TRUCK CRANE LIEBHERR LTM 1070technical characteristics

Maximum load capacity 70 tons with reach 2.5 m

Telescopic boom
11 - 50 m
Boom extension (jib)
9.5 - 16 m
Engine/power Liebherr engine / 270 kW

Drive / steering
8 x 6 x 8
Travel speed 80 km/h

Weight in transport position
48 t
Total counterweight weight
14.5 t
The safety system is equipped with a load limiter LICCON - 2, a system for testing the performance of working units, safety and shut-off hydraulic valves in case of rupture of hydraulic lines.

Active steering on all axles provides maximum maneuverability and allows you to work in the most limited conditions using a diagonal movement system.

Truck crane 70 t, boom 50 m

Rent a 70 ton Liebherr LTM-1070 truck crane to solve complex problems.

The longer the line of truck cranes of various lifting capacities, the easier it is for builders to choose equipment that best suits the tasks it will have to perform on site, taking into account the weight of the load, the required lifting height and the required distance for movement. Convenient for customers, a wide range of truck cranes is offered by the German company. This is especially true for lifting mechanisms with high lifting capacity and, in particular, for such in-demand equipment as a 70-ton truck crane, which performs work that is beyond the capabilities of a crane with a lifting capacity of 50 tons and is more economical than a 90-ton crane.

Liebherr 1070: good maneuverability with high power

• length in transport position – 12520 mm;
• height – 3950 mm;
• width – 2690 mm,

and the minimum turning radius of just 8.17 m, achieved through the 8x6x8 wheel arrangement and active rear axle steering, enable this lifting mechanism to reach construction sites even in cramped urban conditions. At the same time, a relatively small axle load (12 tons), a diesel engine with a power of 270 kW, as well as a speed of up to 80 km/h, allow us to say that renting a 70-ton truck crane can also be profitable for builders of objects located remotely from city ​​sites with dirt access roads.

Liebherr 1070 mobile crane: excellent lifting characteristics

• with a boom length of 11.0 m, lift a load weighing 70 tons to a height of 10.0 m with a reach of 2.2 m, and at maximum reach - 12.0 m, a load weighing 13.4 tons to a height of 4.0 m;
• with a boom length of 50.0 m and a reach of 9.0 m, the load weight can reach 6.7 tons, and at the maximum possible reach - 40.0 m, a 70 t crane lifts 0.9 tons to a height of 27.0 m;
• lift a load weighing 6.7 tons to a height of 49.0 m, with a boom length of 50.0 m and an outreach of 9.0 m, and at a maximum outreach of a boom length of 43.3 m, equal to 40.0 m, a 70 t crane is capable of lifting 1.2 tons to a height of 10.0 m.

Technical characteristics of the Liebherr LTM 1070 truck crane - 4.2 lifting capacity 70 tons

Overall dimensions of the Liebherr LTM 1070 70 ton truck crane

Load-height characteristics of the Liebherr LTM 1070 70 ton truck crane

Technical capabilities of the Liebherr LTM crane (100 tons)

An integral part of construction, search and rescue and industrial work is the Liebherr 100 ton crane. The load capacity indicators allow this machine to be used in many professional industries that require the use of heavy-duty special equipment.

Areas of use of a truck crane

The largest truck crane in the world is the brainchild of German manufacturers, and loudly declared itself in 2007, when it was included in the Guinness Book of Records. The Liebherr truck crane belongs to the Liebherr-International AG concern and is named after its founder Hans Liebherr.

The power of the lift is given not only by its dimensions and appearance, but also by the eight-section boom with telescopic blocks. The Liebherr LTM 1100 truck crane is used in many areas; it is used to carry out:

Liebherr LTM 1100 truck crane in operation

• repair and restoration work;
• construction;
• cargo transportation;
• loading and unloading large cargo;
• housing and communal works;
• ensuring emergency and fire safety;
• clearing away rubble.

Large organizations whose activities are related to production or industry use a truck crane of this model in logistics systems, where wide opportunities open up for unlocking its potential.

Liebherr is often used by special units of the Ministry of Emergency Situations of the Russian Federation to rescue citizens and clear landslides and heavy piles.

Liebherr crane design

The technical characteristics of the Liebherr 100 ton make it stand out from other mobile cranes. The basis of the model is an all-terrain four-wheel chassis, the drive of which has 8x8x8 dimensions.

The pride of this piece of special equipment is a 60-meter telescopic boom with 7 sections.

The boom is designed to lift loads with a tonnage of up to 100 tons, while the boom reach can reach three meters relative to the axis of rotation.

