The XCMG GR215A grader has a weight of 16 tons and all-wheel drive; it belongs to the middle class of construction equipment. The special machine is designed to form a preparatory layer when laying roads and constructing dumps up to 1.5 m high. The motor grader is used both independently and in combination with other equipment. In the municipal sector, special equipment is used at any time of the year.
Photo XCMG GR215
Navigation
- Features and Benefits
- Technical characteristics and dimensions
- Engine
- Device
- Chassis
- Operator's cabin
- Control system
- Ease of operation and maintenance
- Attachments
- Modifications
- Equipment
- Cost of new and used
- Analogs
Return to navigation
Characteristics of the manufacturer's models
The XCMG grader has an automatic locking differential in its design. The machine can work at a slope of 20º. The working system pressure is 18 MPa. Weight - 16500 kg. Traction force - 87 kN. Engine power 160 kW.
The cab is diamond-shaped and has a beveled front edge. The driver's seat is adjustable. The dashboard can be pulled out. The camshaft shifts when the clutch is not working. At the customer's request, an air conditioner can be installed. The blade is controlled using hydraulic cylinders. The grab blade is located on the turntable. A hydraulic control system is installed.
At the customer's request, a ripper can be installed. Dimensions: length - 8970 mm, width - 2625 mm, height - 3470 mm. Blade dimensions - 4270x610 mm. Ground clearance - 430 mm. The lifting height of the blade is 450 mm. Cutting depth - 500 mm. The motor grader driver uses data from the on-board diagnostic control system. You can control the operation of the engine, gearbox, and hydraulic system. All data is shown on the display, and a signal alerts you to problems.
Different modifications differ in their size, weight and traction force.
Improved models are available that can operate in temperatures down to -30ºC. The kit includes a pre-heater and a window heating system. The cabin is lined with thermal insulation material and has heating. The chair is heated.
Gr165
The XCMG GR165 motor grader is an earth moving vehicle. The unit performs layer-by-layer development of soil with its transverse movement. The technique is used in road construction. The unit can also be used in the work of public utility organizations to maintain streets, highways and squares. The grader is also used to level slopes, create trenches and excavations, and clear snow. The working part of the machine is the grader blade. The ROPS system allows you to calculate the movement of the blade and makes work more efficient.
Technical characteristics of the XCMG GR165 motor grader:
- Weight - 15,000 kg.
- Speed – up to 38 km/h.
- Traction force - 82 kN.
- Blade dimensions - 3965x610 mm.
- Turning radius - 7.3 m.
- Engine power 125 kW.
- Length - 8900 mm.
- Width - 2625 mm.
- Height - 3470 mm.
- Ground clearance - 430 mm.
The distance between the bridges is 6266 mm. The frame rotation angle is 25º. The maximum lifting height of the blade is 450 mm. Wheel formula - 6x4. The pressure in the hydraulic system is 18 MPa.
Gr180
The XCMG GR180 grader weighs 15.4 tons and has an engine power of 138 kW. The unit is equipped with a hydromechanical transmission. The number of forward gears is 6, reverse gears are 3. The power steering gearbox is equipped with electric control. The front axle is welded, made of steel. The rear axle design includes a bevel gearbox.
Technical parameters of GR180:
- Wheel formula - 6x4.
- Forward speed - 38 km/h.
- Reverse speed - 23 km/h.
- Turning radius - 7.3 m.
- The surmountable slope is 20º.
- Tire pressure - 260 kPa.
- Fuel tank capacity - 280 l.
- The volume of the cooling system tank is 50 l.
- Dimensions: length - 8900 mm, width - 2625 mm, height - 3470 mm.
- Ground clearance - 430 mm.
- The distance between the bridges is 6266 mm.
Gr215
The XCMG GR215a motor grader weighs 16.5 tons. Dimensions: 8970x2625x3470 mm. The speed reaches 38 km/h. The traction force is 87 kN. Tire pressure - 260 kPa. The pressure in the cylinders is 18 MPa.
Description of technical characteristics:
- Turning radius - 7300 mm.
- Lifting height - 450 mm.
- Digging depth - 500 mm.
- The cutting angle of the blade is 28-70º.
