Mustang 2076 is a multi-purpose loading device from an American manufacturer, in demand among demanding users, and designed for a mass audience due to its excellent price-performance ratio. This machine received excellent results in factory endurance tests, and thanks to this it is well adapted to the northern regions of Russia, as well as temperature changes. It is positioned as a mini loader in the budget price range, but at the same time has cool loading functions. The model in question is produced according to modern standards and norms, despite the fact that it has been on the market for quite a long time. This article presents the main capabilities of the Mustang 2076 model, its characteristics, operating features and cost.
Mustang 3300V skid steer
The Mustang 3300V mini loader is distinguished by its large dimensions for its class of equipment, increased load capacity and power.
It copes with various tasks during construction, production, utility work and contributes to the mechanization of gardening activities. The loader is characterized by the presence of a skid steer, which allows the equipment to work in confined spaces, while having high productivity, as well as vertical lift of the boom mechanism. Mustang 3300V skid steer
Features and Benefits
The prototype of the Mustang 3300V mini loader was the 2700V model. They are similar in appearance, but the modern design has an increased overall length and height of unloading materials along the lower bucket attachment. In the name of the loader, the index “V” denotes the vertical trajectory of the boom mechanism.
The main advantage of the machine is the ability to lift cargo vertically. This allows, when extending the mechanism, not to go beyond the dimensions of special construction equipment, and also eliminates the need for additional space on the side of the engine compartment.
Mustang 3300V photo
The loader is very popular in construction activities. The maximum unloading height at the lower hinge is 3.33 m, which guarantees loading of material into dump trucks, dump trucks and other large vehicles. To increase work productivity, a reinforced boom is installed.
Technical characteristics and dimensions
A counterweight is installed on the loader. It is located at the rear of the machine and allows you to handle heavier loads. The main technical characteristics of the Mustang 3300V include:
- load capacity – 1.5 t;
- pull-out force – 2.95 t;
- weight of equipment - 4.43 tons;
- maximum unloading height – 3.33 m.
The total length of the loader is 3.9 m. The kinematic diagram of the operation of the boom equipment corresponds to the prototype diagram. The arrow has greater strength due to reinforcement elements. The high lift height and lifting capacity make the machine efficient and productive in any task.
| Ground clearance, mm | 229 |
| Wheel (tracked) base, mm | 1257 |
| Overall dimensions, mm | 3874x1829x2085 |
| Maximum height of the bucket suspension point, mm | 3332 |
| Maximum height with raised bucket, mm | 4369 |
| Reach of the edge of the working unit (bucket), mm | 813 |
| Turning radius without bucket, mm | 1422 |
| Turning radius with bucket, mm | 2400 |
Engine
The excellent technical characteristics of the Mustang 3300V are due to the installation of a four-cylinder power unit manufactured by Yanmar with a capacity of 62.6 kW or 84 horsepower. The model is equipped with turbocharging and is characterized by a rotation speed of 2500 rpm and meets the Tier III exhaust cleanliness standard.
The 3300V NXT2 modification is equipped with a reduced power engine – 52.7 kW or 70.7 horsepower. The exhaust gas quality has been improved and certified in accordance with Tier IV. The standard equipment of the 4TNV98CT-NMS model includes the installation of a DPF filter to remove solid particles from the exhaust. It is located directly in the exhaust pipe and prevents soot from entering the environment.
To make it easier to start the engine in cold weather, automatic glow plugs and a heater are provided. For high-quality and trouble-free operation in the summer, a cooling radiator is used, made of aluminum and having a large cooling area. It prevents overheating of the hydraulic system and power unit.
The capacity of the diesel fuel tank is 79.5 liters.
Chassis
The Mustang 3300V mini loader has great stability when working on any type of foundation thanks to the installation of large wheels. Now instead of 12 x 16.5, 14 x 17.5 are installed. The ground clearance has increased and the operator's seat has also been moved upward, which allows for better inspection of the work site. The operator is located at a height of 1.05 m above ground level. Installing larger wheels widened the car to 1.83 m.
The maximum speed is 19.6 km/h.
