Pumps for fuel and bitumen tankers Blackmer TXD 2.5 and TXV 2.5 series

The SSHN-50/600 fuel vane pump is designed for pumping light petroleum products: gasoline, diesel fuel, kerosene. Also used for pumping liquids that are non-aggressive to the materials of pump parts, with a density of up to 1050 kg/m3 and a viscosity of no more than 76∙10-6 m2/s. Climatic modification and placement category UHL1 according to GOST 15150.

The main advantage of the SSHN-50/600 pump is its compact size with a capacity of 600 liters per minute and it is mounted on a fuel tanker without using a cardan shaft directly into the power take-off. There are also models of the SSHN-50 pump, which are aggregated with an MP 40 hydraulic motor, which allows it to be installed on a trailer or semi-trailer tank of a fuel tanker.

When purchasing a pump SSHN-50/600, you must indicate the following data: rotation of the pump (left or right). What it is aggregated with: - with the PTO of the KAMAZ, MAZ chassis; -with PTO chassis GAZ; - with hydraulic motor. The pump manufacturer is constantly updating its products to improve their performance, so there may be differences between the design described in this manual and the product supplied.

Attention! For reliable operation of the SSHN-50 pump, it is necessary to install a FCGO Du-50 filter specially designed for it in front of it. Previously they were installed according to the recommendation of the manufacturer of the FGO DU-80 filter. New filters, thanks to the glass flask, are more convenient to use, which allows you to monitor the degree of contamination of the filter element and facilitates its timely cleaning (rinsing).

You can buy the SSHN-50/600 pump directly on the website or send a request to us by email. This email address is being protected from spambots. Javascript must be enabled in your browser to view the address. or call 8 (8412) 676-271; 8-937-434-90-82 8 (8412) 220-603; 8-967-445-06-03.

Vehicles for transporting radioactive substances and materials

We recommend!

The special Volkswagen Caddy vehicle is designed to transport radioactive materials from the Republic of Moldova (hazard class 7).

The LADA Largus vehicle is designed for transporting radioactive materials from the Republic of Moldova (hazard class 7).

The fuel tanker on the GAZ-C41R13 “GAZon NEXT” chassis is designed for transportation, short-term storage of light petroleum products and refueling other equipment with them. Tank volume - 5.5 cubic meters.

The special GAZ-A31R32 “Gazelle Next” vehicle with an all-metal van is designed for the transportation of dangerous goods of class 1 (explosives)

Vehicle for transporting explosives KamAZ-43114. Hazard class 1. Car van body - increased strength.

A vehicle for the transport of dangerous goods based on the Ford Transit 350 LWB chassis meets the requirements of the “Rules for the Transport of Dangerous Goods by Road (POGAT)” and the requirements of the “European Agreement concerning the International Carriage of Dangerous Goods on Public Roads in EX/III Class Vehicles (according to the ADR classification and UNECE Regulation No. 105).

The ACC-10 acid tanker on the KamAZ-43118 chassis is designed for transportation, short-term storage and pumping of brine solutions, inhibited hydrochloric acid and other acids.

Source of the article: https://www.opasnyemashiny.ru/3-class/benzovozy/123-benzovoz-6613-31-kamaz-6522.html

Blackmer TXV 2.5 series vane pump for dark petroleum products

This pump model is installed on vehicles transporting bitumen, lubricating oils, resins, molasses, bunker fuel, ink, and glue.

TXV pumps pump more fluid per revolution than similarly sized gear pumps. And lower operating speeds provide longer service life and reduced maintenance requirements. An internal safety valve protects the pump from pressure build-up.

The TXV pump is the best solution when it is necessary to transport liquids that are difficult to pump with equipment with mechanical seals. TXV 2.5 is suitable for thick viscous liquids that can harden in air. The standard design includes a special open rotor design for easy flushing, bronze vanes, fluoroelastomers, PTFE lip seals, heat-resistant grease-lubricated ball bearings isolated from the pumped liquid, and heat-resistant seal materials.

