The Hitachi ZX 210 excavator belongs to the category of medium-power tractors.
It is part of a group of models with a lifting capacity of 6-40 tons. For such excavators, the manufacturer uses specialized chassis that are distinguished by significant strength. Typically, these machines are used in harsh weather conditions, so they need mobility, safety, stability and sufficient power to operate smoothly. Hitachi ZX 210 is designed to perform a variety of operations. In the basic configuration, the model is suitable for digging holes, leveling slopes and relief soil surfaces (soils of categories I-IV, pre-loosened rocky and frozen soils). When equipped with a hydraulic hammer, special equipment is again used for the destruction and dismantling of buildings and various concrete structures. The machine is functionally equipped with a variety of interchangeable attachments, which increase its versatility and make it truly multifunctional.
Exploitation
Working weight | 19900 kg |
Fuel volume | 360 l. |
Coolant volume | 23 l. |
Hydraulic fluid volume | 200 l. |
Engine oil capacity | 25 l. |
Boom extension drive fluid volume | 6.2 l. |
Operating voltage | 24 V |
Generator current | 50 amps |
Hydraulic Bypass Valve Pressure | 34335.9 kPa |
Hydraulic pump capacity | 388 l/min |
This is interesting: Crane RDK 25, 250, 500 - technical characteristics of a crawler crane. Decoding RDK
Video
To minimize the risk of unexpected accidents, the model is equipped with a specialized operator cabin with a reinforced structure. The attachment point of the bucket and the excavator arm is additionally reinforced with tungsten alloy, which ensures the strength of the elements during regular use.
Hitachi ZX 210 is offered in a variety of versions (track and wheelbase). The model on wheels has a significant speed of movement and allows you to maintain stability when performing operations. No additional transport is required to deliver this variation. In most cases, the wheeled version is easier to overcome obstacles. However, with a heavy mass it is more difficult for her to move and work. The tracked version has greater cross-country ability and maneuverability. The consumer has the right to choose the modification that is optimally suitable for him.
This excavator is characterized by high performance characteristics (bucket capacity up to 1.2 cubic meters and digging depth up to 5.8 m). Such parameters coupled with high power make the Hitachi ZX 210 one of the most productive models.
The main advantages of the model:
- improved technical performance;
- low vibration while driving.
- wheels for the wheeled version of the excavator were developed jointly with Bridgestone specialists and received excellent reviews;
- increased acceleration speed;
- fuel consumption decreased by 17%;
- the ability to work with large loads by increasing the width of the frame elements and strengthening the boom.
The Hitachi ZX 210 has been around for quite some time and does its job well. The latest technologies used in the development of this model have made it more productive and simplified operation. Now this excavator is one of the most popular products of the brand.
Characteristics of booms/sections 2
Maximum digging depth | 6670 mm |
Maximum reach along ground level | 9750 mm |
Maximum cutting height | 9600 mm |
Maximum loading height | 6780 mm |
Maximum digging depth of vertical wall | 6050 mm |
Transport height of the block | 2970 mm |
Transport length of the block | 9500 mm |
Hitachi ZX210LCN-G Specifications:
Engine | Isuzu AA-6BG1T |
Rated power (ISO 9249) | 110 kW |
Maximum torque | 550 Nm |
Maximum hydraulic flow | 2x194 l/min |
Max. control circuit pump capacity | 32 l/min |
Main safety valve setting pressure | 34.3 MPa |
Pressure in Power Boost mode | 36.3 MPa |
Platform turning speed | 13.3 rpm |
Movement speed (high/low) | 5.5/3.6 km/h |
Operating weight | 20800 kg |
Ground pressure | 52 Kpa |
Handle length | 2.91 m |
Maximum digging depth | 6670 mm |
Maximum digging radius | 9920 mm |
Maximum digging height | 9610 mm |
Maximum unloading height | 6780 mm |
Minimum turning radius | 3490 mm |
Bucket capacity with cap, ISO | 0.8-1.1 m3 |
Bucket cutting force, ISO | 151 kN |
Overall width | 2500 mm |
Max. overall height | 2970 mm |
Track Shoe Width | 500 mm |
Minimum ground clearance | 450 mm |
Rear turning radius | 2750 mm |
Find any equipment - free and fast!
