New Holland CR 9080 combine – design and technical characteristics

Since 1975, New Holland combines have been manufactured using advanced Twin Rotor technology, which still occupies pride of place in modern models. These machines are in great demand regardless of the economic situation in the world.

The average cost of Holland equipment is about 75 thousand dollars. The amount is quite impressive even for large farms. Therefore, in the CIS countries, these combines are mainly purchased in used condition, but also at a high cost. Equipped with modern mechanisms and electronics, they are very easy to operate, have great power and speed of operation, and allow you to harvest crops with minimal losses, which is beneficial for agricultural farms.

Differences between New Holland combines

All manufactured models of New Holland combines are equipped with various functional systems, which are created in a wide variety, using the latest technologies, using high ingenuity.

The most interesting devices:

New Holland combine IntelliCruise system

• SmartSlev. This equipment has a hinged connection for the sieves, the fan speed is adjustable, the system design allows you to control the lateral tilt of the machine and the uniform distribution of grain.
• Varifected. A header with a longitudinal reach of up to 50 cm or more of the cutting part, controlled remotely, depending on the type of crop. This allows you to constantly work at high speed.
• Lateral float. A header whose design ensures that the terrain of the area is repeated during operation to obtain the same cutting height.
• IntelliCruise. The electronic system, which constantly ensures optimal operation in various operating conditions of the combine, regulates the loading of the header, which varies depending on the level of productivity of the site.
• SmartSteer. A laser system that corrects the movement of the machine, which controls the compressed and not yet processed area, determining their boundary with an accuracy of 1 cm. Allows you to avoid gaps and overlaps.

SmartSteer system

The lineup

New Holland combines are produced in several model series. Each of them is designed for certain types of work and different operating conditions. Even during their development, it was decided to produce the same type of machines with different performance levels. There are several varieties of them, but in Europe two series of this equipment are produced - one is universal, designed for many types of crops, and the other is small models convenient for small farms.

Design of New Holland grain harvesters

The most common models:

• TC 5000 – for harvesting in small areas with complex geometry.
• CX 6000–8000 are universal, for installing many types of equipment.
• CSX 7000 - have average productivity, used mainly for work on areas up to 1500 hectares.
• CR 9000 – high productivity combines, these powerful machines are designed to work on fields of more than 2500 hectares.

Device Feature

Self-propelled combines, which are produced in several main types, can be configured into any optimal options due to additional equipment, depending on the planned application. Their designs make it possible to optimize work, quickly reconfigure equipment for various crops, automate processes, and avoid downtime for maintenance.

Function for automatically adjusting combine parameters for the crop being harvested

The combines have economical engines that are characterized by high power and at the same time low fuel consumption. The engines are equipped with fans for reliable cooling even in the hottest weather. The operator cabins are comfortable, with an optimal microclimate, good visibility, sound insulation, and vibration protection.

The feeder chamber has an automatic header mechanism, the cutting height is adjustable. The standard factory equipment includes a hydraulic reel control drive. The grain cleaning device has a cleaning fan, three adjustable sieves - upper, lower, for pre-cleaning. For grain storage and unloading there is a bunker with an indicator of its filling.

Series

The NewHolland company offers several series of combines, which, through additional equipment, allow you to configure the version of the machine that will be most optimally suited for the planned application.

Combines of this series are primarily focused on harvesting forage crops and corn, for which various types of headers are designed. Specialized corn harvesters can be used both on young low plants and for harvesting mature plants with hard stems. The versatility of this combine is given by the fact that, if necessary, you can install a proprietary Varifeed grain harvester. The stability of the position of all headers in relation to the ground is guaranteed by the proprietary AutoFloat system.

Features of harvesting forage crops require precise coordination of the actions of both the combine and the simultaneously loaded cargo vehicle. The IntelliFill system, which controls the dimensions of the body and the uniformity of its filling, frees the operator from the need to constantly monitor the position of the truck body.