- The rotation angle is 360º.
- Blade dimensions - 4270x610 mm.
- Engine power - 160 kW.
- Engine capacity - 8300 ml.
- Speed: 2200 rpm.
- Engine weight - 702 kg.
- Engine dimensions - 1182x710x1137 mm.
This is interesting: Tracked vehicles from Hyundai
Maintenance
The operator of the motor grader model in question has an on-board control and diagnostic system at his disposal. The functions include monitoring the condition of the engine, hydraulic system, and gearbox. Information is displayed on the central display, and any problems are notified by light and sound alarms.
The turntable on which the grader blade is installed has anti-wear linings.
Photo source: gkgross.ru The operator has an on-board control and diagnostic system at his disposal
Main technical characteristics of the motor grader
| Rated power/rotation speed kW/rpm | 160/2200 164/2200 | |
| Dimensions (mm) with standard equipment | 9242*2625*3470 | |
| Weight (kg) with standard equipment | ||
| Max. steering angle of front wheels | ||
| Max. front wheel angle | ||
| Max. Front axle swing angle | ||
| Frame rotation angle | ||
| Max. turning radius | ||
| Max. lifting height(mm) | ||
| Max. depth (mm) | ||
| Max. Tilt angle | ||
| Cutting angle | ||
| Angle of rotation | ||
| Length*blade height (mm) | 4270*610 | |
| Forward speed km/h | 5,8,11,19,23,38 | |
| Reverse speed km/h | ||
| Max. traction force(f=0.75) kN | ||
| Max. Climbability | ||
Take a look at other types of equipment:
| |
| |
| |
| |
| |
| |
|
- Front loaders
XCMG GR215A DEVICE
XCMG GR215A is manufactured in China using technology from the American company Caterpillar. The structure is built on a high strength steel frame. The Meritor rear axle (PRC-USA) has an automatic differential locking mechanism, which allows for maximum traction. The front axle is equipped with an auxiliary hydraulic drive (one of the differences between the GR215A and the GR215). A hydraulic displacement cylinder is built into the traction frame of the working body, which makes it possible to use the machine’s potential as efficiently as possible. The use of an articulated frame minimizes the turning radius and improves maneuverability.
Chassis parameters:
- wheel formula – 1 by 2 by 3;
- the maximum turning angle of the front wheels is 50 degrees;
- the maximum tilt angle of the front wheels is 17 degrees;
- the maximum deflection angle of the front axle is 15 degrees;
- The maximum frame rotation angle is 27 degrees.
The motor grader is equipped with tube tires with dimensions 17.5-25RP12 (pressure – 2.6 bar).
XCMG GR215A is equipped with a ZF 6WG200 hydrostatic transmission with gear shifting without changing the power flow. The gearbox is controlled using a single lever. The car has 6 forward gears and 3 reverse gears. The maximum speed in the forward direction is 38 km/h, in the rear direction – 23 km/h.
The brake system is equipped with German hydraulic components from Rexroth. The middle and rear wheels are equipped with hydraulic drum brakes, providing effective braking regardless of weather conditions. When parking, a drum hand brake is used. The pressure in the brake system is 10 MPa.
The hydraulic system is based on a gear pump. Maximum productivity – 140 l/min. Maximum working pressure – 18 MPa.
XCMG GR215A is equipped with a modern and comfortable cabin that provides optimal working conditions. Controls, buttons and knobs are arranged ergonomically, allowing you to perform complex tasks without unnecessary stress (at the tactile level). 360-degree visibility and a comfortable seating position make the driver's work easier. The cabin is equipped with a comfortable chair with height adjustment; the instrument panel can also be adjusted to suit your preferences. For this model, a climate control system is available that maintains a given temperature level. The grader is equipped with a diagnostic system that collects data from all main components (engine, transmission, hydraulic system) and displays them on the display. When problems are detected, special sound and light signals are given.
Features and Benefits
Features of the XCMG GR215A motor grader include:
- installation of a full-rotary blade and hydromechanical transmission;
- use of components from Cummins, Rexroth and ZF;
- rear axle with automatic differential lock;
- cross-country ability and maneuverability;
- front axle with volumetric hydraulic drive;
- smooth speed control;
- articulated frame with the ability to rotate 25 degrees;
- possibility of installing a bulldozer and grader working body;
- 6x4 drive.