Hydraulic system
The hydraulics of the Mustang 3300V mini loader allow the operator to gradually, without jerking, raise and lower the work equipment by smoothly adjusting the fluid flow. To increase the versatility of the equipment, a system for quickly replacing working equipment is provided, taking into account the connection of hydraulic hoses. The hydraulic cylinder rods are hardened and coated with chromium, which prevents corrosion and scratches due to mechanical stress and guarantees a long service life of the parts.
Compared to its predecessor, the modern model has a more powerful hydraulic system. This guarantees the ability to work with more powerful attachments. In addition to the two main hydraulic lines, an additional branch is installed for drainage. It reduces excess pressure in the system, ensuring safe operation.
The flow rate is 139.7 liters per minute of operation. In the High Flow hydraulic system, all hydraulic hoses are installed in metal tubes, which prevents damage.
Operator's cabin
The operator's cabin is a modern development of the manufacturing company. The Mustang 3300V mini loader is equipped as standard with an air conditioning system and dual control joysticks. Panoramic visibility and FOPS and ROPS protection systems ensure operator safety throughout the entire work shift.
The interior upholstery is made of soundproofing material, which reduces noise inside and improves the driver's experience. The integrated armrest provides additional comfort and safety. The cab is equipped with an operator's seat with a high back and air suspension or a mechanical equivalent. It can be adjusted depending on the individual preferences of the operator.
Due to the large viewing angle, the operator can now see the edge of the bucket. This is also facilitated by an improved cabin design, including a lower turret.
The Hydraloc locking system is activated when the operator leaves the cab. The standard equipment also includes a cup holder, lighting system, adjustable air ducts, a 12-volt power outlet, and a storage compartment.
The entrance to the cabin is through the working element. Despite this, the required level of safety is ensured by installing handrails and convenient steps on the bucket and frame of the machine.
Control system
The Gehl V330 mini loader is controlled using joysticks and the T-Bar system. You can choose the type of loader control - only using joysticks or joysticks with pedals.
A color monitor is installed in the cab, which displays data on the state of the machine during operation. There is information about fuel consumption, power plant speed, machine hours worked, diagnostic codes, and warning lights are installed.
Ease of operation is due to the ergonomic location of the controls on the dashboard - on the sides of the entrance.
Ease of operation and maintenance
Unified elements and parts make it possible to replace them regardless of the model of equipment. The Mustang 3300V HF hydraulic and electrical systems are serviced after the cab is raised.
The fuel container is located in the left pillar and is protected against unauthorized opening and punctures.
The engine compartment can be locked with a lock.
Attachments
The price of the Mustang 3300V depends on the working element and the modification of the machine. Additionally, you can purchase more than a hundred types of replacement organs, including:
- brush cutters, rakes, circular saws for work in gardening and park activities;
- grips;
- dumps;
- hydraulic drill;
- pitchforks, etc.
Attachments
- Cap caterpillars are a professional mounted device for moving through particularly dangerous off-road areas. The tracks have unprecedentedly high traction properties. The option is suitable for installation on wheels of dimensions 10x16.5; 12x16.5, and also 14x17.5. Of course, not only the maneuverability improves, but also the pressure on the ground decreases and the support area increases. Installation and dismantling of cap caterpillars does not take much time.
- Solid wheels are a worthy alternative to standard tires, which wear out quickly and have poor grip properties. In addition, solid wheels can be considered a more affordable alternative to the above-mentioned tracks. After all, such tires not only make the overall structure of the car heavier, but also have a deep tread to ensure the best cross-country ability. Solid wheels are made of durable and thick rubber that cannot be punctured.
- An excavator is a powerful lifting tool that can give the Mustang 2076 mini-loader the functions of a full-fledged excavator with hydraulic rotation. Ergonomic fastening ensures quick installation and dismantling of the product, and thereby simplifies the process of use.
- A snow shovel is an effective tool for clearing snow barriers, drifts and snowdrifts. The working surface area of the bucket is 1.4 cubic meters. m., which allows you to cope with large snow-covered areas, including loose, wet, compacted and icy snow, in a short time. In one pass you can capture a significant portion of snow, which is impossible to do with a conventional bucket. At the same time, you can reduce the time it takes to clear snow.
- The jaw bucket is a structurally complex attachment with high performance. It consists of two working parts - the so-called jaws, which are compressed against each other, and thereby hold the load so that it does not fall out of the bucket. The back of the “jaw” (bucket) acts as a blade, while the front forms a grip. Along the edges of the jaws there are teeth that additionally hold the load.
