Combine harvester Acros 585 RSM 142 technical characteristics, price, device and video

Modifications and features

Acros 585 PCM 142 is part of a large series, which again includes the Acros 580 model. Structurally, they are practically no different. There were no global changes in the combine compared to its predecessor, but some improvements made it possible to increase productivity and improve the quality of work. In the Akros 585 RSM 142 version the following appeared:

larger area treatment system;
beaterless feeder chamber of increased length;
single hydraulic connector;
a more comfortable workplace;
separated sieves in the cleaning chamber;
bunker with moisture protection.

Other advantages of Acros 585 RSM 142:

significant performance with low fuel consumption even at peak loads;
function of longitudinal-transverse surface copying, which allows you to operate equipment with significant efficiency in fields with low yields and difficult terrain;
hydraulic power steering;
modern technologies for grain mass separation. The combine provides the highest quality cleaning and minimal damage to grain;
all-metal operator cabin with an increased level of comfort;
reasonable price for purchase and service. The model is cheaper than most imported competitors.

Disadvantages of Acros 585 RSM 142:

relatively considerable power of the power plant in comparison with other representatives of the segment;
small hopper capacity.

Combine harvester PCM-142 “ACROS-530”

Procedure for registration of participation in the auction, list of participant documents and requirements for registration: To participate in open tenders, the applicant submits an application to the ETP operator. An application for participation in the auction is drawn up in accordance with Federal Law No. 127 “On Insolvency (Bankruptcy)” dated October 26, 2002 and must contain the following information: - name, legal form, location, postal address of the applicant (for a legal entity); -full name, passport details, information about the applicant’s place of residence (for an individual); -obligation of the participant in open tenders to comply with the requirements specified in the notice of open tenders; - contact phone number, email address. mail, TIN of the applicant. The application for participation in the auction must also contain information about the presence or absence of interest of the applicant in relation to the debtor, creditors, bankruptcy trustee and the nature of this interest, information about the participation of the bankruptcy trustee in the applicant’s capital, as well as information about the applicant, a self-regulatory organization of bankruptcy trustees , the member or leader of which is the bankruptcy trustee. Copies of the following documents must be attached to the application for participation in the auction: - extract from the Unified State Register of Legal Entities (for legal entities); — extract from the Unified State Register of Individual Entrepreneurs (for individual entrepreneurs); — identity documents (for individuals); — duly certified translation into Russian of documents on state registration of legal entities. person or state registration of an individual. persons as an individual entrepreneur in accordance with the legislation of the relevant state (for a foreign person); — a document confirming the authority of a person to carry out actions on behalf of the applicant.

Procedure and criteria for determining the winner of the auction: The right to acquire the debtor's property belongs to the participant in the auction for the sale of the debtor's property through a public offering, who submitted, within the prescribed period, an application for participation in the auction containing a proposal for the price of the debtor's property, which is not lower than the initial sale price of the debtor's property established for a certain bidding period, in the absence of proposals from other bidders to sell the debtor’s property through a public offer. If several participants in the auction for the sale of the debtor's property through a public offer submitted, within the prescribed period, applications containing different proposals for the price of the debtor's property, but not lower than the initial sale price of the debtor's property established for a certain period of the auction, the right to acquire the debtor's property belongs to the participant auction, which offered the maximum price for this property. If several participants in the auction for the sale of the debtor's property through a public offer submitted, within the prescribed period, applications containing equal proposals for the price of the debtor's property, but not lower than the initial sale price of the debtor's property established for a certain period of the auction, the right to acquire the debtor's property belongs to the participant tender, who was the first to submit an application within the established period for participation in the tender for the sale of the debtor's property through a public offer. From the day the winner of the open auction for the sale of the debtor's property through a public offer is determined, the acceptance of applications ceases.

Term and procedure for signing the purchase and sale agreement: Within two working days from the date of signing the protocol on the results of the auction, the auction organizer sends copies of this protocol to the winner of the auction and the bankruptcy trustee. Within five days from the date of signing this protocol, the bankruptcy trustee sends to the winner of the auction an offer to conclude a contract for the purchase and sale of property, attaching a draft of this agreement in accordance with the proposal for the price of the property submitted by the winner of the auction. In case of refusal or evasion of the winner of the auction from signing this agreement within five days from the date of receipt of the specified proposal of the bankruptcy trustee, the deposit made will not be returned to him and the bankruptcy trustee has the right to offer to conclude a contract for the purchase and sale of property to the bidder who was offered the highest price for the property compared to the price of the property offered by other bidders, with the exception of the winning bidder.

Deadlines for payment of the purchase price based on the results of the auction: The winner of the auction must pay money for the acquired property of the Debtor within thirty days from the date of signing the agreement. Recipient of payments LLC "BZK"; Recipient's TIN 3102004970; Recipient checkpoint 310201001; Recipient's account number 40702810512000003236; Name of the recipient's bank VOLOGDA BRANCH N8638 PJSC SBERBANK; BIC of the recipient's bank 041909644; Cor. recipient's bank account 30101810900000000644;

Performance characteristics:

specific productivity – 4.15 ha/hour;
working width of the reaping part – 5000/6000/7000/9000 mm;
pickup width – 3400 mm;
thresher width – 1500 mm;
Hopper capacity – 9000 l;
unloading speed – 90 l/sec;
unloading height – 4300/4700 mm;
straw walker area – 6.15 sq.m;
area of cleaning sieves – 4.74 sq.m.