Place a request for equipment and sellers will contact you
Place a request
I accept the terms of the agreement
- Hitachi ZX210LCN-G crawler excavators for sale in Moscow
- Sale of HITACHI crawler excavators in St. Petersburg
- Rent of crawler excavators in Moscow
- Rent of crawler excavators in St. Petersburg
trade offers
Sale:
- Crawler excavators
- HITACHI crawler excavators
- Hitachi ZX210LCN-G
View more
Hide
Rent:
- Crawler excavators
- HITACHI crawler excavators
All information is taken from public sources
Please rate this article: Rated: 7, rating: 3.86 out of 5
Your opinion is very important to us
The technical characteristics of the equipment in the catalog are based on information taken from official sources, including the official websites of manufacturers.
Unfortunately, even official documents may contain errors and typos. In addition, specifications may differ depending on the region where the equipment is supplied, and may also be changed by manufacturers without prior notice.
Our projects:
- Freight Ru
- MAXI Excavator Ru
- MINI Excavator Ru
- Technover Ru
- Dorkomtekh Ru
- Autoloader Ru
- Place an advertisment
- Advertising
- 广告
Write to us
Excavator Ru is the leading portal about construction machinery and equipment on the Russian-language Internet.
- Moscow
- Moscow region
- Saint Petersburg
- Leningrad region
- Novosibirsk
- Ekaterinburg
- Nizhny Novgorod
- Kazan
- Chelyabinsk
- Omsk
- Samara
- Rostov-on-Don
- Ufa
- Krasnoyarsk
- Permian
- Voronezh
- Volgograd
- Krasnodar
- Saratov
- Tyumen
© Excavator Ru 2003—2020 User Agreement Privacy Policy Help Questions and Answers Offer Agreement
This is interesting: Kranex is a crawler excavator; models: Kranex EK 270 excavator and its technical characteristics
Dimensions of Hitachi ZX210LCH excavator
Characteristic | ZAXIS 210LCH | |
A | Machine base | 3660 mm (12'0″) |
B | Undercarriage length | 4460 mm (14'8″) |
*C | Height from ground level to counterweight | 1030 mm (3'5″) |
D | Radius of rotation along the machine body | 2750 mm (9'0″) |
D' | Distance from center of rotation to rear counterweight point | 2750 mm (9'0″) |
E | Overall turning width | 2710 mm (8'11") |
F | Overall cabin height | 2950 mm (9'8″) |
*G | Minimum ground clearance | 450 mm (1'6″) |
H | Track center distance | 2390 mm (7'10") |
I | Track Shoe Width | G 600 mm(24″) |
J | Undercarriage width | 2990 mm (9'10") |
K | Overall machine width | 2990 mm (9'10") |
L | Machine length with handle 2.91 m (9'7″) | ** 9500 mm (31'2″) |
M | Boom height with stick 2.91 m (9'7″) | ** 2970 mm (9'9″) |
N | Track height with triple grouser shoe | 900 mm (2'11") |
* — Excluding shoe lug.
** — Equipped with working equipment H.
G - Triple lug shoe.
Features and Benefits
The excavator base can be wheeled or tracked. The wheel travel is characterized by high speed and gives stability to the machine during operation. Another positive point is that there is no need to transport the Hitachi 210 excavator to the work site using other transport equipment. Unfavorable site conditions are not an obstacle for the vehicle and do not reduce its maneuverability. With a large mass, the equipment loses some of its maneuverability and maneuverability. These figures are higher for a tracked vehicle. The manufacturer gives you the opportunity to purchase any configuration option.
Hitachi ZX 210 excavator. Photo
The performance of an excavator is explained by technical indicators - bucket capacity and digging depth. Power plays an important role.