The TXV 2.5 pump is ideal for handling viscous or shear-sensitive fluids. The unique bladed rotor design provides consistent high performance over a wide viscosity range. Low operating speeds and non-pulsating flow minimize fluid shear and mixing.

TXV pumps are self-priming and self-adjusting vanes help maintain this ability. TXV pumps can be run dry for a short priming period.

Product description

ATZ fuel tanker trucks are a modern and reliable vehicle. Such a vehicle can serve both for simple transportation and temporary storage of fuels and lubricants, and acting as a fuel tanker, refueling other cars or other equipment with petroleum products with a density of up to 0.86 t/m3 while simultaneously taking into account the volume of fuel dispensed, as well as for pumping fuel from one container to another . ATZ tank trucks are manufactured on the meringue GAZ-3302 GAZelle Business, GAZelleNEXT, GAZ-33106 Valdai (V-4 m³), ​​GAZ-3309 (V-4.9 m³), ​​GAZ-3307 (V-4.9 m³), ​​GAZ- 33086 (V-4.9 m³), ​​UAZ (V-1.5 m³), ​​HYUNDAI (V-4.9 m³)

  • The tank is made of sheet steel and has an elliptical cross-section, which reduces the center of gravity of the tanker and gives it greater stability.
  • The tanker is equipped with a self-priming pump, communications, a grounding device, two fire extinguishers, an exhaust system with a spark arrester located in the front of the vehicle, pressure and suction hoses, a pump drive, a meter and a dispensing valve.
  • The pump is started from the driver's cabin using the power take-off lever through the cardan shaft.
  • ATZ is designed for operation in harsh Russian climatic conditions.
  • filling the tank with its own pump;
  • filling your own tank with a third-party pump using the top method
  • draining fuel from the tank by gravity
  • dosed delivery of fuel through the fuel distribution unit (throughput 80 l/min)

COMPOSITION OF THE FUEL DISCHARGE UNIT:

  • liquid meter;
  • dispensing valve;
  • filter;
  • dispensing sleeve.

Technical characteristics of the tanker

ChassisGAZ-3309
EngineMMZ-245; YaMZ
Drive unit4x2; 4x4
Weight of the equipped tank truck, kg, no more than:3980
Total weight of the tank truck, kg, not more than:8180
Container shapeelliptical
Tank volume at temperature 2930 K (200C), l/m³4900/4,9
Number of sections, pcs.1, 2
External skinsteel 3 with paintwork
Performance pump360-700 l/min
Pump drivefrom the car engine power take-off
Overall dimensions of the vehicle with tank, mm
- length Width Height6200
Order standard equipment:

— Automatic fuel tanker based on GAZ-3309

You can order the package according to the following items:

  1. Navigation system
  2. Sticker “Logo or phone number”
  3. 4x4 drive
  4. Car radio
  5. Car alarm
  6. Anti-corrosion treatment
  7. Engine preheater
  8. Heater
  9. Tachograph
  10. Fog lights

Source of the article: https://pelengagro.ru/catalog/avto-toplivozapravshhik-atz-na-baze-gaz-3309-1-sektsiya/

Blackmer TXD 2.5 series vane pump for light petroleum products

Equipment in this series is used primarily for the transportation of fuel oil, jet and aviation fuel, gasoline, ethanol and other alcohols, lubricating oils, solvents, esters, ketones, arenes, glycol, additives.

Main characteristics and advantages of TXD 2.5 series pumps:

  • double-sided drive shaft for clockwise or counterclockwise rotation;
  • outer roller ball bearings supporting the rotor on both sides and creating a stable environment for the internal mechanical seals;
  • Proprietary Blackmer mechanical seal and ball bearing design for maximum reliability;
  • internal mechanical seals for long-term dry running and continuous operation with non-lubricating liquids;
  • symmetrical bearing support, responsible for uniform load and wear for a long service life;
  • adjustable safety valve to protect the pump from excessive pressure;
  • external ball bearings isolated from the pumped fluid by mechanical seals to extend bearing life and minimize the risk of contamination;
  • ease of maintenance due to easy replacement of blades without removing the pump from the vehicle.