Base wheel dimensions:

driving – 30.5L/R32;
managed - 18.4/R24.

Engine

The Acros 585 RSM 142 combine harvester is equipped with Cummins 6LTAA diesel units. Motors for domestic combines are assembled in China (the product is developed by a British brand). Licensed engines for Akros vehicles are again produced at Russian enterprises.

The Cummins 6LTAA is equipped with a turbocharger, a Common Rail system and a mechanical injection pump. The design of the motor is characterized by increased reliability (pistons with a steel crown are used). The torque reserve is 20%. The unit demonstrates high fuel efficiency (fuel consumption level is reduced by 15%).

Cummins 6LTAA engine characteristics:

working volume – 8.9 l;
rated power - 300 hp;
number of cylinders – 6 (in-line arrangement);
cylinder diameter – 114 mm;
specific fuel consumption – 206 g/kW per hour (approximately 2.2 l/t).

The combine is equipped with a fuel tank with a capacity of 540 liters, allowing operation for 15 hours without additional refueling.

again, the Acros 585 RSM 142 can be equipped with a domestic YaMZ engine (power - 280 hp).

Video

The main differences between Acros 585 and its predecessor:

single hydraulic connector;
increased cleaning area;
moisture-proof bunker;
separated sieves in the cleaning chamber;
beaterless extended feeder chamber;
improved workplace.

There were no global design changes in the Akros 585 model. However, improvements made it possible to increase the productivity and quality of the combine, allowing the domestic combine to compete with foreign analogues of the fifth class.

News here.

The scope of application of the Acros 585 combine is the collection of small-seeded and grain crops and the processing of straw for further use in livestock farms. The equipment is designed for fields with medium and high yields. Modern technologies and advanced equipment ensure maximum crop safety. The technology is based on a proven threshing and separating mechanism with one large drum and a straw walker. Reliability and good service guarantee exceptional efficiency of the combine.

Design and operating features

The Akros 585 RSM 142 is based on the design of its predecessor Akros 580. The special equipment is equipped with a hydrostatic transmission, supplemented by a 3-speed gearbox. The combine is equipped with German hydraulics, which are characterized by reliability and accuracy of operation. The hydraulics include highly specialized modules connected to each other (reel drive, steering, main module and chassis drive). The modules operate using a high-performance hydraulic pump and a single hydraulic tank.

Main operating elements of the combine:

reaping part. All brand products are traditionally equipped with Power Stream headers. The Acros 585 RSM 142 is no exception. Headers from 6000 to 9000 m are available for it. The Schumacher drive sets the rotation speed up to 1140 rpm. Due to the unique trajectory of the reel and long rake fingers, the combine harvester copes with harvesting twisted and downed crops. 2 variants of the terrain following system are functionally installed: electrohydraulic (AUTO CONTOUR) and hydromechanical (LEVEL GILDE). Power Stream headers work effectively with any type of crop and have a large margin of safety. The operator can fix minor problems in the field thanks to the simple design. With the machine, in addition to the basic Power Stream headers, a variety of devices can be used: a device for harvesting corn, a specialized rapeseed stand, a pick-up platform with element protection, ZhZT-9 transport headers for sparse and low-growing grains, a device for small-seeded crops (legumes and cereals) , 8- and 12-row headers for working with sunflower.
threshing and separation system. Akros 585 is equipped with one drum with an increased diameter (800 mm). The increased concave grip angle (130 degrees) allows you to expand the separation area. The separation scheme in the combine has been changed. In the classic version, the unmilled grain is sent back into the drum. The Acros 585 PCM 142 has an autonomous pre-threshing device, which is a rotor with 3 blades. This technology reduces the load on the drum and provides softer threshing;
improved feeder camera. This element has been changed the most seriously. The elongated shape and the absence of a beater have improved the performance of the header and simplified the process of re-equipping the cutting device. The loading capacity of the chamber increased to 3000 kg, which made it possible to work with headers with a large grip. Installation of the cutting apparatus is carried out using a single hydraulic connector;
a bunker with a patented Smart Launch system (separate operation of horizontal and unloading augers), which made it possible to perform portioned unloading. Once operations are completed, the unloading auger is cleared of grain before folding, minimizing the losses typically experienced by other machines. The mobility of the auger allows you to unload grain into any transport. The bunker itself is equipped with a roof controlled from the interior;
built-in chopper-spreader with a mechanism for adjusting the angle of the guide blades and self-sharpening knives. The unit allows you to evenly distribute pre-cut straw across the field to the working width of the header.

Among combines of a similar class, the Acros 585 RSM 142 has the most comfortable workplace. The 2-seater all-metal sprung operator's cabin Comfort Cab II with full sealing is complemented by enhanced vibration and noise insulation. As standard, the special equipment is equipped with an Adviser II information display, equipped with voice notification, a climate system, a cooling chamber, a control panel and audio preparation. The combine is controlled using the GST handle with 16 positions.

The steering is simplified and complemented by automatic control that maintains balance between the wheels. Adjusting the steering wheel allows you to configure it for optimal operation depending on the size of the operator. The driver's seat also has a wide range of settings.