The advantages of the Hitachi ZX 210 include:
- high performance characteristics;
- reduced vibration levels when moving equipment;
- chassis of improved quality (Bridgestone employees participated in the development, so the tires are thought out to the smallest detail and deserve special praise);
- reducing the time to accelerate to the required speed;
- reduction in fuel consumption by more than 15%;
- the width of the supporting frame has become slightly larger, due to which the load capacity has increased;
- The reinforced handle also had a positive effect on increasing the load capacity.
Every year the excavator becomes more and more advanced due to the use of new technologies and modern design solutions. These innovations make it possible to increase its technical indicators, for example, productivity and load capacity. Also, the design features allow for maintenance without much time and effort. The popularity of Hitachi 210 has been growing in recent years due to improved technology.
Return to navigation
Technical characteristics and dimensions
Dimensions of Hitachi ZX 210 wheeled excavator
Technical characteristics of Hitachi 210:
Parameter | Meaning |
unloading height | 7-7.35 m; |
digging depth | 5.8-6.29 m; |
maximum digging radius | 9.67-10.17 m; |
digging height | 9.84-10.19 m; |
maximum reach | 9.46-9.96 m; |
digging force | 151 kN; |
vehicle weight | 19.8-20.9 t; |
travel speed | 2.9-27.5 km/h; |
maximum slope of the working platform | 35 degrees; |
bucket volume | 0.51-1.1 m3 (standard equipment - “backhoe”); |
cutting edge width | 0.72-1.46 m. |
The dimensions of the machine are 9.7-9.85 m in length, 3.44 m in width and 3.17-3.23 m in length. The ground clearance of the excavator is 0.325 m, and the length of the wheelbase is 2.75 m (on tracks).
The fuel consumption of the Hitachi ZX 210 is 13.5 l/hour , and the volume of the diesel fuel tank is 355 l.
Return to navigation
Hitachi ZX210LCH excavator rotary platform
Rotating frame
Robust welded construction provides increased machine durability. Reinforced
D-shaped
The frame protects the turntable from deformation.
Rotation mechanism
Axial piston hydraulic motor with planetary gearbox. The turntable is equipped with a single row ball bearing and an internal toothed gear. The gear drive operates in an oil bath. Parking brake rotating
platforms -
hydromechanical, disk type.
Turning speed, rpm | 13,3 |
Operator's cabin
The spacious cabin, 1005 mm wide and 1675 mm high, complies with ISO standards. Tempered glass provides all-round visibility. The front windows (upper and lower) can be opened. The seats are equipped with armrests, have longitudinal adjustment (can be moved with or without control joysticks) and a reclining backrest.
Hitachi ZX210 LCN G crawler excavator in Yekaterinburg and Moscow
Hitachi ZX210 LCN G crawler excavator
Engine and hydraulic system parameters | ||
Engine | Isuzu AA-6BG1T | |
Environmental standard | Tier2 | |
Rated power (ISO 9249) | kW/hp | 110 / 147 |
at rpm | 2 100 | |
Maximum torque | Nm/kgf-m | 550 / 56 |
at rpm | 1 600 | |
Maximum hydraulic flow | l/min | 2 x 194 |
Maximum control pump performance | l/min | 32 |
Main safety valve setting pressure | MPa/kgf/cm2 | 34,3 / 350 |
Pressure in Power Boost mode | MPa/kgf/cm2 | 36,3 / 370 |
Platform turning speed | rpm | 13,3 |
Movement speed (high/low) | km/hour | 5,5 / 3,6 |
Operating weight and ground pressure | ||
Operating weight | kg | 20 800 |
Ground pressure | kPa (kgf/cm2) | 52 (0,53) |
Operating Parameters | ||
Handle type | standard | |
Handle length | m | 2,91 |
Maximum digging depth | mm | 6 670 |
Maximum digging radius | mm | 9 920 |
Maximum digging height | mm | 9 610 |
Maximum unloading height | mm | 6 780 |
Minimum turning radius | mm | 3 490 |
Capacity of bucket with cap, ISO | m3 | 0,80 — 1,10 |
Bucket cutting force, ISO | kN/kgf | 151 / 15 400 |
DIMENSIONS | ||
Overall width | mm | 2 500 |
Max. overall height | mm | 2 970 |
Track Shoe Width | mm | 500 |
Minimum ground clearance | mm | 450 |
Rear turning radius | mm | 2 750 |
Medium-class crawler excavator ZX210LCN-G: model features
The hydraulic crawler excavator ZX210LCN-G is the first dimensional representative of its class. The machine belongs to the middle class of Hitachi excavators. The overall width of the ZAXIS210LCN is 2500 mm, which greatly simplifies its transportation. At the same time, the excavator’s performance is similar to the wider ZX200-5G model with a bucket of the same capacity and less pressure on the ground.