Liebherr LTM 1100 truck crane

The Liebherr LTM crane design includes:

• turbodiesel engines with the least amount of toxic emissions;
• chassis with a six-cylinder diesel engine and automatic transmission, with three main and one additional drive axle;
• separate cabins for the operator and driver, which, in turn, simplifies the control process;
• pneumatic disc brakes;
• a safety system based on a number of safety valves, brakes and limiters.

Liebherr crane 70 tons technical specifications

3. A 70 ton Liebherr truck crane allows you to work with loads with boom outreaches of up to 38 meters, and when using a jib, a 70 ton truck crane has a reach of up to 46 meters.

4. The maximum lifting height of the 70 ton crane Liebherr LTM 1070 on the main boom is 42 meters, with a jib - 60 meters.

5. Dimensions of the 70 t crane Liebherr LTM 1070 in transport position are: 12880x2700x3900.

The diagram of the lifting characteristics of the 70 ton Liebherr LTM 1070 truck crane shows the lifting capacity values ​​​​at various positions and boom radii.

The overall dimensions diagram shows the dimensions of the 70 ton Liebherr LTM 1070 truck crane in transport and working positions.

1.Maximum lifting capacity 70 tons at 3 m radius

Technical dimensions:

Loading characteristics:

Rent price:

Additional Information:

Cost 7000 rub./hour incl. VAT. The minimum shift for a truck crane is 4 hours.

You can order a Liebherr LTM 1070 truck crane with a lifting capacity of 70 tons by calling:

8(987) 158 -55-57 ( 7 00 — 18 0 0 ) Main office: rental of truck crane and special equipment

8(927) 712 -60-01 (7 00 - 18 0 0) rental of special equipment and transport

e-mail: This email address is being protected from spambots. You must have JavaScript enabled to view it.

TransSpetsNaz Group of Companies

» Rent a Liebherr LTM-1070 truck crane

Shift cost in Moscow: 4500 rub./hour (for long-term rental from 5% to 40%)

To ORDER call

Quick order

provides services for short-term or long-term rental of Liebherr truck cranes with a lifting capacity of 70 tons.

Areas of application

Renting a 70 ton truck crane is an ideal option for working in urban environments. The 70-tonne Liebherr can handle loads over a wide range of weights and lift heights. Thanks to the large telescopic boom, this model can be used to supply building materials and structures into open openings or carry out complex installation of production equipment with its help.

Rent a Liebherr LTM 1070 70 ton truck crane

MINIMUM ORDER OF EQUIPMENT – 1 WORK SHIFT (7+1 HOURS)

We offer rental of Liebherr ltm 1070 for 70 tons. It is equipped with a 5-section telescopic boom, the length reaches 42 m. The length can be increased by adding a lattice jib to the package, then the lifting height will reach 60 m.

The 70 ton crane is used for:

• installation of machines, production complexes and other large equipment;
• lifting structures to a height;
• supply of building materials, including reinforced concrete products.

The Liebherr 1070 truck crane is special equipment for fast and mobile work on lifting loads. Reliable in operation and works in small areas.

We deliver special equipment to the site ready for work.

Liebherr 1070 at 70 t is characterized by:

• small support base;
• support extension up to 7 m;
• electronic control system.

All models of Liebherr truck cranes

Truck cranes from this manufacturer are conventionally divided into several categories depending on their lifting capacity (indicated in tons). In turn, in each category there are several models that differ in additional functions, capabilities and characteristics. During construction, we recommend renting a Liebherr crane. This is much more profitable than buying it.

Truck cranes 40 tons

There are three crane models in this category:

1. LTM 1030-2.1. The equipment is equipped with a boom with a reach of up to three meters, with the ability to lift loads weighing up to 35 tons to a maximum height of up to thirty meters. An additional jib allows you to increase the range of the equipment to 15 meters.
2. LTM 1040-2.1. Compared to the previous model, the boom reach has decreased by 30 centimeters, and the load capacity has increased by five tons. The maximum lifting height provided by the telescopic boom is 35 meters. The jib allows you to increase this figure by another 9.5 meters.
3. LTM 1045-3.1. The boom reach reaches three meters, the lifting capacity of the equipment reaches 45 tons to a height of up to 34 meters. If necessary, the boom length can be increased by 16 meters due to the jib.

All three models are equipped with units of the company's own production and run on engines manufactured by Daimler-Benz.

