Fuel consumption Urb 2a2 at Ural Base • Ural-4320 photo

Design features

When working to a depth of 200 meters or more, you cannot do without a large drilling rig. It is worth noting that large-sized installations can be stationary and mobile. Mobile units are installed on Kamaz or ZIL type vehicles, and their main advantage is that they are able to quickly change their location. However, drilling rigs of this size are more often used for exploration purposes and are capable of drilling a well up to 500 meters.

Tracked all-terrain vehicle URB 2A2 based on MTLB / MTLBu

MTLB is a lightweight, high-speed floating tracked chassis. Designed for delivering people and transporting goods in a closed heated body in off-road conditions, snow drifts, and marshy ground.

The MT-LB all-terrain vehicle, or multi-purpose light armored transporter, was adopted by the army in 1964. In Soviet times, the conveyor came out of the conveyors of the Kharkov Tractor Plant, where it is still produced. Separate developments based on MT-LB exist in Kazakhstan, Azerbaijan, Poland and Sweden.

Possibilities for use

The purpose of the tractor in the basic version (object 6) is to transport goods and people. When creating modifications, we proceeded from various military and civilian tasks. This tracked armored personnel carrier was successfully used in Afghanistan and later military conflicts, and was supplied abroad. Vehicles with weapons removed from the hull and specially manufactured for civilian needs were used as all-terrain vehicles. The peculiarity of MT-LB is the ability to create special equipment for various purposes on its basis:

• Snow and swamp-going vehicles and vehicles for mountainous terrain;
• Forest fire equipment;
• Aerial platforms;
• Radiation reconnaissance and technical assistance bases;
• Drilling, earth-moving and road-moving rigs;
• Medical, command and control posts;
• Equipment for performing military tasks.

Technical details

Depending on the modification, the conveyor is equipped with engines of different power, for example, YaMZ-238VM with 240 hp. With. or YaMZ-238BL-1 in 310 l. With. Transmissions, the number of rollers, the width of the tracks (and cross-country ability in different conditions), heating systems and other elements differ. Maximum speed is 60 km/h on asphalt roads and 6 km/h on water. Available with open and closed body. They can accommodate up to 20 passengers, with a total carrying capacity of up to 4.5 tons. If necessary, they can be supplemented with trailers with a total weight of up to 6.5 tons. The all-terrain vehicle is capable of moving over unstable soils and overcoming water obstacles.

Drilling and crane machine TAURUS 086A on a cabover chassis Ural 4320

Description

BKM TAURUS 086A based on the cabover Ural 4320 is intended for lifting, high-altitude, drilling operations, and cargo transportation.
This multifunctional special equipment will become an effective assistant for energy companies and enterprises that work in the field of installation, maintenance of power lines, and construction. It is equipped with advanced drilling equipment and has excellent driving characteristics. Equipment

The TAURUS 086A BKM on the Ural 4320 cabover chassis is equipped with:

1. Telescopic hydraulic lift equipped with a cradle for high-altitude work. Maximum lift 24.5 m.
2. A cargo platform with a side for transportation of cargo, construction materials and other things.
3. A crane-manipulator equipped with a hexagonal telescopic boom that allows 360° horizontal rotation. The maximum reach is 20.5 m. The boom sections are made of Posco steel. Loading capacity reaches eight tons.
4. Augertorgue drilling rig (Great Britain), allowing drilling up to 15 m deep. The diameter of the wells is from 0.15 to 1.2 m.

This special equipment will be indispensable for companies engaged in the construction of power lines, installation of communication lines, drilling, as well as road, construction, electrical and high-rise works.

Areas of application of BKM

Thanks to all-wheel drive, maneuverability and power of the URAL 4320 chassis, the TAURUS 086A BKM makes it easier and faster to get to those areas where travel is difficult due to the terrain.

The drilling and crane rig from South Korea TAURUS 086A performs various works, including:

• soil drilling;
• installation of wooden or reinforced concrete supports;
• cable tension;
• transportation of goods and building materials;
• lifting building materials to a given height;
• lifting workers for high-altitude and installation work.
• Features of special equipment allow loading and unloading without the use of other equipment

Version benefits

BKM TAURUS 086A - URAL 4320 is designed for drilling in soils of categories I - VI. The model is fully adapted for work in various climatic regions of Russia. This provides:

• possibility of drilling at different angles;
• availability of drilling multiple points from one machine position;
• possibility of drilling in hard-to-reach places;
• possibility of drilling in difficult terrains

Advantages of the model:

The BKM is equipped with hydraulic outrigger supports that keep it in a stable position even on specific landscapes, allowing it to perform drilling or crane work.

