, the excavator is equipped with a hydraulic pump and BOSH-REXROTH travel and rotation hydraulic motors. Centralized lubrication of working equipment was used. The ET-26 excavator is equipped with a comfortable cabin of modern design. The cabin provides good visibility for the operator, has high vibration resistance, sound insulation and a heating installation. The cab is equipped with a sprung, adjustable seat that protects the operator from vibration. To automatically monitor the current state and warn about maximum deviations of operating parameters, an electronic control panel is installed in the excavator cabin.
The excavator is equipped with a four-stroke six-cylinder diesel engine YaMZ-236M2. To quickly start the engine at subzero ambient temperatures, a pre-heater is installed on the excavator. The excavator has a large set of replaceable working equipment.
Excavators of the ET series can be equipped, at the customer’s request, with a Perkins engine, a hydraulic pump and Bosch-Rexroth hydraulic motors.
| Specifications | |||||
| Options | ET-14 | ET-16 | ET-18 | ET-25 | ET-26 (KiT-26) |
| Weight, kg | 148000 | 16000 | 18500 | 26500 | 37 000 |
| Bucket capacity, m3 | 0.65 (0.31, 0.4, 0.5) | 0.65 (0.32, 0.4, 0.5) | 1.0 (0.65, 0.77) | 1.25 (0.77, 1.4) | 1.11 (0.78, 0.98, 1.42) |
| Engine | D-245/ Perkins 1104S-44 TA | D-245/ Perkins 1104S-44-TA | D-245/ Perkins 1104S-44-TA | YaMZ-236G5/ Perkins 1106C-E60TA | YaMZ 236M2 |
| Engine power, kW | 77.5/90.5 | 77.5/90.5 | 77.5/90.5 | 110/125 | 132 |
| Cycle duration, s | 16 | 16.5 | 18.5 | 22 | 16-18 |
| Pumping unit capacity, l/min | 248 | 258 | 248 | – | 2x210 |
| Turntable rotation speed, rpm | 9 | 9 | 6 | – | 11 |
| Max. effort when digging with a bucket, kg | 7500 | 8000 | 9600 | – | 18600 |
| Max. force when digging with the handle, kg | 7000 | 7100 | 8100 | – | 11800 |
| Traction force, kg | 10500 | 12300 | 12400 | – | 21000 |
| Specific ground pressure, kg/cm2 | 0.39 | 0.19 | 0.43 | 0.55 | 0.55 |
| Travel speed, km/h | 2.4 | 2.4 | 2.4 | 2.3 | 1.8-3.8 |
| Max. digging (grabbing) radius, m | 8.2 | 8.2 | 9.1 | 9.8 | 10.1 |
| Max. digging depth, m | 5.2 | 5.1 | 6.0 | 6.48 | 6.52 |
| Max. unloading height, m | 5.42 | 5.52 | 6.0 | 7.0 | 6.52 |
| Angle of rotation of the bucket, degrees. | 173 | 173 | 177 | 177 | – |
| Dimensions, m | 8.2x2.75x2.99 | 8.2x3.15x3.07 | 9.4x2.75x3.18 | 9.9x3.0x3.45 | 10.35x3.0x3.34 |
omz.ru
Excavator ChSDM ET-16 technical characteristics
The ChSDM ET-16 excavator is a crawler excavator, which was manufactured at Chelyabinsk Road Construction Machines CJSC.
Excavator ChSDM ET-16 technical
characteristics:
- Engine: model MMZ D-245S;
- power 77 kW;
- volume 4.75 l;
- diesel fuel consumption 220 g/kW h;
- number of cylinders 4;
- speed 2200 rpm.
- track width 1000 mm;
- ;
- hydraulic system 330 l;
This equipment has the following dimensions:
- The width of the turntable is 2490 mm.
- The width of the equipment is 3150 mm.
- The height of the equipment in the cabin is 2903 mm.
- The radius of rotation of the tail part of the turntable is 2300 mm.
- Ground clearance under counterweight 1075 mm.
- Characteristics with a handle length of 1900 mm: length 8200 mm;
- height of equipment with boom 3010 mm.