Truck cranes 50 tons

This type of equipment is represented by only two models: LTM 1050-3.1 and LTM 1055-3.1. The first has a larger boom reach (three meters), but the crane’s lifting capacity is limited to 50 tons. The second boom reaches 2.5 meters, while the maximum weight available for lifting is 55 tons.

The LTM 1050-3.1 and LTM 1055-3.1 are capable of lifting loads to a maximum height of 38 and 40 meters respectively. The jib for extending the boom is the same for both models and increases the radius of the boom by 16 meters.

Truck crane 70 tons

The only “representative” of this category is the LTM 1070-4.1 self-propelled truck crane. The boom of the equipment extends to a distance of 11 to 50 meters; to further increase the reach, a lattice extension is used, allowing it to be increased by 16 meters. With a boom reach of two and a half meters, the crane’s lifting capacity is up to 70 tons.

Liebherr truck crane 100 tons

The largest category, which includes six cars:

1. LTM 1090-4.1. The lifting capacity of this crane, equipped with two engines, is up to 90 tons with a boom reach of 2.5 meters. Loads can be lifted to a height of up to 50 meters thanks to the telescopic boom design. The length of the base of the lifting element allows you to increase the working distance of the boom from 10.5 to 26 meters.
2. LTM 1095-5.1. It has the longest boom in this category (the length of the working element is 58 meters). The crane can lift loads weighing up to 95 tons, including when using a lattice-type extension, which allows you to increase the radius of the boom by a maximum of 26 meters.
3. LTM 1100-4.1. This is the most powerful machine not only in the category, but in the entire Liebherr “line”. The boom reach is 2.5 meters with a lifting capacity of 100 tons. Additionally, the equipment is equipped with an extension 10.8-33 meters and a telescopic boom (length from 11.5 to 52 meters).
4. LTM 1100-5.2. The machine, with the ability to actively control axles and a lifting capacity of 100 tons with a 2.7-meter boom reach, is one of the smallest models from this manufacturer. The delivery set includes a telescopic boom and an extension, the length of which is 11.5-52 and 10.8-33 meters, respectively.
5. LTM 1130-5.1. The boom reach of the machine is three meters. The telescopic boom allows you to reach a distance from the base to the load from 12.7 to 60 meters. The maximum lifting height of loads can vary from 10.8 to 33 meters due to the presence of an additional jib. The crane's lifting capacity is 130 tons.
6. LTM 1160-5.1. The most powerful machine in this category (load capacity 160 tons). The basic boom reach is three meters; when using an additional telescopic boom, the distance increases to 62 meters. The jib allows you to lift loads to a height of up to 43 meters.

Truck cranes 200 tons

There are three types of equipment in this category:

1. LTM 1200-5.1. The boom reach is three meters, the telescopic element allows you to increase this figure by 13.2 to 72 meters, the use of a jib makes it possible to lift loads to a height of 5.4-43 meters. The carrying capacity of the machine is 200 tons.
2. LTM 1220-5.2. With a lifting capacity of 220 tons, the crane can lift loads to heights from 12.2 to 43 meters thanks to the extension. The boom length can vary between 13.3-60 meters thanks to the telescopic design. The boom reach is three meters.
3. LTM 1250-6.1. The boom reach of the equipment is three meters. The lifting height is up to 72 meters. The length of the boom when installing a telescopic extension increases to 70 meters. The maximum possible load weight for this truck crane is 250 tons.

Truck cranes 300-500 tons

1. LTM 1300-6.1. The truck crane can lift loads weighing up to 300 tons. The boom radius is three meters, its length ranges from 15 to 60 meters. When using an extension cord, the maximum height of the load will be 70 meters.
2. LTM 1400-7.1. With a three-meter boom reach, the equipment can lift loads weighing up to 400 tons. The telescopic boom extends to a distance of 15.4 to 60 meters. The kit also includes a lattice-type extension cord, the length of which can range from 7 to 84 meters.
3. LTM 1500-8.1. The machine with the longest boom not only in the “line”, but also in comparison with all other truck cranes that are produced in the world (in this category). The lifting height of the load is 84 meters. If it is necessary to lift to a greater height, a telescopic extension can be used (the total length of the boom will be 91 meters). Maximum load capacity – 500 tons.

Advantages of renting a Liebherr LTM 1070 crane from StroyTekhMash?

By ordering Liebherr crane services, the customer receives:

• equipment ready for use;
• vehicles that have passed technical inspections and are registered with Rostekhnadzor;
• experienced drivers who professionally operate special equipment;
• delivery to the site;
• maintenance and repair work in case of breakdown at the facility;
• availability of required documents.

Cooperation with StroyTekhMash means saving time and money!