Trimmer Carver GBC-043
The petrol trimmer Carver 043 is suitable for working on a large area of up to 10 acres. The high engine power of 2.3 hp helps to cope even with dense thickets and bushes. For lawn grass, a reel with fishing line is used, and for more difficult areas, a knife is used.
A special feature of the model is its light weight, which provides certain advantages in operation over other models. To make working with the Carver trimmer easier, you can use a shoulder strap. The tank capacity of the lawn mower is 0.95 liters, which makes it possible to go without refueling for a long time.
Advantages of the petrol trimmer model Carver GBC-043
- It is easy to transport the unit to any place;
- Economical and reliable engine;
- Low weight of the lawn mower;
- Ease of operation;
- Allows you to maneuver between various obstacles.
Basic equipment of the Carver GBC-043 lawn mower
Carver Company - the history of the brand's formation
The Russian brand was founded in 2009 by the Perm enterprise Uraloptinstrument. Since entering the market, Carver has set a course for the active development and widespread production of semi-professional and professional equipment for gardening and vegetable gardening. The list of products of the Russian brand began to quickly expand with powerful chainsaws, 2-stroke and 4-stroke cultivators, as well as durable walk-behind tractors.
Today this company is one of the manufacturers producing the highest quality domestic trimmers. Each Carver brush cutter is distinguished by its high reliability, excellent quality of components and assembly, as well as long service life. Prices for equipment from a Russian company make it accessible to almost every gardener.
Characteristics
The presented lawn mower has different versions, which differ in engine power - these are Carver GBC-043M and Carver GBC-043MS lawn mowers. Both units are equipped with a two-stroke gasoline engine with a power of 1.7 hp, but the difference between them lies in weight. The 043MS version weighs approximately 8 kg, so it is best used with a shoulder strap for even distribution on the operator's arms and torso.
Name | Carver GBC-043 | Carver GBC-043M | Carver GBC-043MS |
engine's type | petrol | petrol | petrol |
Power, kW/hp | 1.7/2.3 | 1.25/1.7 | 1.25/1.7 |
Engine volume, cm3 | 43 | 43 | 43 |
Engine stroke | 2,0 | 2.0 | 2.0 |
Cutting element | fishing line, knife | fishing line, knife | fishing line, knife |
Tank capacity, l | 0.95 | 0.95 | 0.95 |
Dimensions, mm | 300*230*330 | 1650*250*440 | 1050*280*280 |
Weight, kg | 5.6 | 6.7 | 8 |
User manual
All models of lawn mowers use a mixture of gasoline and lubricating fluid as fuel. Prepare the mixture according to the rule - take 1 part of adapted motor oil and 50 parts of gasoline with an octane number of 92.
Trimmers do not require running-in, but at the beginning of work it is advisable to use only half the power. When preparing the fuel mixture for the first two refuelings, you should add 10% more oil than recommended.
To extend the life of the motor, adhere to the following rules:
- Do not use low-quality gasoline. Oil must be added!
- Do not turn on the lawn mower at high speeds without load.
- You cannot pour lubricant for 4-stroke engines.
After 10 hours of operation of the gas trimmer, you must:
- Check the condition of the muffler;
- Clean or replace the air filter;
- Check the gap between the spark plug contacts;
- Clean the ventilation holes;
- Add oil to the gearbox.
Every 45 minutes of operation, you need to take a break for 10-15 minutes, while completely turning off the trimmer. This is done to prevent the device from overheating.
The manufacturer strictly prohibits disassembling the motor components on your own and recommends that in the event of a breakdown, contact a service center.