The mobility of the chassis helps deliver special equipment to remote areas, including construction sites located far from highways. When not in use, the telescopic boom does not protrude beyond the onboard platform.

Based on the chassis of the hoodless URAL 4320 BKM TAURUS 086A, it is suitable for operation in various Russian regions, including those with harsh climates. The special equipment is equipped with equipment capable of performing drilling work on soils of categories 1-6. Thanks to equipment from a leading English manufacturer, we provide:

• drilling work from different angles, in difficult areas and landscapes;
• drilling from several points without changing the position of special equipment and supports.

The cradle basket rises due to the efforts of a hydraulic lift and increases the functionality of special equipment, allowing for installation and high-altitude work.

Special equipment is equipped with control systems that increase work safety and prevent the occurrence of emergency situations.

Features of ordering and delivery

Our company provides clients with flexible payment options. When placing an order for a TAURUS 086A BKM on a Ural 4320 cabover chassis, half of the amount can be paid immediately, and the rest after delivery of the equipment to the site. You can also arrange the supply of special vehicles on lease. Choose a convenient cooperation option, and we will bring special equipment to your site. If you are interested in pickup, you can personally come to our warehouse and pick up the BKM.

Before providing special equipment to the customer, our company carries out the necessary pre-sale tests and tests. A complete package of documentation is drawn up, including a warranty card and a passport required for registration with Rostechnadzor authorities.

Contact our company

In order to get more information and order the BKM TAURUS 086A based on the cabover Ural 4320, choose a convenient way to fill out an application:

• on the official website of our company;
• by calling the hotline;
• by email.

In addition, you can contact managers using a suitable messenger: Telegram, WhatsApp or Viber. Contact us!

Drilling rig URB 2A-2 based on ZIL 131

In order for the specialist operator who is in the cabin of the URB 2A2 drilling rig to perform his work without leaving its confines, this equipment is controlled using special hydraulic equipment. TECHNICAL CHARACTERISTICS OF THE URB 2A2 INSTALLATION Conditional drilling depth, m structural exploration wells with flushing 350 geophysical wells with flushing 100 with flushing 50 augers 30 Initial diameter of drilling with flushing, mm 190 Final diameter of drilling with flushing, mm structural exploration wells 93 geophysical wells 1 18 Diameter of drilling with blowing, mm 118 Diameter of drilling with augers, mm 200 Rotation speed of the drill, s-1 0.45; 0.7; 1.0; 2.33; 3.75; 5.42 Maximum torque, N m 2000 Stroke of the rotator, mm 5150 Lifting speed of the drill bit, m s 0 1.25 Overall dimensions in transport position, mm, on the ZIL-131 Ural chassis 7850x2500x3300 8080x2500x3500 Overall dimensions in working position, mm on ZIL-131 Ural chassis 7850x2500x8200 8080x2500x8380 Installation weight, kg, on the ZIL-131 Ural chassis no more than 10 100 13 800.

Drilling rig URB-3A3M Ural 4320-1912-60E5

The URB-3A3M installation is a modern complex of drilling equipment that includes a mobile drilling rig on a Ural chassis and a drilling fluid supply complex.

The drive of the working parts of the drilling rig is carried out using a diesel engine of the base chassis. Using a cardan shaft, a transfer case is connected to the power take-off, on which hydraulic pumps and a pulley for connecting additional gear are installed. equipment. The pump unit is responsible for supplying hydraulic fluid to the working parts of the URB-3A3M (rotator, rotator feed/lift hydraulic cylinders, mast lifting cylinders, outriggers, hydraulic winch). Drilling is controlled from a control panel, which consists of hydraulic valves, a working fluid flow regulator, valves, and pressure gauges. The drilling fluid supply complex is installed on the platform and consists of an NB-50 mud pump.

The rods are lifted/changed/winded using a reinforced swivel.

To ensure the lifting capacity of the winch, the mast of the drilling rig was strengthened, additional outriggers were installed to provide the necessary load without transferring force to the frame of the supporting machine.

Drilling and crane machine URAL-4320 with BCU HTMI-086A Price and configuration

URB 2A2 drilling rig on Ural 4320-61 chassis with KV-12/12S compressor

Using the URB-2A2 drilling rig, water intake, blasting, geophysical and prospecting wells are drilled, and mineral exploration work is carried out.