- length 8140 mm;
- length 7900 mm;
Excavator ChSDM ET-16 technical characteristics of the equipment used:
- The digging force of the bucket is 8100 kgf.
- Boom length 4700 mm.
- The bucket rotation angle is 173 degrees.
- Characteristics with a handle length of 2800 mm: bucket capacity 0.4 m3;
- shipping height 6080 mm;
- cutting height 8390 mm;
- digging depth 5870 mm;
- digging radius at the parking level is 8700 mm;
- digging force with the handle is 5600 kgf.
- bucket capacity 0.5 m3;
- bucket capacity 0.65 m3;
The crawler excavator ChSDM ET-16 is used when developing trenches, pits, quarries on soil from the first to fourth categories, as well as when carrying out loading and unloading operations with bulk materials loosened by frozen soil, rocks, the size of the pieces does not exceed 200 mm. An excavator of this model is indispensable in conditions of transport, industrial, urban, rural, and land reclamation construction.
The equipment of this model can be equipped with the following equipment:
- hydraulic hammer;
- ripper;
- digging grab.
The crawler excavator ChSDM ET-16 has the following advantages:
- high cross-country ability;
- long period of operation;
- sustainability;
- high performance;
- multifunctionality;
- the presence of a single cabin with a large glass area, which provides wide visibility of the working area, minimal noise level, dust protection, safety and comfort in the workplace;
- easy access to units and equipment components, ensuring ease of maintenance;
- availability of compartments for storing a first aid kit, fire extinguisher and other essentials;
- comfortable arrangement of instruments for monitoring and control of equipment;
- the presence of a powerful, economical, durable diesel engine that meets environmental standards.
industrika.ru
Excavator TVEX ET-16 technical characteristics
industry » Special equipment » Excavators » TVEXThe TVEX ET-16 excavator is a crawler excavator manufactured by Tverskoy Excavator OJSC.
Excavator TVEX ET-16 technical characteristics:
- Engine: model 1104C-44TA;
- manufacturer Perkins;
- power 89.2 kW;
- fuel type - diesel;
- speed 2200 rpm.
- The machine's ground pressure is 0.19 kg/cm2.
- Length/height/width - 8200 mm/3070 mm/3150 mm.
- Operating weight 16000 kg.
- Electrical system voltage 12 V.
- Hydraulic system pressure 28 MPa.
- Travel speed 2.4 km/h.
- Characteristics with a handle whose length is 1900 mm: bucket rotation 173 degrees;
- nominal bucket volume 0.65 m3;
- shipping height 5520 mm;
- range of action at parking level 8000 mm;
- radius of action 8200 mm;
- digging depth 5100 mm.
- Characteristics with a handle whose length is 2200 mm:
- nominal bucket volume 0.5 m3;
- loading height 5700 mm;
- range of action at parking level 8200 mm;
- radius of action 8400 mm;
- digging depth 5400 mm.
- Characteristics with a handle whose length is 2800 mm:
- nominal bucket volume 0.4 m3;
- shipping height 6050 mm;
- range of action at parking level 8760 mm;
- radius of action 9000 mm;
- digging depth 6000 mm.
- Characteristics with a handle whose length is 3400 mm:
- nominal bucket volume 0.32 m3;
- shipping height 6350 mm;
- range of action at parking level 9300 mm;
- radius of action 9600 mm;
- digging depth 6600 mm.
- Excavator ET-16-20: engine model D-245;
- power 77.2 kW;
- hydraulic system - PSM.
- Excavator ET-16-30:
- power 77.2 kW;
- hydraulic system - Bosch-Rexroth.
- Excavator ET-16-40:
- power 89.2 kW;
- hydraulic system - Bosch-Rexroth.
- ripper used when opening the asphalt crust of frozen soil, excavating curb stones;
- hydraulic hammer, which is used to destroy concrete and reinforced concrete structures and loosen frozen soils;
- grab used when digging pits, trenches and loading soil into vehicles;
- buckets of various capacities.