You can learn more about the features of maintenance and operation of the Carver gasoline trimmer of all presented modifications in the instructions: Your browser does not support frames Download the Operating Manual for the Carver GBC-043 and GBC-052 trimmer
Basic maintenance work for the Carver trimmer
- Replace the fuel suction head annually; you should also replace the sealing plug in the gas tank (it dries out and begins to leak fuel). Along with this procedure, the fuel tank is inspected and cleaned;
- The Carver gas trimmer is balanced every time the cutting equipment is changed. When the tool is properly balanced, the cutting attachment barely touches the ground with the trimmer positioned on the operator's shoulders;
- Inspect and clean the air filter regularly. If necessary, replace the filter element;
- The spark plug is inspected every 25 workers, replaced as necessary;
- Before each use of the brush cutter, inspect the cutting equipment. Do not use an electric or gasoline trimmer with a damaged blade or faulty cartridge;
- Before each start of the Carver electric trimmer, make sure that the motor housing and insulation are intact, check that the plug and power cord are in good condition, and ensure that the ventilation holes on the motor are clean;
- Inspect and clean the breather and muffler regularly (every 50 engine hours). If the muffler of a gasoline trimmer burns out, replace the unit with a new one.
Owner reviews
Numerous owners in their reviews note the low cost of the Carver GBC-043M model and its high power, which is enough to mow grass and shrubs. However, there have also been negative reviews in which owners complain about a low-quality piston group, the repair of which is not covered by the warranty.
Anton:
“I’ve been using the trimmer for 5 years and have no complaints. Assembled and launched according to the instructions. I used a fuel mixture of 1:50. I didn’t find any significant shortcomings, so I won’t talk about minor ones. I advise anyone who is not familiar with equipment not to try to repair it themselves.”
Konstantin:
“After 5 minutes the engine started to stall and would not start again. We sent it to the service center, but they said that the piston group was not subject to warranty and billed us 1,700 rubles. We carried out the launch according to the rules, so there are no shortcomings on our part.”
Trimmer "Cover" model GBC 31F
In this model, cleaning the air filter is easy and simple. Management is easy and simple. The set includes a special cutting disc for mowing tall weeds and shrubs. Main technical characteristics:
- power 800 W;
- the cylinder has a working volume of 31 cubic meters. cm;
- assembled trimmer weight 8.1 kg.
It is also worth taking into account the fact that the engine cylinder is chrome plated, which significantly increases the service life of the engine.
Instructions: Petrol trimmer Carver GBC-043MS
Sorry, the product is currently out of stock
Free delivery within Krasnoyarsk
News from the Laukar online store:
Additional information in the Lawn Mower category:
In the online store of household appliances "Laukar" you can download the instructions for the product Carver GBC-043MS petrol trimmer completely free of charge.
All instructions presented on the website of the Laukar online store of household appliances are provided by the manufacturer of the product. Before using the product, we recommend that you read the instructions for use.
In order to download the instructions, you need to click on the “download instructions” link located below, and if there is no link, you can try to access this page later, perhaps the specialists of the online store of household appliances “Laukar” have not yet had time to download to download instructions for the product: Petrol trimmer Carver GBC-043MS.
The manufacturer reserves the right to make changes to the design, design and configuration of the product: Petrol trimmer Carver GBC-043MS. Please check the product information with the information on the official website of the manufacturer.
Do you want your house or summer cottage to look perfect? Do you dream of a well-groomed, truly “English” lawn in your yard? Then you need to buy a lawn mower and landscape the area to your own taste.
Carver GBC-043 petrol trimmer buy
Notify about price reduction
We will notify you as soon as the price of the item decreases. Please indicate the notification method. The notification will be one-time. If the price does not suit you, you can re-activate this service.
Notify about product availability
We will notify you as soon as the product goes on sale. Please indicate the notification method. The notification will be one-time.
Send a link to this product. A competitor will have a lower price - we'll make a discount!
Cash payment Payment by bank card Non-cash payment for legal entities Credit
Instructions Carver GBC-043 Detailing Carver GBC-043
Catalog of spare parts for petrol trimmer Carver GBC-043
The Carver GBC-043 is equipped with a 1.25 kW (1.7 hp) two-stroke petrol engine. The rod is one-piece (non-separable). You can mow the grass with a fishing line or a metal knife.