Specifications:

Specifications

New Holland has developed and produces several different series of combines, differing in performance, dimensions, and functions. Each grain harvesting machine is equipped with special headers for collecting grain; for corn, other types are installed, which are adapted for assembling young plants or already mature ones with hard stems.

New Holland CX7 and CX8 range - technical specifications

Holland TC

These combines belong to the small class. They are designed for small farms, quite efficient and reliable. Thanks to the installation of a large threshing drum, their productivity is quite high.

Combine harvester TS 5070

Technical parameters of TS 5070:

Holland FR

This Holland series is designed for harvesting corn and other crops. Various types of headers are installed for them. A universal combine harvester can be converted into a grain harvester by installing Varifeed equipment for grain harvesting.

Equipment Varifeed

The AutoFloat system regulates the stable position of the header level relative to the ground surface. The IntelliFill system controls the uniformity of filling of the body, which frees the operator from the need for constant monitoring.

New Holland combine AutoFloat system

Technical parameters of Holland FR 700:

Holland CR

The largest Holland combines have high productivity; damage to grains during harvesting is avoided. Models are equipped with 17 or 22 inch rotors. The combine can be equipped with a wide Varifeed header (10 m). If you install the SyperFlex header, you can work in areas with difficult terrain.

Grain header 740 CF Superflex New Holland

The New Holland CR 9080 combine is equipped with an electronic system with up to 50 operating mode settings for different crops. To reduce ground pressure, work on slopes or sticky areas, you can install SmartTrax tracks. They are 24 or 30 inches wide.

Technical parameters of New Holland CR 9080:

Combine harvester New Holland CR 9080

Holland CX

The combines of this series belong to the middle class. They work effectively in any conditions, when harvesting different types of crops.

Technical parameters of Holland CX 8060:

New Holland CX 8060

Holland CSX

Large machines with a 4-drum design designed for threshing and cleaning grain. Laterale models adapted for this purpose are produced for harvesting in hilly areas. The highest slope on which the combine operates reaches 30%.

Technical parameters of Holland CSX 7060:

New Holland CSX 7060

Engine

The New Holland CX 6090 is equipped with a 4-stroke turbocharged diesel engine Iveco Cursor 9, complemented by a Common Rail system. The unit allows the combine to withstand heavy loads. Features of the Iveco Cursor 9 motor:

• fuel efficiency;
• intermediate air cooling;
• modern radiator protection screen with self-cleaning function;
• torque reserve of 25%;
• liquid cooling system;
• high efficiency of the lubrication and starter system;
• possibility of adjusting the boost operation.

The unit meets Tier 3 standards in terms of harmful emissions.

Characteristics of the Iveco Cursor 9 motor:

• working volume – 8.7 l;
• rated power – 245 (333) kW (hp);
• number of cylinders – 6 (in-line arrangement);
• cylinder diameter – 117 mm.

The fuel tank capacity is 580 liters. At an average load, fuel consumption is 49-55 l/hour, which allows you to work longer than a shift without refueling.

Advantages and disadvantages of combines

Automatic cleaning fan speed control system Opti-FanTM

Holland combines, which are advanced modern special equipment, have many advantages over other brands of agricultural machines - high productivity, efficiency, environmental friendliness, the ability to work with full automation of all processes or quickly switch to manual control, etc.

Disadvantages include high cost and the absence of service points for Holland equipment in many CIS regions. Despite this, such machines are purchased by many farms because they significantly increase the efficiency of harvesting.

Related video: NEW HOLLAND CR10.90 combine harvester

Publications on the topic

Mini-harvesters are reliable helpers for grain harvesting

Overview of the capabilities and technical characteristics of the Akros 530 combine harvester

Design and scope of application of the Yenisei 950 combine harvester

The history of conquering the automotive market

From the first day of its founding, the company gained enormous popularity in Europe and America, releasing in 1952 the first self-propelled grain harvester in history. At that time, the invention was considered the height of technological progress and made life much easier for many farmers. For this reason, the combine began to be rapidly dismantled, motivating manufacturers to expand production and create new models.