- A concrete mixing bucket is a means for preparing a uniform cement mixture. In addition, other materials can be added to such a bucket - for example, mixtures with additives to improve the quality of the asphalt pavement. The bucket can be loaded manually or by scooping concrete mixture from the ground. As for unloading, this process is carried out by tipping, or through the lower unloading hatch. A drain hose is actually connected to it for ease of unloading.
- Pallet forks are a means for “transforming” a mini-loader into a full-fledged forklift, endowed with the ability to work with cargo that is usually placed on pallets (pallets). In general, pallet forks have ample capabilities for working in urban environments. They are installed instead of a standard bucket, and are designed for a lifting capacity of up to 2.5 tons, as well as a relatively higher lifting height than a specialized forklift.
- A brush is a utility device for cleaning open and closed areas and areas. In particular, we are talking mainly about roadways and sidewalks, crowded places (public places). The brush can handle any debris, including dust, dirt, sand and other loose materials. The brush also removes freshly fallen dry snow well. The brush effectively removes all dust from the streets. It can be adjusted (rotated) up to 25 degrees. There are utility and hydraulic brushes.
- Rotary mower – equipment for agriculture, landscaping and landscaping. Helps in leveling the soil, trimming lawns, and tidying up green spaces so that they grow evenly in height. So, with the help of a rotary mower you can remove unnecessary weeds and overgrown grass - of course, this is much more convenient than in the case of a manual mower. The rotary mower has proven itself well on uneven ground.
- A stump remover is an effective tool for removing roots from the soil. To do this, the uprooter is equipped with special pointed teeth that penetrate to a depth of 0.5 meters, while removing stumps along with the underground part. The remaining roots will then dry, resulting in a beautiful, smooth, finished surface. A stump remover is indispensable when preparing soil for cultivation, as well as installing power lines.
- A sand spreader is another useful equipment that no modern public utility can do without. This option is very common on frozen and slippery roads and sidewalks that need to be sprinkled with sand, sand and salt, or sand and gravel material, as well as reagents, are suitable for these purposes. The working area of the sand spreader is within 5 meters, and depends on user settings.
- The hydraulic drill, made of durable and thick steel, is designed for drilling holes in asphalt and soil. Suitable for road and agricultural operations. Has high potential. With its help, you can drill a hole in the ground in order, for example, to install power lines, road signs and indicators, lamp posts, piles, supports, etc. The design of the hydraulic drill includes a hydraulic rotator. The hydraulic drill has a maximum drilling center of 900 mm.
- Trencher is an attachment for construction and repair operations. With this option, you can seriously expand the potential capabilities of the Mustang 2076 mini-loader. In particular, with this you can dig trenches to a depth of up to 1200 mm, and with a width of up to 200 mm. The device is controlled using a hydraulic drive, a joystick from the operator's cabin.
- Cultivator - carries out preparatory work related to planting green spaces, including lawn grass and other types of plants. The cultivator is capable of working at a depth of up to 155 mm. Equipped with sharpened blades made of durable alloy that is resistant to damage, even when hitting hard objects (stones, for example).
- A bulldozer blade is an option that can give a mini-loader the capabilities of a full-fledged bulldozer. The design of the bulldozer blade bears a very large load, which it copes with very well. All this is thanks to the material used to make the blade – it is durable alloy steel. Let us note the special bent profile of the bulldozer blade, in the lower part of which there is a cutting edge that ensures tight contact with the surface being processed.
- Log grabber – attachments for grabbing logs and other cylindrical objects. The log grabber is equipped with powerful steel teeth that tightly grip the logs. Moreover, the robust design of the log grabber provides a load capacity of up to 1000 kg. We especially note the pincer grip, which can be adjusted automatically using a lever from the operator’s cab. A log grabber is an indispensable tool for woodworking industrial enterprises.