Fuel and lubricants for Carver lawn mowers
The Carver petrol mower is driven by a single-cylinder, two-stroke internal combustion engine. The piston parts of such engines are lubricated with oil, which is added to gasoline. Thus, before refueling the trimmer, you need to prepare an oil-gasoline mixture.
As the basis for the mixture, we take high-octane gasoline of the AI-92 brand and add motor oil for two-stroke engines at the rate of 1 to 50, that is, we dilute 20 grams of oil with one liter of gasoline. The modern two-stroke engine of the Carver lawn mower does not require special running-in. However, company representatives recommend running out two or three tanks of fuel in a gentle manner, without overheating or particularly overloading the device. Also during this period, it is recommended to add 10% more oil to the fuel mixture than usual.
The mixture for the Carver scythe is prepared in a separate container; it is prohibited to mix fuel in the tank of the lawn scythe. It is not recommended to prepare large quantities of fuel - it should be used within two to three weeks. The use of oils not intended for two-stroke air-cooled engines is also prohibited. Use only proven oils.
Recommended engine oils for Carver gasoline trimmer:
- Oleo-Mac Prosint 2T;
- STIHL HP;
- Echo JASO FD with dispenser;
- Husqvarna HP;
- CHAMPION JASO FD.
Gasoline trimmer Carver GBC-043 - features
- Easy access to the air filter for maintenance
- Trimmer control is located on the handle
- Rigid shaft on six support bearings
- A convenient backpack that makes it easier to work with a lawn mower
- Reinforced gearbox
- Engine with patented After Charge and Clean2 systems made in accordance with the international standard EPA EU-II
- Clean2 is a system that allows you to make the most efficient use of the fuel mixture, reducing its consumption by 20%, and also facilitates an increase in power by 5%, torque by 17% and reduces vibration levels by 15% compared to similar 2-stroke engines
- Chrome - technology of porous chrome plating of the inner part of the cylinder surface ensures an increase in the wear resistance of the cylinder-piston group by 3-5 times
- disc with carbide teeth for mowing bushes
- easy engine starting system
- presence of a primer
Stock
All store promotions. This section presents all products with discounts (sale of goods), as well as products, upon purchase of which, in addition to the product itself, you are guaranteed to receive a gift provided by the promotion.
Petrol mower "Carver" model 052 PRO
This model is intended for professional use, which is why it is very popular among utility companies. The peculiarity of the model is that it is equipped with a rod with a diameter larger than average, a rigid shaft, roller bearings and a powerful gearbox.
Quality characteristics:
- gasoline engine operating in two-stroke mode;
- power 2300 W;
- The engine cylinder has a displacement of 25 cc. cm.
The unit is equipped with a fishing line and a special knife
How to choose a trimmer for your garden
A trimmer is a hand-held motorized equipment that is used to cut grass and level the lawn. The basis of this tool is a rod, on one side of which there is a motor, and on the other - a cutting head. Inside this head there is a metal knife or the required amount of fishing line placed in a trimmer reel. You can use a trimmer to mow grass and weeds in a variety of places, for example, next to fences, trees, and bushes.
Types of trimmers
All modern trimmers are divided into two types. These are electric trimmers (connected to the mains), battery trimmers (which use a rechargeable battery to operate), as well as equipment that runs on gasoline - gasoline trimmers.
Properties of electrical models
To cultivate your garden plot, it is best to use an electric trimmer. This technique can easily cope with weeds. When choosing a tool based on power, you need to take into account the density of the grass. To remove tall, dense weeds, you need to purchase a trimmer with a high power level.
A good choice for a summer cottage is considered to be equipment developed by engineers from companies such as Carver, Huter, Parma and other manufacturers. Note that using the tool from Carver and Huter you can not only effectively remove grass. This trimmer will help you trim the bushes.
Electric trimmers differ in the location of the motor. It can be upper or lower.
If the motor is located at the bottom, then the trimmer is used to regularly trim the lawn grass. You cannot work on such equipment for a long time; you need to give it some time to rest. Additionally, this equipment should not be used when the grass is wet.
