How my acquaintance with this crap began: I ordered it from agricultural trading. ru, with accessories. brought. After 3 weeks I went to the garden to visit. I brought it and tried to work with cutters. It loosened the previously dug beds well, but not deeply; it does not maintain the stated depth due to the fact that the chain drive casing rests on the ground. The actual depth on loose soil is 15 cm - disappointed. I tried it on virgin soil - it jumps like a goat, in order to somehow loosen the soil, I walked along the bed twenty times. Then I started trying to install wide lugs through the extensions in order to try out the plow. It turned out they brought the wrong ones. The sealed box with the correct part number contained other extension cords, round on both sides. I called the seller, voiced the problem, it turned out that I was also a fool, I should have looked at what they brought on the spot. It would probably have helped me if I had opened them on the spot, not knowing what they looked like, but the madam on the other end apparently knew better, giving such valuable instructions. In general, she suggested that we come and write a claim for a refund. Taking into account that they no longer had any extension cords, the price was 390 rubles, I ordered it elsewhere. They delivered it within a week. I went to test the plow. I connected the plow hitch, completely, and began to plow the uncultivated soil. The adjusting bolt, where it is inserted into the plow, constantly flew out, the plow was turned out, having suffered, it plowed a hundred square meters of virgin soil normally in about an hour, completely exhausted. I rearranged the lugs to larger ones (at the same time disassembling half of the walk-behind tractor, since the wings interfered with their installation), replaced the plow with a double hiller, and after a week I began to prepare beds on the prepared hundred square meters with a hiller. From the hitch, the hiller constantly flew off the adjusting bolt, it was warped, the bolt itself was also bent, so that it would not jump out, I clamped it with a clamp. With grief in half, in 30-40 minutes I cut the beds and planted potatoes. A month later, it was time to hill up, I attached the lugs, a double hiller and onto the garden. I walked through two beds and cut off the lug extension.
In general, the impression from this walk-behind tractor is the most negative, the body kit is of poor quality, disgusting and unprofessional salespeople, the only use for the walk-behind tractor, in my opinion, is to transport construction waste to a nearby trash heap, and even then on a cart made with your own hands. And only from the hill. Anything else is a pointless waste of energy, nerves and money. I wanted to add all the photos, but the site doesn’t provide it, it’s an internal server error, but it’s a pity, I would like to inform those who are thinking about buying this “walk-behind tractor.” Shame on the manufacturer, at least before serial production they would test the samples in practice, and not mathematically. I went to get a hoe and hill up the potatoes. I don’t know where to throw this unit away.
Manufacturer
The Russian company of the same name produces Champion walk-behind tractors. It was registered in 2005 and has been developing all kinds of mobile gardening and agricultural equipment for more than ten years. Currently, it is one of the leading domestic manufacturers of such equipment.
Among other things, it supplies the market with such units, for example, as chain saws, sweepers, gasoline-free electric generators, etc. As for the walk-behind tractors themselves, today products from this manufacturer are represented by several models that are popular and have earned good reviews from consumers. .
About the Champion brand
A kind and condescending smile is evoked by numerous publications on the Internet in which the “Champion BC9713” is called an “American walk-behind tractor” or, in any case, “made in China from American components and under the supervision of specialists from the USA.” Dealers of small agricultural equipment will not refute this false information that appeared once and was repeatedly reprinted from each other. On the contrary, they will readily confirm to the buyer that Champion equipment is designed and manufactured in the United States and is only assembled in China.
In fact, the “Champion” brand belongs to a Russian trading company (city of St. Petersburg). It traces its history back to 1993, from a regular outlet selling products from the Dzerzhinsky plant, the Biysk Machine-Building Plant and the Inkar production association, namely: gasoline and electric saws “Ural”, “Druzhba”, “Taiga”, “ Parma" and "Inkar".
As market conditions changed, the direction of the company's activities also changed. Over time, under the leadership of enterprising owners, it opened its branches throughout the country, became a distributor in Russia of many well-known brands - “Stihl”, “Husqvarna”, “Oregon”, “Jonsered” “Partner”, and significantly expanded the range of equipment sold.
“Strength and power” is the slogan of the St. Petersburg brand “Champion”.
Gradually, in all areas of trade in electric and gasoline household appliances, the absolute dominance of Chinese-made products became obvious. At this stage, the company's management decided to create and bring to the market its own brand, to position itself in the most affordable price segment, but at the same time having decent quality indicators.