Durability of Hitachi ZX210LCN-G
The tensioning mechanisms absorb part of the dynamic load on the front rollers. The Hitachi 210 frame is made of solid steel plates. The wear resistance of working equipment has been increased due to thermal spraying of a hard coating on the contact surfaces of the hinges, as well as the introduction of grease-filled bushings into the design. The mechanical engine speed controller is not clogged with dust from the air.
Performance Hitachi ZX210LCN-G
Automated control of engine operation (with the appropriate mode active) depending on the load on earth-moving equipment, as well as at idle. Automatic control of the hydraulic system is implemented depending on the engine speed. These measures can significantly reduce fuel consumption without loss of performance. The ZX210LCN can be operated in three modes: high (H/P), normal (P) power, and economical (E) mode. When the latter is activated, the soil cutting force remains the same as in normal power mode.
Comfort Hitachi ZX210LCN-G
The ease of operation of ZAXIS210 meets Hitachi standards. The ergonomic arrangement of levers, switches, control indicators, a comfortable soft chair, and climate control equipment allow the operator to avoid overwork even during long and intense work.
Ease of maintenance Hitachi ZX210LCN-G
The service life of all consumables, parts, and filters has been increased to extend service intervals. Units in need of maintenance are freely accessible.
Hitachi ZX210LCN-G configurations
The ZAXIS210 provides for the installation of various equipment: a hydraulic hammer, a chopper, and buckets of different capacities.
Hitachi ZX210 LCN G crawler excavator is supplied to Ekaterinburg, Moscow, Khanty-Mansi Autonomous Okrug, Yamal-Nenets Autonomous Okrug
is a reliable supplier of special equipment on the Russian market, supplying special equipment, including the Hitachi ZX210 LCN G crawler excavator, since 2007 to the cities of Moscow, St. Petersburg, Novosibirsk, Yekaterinburg, Surgut, Khanty-Mansiysk, Salekhard and other cities of Moscow Region, Khanty-Mansi Autonomous Okrug , Yamalo-Nenets Autonomous Okrug .
Hitachi ZX210LCH excavator chassis
Caterpillar
The welded track frame is made of especially strong steel. The track frames are welded to the main frame. The internally lubricated rollers, idlers and sprockets are protected by floating seals.
Main type of crawler
shoes -
with triple grouser. Flat and triangular profile shoes are also used. The track chain connecting pins are heat treated and equipped with a dust seal. The hydraulic track tensioner is equipped with a spring shock absorber.
Number of rollers and shoes on each side
Support rollers | 2 |
Track rollers | 8 |
Track shoes | 49 |
Track protection | 2 |
The ZAXIS210LCH modification is equipped with enhanced track protection (H).
Travel mechanism
Each track is controlled
2 speed
axial piston
hydraulic motor through a planetary gearbox, which ensures reverse movement of the tracks. The drive wheels of the left and right sides are interchangeable. Parking brake mechanisms
progress -
hydromechanical, disk type. A safety valve built into the travel motor protects against water hammer when stopping. Automatic transmission with selectable speed (high or low).