The power of overhead trimmers is high. Moreover, such a tool is more expensive equipment than a tool with a bottom-mounted engine. This trimmer has some advantages. For example, it can be used to process wet grass and mow high-height thickets.
Design and features of Carver brush cutters
Each modern Carver brush cutter is a high-tech tool that is capable of mowing grass and clearing bushes in large areas around the home. The design of the models of this brand is based on reliable engines that have passed mandatory testing at the manufacturer. Wear-resistant starting mechanisms are responsible for starting the engines, which will not fail even in emergency situations.
Among the main advantages of Carver models are the highest build quality and well-thought-out design. Each tool is extremely easy to maintain - before lubricating the rod or repairing the carburetor, the owner does not need to completely disassemble the scythe.
Each of the Carver brand models has high maneuverability, which was achieved due to a correctly established center of gravity and comfortable ergonomic handles. This allows you to successfully use the lawn mower in areas with a large number of plantings, pedestrian paths and near fences.
With a lot of advantages, brush cutters and trimmers from the Carver brand are much cheaper than equipment from other well-known brands. This makes it possible for everyone to purchase high-quality garden equipment.
Review of the Huter GGT-1000T petrol trimmer
Currently, gasoline trimmers have become very popular. A gasoline trimmer, or gas trimmer, is a very convenient and necessary gardening equipment.
I recently purchased a similar gasoline trimmer. I spent a long time choosing which trimmer to buy. The main selection parameters were the price ratio and technical characteristics, as well as the manufacturer. After a long search, my choice settled on a petrol trimmer of the HUTER brand, model GGT-1000T. I was satisfied with the technical data and price of this model.
This compact package came with the gas trimmer I bought. But due to its size, it could not fit into it, since the trimmer is not collapsible.
The box contained a cutting knife (I haven’t tried using it yet), a spool of fishing line and a shoulder strap.
This is what the passport for this equipment looks like. It contains a table of technical characteristics of several models of gas trimmers. As for the information about the operation of the lawn mower, the basic information is written briefly, there is a detailed description of the assembly, there is no operation of the trimmer.
This is what the HUTER GGT-1000T petrol trimmer looks like, with a total weight of 7 kg. The design is quite watchable and neat, nothing superfluous. The petrol trimmer has already been put to work.
The petrol mower is a non-dismountable rod, which ensures a longer life for the trimmer. Both friends and store clerks said that the main problems arise with the shaft in the collapsible rod.
The two-piece bicycle handle provides easy control and prevents the petrol trimmer from slipping thanks to its polymer coating.
The right handle contains the trimmer controls, which are connected to the motor via an electrical wire.
The red button is to turn the gas trimmer ignition on/off. Yellow - gas trigger; a little smaller - blocking the gas trigger and protection against accidental activation; if you do not press it during operation, then the fishing line (or knife) will not spin. The round button is a gas lock, that is, during operation you can fix a certain number of revolutions of the cutting element, which reaches 9.5 thousand rpm.
The shoulder strap distributes the weight of the tool evenly throughout the body and provides more comfortable control. I tried working without a belt and with a belt. Very big difference. It's much more comfortable with a belt and your hands don't get too tired.
The shoulder strap is attached closer to the engine with a carabiner.
Here is a 1.35 liter gasoline internal combustion engine. pp., located in the upper part of the structure, which allows you to cut wet grass. When mowing wet grass, white steam appears.
Model GBC 043MC
In order not to make a detailed description of the model and understand all its advantages, you should simply familiarize yourself with the technical characteristics that this trimmer has:
- powerful rod;
- steel shaft with bearings;
- special carbide disc;
- powerful gearbox;
- width of the mowed strip is 23 cm;
- power is equal to 2.2 liters. With.;
- presence of a brake for the engine.
A model with such high-quality characteristics is ideal for professional use. Sometimes the buyer has a question: “How to maneuver a powerful rod and how to lubricate the rod?” The answer is simple: “Maneuverability is excellent, the lubrication process is simple!”