Mustang 3300V front loader
general information
about the loader:
Mini loader Mustang 3300V with a lifting capacity of 1497 kg
Purpose
:
for work in various areas of the municipal, construction and road construction industries
Description of the mini loader and its unique characteristics:
The MUSTANG 3300V mini loader inherited the appearance and design from the MUSTANG 2700V model. The new cabin from 2700V is successfully used in the MUSTANG 3300V, the difference is that in the basic version the 3300V model has air conditioning and control is carried out in the same way. more details
sales, prices for Mustang front loaders →
Mustang 3300V Specifications
| Full title | Mini loader Mustang 3300V |
| Load capacity, kg | 1497 |
| Total weight, kg | 4087 |
| Engine model | 4TNV98T – ZNMS |
| engine's type | diesel |
| Number and arrangement of cylinders | 4 |
| Engine displacement, cm3 | 3330 |
| Engine power, kW (hp) | 62,6(84) |
| Estimated rotation speed, rpm | 2500 |
| Engine manufacturer (brand) | Yanmar |
| Maximum speed, km/h | 13 |
| Ground clearance, mm | 229 |
| Wheel (tracked) base, mm | 1265 |
| Overall dimensions, mm | 3901x1829x2085 |
| Maximum height of the bucket suspension point, mm | 3332 |
| Fuel tank, l | 79,5 |
| Hydraulic tank, l. | 40 |
| Unloading height, mm | 2504 |
| Tires | 14.00-17.5 HD |
| Type of working body | ladle |
| Bucket cutting edge width, mm | 1880 |
Front loader Mustang 2086 Front loader 2086, Mustang Mini loader Mustang 2086 with a lifting capacity of 1179 kg, Yanmar 4TNV98T – Tier III, designed for work in various areas of the municipal, construction and road construction industries – Front loaders Mini loaders
Front loader Mustang 2076 Front loader 2076, Mustang Mini loader Mustang 2076 with a lifting capacity of 998 kg, Yanmar 4TNV98T – Tier III, designed for work in various areas of the municipal, construction and road construction industries – Front loaders Mini loaders
Front loader Mustang 2066 Front loader 2066, Mustang Mini loader Mustang 2066 with a lifting capacity of 907 kg, Yanmar 4TNV98 – Tier III, designed for work in various areas of the municipal, construction and road construction industries – Front loaders Mini loaders
Front loader Mustang 2056 Front loader 2056, Mustang Mini loader Mustang 2056 with a lifting capacity of 862 kg, Deutz TD2009 – Tier III, designed for work in various areas of the municipal, construction and road construction industries – Front loaders Mini loaders
Front loader Mustang 2054 Front loader 2054, Mustang Mini loader Mustang 2054 with a lifting capacity of 748 kg, Yanmar 4TNV88 – Tier III, designed for work in various areas of the municipal, construction and road construction industries – Front loaders Mini loaders
Front loader Mustang 2044 Front loader 2044, Mustang Mini loader Mustang 2044 with a lifting capacity of 658 kg, Yanmar 4TNV-88 – Tier III, designed for work in various areas of the municipal, construction and road construction industries – Front loaders Mini loaders
Front loader Mustang 2041 Front loader 2041, Mustang Mini loader Mustang 2041 with a lifting capacity of 612 kg, Yanmar 4TNV88 – Tier III, designed for work in various areas of the municipal, construction and road construction industries – Front loaders Mini loaders
Mustang 3300V mini loader. Technical characteristics, prices and analogues
| Selecting a loader manufacturer All manufacturers | |
| A. Max. raised bucket height | 4069 mm |
| B. Max. bucket hinge height when unloading | 3132 mm |
| C. Cabin height | 2060 mm |
| D. Ground clearance (between wheels) | 201 mm |
| E. Length with bucket | 3421 mm |
| F. Length without bucket | 2667 mm |
| G. Wheelbase | 1219 mm |
| H. Unloading area | 711 mm |
| I. Horizontal lift-off angle of the bucket | 26° |
| J. Bucket tipping angle | 41° |
| K. Width on standard wheels | 12.00x16.5 |
| L. Standard bucket width | 1730 mm |
| M. Engine compartment turning radius | 1661 mm |
| N. Turning radius without bucket | 1410 mm |
| O. Turning radius with bucket | 2111 mm |
| P. Seat height | 1019 mm |
| Q. Bucket lift angle | 94° |
| R. Height of lowered bucket lip | 2413 mm |
| S. Rear overhang angle | 26° |
| Operating weight | 3713 kg |
| Tipping load | 2358/2630 kg*** |
| Rated load capacity | 1,497kg. |
| Breakout force | 2640 kg |