The TXD 2.5 model is equipped with a JOHN CRANE mechanical seal. Optionally, the pump can be equipped with a corrosion-resistant safety valve, pneumatic safety valves, elastomers and seals made of NBR or PTFE.

Pumps for fuel DB /diesel fuel, fuels and lubricants, petroleum products, liquid oils/

Pump for petroleum products ANSV

Pump for petroleum products ANSV, capacity 18 and 60 m 3 /hour. Manufactured on the basis of NSV pumps. Designed for pumping gasoline, diesel fuel from containers to containers, for refueling equipment, for unloading automobile and railway tanks. For filling oil products into railway tankers and tank trucks. For convenience, the ANSV pump can be equipped with a trolley. You can buy a pump for petroleum products by calling us at (495) 661-87-18 or sending a request by email [email protected]

ModelFeed l/minHead, mInput/Output, mmPower e/dv. DimensionsWeight, kgPrice
ANSV-300(ASVN-50)183050/502,2*1000900x420x4005554000
ANSV-1000(ASVN-75)605080/8011*1000900x420x40017598000

Pump for petroleum products NSh

Pump for petroleum products NSh , productivity from 1.1 to 60 m 3 / hour, depends on the model. Manufactured on the basis of NSh pumps. Designed for pumping oil, fuel oil, diesel fuel from containers to containers, for refueling equipment, for unloading automobile and railway tanks. For filling oil products into railway tankers and tank trucks. For convenience, the NSh pump can be equipped with a trolley. You can buy a pump for petroleum products by calling us at (495) 661-87-18 or sending a request by email [email protected]

ModelFeed m 3 /hourHead, mInput/Output, mmPower e/dv. Price
NSh-1.1/14.5 1.5 kW1,11453/4»-1»1,5*150020500
NSh-2.0/14.5 2.2 kW2,014511/2»-11/2»2,2*150022700
NSh 3.3/3.3 1.5 kV3,3333/4»-1»1,5*150020900
NSh 5.0/3.3 2.2 kW5,03311/2»-11/2»2,2*150023300
NSh 8.0/3.3 3kW8,03311/2»-11/2»3*100027500
NSh-12.0/6.0 5.5 kW12,0602»-2»5,5*150038900
NSh 18.0/3.6 5.5 kW18,0363»-3»5,5*100041400
NSh 26.0/3.6 7.5 kW26,0363»-3»7,5*150055200
NSh 39/6 11kW39,0603»-3»11*150055600
NSh 57.6/3.057,6304»-4»18,5*150088410

Pump for petroleum products NMSh

Pump for petroleum products НМШ productivity from 1.6 to 60 m 3 / hour depends on the model. Manufactured on the basis of NMSh pumps. Designed for pumping oil, fuel oil, diesel fuel from containers to containers, for refueling equipment, for unloading automobile and railway tanks. For filling oil products into railway tankers and tank trucks. For convenience, the NSh pump can be equipped with a trolley. You can buy a pump for petroleum products by calling us at (495) 661-87-18 or sending a request by email [email protected]

ModelFeed m 3 /hourHead, mInput/Output, mmPower e/dv. Price
NMSh 2-40-1.6/16 1.5 kW1,616025/201,5*150033925
NMSh 2-40-1.6/ 16 2.2 kW1,616025/202,2*150035900
NMSh 5-25-4/4 1.5 kW44040/321,5*150034264
NMSh 5-25-4/4 2.2 kW44040/322,2*150036231
NMSh 5-25-4/10 3kW410040/323*100037300
NMSh 5-25-4/25 5.5 kW425040/325,5*150048900
NMSh 8-25-6.3/2.5 1.5 kW6,32550/321,5*150034500
NMSh 8-25-6.3/2.5 2.2 kW6,32550/322,2*150036800
NMSh 8-25-6.3/10 4kW6,310050/324*150047550
NMSh 8-25-6.3/2.5 7.5 kW6,32550/327,5*150052900