Today, New Holland is part of the CNH corporation

Thanks to investments and high sales, the New Holland company already in the early 60s became the largest manufacturer of grain harvesting machines in Europe, gaining a complete monopoly over the market. But American engineers did not think to stop there either, presenting in 1975 a unique technology called “Twin Rotor”, which is used to equip combine harvesters to this day, of course, in a modernized form.

New Holland combines are characterized by high productivity, have modern equipment and great capabilities for quick harvesting. In the early nineties, the company continued to improve its product, starting to develop a whole range of high-tech units that would meet the needs of all farmers. In 1999, the company joined the well-known British corporation CNH, deciding to continue to conquer the European market and supply new models of combines.

Today the company has about 20 factories around the world and representative offices in almost every country. The first main office was opened in Pennsylvania, but is now located in Turin, Italy. New Holland's latest technical developments include machines that can replenish their own energy using renewable sources. The corporation gained additional popularity among buyers due to its support of the Juventus football club and sponsorship of many sporting events.

Be sure to read: Combine Don 680

https://youtube.com/watch?v=fpFYed-Q1sQ

Video

Features of New Holland CX 6090:

• full computer control of the header, transmission and power plant;
• gentle threshing mode, which allows you to avoid crushing and loss of the final grain mass;
• automation of key work processes;
• relief copying function, which improves the quality of threshing and harvesting of low-growing and laid-down crops with a minimum level of losses;
• simplified header suspension, allowing you to quickly change devices taking into account additional parameters;
• safety system for equipment on plots with complex terrain.

New Holland CX 6090 has proven itself throughout Russia and the CIS countries. The technique is actively used in Western and Eastern Europe (its popularity is especially high here).

The combine provides high-quality harvesting of small-seeded and grain crops, regardless of agro-climatic conditions. Stunting, high humidity, lodging, severe contamination and uneven grain crops are not a problem for the machine. New Holland CX 6090 is equipped with a precision farming mechanism, including a moisture meter, yield meter and special software. Thanks to the universal threshing system, the combine can be easily adjusted to harvest rapeseed, corn, rice, legumes and other crops.

New Holland CX 6090 is unsurpassed reliability and high efficiency.

PREFACE

This Manual contains requirements and recommendations for operation, the procedure for making the necessary adjustments and maintenance of your new machine.

The machine is designed and created to ensure maximum performance, efficiency, as well as ease of operation and maintenance when working in various operating conditions, with different types of crops.

Before delivery, the machine underwent comprehensive testing to ensure compliance with technical requirements at the manufacturer and at the company's sales office.

Before operating the machine, you must carefully read this Manual, paying special attention to the “Safety Requirements” Section. Keep the manual in an accessible place

The designations “left” and “right” in the text of the Manual refer to the left or right side of the machine from the rear, in the direction of travel of the machine.

If you need advice on the operation and maintenance of the machine, please contact the Company’s commercial representative office. Qualified specialists will provide you with comprehensive assistance. They have at their disposal all the necessary equipment and spare parts to repair and maintain your machine.

IMPORTANT:

This machine is designed and assembled in accordance with the requirements of EEC Directive 98/37/EC. During operation, you should use only original New Holland spare parts and consumables that have high performance qualities.

It is strictly forbidden to make any changes to the design of the machine without the written permission of the manufacturer. Otherwise, the manufacturer is not responsible for consequences resulting from these changes and modifications.

Accessories intended to be used with New Holland equipment must be CE certified.

The manufacturer completes its products in accordance with the requirements of the customer country; for this reason, the configuration of equipment, both standard and optional, may differ from the equipment described in this Manual.

In some drawings and illustrations in the Manual, additional guards and covers, which are required to be installed on machines in accordance with local safety requirements, are shown open for greater clarity. In real operating conditions, all protective devices (shields, covers) must be installed in their places.