| Hydraulic pump supply | 81/132* l/min |
| Hydraulic pressure | 207/207* bar |
| Hydraulic tank | 61 l |
| Max. Travel speed | 0 – 12.4 km/h |
| 2-speed option | 0 – 18 mph |
| Standard bucket | 1730 mm/0.54 m 3 |
| Universal bucket | 1730 mm/0.77 m 3 |
| Light material bucket | 1730 mm/0.89 m 3 |
| Engine | |
| Manufacturer | YANMAR (Japan) |
| Fuel | diesel |
| Power | 84 hp/63 kW |
| At rpm | 2200 |
| Number of cylinders/volume | 4/3300 cm 3 |
| Fuel tank | 91 l |
| * Increased hydraulic power | |
| ***With counterweights |
| standard equipment |
| optional equipment |
| not provided |
| Control |
| control levers and pedals |
| joystick control |
| two lever control |
| Engine |
| Motor auto shutdown system |
| engine preheating |
| Turbocharged engine |
| Hydraulics |
| additional hydraulic outlet |
| enhanced hydraulics (High-Flow) |
| independent hydraulic tank |
| Operator's workplace |
| air conditioner |
| built-in cabin with stove |
| control levers and pedals |
| cabin heating |
| sound signal |
| soft armrests / seat belt |
| ROPS/FOPS cabin |
| noise reduction system |
| adjustable seat stiffness (mechanical) |
| front and rear working lights |
| Performance |
| Multi-Tach® system |
| vandal-proof protection |
| reverse horn |
| brake control (auto/manual) |
| Hydraglide™ system |
| Hydraloc™ system |
| hydrostatic Servo drive |
| boom blocker |
| bucket correction system |
| two speeds |
The Mustang 3300V skid steer is equipped with a Yanmar Tier III turbocharged diesel engine. The power of the power unit is 62.6 kW.
The bucket lifting mechanism ensures that the load is lifted to a height of 3.32 m along a vertical trajectory, which makes it possible to effectively use the new mini loader when loading dump truck bodies and when transferring materials. The boom has a reinforced structure. The carrying capacity of the new product is 1500 kg.
The new Mustang skid steer has slightly increased hydraulic power, allowing the use of more productive attachments. The control system allows for the use of either joysticks only or joysticks with pedals.
The appearance and design of the MUSTANG 3300V . The new model is longer (3901 mm), the complex kinematics of the cargo boom with vertical lift are retained, and the unloading height at the lower hinge of the bucket is increased to 3332 mm.
The new type of cabin has been successfully used in the MUSTANG 3300V ; already in the basic version, the new model is equipped with air conditioning and double control joysticks.
What gives stability to the new model is the size of the wheels, which has been increased from 12×16.5 to 14×17.5, the ground clearance has been increased, the operator’s seating position is higher 1046 mm, the width of the MUSTANG 3300V has been increased to 1829 mm due to large wheels, the increased volume of the bucket increases the productivity of the loader when loading and unloading of bulk cargo.
If you are interested in any product, please fill out this form. Our employee will definitely contact you.
TOP 4 Mustang mini loaders and their device features
A Mustang loader is a vehicle used for transporting various cargoes, performing warehouse and utility work.
Device Features
The Mustang loader has the following design:
- Power unit. It includes a cylindrical shaped stator, which is made of sheet type steel. Here the axial mechanisms are located at an angle, and the poles of the windings go to the terminal. The motor is also equipped with a rotor device, a ventilation system and a generator set.
- Control system. This includes the transmission, gearbox, electrical equipment (light and sound alarms, lighting, various sensors and indicators).
- Brake system. It is equipped with a hydraulic booster, which contributes to better adhesion of the unit to the working surface.
- Loading mechanism necessary for transporting various goods.
- Wheel mechanism and tires.
- Attachments. It makes it possible to expand the range of technology functions. As additional equipment, you can use a snow blower, a special clamp for moving equipment, etc.
- Rechargeable batteries, which are responsible for the operation of all electrical systems of the vehicle.
- Operator's cabin equipped with a height-adjustable seat, ventilation system and instrument panel.