- high cross-country ability;
- availability of a powerful and reliable diesel engine;
- sustainability;
- high performance;
- ease of operation and maintenance;
- reliability and long period of use;
- versatility due to the use of various working equipment;
- the presence of a single cabin with a large glass area and guaranteeing safety, protection from dust, comfort in the workplace, and wide visibility of the work being carried out;
- the presence of compartments for the operator’s personal belongings, as well as essentials (for example, a first aid kit, fire extinguisher and others);
- the presence of a comfortable driver's seat;
- thoughtful arrangement of devices that are designed to monitor and control equipment.
Excavator TVEX ET-16 technical characteristics of the equipment used:
- bucket rotation 173 degrees;
- bucket rotation 173 degrees;
- bucket rotation 173 degrees;
The TVEX ET-16 crawler excavator is manufactured in the following modifications:
- engine model D-245;
- engine model Perkins 1104C-44;
The excavator of this model is a multi-purpose machine with a widened-extended stroke. It is designed for digging quarries, pits, trenches on soil from the first to fourth categories, and loading bulk material into vehicles. In addition, it is designed to work with pre-loosened frozen soils and rocks. Its special feature is the ability to work on surfaces with low bearing capacity (for example, marshy areas).
The equipment is equipped with such equipment as:
The TVEX ET-16 crawler excavator is characterized by the following advantages:
Crawler excavator ET-16 - technical characteristics
content .. 10 11 12 13 14 ..Technical characteristics of ET 16
content .. 10 11 12 13 14 .. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
zinref.ru
Technical characteristics of the TVEX ET-16 excavator
| Weight, t | 16 |
| Bucket capacity (according to SAE), m3 | 0,65 (0,5; 0,4; 0,32) |
| Length, mm | 8200 |
| Width, mm | 3150 |
| Height, mm | 3070 |
| Engine | Perkins 1104C-44TA |
| Engine power, hp | 123 |
| Cycle duration, s | 16,5 |
| Pressure in the hydraulic system, MPa | 28 |
| Specific ground pressure, kg/cm2 | 0,19 |
| Travel speed, km/h | 2,4 |
LLC “Experimental Mechanical Plant”
Order
Single-bucket hydraulic crawler excavators ET-14, ET-16, ET-18, ET-25, ET-26.
Crawler hydraulic excavator ET-14
Designed for the development of pits, trenches, quarries and wells in soils of categories I-IV, loading and unloading of bulk materials, loosened rocks and frozen soils (with pieces no more than 200 mm in size), as well as for other work in various branches of industry, road construction -transport and public utilities. The short track allows the ET-14 excavator to be transported on a standard trailer, with the track mounted perpendicular to the trailer. The reduced radius of the turntable allows the ET-14 excavator to work in cramped conditions. The ET-14 excavator can be equipped with various types of replaceable working equipment: replaceable handles with a length of 2200, 2800 and 3400 mm; buckets V= 0.65, 0.5 and 0.4 m3; hydraulic hammer MG-300; grab GK-221; ripper.
Crawler hydraulic excavator ET-16
Designed for the development of pits, trenches, quarries in soils of categories I-IV, loading and unloading of bulk materials, loosened rocks and frozen soils (with pieces no more than 200 mm in size), as well as for other work in industrial, urban, rural, transport and reclamation construction. The ET-16 excavator is designed on a widened-extended caterpillar track for working on soils with low bearing capacity, for example, for reclamation and peat work in swampy areas. The width of the excavator caterpillar tracks is 1000 mm. Specific ground pressure 0.19 kg/cm2. The ET-16 excavator can be equipped with various types of replaceable working equipment: replaceable handles with a length of 2200, 2800 and 3400 mm; buckets with a capacity of 0.65, 0.5 and 0.4 m3; hydraulic hammer MG-300, grab GK-221, ripper 314-03-40.17.300
Crawler hydraulic excavator ET-18
Designed for work on soils with low bearing capacity, for example for reclamation and peat work in swampy areas. The ET-18 crawler hydraulic excavator is an excavator of the 4th size group, has higher digging parameters compared to the ET-14 excavator and an increased bucket capacity of up to 1 m3. The rotary platform is unified with the EK-18 excavator. The ET-18 excavator can be equipped with various types of replaceable working equipment: replaceable handles with a length of 2800 and 3400 mm; buckets with a capacity of 0.77 and 0.65 m3; hydraulic hammer MG-300; grab GK-221; ripper 225-00-40.17.400; five-jaw grabs for bulk and non-bulk cargo; log grabber 313-00-40.12.00 with rotator.