Oil product pump Ш

Pump for petroleum products Ш productivity from 18 to 38 m 3 / hour depends on the model. Manufactured on the basis of Sh pumps. Designed for pumping oil, fuel oil, diesel fuel from containers to containers, for refueling equipment, for unloading automobile and railway tanks. For filling oil products into railway tankers and tank trucks. For convenience, pump Ш can be equipped with a trolley. You can buy a pump for petroleum products by calling us at (495) 661-87-18 or sending a request by email [email protected]

ModelFeed m 3 /hourHead, mInput/Output, mmPower e/dv. Price
Ш 40/4-19.5/4 5.5 kW19,54080/805,5*100066800
Ш 40/4-19.5/4 7.5 kW19,54080/807,5*100068500
Ш 80/2.5-37.5/2.5 11kW37,525100/10011*1000122500
Ш 80/2.5-37.5/2.5 15kW37,525100/10015*1000129600

Section 2. Pump for petroleum products 220V

Oil pump DB

Pump for petroleum products DB, capacity 40-100 l/min. Designed for pumping diesel fuel, Gasoline (Ex), diesel fuel, cutting fluids from container to container, for refueling equipment, for unloading barrels, Eurocubes, for distributing fuel from tankers. For filling petroleum products into containers and tanks. For convenience, the DB pump can be equipped with a fuel meter and a dispensing valve. You can buy a 220 volt pump for petroleum products by calling us at (495) 661-87-18 or sending a request by email [email protected] as well as many other pumps, see the section: 12,24,220 volt pumps

ModelFeed l/minHead, mInput/Output, mmPower e/dv.kW. DimensionsWeight, kgPrice
DB-60601825/250.55270×210×24096800
DB-70702025/250,55280×220×25098900
DB-70Ex703025/250.75540x240x3602635000
DB-80802225/250,55290×220×250129900
DB-80Ex803025/250.55300x200x2401222000
DB-1001001825/250,75300×220×2501814350

Oil pump Viscomat

Pump for petroleum products Viscomat capacity 25 and 50 l/min. Designed for pumping diesel fuel from container to container, for refueling equipment, for unloading automobile tanks. For filling petroleum products into tanker tanks. For convenience, the Viscomat can be equipped with a fuel meter and a dispensing pistol. You can buy a pump for petroleum products by calling us at (495) 661-87-18 or sending a request by email [email protected] as well as many other pumps, see the section: Pumps 12,24,220 volts

ModelFeed l/minHead, mIn/You, mmPower e/dv. W DimensionsWeight, kgPrice
Viscomat 70M25301»/1»750350x200x2801422100
Viscomat 90M50401»/1»1600350x200x2801424800

JYB Petroleum Products Pump

Pump for petroleum products JYB capacity from 15 l/min, depending on the model. Designed for pumping oil, diesel fuel from containers to containers, for refueling equipment, for unloading automobile tanks. For filling petroleum products into containers and tank trucks. For convenience, the NS pump can be equipped with a fuel meter and a dispensing pistol. You can buy a pump for petroleum products by calling us at (495) 661-87-18 or sending a request by email [email protected]

ModelFeed l/minHead, mInput/Output, mmPower e/dv.W DimensionsWeightPrice
JYB-1151451»-1»1000410x220x2401219300
DYB-1530203/4»-3/4»550410x220x2401111500

Oil pump BEg/Novax

BEg/Novax petroleum products pump with a capacity of 15 and 30 l/min depending on the model. Designed for pumping oil and diesel fuel from containers to containers, for refueling equipment, for unloading containers. For filling petroleum products into containers. For convenience, the NS pump can be equipped with a fuel meter and a dispensing pistol. You can buy a pump for petroleum products by calling us at (495) 661-87-18 or sending a request by email [email protected]