Travel speed, km/h | high | from 0 to 5.5 |
low | from 0 to 3.6 | |
Maximum traction force, kN | 184 | |
Maximum climbable grade, degrees. (%) | 35° (70%) |
Features of the Hitachi ZX210LCH excavator
A standard excavator, modernized for work in difficult conditions with a reinforced chassis and working equipment, with an extended base. A reinforced track frame and improved wear resistance enable the H-Series to handle demanding applications.
Differences from the standard Hitachi ZAXIS 200 excavator:
- Extended crawler, 8 road wheels instead of 7.
- The front section is reinforced with a dense steel plate (H-boom / H-arm). The end of the handle is made of thick steel. Protective trapezoid.
- H-reinforced bucket. Thick steel. Additional cross plate. Additional reinforced plates in the cutting edge section.
- Reinforced lever B.
- Front lower glass protection.
- Double air filter.
- The counterweight weight has been increased by 400 kg.
- Coating thickness 4.5 mm.
- Reinforced side steps (mounting bolts).
- 600 mm reinforced shoes with triple grouser.
- Reinforced track protection (two on each side).
Characteristics of booms/sections 2
1. Shipping length of the block | 9500 mm |
3. Transport height of the block | 2970 mm |
9. Maximum cutting height | 9600 mm |
10. Maximum loading height | 6780 mm |
11. Maximum reach along ground level | 9750 mm |
12. Maximum digging depth of vertical wall | 6050 mm |
13. Maximum digging depth | 6670 mm |
Geometric parameters of digging of the Hitachi ZX210LCH excavator
Characteristic | ZAXIS 210LCH | ||
Boom and arm length | H-handle: 2.91 m (9'7″) | ||
H-boom: 6.68 m (18'8″) | |||
A | Max. digging radius | 9910 mm (32'6″) | |
A' | Max. digging radius (soil) | 9750 mm (32'0″) | |
B | Max. digging depth | 6670 mm (21'1″) | |
B' | Max. digging depth (8′ level) | 6490 mm (21'4″) | |
C | Max. digging height | 9600 mm (31'6″) | |
D | Max. unloading height | 6780 mm (22'3″) | |
E | Min. turning radius | 3540 mm (11'7″) | |
F | Max. cutting height when digging | 6050 mm (19'10") | |
Bucket digging force * | ISO | 151 kN (15,400 kgf, 34,000 lbf) | |
SAE: PCSA | 129 kN (13,200 kgf, 29,100 lbf) | ||
Handle stroke force * | ISO | 109 kN (11,100 kgf, 24,500 lbf) | |
SAE: PCSA | 102 kN (10,400 kgf, 22,900 lbf) |
Excluding shoe lug.
* — Power gain
Refill tanks for Hitachi ZX210LCH excavator
Fuel tank, l | 360,0 |
Coolant, l | 23,0 |
Engine oil, l | 25,0 |
Swing motor, l | 6,2 |
Travel motor (each side), l | 6,8 |
Hydraulic system, l | 200,0 |
Hydraulic fluid tank, l | 135,0 |
Hitachi ZX210LCH excavator working equipment
The boom and handle are welded, box-section. Length
booms 5.68 m;
handle
2.91 m.
Bucket -
welded with the ability to adjust the transverse play.