Line of skid steer loaders
The Mustang loader has several modifications:
Technical parameters of the Mustang-2012 transport:
| Maximum load capacity | 385 kg |
| Tipping load | 775 kg |
| Mustang mini loader motor model | Yanmar 3TNV82 BPMS |
| Type of fuel used | Diesel |
| Number of cylinders | 3 |
| Power unit power | 24.5 horsepower |
| Maximum driving speed | 8.9 km/h |
| Clearance | 150 mm |
| Wheelbase | 0.77 m |
| Maximum height of the working body suspension point | 2.44 m |
| Bucket lip reach | 376 mm |
| Fuel tank volume | 29 l |
| Unloading height | 1.84 m |
| Bucket lift height | 3.17 m |
| Tire size | 5,70*12 |
| Cutting edge width | 914 mm |
| Tilting angle of the working body | 46° |
| Hydraulic turning radius | 1097 mm |
| Driver's seat height | 879 mm |
| Rear overhang angle | 30° |
| Breakout force | 1010 kg |
| Hydraulic pressure | 175 Bar |
| Hydraulic pump element supply | 34 l per minute |
| Engine speed | 2400 rpm |
| Dimensions | 2.58*9.1*1.89 m |
| Diameter of cylindrical elements | 10 cm |
| Piston stroke | 10.5 cm |
| Cylinder arrangement | V-shaped |
| Cooling system type | Liquid |
| Weight | 1352 kg |
Technical characteristics of the mini loader 2054:
| Maximum lifting weight | 748 kg |
| Transport weight | 2758 kg |
| Tipping load | 1497 kg |
| Motor model | Yanmar 4TNV88-Tier III |
| Fuel type | Diesel |
| Engine power | 47 horsepower |
| Maximum crankshaft speed | 3000 rpm |
| Maximum movement speed | 10.9 km/h |
| Ground clearance distance | 19.7 cm |
| Wheelbase | 97.8 cm |
| Permissible height of the suspension point of the working unit | 2946 mm |
| Edge overhang | 610 mm |
| Fuel tank volume | 54.1 l |
| Unloading height | 2.33 m |
| Bucket lift height | 3721 mm |
| Tire size | 10.00-16.5 HD |
| Cutting type edge width | 1562 mm |
| Number of cylindrical elements | 4 |
| Hydraulic pressure | 207 Bar |
| Hydraulic system performance | 106 l per minute |
| Number of speed modes | 2 |
| Reverse | No |
| Breakout force | 2268 kg |
| Bucket tipping angle | 34° |
| Operating mechanism width | 1562 mm |
| Maximum rotation of the engine compartment | 1056 mm |
| Driver's seat height | 884 mm |
| Dimensions | 3188*1542*1973 mm |
Technical parameters of the Mustang-2076 front loader:
| The greatest weight of the lifted load | 998 kg |
| Power | 84 horsepower |
| Rated crankshaft speed | 2500 rpm |
| Power unit model | Yanmar 4TNV98T - Tier III |
| Highest speed | 19.8 km/h |
| Ground clearance | 20.3 cm |
| Tipping load | 1995 kg |
| Transport weight | 3393 kg |
| Wheelbase | 1080 mm |
| Dimensions | 3327*1753*2057 mm |
| The largest point of suspension of the bucket | 3124 mm |
| Edge overhang | 813 mm |
| Fuel container | 71.9 l |
| Engine displacement | 15 l |
| Unloading | At a height of 2375 mm |
| Lifting the working body | Up to 4115 mm |
| Tire size | 12.00*16.5 HD |
| Cutting edge width | 1778 mm |
| Unloading area | 0.81 m |
| Working mechanism separation angle | 28° |
| Bucket tipping | 37° |
| Bucket width | 1778 mm |
| Turning radius | 2083 mm |
| Turning radius without operating device | 1283 mm |
| Rear overhang angle | 26° |
| Hydraulic tank volume | 60 l |
| Number of gearbox speeds | 2 |
| Number of cylindrical elements | 4 |
| Cylinder diameter | 10 cm |
| Piston stroke of driving wheels | 9.5 cm |
| Average fuel consumption | 16 l |
Parameters and indicators of the Mustang-2086 mini loader:
| Maximum lifting weight | 1179 kg |
| Transport weight | 3583 kg |
| Tipping load | 2358 kg |
| Motor model | Yanmar 4TNV98T - Tier III |
| Fuel type | Diesel |
| Engine power | 84 horsepower |
| Maximum crankshaft speed | 2500 rpm |
| Maximum movement speed | 19.8 km/h |
| Ground clearance distance | 0.2 m |
| Wheelbase | 1229 mm |
| Permissible height of the suspension point of the working unit | 3.12 m |
| Edge overhang | 0.89 m |
| Fuel tank volume | 91 l |
| Unloading height | 2354 mm |
| Bucket lift height | 4275 mm |
| Tire size | 12.00-16.5 HD |
| Cutting type edge width | 1.88 m |
| Number of cylindrical elements | 4 |
| Hydraulic pressure | 207 Bar |
| Hydraulic system performance | 60 l per minute |
| Number of speed modes | 2 |
| Reverse | No |
| Breakout force | 2640 kg |
| Bucket tipping angle | 37° |
| Operating mechanism width | 1880 mm |
| Maximum rotation of the engine compartment | 1679 mm |
| Driver's seat height | 1067 mm |
| Dimensions | Height - 2.05 m Width - 1.75 m |
Prices and analogues
Average cost of the model range:
| 2012 | 2054 | 2076 | 2086 |
| 900,000 rub. | RUB 1,150,000 | RUB 1,300,000 | RUB 1,500,000 |
Analogs: Bobcat-S770, Mustang-3300V and Bobcat-S850.