ModelFeed l/minHead, mIn/Out, mmPower e/dv. W SizeWeightPrice
Be G20 HP0.8302520/20800230x120x190718200
Be G20 HP0.6302520/20800230x120x190717900
NOVAX G20 HP0.8152520/20600230x120x190620100

Oil pump VNB

Pump for petroleum products VNB (Barrel pump for petroleum products) productivity from 0.42 to 3 m 3 / hour depends on the model. Designed for pumping oil, fuel oil, diesel fuel from containers to containers, for refueling equipment, for unloading automobile and railway tanks. For filling oil products into railway tankers and tank trucks. For convenience, pump Ш can be equipped with a trolley. You can buy a pump for petroleum products by calling us at (495) 661-87-18 or sending a request by email [email protected]

ModelFeed m 3 /hourHead, mInput/Output, mmPower e/dv. W DimensionsWeightPrice
VNB-10,42-0,875053/3213001350x230x230956000
VNB-319,55053/3213001350x230x230958000
VNB-537,55053/3813001350x230x2301268000

Section 3. Pump for petroleum products 12-24V

Section 4. Oil pump Manual

Manual pump for petroleum products Shelf FX1080. productivity 20l/min. Designed for pumping oil, diesel fuel from containers to containers, for refueling equipment. For pumping oil out of barrels. It is widely used as an oil change pump in car repair shops. The pump for changing oil from a barrel is manual, comes assembled and does not take up much space. You can buy a barrel pump for petroleum products by calling us at (495) 661-87-18 or sending a request by email [email protected]

Feed l/minHead, mEnter exitDimensionsWeight, kgPrice
20540/201050x100x450 (packed)02,21600

Manual pump for petroleum products Shelf FX19B

Manual pump for petroleum products Shelf FX19B. productivity 25l/min. used for pumping oil, diesel fuel from containers to containers, for refueling equipment. It is widely used as an oil change pump in car repair shops. The pump for pumping oil from a barrel is manual, supplied disassembled and does not take up much space. pump for petroleum products is a manual pump for pumping oil, has a telescopic tube at the inlet. You can buy a pump for petroleum products, a manual pump for oil, by calling us at (495) 661-87-18 or sending a request by email [email protected]

Feed l/minHead, mEnter exitDimensionsWeight, kgPrice
252040/21480x180x10022500

Manual pump for petroleum products D360c

Manual pump for petroleum products D360c. productivity 10l/min. Designed for pumping oil, diesel fuel from containers to containers, for refueling equipment. For pumping oil out of barrels. It is widely used as an oil change pump in car repair shops. The barrel oil pump is manual, comes assembled and does not take up much space. By purchasing a D-360C pump you will receive a high-quality ready-made pump for little money. You can purchase a manual oil pump from a barrel by calling us at (495) or sending a request by email [email protected]