Crawler hydraulic excavator ET-25
Used for work requiring high machine mobility. Crawler hydraulic excavator ET-25 – 4 size groups, bucket capacity 1.25 m3. The excavator uses centralized lubrication of working equipment and a pre-starting liquid heater made in Germany, which ensures engine starting at low temperatures and efficient heating in the cabin. The ET-25 crawler hydraulic excavator has a wide range of replaceable working equipment: handle L= 3400 mm and bucket V=0.77m3; hydraulic shears NG-1622; concrete breakers IG-811, IG-8214; ripper 225-00-40.17.400; grab GK-221 with rotator 318-00-40.31.000 and extension 313-00-40.300.900; grab GP-554 (GPS-555) with a capacity =0.6 m3, with a rotator 318-00-40.31.000; log grabber 313-00-40.12.000 with rotator 318-00-40.31.000.
Crawler hydraulic excavator ET-26 (KiT-26)
Designed for the development of pits, trenches, quarries in soils of categories I-IV, loading and unloading of bulk materials, loosened rocks and frozen soils (with pieces no more than 200 mm in size), as well as other work in industrial, urban, rural, transport and reclamation construction.
The excavator uses a multi-support design of a crawler carriage with rigid installation of support elements with a tension mechanism for the caterpillar belt. For high reliability of operation in any conditions, the excavator is equipped with a hydraulic pump and BOSH-REXROTH travel and rotation hydraulic motors. Centralized lubrication of working equipment was used. The ET-26 excavator is equipped with a comfortable cabin of modern design. The cabin provides good visibility for the operator, has high vibration resistance, sound insulation and a heating installation. The cab is equipped with a sprung, adjustable seat that protects the operator from vibration. To automatically monitor the current state and warn about maximum deviations of operating parameters, an electronic control panel is installed in the excavator cabin. The excavator is equipped with a four-stroke six-cylinder diesel engine YaMZ-236M2. To quickly start the engine at subzero ambient temperatures, a pre-heater is installed on the excavator. The excavator has a large set of replaceable working equipment.
Excavators of the ET series can be equipped, at the customer’s request, with a Perkins engine, a hydraulic pump and Bosch-Rexroth hydraulic motors.
| Specifications | |||||
| Options | ET-14 | ET-16 | ET-18 | ET-25 | ET-26 (KiT-26) |
| Weight, kg | 148000 | 16000 | 18500 | 26500 | 37 000 |
| Bucket capacity, m3 | 0.65 (0.31, 0.4, 0.5) | 0.65 (0.32, 0.4, 0.5) | 1.0 (0.65, 0.77) | 1.25 (0.77, 1.4) | 1.11 (0.78, 0.98, 1.42) |
| Engine | D-245/ Perkins 1104S-44 TA | D-245/ Perkins 1104S-44-TA | D-245/ Perkins 1104S-44-TA | YaMZ-236G5/ Perkins 1106C-E60TA | YaMZ 236M2 |
| Engine power, kW | 77.5/90.5 | 77.5/90.5 | 77.5/90.5 | 110/125 | 132 |
| Cycle duration, s | 16 | 16.5 | 18.5 | 22 | 16-18 |
| Pumping unit capacity, l/min | 248 | 258 | 248 | – | 2x210 |
| Turntable rotation speed, rpm | 9 | 9 | 6 | – | 11 |
| Max. effort when digging with a bucket, kg | 7500 | 8000 | 9600 | – | 18600 |
| Max. force when digging with the handle, kg | 7000 | 7100 | 8100 | – | 11800 |
| Traction force, kg | 10500 | 12300 | 12400 | – | 21000 |
| Specific ground pressure, kg/cm2 | 0.39 | 0.19 | 0.43 | 0.55 | 0.55 |
| Travel speed, km/h | 2.4 | 2.4 | 2.4 | 2.3 | 1.8-3.8 |
| Max. digging (grabbing) radius, m | 8.2 | 8.2 | 9.1 | 9.8 | 10.1 |
| Max. digging depth, m | 5.2 | 5.1 | 6.0 | 6.48 | 6.52 |
| Max. unloading height, m | 5.42 | 5.52 | 6.0 | 7.0 | 6.52 |
| Angle of rotation of the bucket, degrees. | 173 | 173 | 177 | 177 | – |
| Dimensions, m | 8.2x2.75x2.99 | 8.2x3.15x3.07 | 9.4x2.75x3.18 | 9.9x3.0x3.45 | 10.35x3.0x3.34 |
www.omz.ru
Recommendations
Work on soils with low bearing capacity, for example for reclamation and peat work in swampy areas.