Purpose
Mustang 2076 is a multifunctional device with a wide range of actions. Designed for a range of works related to loading, moving and unloading cargo containers - building materials, sand, gravel, concrete structures, garbage, clay and other bulk materials. The machine is in demand both in agriculture and municipal services (cleaning activities for clearing snow, debris, earth-moving operations, plowing, mowing grass, etc.), and in repair tasks - for example, when filling holes on the roadway. The equipment operates in open and closed warehouses, ports, airports and industrial areas, and due to its compact dimensions it has good maneuverability. This allows you to work in cramped conditions - indoors, where you have to go around obstacles. And thanks to the support of a wide list of attachments, the Mustang 2076 mini-loader can be recommended for all tasks for which it would be necessary to use bulky and clumsy narrow-profile equipment.
Mustang 3300V
- Load capacity – 1497 kg
- Power – 84 hp
- Weight – 4430 kg
- Bucket unloading height – 3332 mm
The Mustang 3300V mini loader is one of the largest, lifting and powerful units in its class. This machine is designed to solve a wide range of problems in production, construction, public utilities and gardening.
Mustang 3300V pricing is available upon request. Just fill out the form on the website - we will contact you shortly and provide the price for the selected model and all technical specifications.
Purchasing a Mustang 3300V mini loader along with a set of necessary attachments can significantly speed up all production processes and facilitate their execution.
Model characteristics:
| Operating weight | 4430 kg |
| Tipping load | 2994 kg*** |
| Rated load capacity | 1497 kg*** |
| Breakout force | 2950 kg |
| Hydraulic pump supply | 182/137 l/min |
| Hydraulic pressure | 207/207* bar |
| Hydraulic tank | 40 l |
| Max. Travel speed | 0-13 km/h |
| 2-speed option | 0-20 km/h |
| Standard bucket | 1880 mm/0.7 m 3 |
| Universal bucket | 1880 mm/0.85 m 3 |
| Light material bucket | 1880 mm/1.5 m 3 |
| 4369 mm | |
| B. Max. bucket hinge height when unloading | 3332 mm |
| C. Cabin height | 2085 mm |
| D. Ground clearance (between wheels) | 229 mm |
| E. Length with bucket | 3901 mm |
| F. Length without bucket | 3010 mm |
| G. Wheelbase | 1265 mm |
| H. Unloading area | 813 mm |
| I. Horizontal lift-off angle of the bucket | 29° |
| J. Bucket tipping angle | 42° |
| K. Width on standard wheels | 14.00×17.5=1829 mm |
| L. Standard bucket width | 1880 mm |
| M. Engine compartment turning radius | 1758 mm |
| N. Turning radius without bucket | 1430 mm |
| O. Turning radius with bucket | 2395 mm |
| P. Seat height | 1046 mm |
| Q. Bucket lift angle | 94° |
| R. Height of lowered bucket lip | 2504 mm |
| S. Rear overhang angle | 94° |
| ENGINE | |
| Manufacturer | YANMAR (Japan) |
| Fuel | diesel |
| Power | 84 hp/63 kW |
| At rpm | 2500 |
| Number of cylinders/volume | 4/3330 cm 3 |
| Fuel tank | 76 l |
| * Increased hydraulic power | |
| ***With counterweights |
Model features:
| CONTROL control levers and pedals control joystick control two levers |
ENGINE Engine automatic shutdown engine preheating engine Turbocharged engine
HYDRAULICS additional hydraulic outlet reinforced hydraulics (High-Flow) independent hydraulic tank
OPERATOR'S WORKSTATION air conditioning built-in cabin with heater control levers and pedals cabin heating sound signal soft armrests / seat belt ROPS/FOPS cabin noise reduction system adjustable seat stiffness (mechanically) front and rear work lights
| PRODUCTIVITY Multi-Tach ® system anti-vandal protection audible reverse signal brake control (auto/manual) Hydraglide™ system Hydraloc™ system hydrostatic drive Servo boom locking bucket correction system two speeds |
Description of the Mustang 3300V skid steer model
The universal mini-loader Mustang 3300V is one of the powerful representatives of mini-equipment in the Mustang model range. This skid steer and vertical lift machine is a true giant among skid steers.