The XCMG 215 grader is an all-season equipment; it can be used at any temperature. It is used in road and industrial construction, and in the creation of hydraulic structures. Depending on the installed working body, it performs:
- creation of dumps and other embankments up to 1.5 m high;
- strengthening slopes and banks;
- channel cleaning;
- cleaning the area from debris, snow, ice;
- planning and leveling of the construction site and for the construction of the roadway.
Return to navigation
DESCRIPTION AND PURPOSE
The model is XCMG GR215A, a continuation of the XCMG GR215 line. It differs from the basic version by an expanded range of power plants, improved parameters and wheel arrangement. The design of the equipment includes components and assemblies produced by well-known global and Chinese brands. Thanks to this, this motor grader has a high level of reliability and has an optimal ratio of quality and cost. XCMG GR215A is characterized by simple controls and wide functionality, which is especially appreciated by consumers. The availability of certificates and licenses allows the model to be used in various regions. New equipment has a warranty of 1500 operating hours or 12 months.
A more powerful engine allows the grader to effectively handle moving and cutting large volumes of soil. The XCMG GR215A performs basic operations using a blade located between the front and rear axles. This equipment allows you to clear the road surface of snow and ice, cut and divert soil to the side, and form slopes on the road. Additional devices (front blade, ripper) are used to transport soil, mix materials, loosen asphalt pavement or other types of surfaces.
Grader rental - equipment that is used in winter and summer
A grader is usually called one of the varieties of special equipment that is used in road construction, as well as for clearing sediments in the winter season. In the warm season, the grader is used for work related to excavation and profiling tasks. Renting a grader from the Group will help you get rid of unnecessary overhead costs, and at the same time get high performance results from powerful and functional special equipment. The fundamental task of the functioning of a grader tractor is to level, level the soil, soil or snow. In terms of design, the grader in Tomsk is presented as a self-propelled machine designed for the stage of planning and profiling slopes, areas, as well as for functional leveling of soil, construction bulk materials and snow. There is not only a self-propelled version, but also a trailed grader that performs similar tasks. The Group's grader services will help you complete complex road work tasks at any time of the year.
Additionally, the GS grader uses an installation in the form of a pickaxe, which has from 7 to 11 teeth. This device is designed to effectively destroy old asphalt and road surfaces. Renting a grader in Tomsk is intended for work in road construction, on a construction site, in agriculture, at airfields, as well as in public utilities. It is necessary to take into account that the DZ grader has similar technical characteristics to a bulldozer; however, it is not a direct “relative” of a bulldozer due to the technical features of the equipment’s operation, as well as its functionality. Grader services in Tomsk from the Group will allow you to perform the following tasks and operations:
- Mixing different types of bulk materials
- Loosening the soil
- Site planning for construction and road works
- Leveling the soil
- Snow removal in winter.
In our company, you can choose to rent a grader in Tomsk for various types of work on favorable terms of cooperation. In the feedback form, you can leave a request for grader services in Tomsk, our specialists will contact you and clarify further terms of cooperation.
Scope of use Motor grader model XCMG GR215
The motor grader is designed for layer-by-layer development of soil and its transverse movement along a construction site or road. The equipment is used for excavation and leveling work in the construction of facilities, roads, and site leveling. Widely used in various types of municipal work, when cleaning the roadway of highways and city roadways.
A motor grader is a striking example of high-performance special equipment with appropriate dimensions, which can be functional, productive and reliable. She is not afraid of difficult climatic conditions and sudden temperature changes. The use of the unit in various climatic zones has shown its high performance and reliability. Accurate fulfillment of the specified parameters during planning work has made this motor grader in demand not only in the construction of modern highways, but also in the planning of agricultural and especially irrigated lands, where the accuracy of the soil surface very clearly affects the economic effect of saving moisture and obtaining high yields.