Capacity, m 3 | Width, mm | Qty teeth | Weight, kg | Recommendations | |||
ZAXIS210LCH | |||||||
According to PCSA standard | According to CECE standard | Without side cutters | With side cutters | Handle 2.91 m (H-handle) | |||
0,51 | 0,45 | 720 | 850 | 3 | 530 | +++ | |
0,80 | 0,70 | 1030 | 1140 | 5 | 670 | +++ | |
* | 0,80 | 0,70 | 1030 | 1140 | 5 | 670 | +++ |
0,91 | 0,80 | 1150 | 1280 | 5 | 720 | +++ | |
1,10 | 0,90 | 1330 | 1460 | 6 | 780 | ++ | |
1,20 | 1,00 | 1450 | — | 6 | 690 | — | |
*1 | 0,80 | 0,70 | 1030 | 1140 | 5 | 770 | +++ |
*2 | 0,80 | 0,70 | 1030 | 1140 | 5 | 770 | +++ |
*3 | 0,80 | 0,70 | 1030 | 1140 | 5 | 770 | +++ |
*4 | 0,80 | 0,70 | 1030 | 1140 | 5 | 770 | +++ |
*1 | 0,91 | 0,80 | 1150 | 1280 | 5 | 830 | +++ |
Ripper bucket: 0.60 m 3 800 mm wide | 3 | 950 | — | ||||
Single-shank ripper | 1 | 540 | — | ||||
Grab bucket: 0.60 m 3 width 940 mm | 8 | 1130 | +++ | ||||
Blade: width 1100 mm, length 1800 mm | 590 | # |
Designations:
* | Bucket with side crown clamp |
*1 | Reinforced bucket |
*2 | Reinforced bucket with side crown lock |
*3 | Reinforced bucket with V-shaped crowns |
*4 | H type bucket |
+++ | Suitable for materials with a density 1800 kg/m 3 and more |
++ | Suitable for materials with a density 1600 kg/m 3 and more |
+ | Suitable for materials with a density 1100 kg/m 3 and more |
@ | For heavy work |
# | Slope planning |
— | Cannot be used |
Weights and ground pressure of Hitachi ZX210LCH excavator
ZAXIS210LCH Excavator : The machine is equipped with a 5.68 m reinforced boom, a 2.91 m reinforced arm and a 0.80 m3 reinforced bucket.
Shoe type | Shoe width, mm | Weight, kg | Ground pressure, kPa |
Reinforced, triple grouser | 600 | 20800 | 43 |
Weight of the base machine, including the weight of the counterweight 4650 kg and shoes with triple grousers, excluding attachments, fuel, hydraulic and engine oil, antifreeze, etc.) - 16300 kg with reinforced shoes 600 mm wide.
Hitachi ZX210LCH excavator hydraulic system
- Operating mode switch: mode
digging/modeworking equipment
- Engine speed control system
Main pumps | |
two axial piston pumps with adjustable capacity | |
Maximum oil supply, l/min | 2 x 194 |
1 x 52.5 | |
Control pump | |
one gear pump | |
Maximum oil supply, l/min | 32 |
Hydraulic motors
Propulsion motors | two axial piston pumps with adjustable capacity |
Swing motors | one axial piston motor |
Safety valve parameters
Safety valve parameters | Response pressure |
Hydraulic circuit of working equipment | 34.3 MPa (350 kgf/cm 2 ) |
Swing hydraulic circuit | 30.4 MPa (310 kgf/cm 2 ) |
Travel hydraulic circuit | 34.3 MPa (350 kgf/cm 2 ) |
Control signal hydraulic circuit | 3.9 MPa (40 kgf/cm 2 ) |
Strengthened mode | 36.3 MPa (370 kgf/cm 2 ) |
Hydraulic cylinders
High strength cylinder rod and liner. Special shock-absorbing inserts protect hydraulic cylinders from shocks and shocks.
Dimensions
Quantity | Hydraulic cylinder diameter | Rod diameter | |
Arrow | 2 | 120 mm | 85 mm |
Handle | 1 | 135 mm | 95 mm |
Ladle | 1 | 115 mm | 80 mm |
K-bucket | 1 | 125 mm | 85 mm |
Hydraulic filters
The hydraulic line uses high quality hydraulic filters. The vacuum filter is located in the suction circuit,
and full-flow -
in the return and drainage circuits.