With this installation you can perform rotary drilling:

1. With flushing.
2. With purging.
3. Screw dry.

The installation includes a KV-12/12S compressor, with which the drilling rig is provided with compressed air to carry out the necessary work. The tests carried out made it possible to clearly demonstrate the high efficiency of the compressor unit - the performance indicators of drilling and blasting operations doubled.

The installation is based on the Ural 4320-61 chassis and is driven by the truck’s power unit.

For comfortable and safe work of the driller, a control panel is provided, on which control devices and the necessary regulators are located:

• Bottom-hole stress.
• Feed speed.
• Ascent speed.
• Rotator spindle speed.

The equipment is automated and equipped with a sensor system that ensures high performance without interruptions when temperatures drop.

The URB on the Ural 4320-61 chassis with the KV-12/12S compressor has the following equipment:

• Electrical equipment for monitoring vehicle operating parameters;
• Frame for installing a KAMAZ chassis with a platform length of 6-6.2 m;
• Front mast support;
• Transfer case;
• Yoke and pulley assembled and ready for use;
• Cylinder for controlling the position of the mast;
• MG112/32M3 pump and oil tank;
• Check valves made in Italy;
• Piping for hydraulic system;
• Two-way ball valve;
• Three-way diverter;
• Control box assembled;
• Mast assembly;
• Equipment for adjusting fuel consumption;
• Hydraulic jack;
• Assembled carriage;
• Main and auxiliary rollers for the carriage;
• Travel system;
• Assembled rotator. Operation at speeds from 2000 to 4000 is allowed; performance can be achieved by sequential or parallel activation of hydraulic motors in the system.
• Mudguards, rig guards and support jacks;
• Oil seals;
• Elevator assembled;
• Motor pump MG112/32M;
• Centralizers models 2D3-35.09 and 2-23-71;
• Breaker wrench "seven";
• Compressor from the Chelyabinsk plant ChKZ model KV-12/12S. Compressor capacity is 12.0 m3 per minute, operates on a YaMZ drive;
• Additional fuel tank for long-term operation of the car without refueling;
• Pre-heating system;
• Drilling rig pipelines;
• Pipeline control system built into the driller's console;
• Additional valve for blowing the platform;
• Mud pump NB-50 with a diameter of sleeves and pistons from 90 to 120 mm, depending on the customer’s needs.

Features of drilling rigs based on the Ural

The main feature of these units is the Ural-4320 car, which began to be produced by the Ural Automobile Plant (Miass) back in 1977. Initially, this vehicle was created for army purposes, where it is still used as a unified military vehicle.

The capabilities of the Ural are unique for a wheeled truck: having a payload capacity of about 12 tons and a speed of up to 85 km/h, it can freely overcome climbs with an inclination angle of up to 600, ditches up to 2 meters deep, river fords up to 1, 5 meters deep. All this has become truly achievable thanks to the design features:

1. Powerful diesel engines KamAZ-740 (209 hp), YaMZ-236 (210 hp) or YaMZ-238 (230 hp).
2. Torque, reaching a maximum value of up to 673 N*m.
3. All-wheel drive on a wheelbase with a 6*6 installation pattern.
4. Ground clearance up to 400 mm wide.
5. A reliable hydraulic system that transmits movement to all additional equipment.

Photo of the URAL-4320 car with a drilling rig

Drilling rigs based on Ural are becoming the best choice for carrying out work in remote areas and hard-to-reach places, where the delivery of drilling equipment is associated with problems of rough terrain and off-road conditions. Wooded or swampy areas, as well as small ravines, will not become an obstacle for search engines and surveyors working on them.

INTERESTING! The Ural-4320 was able to become the basis for the drilling rig due to the structure of the platform, which is used as a universal vehicle for all types of cargo - from high-tonnage building materials to passenger transportation.

Tractor hole drill on tracks and wheels

Tractor hole drills are used in various industries, such as public utilities or agriculture, construction and in the installation of power lines.
Can be used universally with a wide chain of mounted drilling equipment. The selection of equipment is carried out for any task, using the development of successfully operated models of hole drills based on tracked and wheeled tractors. All drilling rigs are special in their design. The use of some types is multifunctional and possible on any soil, although there are also models with restrictions in operation. Tractor-based hole drills are used for drilling relatively small wells, up to 3 meters deep, using a telescopic or extendable drill. A crawler hole drill is a more powerful installation that is used when drilling wells, installing piles and bridge supports. Increased functionality can be achieved with the help of additional equipment - a winch, dumps and a brush for cleaning after dry drilling.