Feed l/minHead, mInput/Output, mmDimensionsWeight, kgPrice
10125/12210x30x4701,21800
Manual pump for petroleum products Shelf
To enlarge a picture, click on its image.Manual pump for petroleum products Shelf FX18. productivity 20l/min. The pump is used for pumping oil, diesel fuel from 200 liter barrels, the pump has an adapter for connecting to a barrel, and the pump is also suitable for filling equipment with oil. For pumping oil out of barrels. It is widely used as an oil change pump in car repair shops. The pump for pumping oil from a barrel is manual, supplied assembled and does not take up much space. By purchasing the FX-18 pump, you will not have to think about how to make an oil pump with your own hands, since you will receive a high-quality ready-made pump for little money. A manual pump for pumping oil has a telescopic tube at the inlet. You can buy a pump for pumping petroleum products by calling us at (495) 661-87-18 or sending a request by email [email protected]
Feed l/min
Head, mInput/Output, mmDimensionsWeight, kgPrice
202040/20480x140x100 (packed)2,21500
Manual pump for petroleum products Shelf HS-25.Manual pump for petroleum products Shelf HS-25. productivity 25l/min. Designed for pumping oil from barrels, diesel fuel from containers to containers, for refueling equipment, when equipped with a hose. The pump is widely used as an oil change pump in car repair shops. The barrel oil pump is manual, comes assembled and does not take up much space. By purchasing the HS-25 pump you will receive a high-quality ready-made pump for little money. The housing, Oil Barrel Pump, HS-25 is made of cast iron. You can buy a manual pump for pumping petroleum products by calling us (495) 661-87-18 or by sending a request by email [email protected] Feed l/min
Head, mPower, WEnter exitDimensionsWeight, kgPrice
25515025/351200x200x15052100
Manual pump for petroleum products Shelf CH-25Manual pump for petroleum products Shelf CH-25. productivity 25l/min. Designed for pumping oil from barrels, diesel fuel from containers to containers, for refueling equipment, when equipped with a hose. The pump is widely used as an oil change pump in car repair shops. The barrel oil pump is manual, comes assembled and does not take up much space. By purchasing a CH-25 pump, you will not have to think about how to make an oil pump with your own hands, since you will receive a high-quality ready-made pump for little money. The hand pump for pumping oil CH-25 has a steel pipe at the inlet consisting of three elbows, which makes it convenient to withdraw oil from containers smaller than a 200-liter barrel. The oil barrel pump body is made of aluminum. You can buy a manual pump for petroleum products by calling us (495) 661-87-18 or by sending a request by email [email protected] Feed l/min
Head, mEnter exitDimensionsWeight, kgPrice
25525/351200x200x15032000
Manual pump for petroleum products Shelf FX1080

Delivery throughout Moscow.

  • Within the Moscow Ring Road 600 rub.
  • Delivery time: Delivery is carried out within 1-2 business days from the moment of confirmation of the order or receipt of money on the account
  • Delivery time: from 8 to 17-30 weekdays. On weekends by arrangement.
  • When receiving goods paid for by bank transfer, a power of attorney or seal is required.
  • Pickup possible, metro station Ryazansky Prospekt, 22 k2

Delivery throughout Russia, Oil pump from a barrel.

  • For shipping within Russia, prepayment is required
  • For an order amount of 30,000 rubles or more, free delivery to the TK terminal in your city is possible. (Check with managers.)
  • Sending through transport companies, Zheldorekspeditsiya, Energiya, PEC up to 50 kg. Delivery cost to the Moscow branch of TK is free.
  • Delivery to other transport companies is paid separately and depends on the amount of the order and the location of the transport companies.
  • Shipment is carried out within 1-4 working days from the moment the money is received at our account, as a rule, it is agreed upon when ordering.
  • The cost of delivery from the TK terminal in Moscow to the TK terminal in your city, you pay to the transport company upon receipt of the goods in your city.
  • When ordering, please indicate the method of shipment. You can check the estimated cost of delivery from Moscow to your city with transport companies. To contact you, we ask you to indicate working telephone numbers.

Source of the article: https://shelf-1.ru/nasos-dlya-nefteproduktov

Pump device

The SSHN-50/600 pump consists of a housing in which a rotor is installed. The housing is closed with a lid. One rotor support is a bearing installed in the housing, the second is a bearing installed in the cover. The rotor has 10 blades. The rotor sealing assembly consists of: an o-ring, a bushing, a steel washer, an o-ring, a steel pressure ring and springs. The working body of the pump is made in the form of an eccentrically located rotor having longitudinal radial grooves in which the blades slide. A bypass valve is installed between the inlet and outlet pipes of the pump. The bypass valve is designed to protect the pressure line from excess pressure of the pumped fuel at the pump outlet and provide short-term (no more than 5 minutes) operation when the pressure line is blocked.

Rating
( 2 ratings, average 4.5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]