Hitachi ZX210LCH excavator engine
Model | Isuzu AA-6BG1T | |
Type | diesel, 4-stroke water cooled with turbocharging and intercooling | |
Number of cylinders | 6 | |
Power according to DIN 6271 system, kW (hp) | H/P mode | 110 (150) at 2100 min-1 |
P mode | 103 (140) at 1900 min-1 | |
Power according to SAE J1349 system, kW (hp) | H/P mode | 108 (147) at 2100 min-1 |
P mode | 101 (137) at 1900 min-1 | |
Maximum torque, Nm | 550 at 1600 min-1 | |
Working volume, l | 6,494 | |
Piston diameter, mm | 105 | |
Piston stroke, mm | 125 | |
Battery | 2 x 12 V / 55 Ah | |
Regulator | mechanical speed control with stepper motor |
Engine
Hitachi ZX210 is equipped with a 5.2 liter four-stroke engine manufactured by Isuzu. The AI-4HK1X model features direct fuel injection, low noise levels (5 dB) and vibration, intercooling system, water cooling and turbocharging.
Parameter | Meaning |
Engine model | ISUZU AI-4HK1X |
Power | 122 kW (164 hp) |
Speed | 2000 rpm |
Engine capacity | 5.2 l |
Fuel consumed | 13.5 l/hour |
Cylinders | 4 |
Torque | 655 Nm |
The engine power is 122 kW, which corresponds to 164 horsepower. Low noise level is achieved by installing an advanced fan. The maximum torque value is 655 Nm. The exhaust quality of the ZX 210 complies with international Euro-2 standards. Motor speed is 2000 rpm. The engine has 4 cylinders with a diameter of 11.5 cm.
Return to navigation
Attachments
Attachments for Hitachi ZX 210
The Hitachi 210 wheeled excavator is equipped with a standard bucket. The manufacturer has considered the possibility of installing additional equipment to expand the scope of the machine’s activities. The variety of attachments allows you to select the necessary equipment depending on the area of operation of the equipment, but you will have to purchase it additionally.
Hitachi ZX 210 bucket tooth
Attachments for Hitachi ZX 210
Return to navigation
Device
The welded body of the Hitachi ZX 210 excavator is made of high-strength steel and is very reliable and incredibly wear-resistant. The reinforced design allows the model to be used in difficult terrain, including swampy and rather weak soils. At the same time, the car is quite mobile.
The design of this model has been revised and significantly modernized. The reinforced D-shaped frame minimizes the possibility of platform deformation. The bulldozer blade received a flat bottom, which made it possible to limit damage to the working surface and prevent the adhesion of dirt. Due to the installed outriggers, which help to achieve a significant working height, the excavator can cope with work on difficult and uneven surfaces. Of particular importance is the reinforced design of the boom equipment and the chassis of the machine. Such solutions allow you to work with heavy loads. This makes the Hitachi ZX 210 suitable for demanding operations.
The advanced hydraulic system installed on the excavator cannot be ignored. It makes management much easier. The new hydraulic system takes 15% less time to lower the arm and boom simultaneously. again, technology can use automatic locking of the rear axle (occurs when the gas pedal is lowered at minimum speed). Additionally, there is a function for fixing the position of the brakes.
Hitachi ZX 210 is equipped with a powerful diesel engine with low noise level.
The excavator operator's cabin can safely be called an example of an advanced operator's workplace, equipped with maximum comfort and convenience and in accordance with all safety regulations. Due to the wide glazing of the operator's cabin, the operator has greater visibility, which significantly improves the quality of work performed by the excavator. A color monitor is installed in the machine operator's cabin, which shows the rear view, increasing driving safety. The driver's seat, equipped with longitudinally adjustable armrests, has several adjustments that allow you to customize it individually for each driver. This makes working on it more convenient. The seat itself can be moved around the operator's cabin so that the operator can choose the optimal place during work. The excavator is controlled using standard joysticks. A smaller steering column allows for more interior space in the operator's cab and underfoot.
Thanks to the E-Service system, you can access data on the operation, maintenance and location of equipment via the Internet.
The Hitachi ZX 210 is usually supplied in a basic assembly, but the manufacturer offers a wide range of attachments. Additional devices will have to be purchased separately.