ENGINE
The XCMG GR215 motor grader is equipped with a 4-stroke Cummins 6CTA8.3 C21 diesel engine, manufactured in China using American technology. This engine is characterized by high structural strength and low fuel consumption (up to 20% less in comparison with models of a similar power range). A modern turbocharger with a bypass valve allows for improved torque parameters when operating at low speeds. The design of the unit involves the use of a minimum number of elements, which means fewer connections and easier maintenance. Cooling is carried out using a forced-type liquid system.
Characteristics of the Cummins 6CTA8.3 C21 engine:
- working volume – 8.3 l;
- rated power – 160 kW;
- estimated speed – 2200 rpm;
- maximum torque – 990 Nm;
- weight – 702 kg;
- environmental class - Euro-1.
Some modifications of the XCMG GR215 are equipped with a Cummins 6CTAA8.3 engine, which has a similar design, but different parameters:
- working volume – 8.3 l;
- rated power – 153 kW;
- estimated speed – 2200 rpm;
- maximum torque – 969 Nm;
- environmental class - Euro-2.
This is interesting: Crawler excavators
Modifications
In addition to the XCMG GR215 motor graders, the GR215A model is available. The cars differ in their engines: in the second case it is also Cummins, but in addition to the 6CTA8.3, it is possible to install a more powerful QSB6.7 (164 kW). In addition, the overall dimensions and weight of the modification are larger: the length is 9,180 mm, the operating weight is 17,000 kg. A few more differences: wheel formula - 6x6, traction force - 115.3 kN.
There is also a GR215L version: the basic machine has been modified for operation at lower temperatures (the engine can be started at -30°C). The delivery set includes a pre-heater and a glass defrosting system. The cabin is made using additional seals and is equipped with a heating system. There is a heated chair.
Grader in Tomsk - order equipment from Sibtranssoyuz
Only in the Group you can find all the necessary special equipment that is intended for road and construction work; a grader in Tomsk will help you clear snow drifts in winter, and in the warm season. The fleet of special equipment is represented by powerful and functional motor graders, weighing from 12 to 26 tons. If necessary, you can get detailed advice on obtaining the conditions for a grader service in your city. The main advantages of renting graders:
- Low rental price, you can rent for a few hours or enter into a full-fledged contract
- It is possible to use special equipment to work at night
- Rental available both in winter and summer
- The special equipment fleet is represented by a wide range of machines
- You can receive all the necessary accounting documents confirming payment for the service
Grader services - profitable, reliable and convenient
By ordering a grader service, you optimize the work process on the construction site, and also optimize the work on the road. A trailed grader, as well as a self-propelled version, can be classified as a construction equipment class and a road equipment class. Therefore, a wide range of special equipment functionality makes grader services in Tomsk popular and in demand. Using each type of machine, you can get excellent work results. The John Deere grader is used in the road and construction industries for leveling soil and soil, as well as road surfaces. A tractor grader is also used to construct a certain height embankment from the roadbed, while the side reserves are used in the machine. It is recommended to use the MTZ grader for slightly rough terrain and flat terrain, to form an embankment no more than 1 meter.
The HBM grader carries out layer-by-layer leveling of the soil after using a special earthmoving machine. The GS1402 grader is used to form special drainage channels, road slopes, as well as to form a shoulder, excavation or embankment. The Caterpillar grader has proven itself to be excellent when carrying out repair work on gravel and dirt roads. The powerful and practical grader GR215 is most often used in agriculture for various irrigation and land reclamation work. To clear the streets of snow and other precipitation, it is recommended to use the Russian-made DZ180 motor grader. Powerful domestic equipment for road construction is known to everyone, and the technical characteristics of the DZ-180 are adapted analogues for foreign models of snow removal equipment.
Renting a grader will ultimately help you get excellent results, which will allow you to carry out further stages of work on the use of soil and road surface. Main functions of a grader in Tomsk:
- Work on leveling land plots of any size
- Processes of loosening the top layer of soil
- Clearing roads and streets from snow drifts
- Transportation of various bulk materials over a certain distance, etc.
By contacting our company, you will receive comprehensive information about the purpose of each type of grader in Tomsk, and we will help you choose the right type of special equipment for various work conditions in road construction, agriculture and construction.
Electrical control system
The concrete pump programmable control (PLC) system uses fewer auxiliary relays, which improves its reliability.