Its characteristics are impressive: rated load capacity is 1497 kg and breakout force is 2950 kg. The car itself weighs 4430 kg. The loader engine has not undergone major changes compared to the previous model: it is a turbocharged diesel Yanmar (Japan) with a rated power of 84 hp.
The hydraulic system of the machine is of great interest. On new models, in addition to the two additional hydraulic lines in the front, a third drain line is used to bypass excess pressure during high flow.
The advantages of the Mustang 3300V skid steer are in great demand among construction workers. The height of the bucket hinge when unloading the machine is 3332 mm, which allows you to work with more powerful dump trucks, significantly increasing labor productivity. The boom, in turn, has a reinforced structure.
The productivity of the installed high-power “High Flow” system is 139.7 l/min. This indicator allows the Mustang 3300V to use even more productive attachments.
The 3300V control system allows the use of either joysticks only or joysticks with pedals. The model already has air conditioning and dual control joysticks as standard.
The Mustang 3300V skid steer has good stability, which is a big advantage for loading and unloading operations. The size of its wheels has been increased to 14x17.5, the ground clearance has increased, and the width of the car has increased to 1829 mm.
To make a final decision on purchasing a Mustang 3300V mini loader or to receive qualified technical advice, please write us a letter or call us or our toll-free hotline 8-800-250-45-59.
Device Features
- Large lifting capacity of the mounted implement due to the powerful hydraulic system. Also included as standard is a counterweight to improve stability when handling heavy loads. The best load capacity is also facilitated by a powerful diesel engine from Yanmar, which has high traction characteristics.
- High maneuverability and smooth running, as well as a maximum speed of 20 km/h. Compact dimensions make it possible not only to reduce the turning radius, but also to increase the demand for the machine in hard-to-reach places.
- A high-capacity cabin mounted to the frame on air suspension with a large shock-absorbing effect. In addition, the cabin is certified to ROPS and FOPS standards, which indicates a high level of sound insulation of the hood and interior. As a result, much less noise and vibration enters the cabin than in previous models. Thanks to this, the driver is not distracted from work, is less tired and is able to work longer.
- Built-in safety system consisting of operator weight sensors, instrumentation, and also includes a seat belt and seat frame. These components can be appreciated in critical situations such as rollover or overload.
- Hydraulic system for lifting working bodies in automatic mode. To service the hydraulic system, it is enough to change the oil. In addition, we note the Multi-Tach system, which allows you to work simultaneously with several mounted options.
- There is no need to look for a special place for refueling, or to change the battery, which might be required during multi-shift operation in the case of an electric forklift.
Mustang 3300V front loader
← sales, prices for Mustang front loaders in the commercial section
general information
about:
Mini loader Mustang 3300V with a lifting capacity of 1497 kg
Purpose
:
for work in various areas of the municipal, construction and road construction industries
Description of the mini loader and its unique characteristics:
The MUSTANG 3300V mini loader inherited the appearance and design from the MUSTANG 2700V model. The new cabin from 2700V is successfully used in the MUSTANG 3300V, the difference is that in the basic version the 3300V model has air conditioning and is controlled using double joysticks. Increased wheel size. more details