Ideal for Russian roads Hitachi ZX210LCN-G crawler excavator
This summer, the range of Hitachi crawler excavators has been supplemented with another long-awaited new product - the large-sized model ZX210LCN-G has appeared.
The overall width of the new excavator is only 2500 mm, which greatly simplifies transportation on any trawl on Russian roads. Following the principle of creating only first-class quality equipment, specialists developed the ZX210LCN-G model, strictly based on the wishes of Russian customers. At the same time, the model has all the advantages of the flagship model ZX200-5G, which is similar in class. The new excavator is equipped with a strong, but at the same time economical, Isuzu AA-6BG1T (Euro 2) engine with a power of 110 kW (147 hp). The engine is equipped with a four-valve cylinder head, a direct injection combustion chamber and a high-performance turbocharger with intercooling of the intake air. At the same time, the HIOS hydraulic system, designed to optimally distribute the energy of the working fluid depending on the engine speed, ensures fuel savings. High digging force results in more efficient excavation, which is also the result of optimally coordinated engine and hydraulic systems. The high speed of rotation of the platform (13.3 rpm) significantly speeds up the process of loading into the dump truck. High traction force (203 kN) provides easier control in difficult terrain, as well as more confident climbing on slopes.
Time-tested work equipment, chassis, turntable and other components ensure reliable and trouble-free operation of the excavator on the jobsite.
When developing the new model, the company did not forget about operator comfort: functional accessories, a comfortable adjustable chair, a control panel with a display, air conditioning, a vibration- and noise-absorbing cab - all this will allow the operator to work the entire shift without feeling tired, ensuring maximum productivity.
Machinery
(HCM) , one of the world's largest construction equipment manufacturers, was established in 1970 as a subsidiary of Hitachi, Ltd.
The company currently employs more than 17,000 people worldwide. Using advanced technology and years of experience, the company has developed a wide range of equipment for construction, mining and related industries. Hitachi Construction Machinery Eurasia Sales (HCRS) is a subsidiary of HCM in Russia. The main activity of HCRS is the sale of equipment produced by the HCM Group in Russia, as well as the maintenance of Hitachi machines in Russia and the CIS countries.
HCRS supplies the Russian market with a wide range of construction equipment - from maneuverable mini-excavators with an operating weight of 800 kg to heavy-duty 800-ton mining excavators. HCRS also offers a large selection of wheel loaders, rigid dump trucks and crawler cranes. There is a wide range of modifications of Hitachi equipment to perform various types of work - from civil engineering to demolition, waste management, logging and quarrying. The technical characteristics of the machines ensure precision and ease of operation along with high productivity. At the same time, HCRS guarantees qualified technical support to its customers and official dealers in Russia and the CIS countries.
The ZX210LCN-G excavator can already be ordered from the exclusive Hitachi dealer in the Russian Federation.
Operator's cabin
Entrance to the Hitachi ZX 210 cabin
The cabin of the Hitachi 210 excavator is also worthy of special praise. Comfort, ergonomics, safety - these are the main criteria by which it was designed. The operator's viewing angle is large enough to control the entire work process.
Hitachi 210 cabin
The area behind the operator is monitored via a monitor. The latter is located on the front panel in the cab and allows you to secure the movement of equipment, as well as improve the quality of work performed. The operator's seat can be adjusted in several directions and is equipped with movable armrests that will be comfortable for any person due to their mobility. The controls include joysticks and a steering column, the dimensions of which are slightly smaller than standard ones. This design had a positive effect on the amount of free space in the cabin.
Hitachi ZX 210 operator cabin
The E-Service tracking and monitoring system provides machine location, service and performance information via the Internet.
Return to navigation
Hydraulic system
Hitachi ZX 210 is equipped with a modern hydraulic system. It has been modernized along with the frame. Now operating the excavator is quite simple: the synchronized lowering of the working handle and boom is 15% faster. The gas pedal, lowered at low speed, ensures that the rear axle automatically locks. It is also possible to fix the position of the brake pedal.
Hydraulic units Hitachi ZX 210
Return to navigation