Electrical elements are 90% Japanese-made (Mitsubishi).
Change the direction of pump operation using a proximity switch.
The intelligent control system of the ZOOMLION HBT 60.13.90SU concrete pump makes operation simple and reliable.
The electronic display of the control system allows you to monitor and manage processes and key indicators in real time.
| Name | Brand | Country of origin |
| Controller | IFM | GERMANY |
| Circuit breaker | T.E. | FRANCE |
| Relay | T.E. | FRANCE |
| Air breaker | L.S. | KOREA |
| Remote control | ZOOMLION | ZOOMLION |
| Proximity switch | T.E. | FRANCE |
| Contactor | L.S. | KOREA |
Device
The XCMG 215 grader is equipped with an all-welded frame made of square pipes. This eliminates deformation when torques and other shear loads occur. The turning part is characterized by smooth movement. The tilt is carried out first in the horizontal, then in the vertical direction. The articulated connection of the frame elements allows you to reduce the turning radius and make the machine more maneuverable.
Low pressure hydraulics power the attachments. This system does not require additional maintenance, is reliable and durable.
Return to navigation
Chassis
The XCMG GR215A grader is equipped with a German gearbox with a ZF electronic control system or a Chinese model WG180 Advance. They have similar operating parameters; gear shifting is carried out without loss of power.
The Meritor rear axle is equipped with an automatic locking differential, which increases the traction force to 87 kN. The main brake mechanisms are single-circuit, hydraulic, immersed in oil, located in the hubs of 4 wheels. Hydraulic elements made in Germany by Rexroth are connected to them, and the mechanisms themselves are installed in a drum type. The parking brake is installed manually, also of the drum type. Drive motor grader XCMG GR215A – 6x4.
Return to navigation
Advantages and advantages of Chinese special construction equipment.
Chinese motor graders have all the necessary characteristics that confirm their high operational reliability, productivity, excellent maneuverability and maintainability. Chinese modern production is based on a clear position of meeting the wishes of the customer and creating worthy equipment. This is based primarily on the fact that the Chinese leadership has the goal of transforming its country into a developed modern society that can present to the world community not only the cohesion of its people, but also high-quality products. Consolidation of our own efforts and alliances with European manufacturing companies today gives a tangible result in the form of a large model range of a wide variety of construction equipment. Chinese-made production sites are equipped with modern technological assembly lines, where a system for checking product quality is constantly in place. In addition, European concerns are not afraid to provide licenses for the production of products under their brand, which, of course, increases the responsibility of manufacturers and the quality of their products. You also sometimes hear that Chinese equipment is not of the required level of quality, but these words are too rare to form a general opinion about equipment that has excellent production performance and a low price.
From us you can buy an XCMG GR215A Motor Grader (all-wheel drive) at the price of the manufacturer and spare parts for it.
comments powered by HyperComments
Operator's cabin
The cabin has an original shape, which is the manufacturer’s own design. The operator's seat is adjustable. The instrument panel can be chosen from two options - American CURTIS or German VDO. They are able to move in the longitudinal direction for the convenience of the driver.
The cabin of the XCMG GR215 grader includes a heater and air conditioner, which provide a comfortable microclimate when working in any weather conditions. Panoramic glazing guarantees safety, and a comfortable chair reduces the load when working for a long time.
Return to navigation
Cooling system
The cooling equipment of the ZOOMLION HBT 60.13.90SU concrete pump maintains the temperature of the working fluids of the hydraulic system not higher than 60oC and ensures the normal operation of all units. At the customer's request, it can be equipped with a water cooling system.