Excavator on a widened-extended caterpillar track. The width of the track tracks is 1000 mm. Specific ground pressure 0.19 kg/cm2.
The excavator can be equipped with various types of replaceable working equipment and working parts:
- Interchangeable handle lengths: 2200 mm, 2800 mm, 3400 mm
- Buckets with capacity: 0.65 m3,0.5 m3,0.4 m3,0.32 m3
- Hydraulic hammer MG-300
- Grab GK-221
- Ripper 314-03-40.17.300
The engines fully comply with all international environmental requirements and have a number of significant advantages:
- twice the service life and warranty period compared to domestic engines;
- 10% more torque;
- ensuring fuel savings of 10-20% depending on the type of work;
- reduction of maintenance time by 20% due to increased intervals between maintenance;
- reduction of noise and vibration at the operator’s workplace.
Materials used by Tverskoy Excavator OJSC, https://www.tvexc.ru.
Excavator ET-16
| Catalog of spare parts for Excavator ET-16 Purpose: The ET-16 single-bucket excavator is a multi-purpose earth-moving machine designed for developing pits, trenches, quarries in soils of categories I-IV, loading and unloading bulk materials, loosened rocks and frozen soils /with pieces no more than 200 mm in size/, as well as for other work in industrial, urban, rural, transport and reclamation construction. The excavator remains operational in the ambient temperature range from -40°C to +40°C. Geometric characteristics of the excavator: Specifications:
|
stroydorteh-pkf.ru
ET 16 excavator with the most powerful drive in its class 1000258092
MORE ABOUT ET16 TECHNOLOGY AND ITS ADVANTAGES:
- The most powerful drive in its class
- Load sensing hydraulics and LUDV* for precise operation and optimal results
- The largest cab in its class for complete freedom of movement: ergonomic design and high-quality equipment
- Flexibility in tight spaces: optional telescopic undercarriage 990 – 1300 mm, folding elements to increase blade width, cab or roof can be removed without negatively affecting function
- Very easy access for service: large bonnet and removable covers
- Optimally protected lift arm cylinder on the top side of the boom
- Productive 2-line auxiliary hydraulic system with its own free-flow return line
Operating parameters:
Transport weight min. 1,402 kg Operating weight 1,529 – 1,720 kg Breaking force max. 7.9 kN Lifting force max. 15.3 kN Dig depth max. 2.413 mm Dumping height 2371 – 2518 mm Scooping radius max. 3.861 mm Turntable speed 9.8 1/min Dimensions L x W x H 3644 x 990 x 2285 mm
Engine parameters:
Engine manufacturer Yanmar type 3TNV76 Engine 3-cylinder diesel engine, water-cooled Displacement 1,116 cm³ Speed 2,200 rpm Engine power according to ISO 13.2 kW Battery 44 Ah Fuel tank capacity 24 l
Hydraulic installation:
Work pump gear pump Delivery capacity 33.3 l/min Working pressure For working and travel hydraulics 200 bar Working pressure - turntable 130 bar Hydraulic tank 20 l
Driving performance:
Travel speed 4.1 km/h Track width 230 mm Ground clearance 180 mm
Dumpboard:
Width (folded in) 990 mm Height 215 mm Stroke max. above ground 235 mm Stroke below ground level 270 mm