Other components and assemblies of the concrete pump
| Node name | Brand (country) |
| Motor 90 kW | China |
| Engine cooling system | |
| Main hydraulic pump | KPM |
| Constant pressure pump | Rexroth |
| Safety Valve Base | Rexroth/Atos |
| Safety valve | |
| Reducing valve base | |
| Reducing valve magnet | |
| Control valve | Shanghai Lixin |
| Stop valve | STUFF |
| Battery | Tianren |
| Cooling system | Xin sheng |
| Hydraulic motor | Eaton |
| Reverse filter | LEEMIN |
| Suction filter |
Technical characteristics of the concrete pump ZOOMLION HBT 60.13.90SU
| Name | Unit change | Meaning |
| Maximum theoretical capacity (high/low pressure) | m3/h | 70/42 |
| Maximum outlet pressure (high/low pressure) | MPa | 13/7 |
| Control valve type | S-shaped | |
| Bore and stroke | mm | Ø200×1800 |
| Maximum fraction size Internal diameter of the outlet pipe | mm | 50/Ø150 40/Ø125 |
| Concrete pump hopper capacity | l | 600 |
| Hopper height | mm | 600×1400 |
| Outlet diameter | mm | Ø180 |
| Electric motor model | YGM2-280M-4 | |
| Rated power | kW | 90 |
| Concrete pump power supply | V | 380 |
| Rated speed | rpm | 1480 |
| Hydraulic circuit type | Open | |
| Pumping system pressure | MPa | 34 |
| Distribution system pressure | MPa | 23 |
| Mixing hopper pressure | MPa | 14 |
| Mixing hopper rotation speed | rpm | 32 |
| Length × width × height | mm | 6800×2200×2260 |
| Total weight of concrete pump | kg | 6450 |
Attachments
The GR215 motor grader can be purchased complete with standard or additional equipment. Moreover, each organ has its own characteristics. The bulldozer blade is controlled using a pair of hydraulic cylinders that allow you to change the angle of inclination. The grader equipment is mounted on a pair of turntables. Control is carried out using a hydraulic system that rationally distributes the load.
Bulldozer blade
The cutting edge is made of high-strength metal. Ripping equipment is installed upon prior order. Additionally, for the XCMG 215 grader, you can order a TOPCOM or MOBA ultrasonic or laser leveling system.
The motor grader blade is capable of lowering to a level of -0.5 m and rising to a level of +0.46 m, as well as rotating 360 degrees. This ensures the versatility and functionality of the equipment, increases its productivity and efficiency.
Return to navigation
Motor grader model XCMG GR215
The motor grader is equipped with an all-wheel drive blade and has a hydromechanical transmission. The main distinctive characteristic and advantage of the motor grader is the presence of a drive on all wheels, its wheel formula is 6x6, which provides excellent traction characteristics, cross-country ability and maneuverability.
engine manufactured by CUMMINS D6114ZG14B, turbodiesel, 4-stroke, six-cylinder, has direct injection, water cooling with sequential and air cooling.
The brake system contains hydraulic components from REXROTH. Hydraulic system for 4 rear wheels, multi-disc oil-immersed brakes, which are built into the hubs of the balancing trolley.
Drum parking brake, manual type. The handbrake is connected to a braking system that is built into hubs mounted on the driven transmission shaft. This type of brake allows precise, reliable operation and safe braking.
The hydraulic control system has an articulated frame and hydraulic boost control. The system uses a gear pump providing a pressure of 16 MPa and a maximum capacity of 16x2.2.
An articulated frame with a rotation angle of 25 degrees can ensure efficient performance of various earthmoving operations using grader and bulldozer blades with a large working width for soil or construction raw materials. Using the principle of a hinged - articulated frame made it possible to reduce the turning radius to 7.3 meters.
The rotating mechanism provides soft and easy rotation of the blade in vertical and horizontal planes. The presence of a forward-backward shift function in the control panel using a Husco multi-port valve ensures high-quality work.
The driver's cabin is equipped with a modern instrument panel from the well-known German company VDO; the driver's seat is height adjustable. The cabin is equipped with air conditioning and a climate system, which allows creating comfortable conditions for the worker in the harsh climatic conditions of the north and in the hot zones of the south.
The grader blade and bulldozer blade are equipped with a double turntable and a turntable. The interaction between the control system and the turntable is highly accurate. The blade is controlled using a pair of hydraulic cylinders, which allows you to change the angle of inclination of the working body depending on the requirements of planning work or the terrain.
The complete set of the motor grader can be basic or supplemented at the request of the customer. The basic package includes: a ripper, bulldozer and grader blades, an ultrasonic or laser leveling system MOBA or TOPCOM, adapted for the construction of highways, the construction of runways and for leveling land during reclamation work. Includes single or double leveling protection plate.