Since 2005, a variety of equipment, entirely made in China, under the “Champion” brand has been presented on the domestic market: saws and trimmers, generators and motor pumps, lawn mowers and high-pressure washers. And walk-behind tractors - about twenty models, gasoline and diesel. An inexpensive and versatile option is the Champion BC9713 walk-behind tractor.
Walk-behind tractors "Champion": reviews from owners about the equipment
Gardeners have a good opinion about the Champion units primarily due to their reliability and good build quality. Consumers also consider versatility to be an advantage of these walk-behind tractors. A large number of types of attachments can be supplied with Champion equipment. And therefore, a variety of work can be carried out on a suburban area using it. Among the advantages of this brand, consumers also include a fairly rich range of models on the market.
Among other things, consumers consider the advantage of these walk-behind tractors to be that they are not too expensive. The price of Champion equipment is in any case lower than its imported counterparts. Consumers also consider the simplicity of their design to be an advantage of walk-behind tractors of this brand. Units from this manufacturer are absolutely repairable.
The Champion machines are very convenient to operate. With their use, you can loosen the soil in the beds, perform weeding, and prepare the soil for planting garden crops and lawns. These motor cultivators are especially good, as many consumers believe, and are suitable for retirees. That is, for those people who are simply no longer able to dig up a garden with a shovel.
Correct setting of the walk-behind tractor carburetor
In order for the walk-behind tractor to operate as efficiently as possible and without unnecessary fuel consumption, it is necessary to adjust the carburetor. If you have the necessary tools and knowledge, this setup can be done at home. But it is still better to leave the carburetor adjustment to a specialist.
Champion walk-behind tractors are indeed in great demand in agricultural work due to their high productivity and ease of operation. And thanks to the variety of attachments, their use can continue all year round.
What, according to consumers, are the disadvantages of walk-behind tractors?
Thus, reviews of this technique from owners of suburban areas are generally quite good. However, of course, the “Champion” units have not only advantages. They also have some disadvantages. Judging by the reviews, the gearbox of these machines may overheat during prolonged operation, for example. Therefore, the units sometimes have to rest for 15-20 minutes.
It is also believed that some Champion models are not very convenient for transportation over long distances. Owners of such equipment often have to buy additional wheels for it. In addition, many summer residents consider the disadvantages of Champion walk-behind tractors to be that their handles are not adjustable. Another disadvantage of some models of this brand is, according to some gardeners, the fuel tank volume is not too large.
Run-in
Break-in for Champion walk-behind tractors is mandatory and is quite simple. AI-92 gasoline is used for this. It is not advisable to use automobile oils for this equipment. The best option would be the type specified in the instructions for the walk-behind tractor. During the break-in process, it is necessary to constantly monitor the oil level, since its lack can lead to dire consequences. During the first start-up, the piston system experiences an increased load, so work should begin at a gas level of one third of the maximum value. Most of the running-in is carried out at medium speeds. After starting, the engine should run for about half an hour, then you can add speed. During this period, it is necessary to test various driving speeds and all available attachments. You can complete the break-in after 5-6 hours of operation. The final step is to change the oil.
At the same time, we must not forget about preventive procedures that must be carried out regularly. Periodic maintenance involves checking the condition of the machine to identify:
- low tire pressure;
- lack of oil in the engine, clutch or transmission;
- insufficient level of tightening of threaded connections;
- damage to the protective casing.
The timing of preventive maintenance should be chosen independently, taking into account the intensity of use. In this case, the walk-behind tractor itself and the filter are cleaned after each use. Otherwise, the service life of the equipment may be seriously reduced.
Champion walk-behind tractors are simple and affordable special equipment that will be the best option for consumers who have little experience working with such devices.
Specifications
Despite some existing shortcomings, summer residents still consider “Champion” walk-behind tractors to be high-quality units, reliable and easy to use. In addition, the technical characteristics of the “Champion” units, according to most gardeners, are very good. At least, according to gardeners, they fully justify their price.
The simplest “Champion” models cultivate the soil to a width of 24 cm and a depth of 22 cm. For more powerful cultivators, these figures are 85 and 30 cm, respectively. Inexpensive units of this brand have only one speed. Powerful cars from this manufacturer can often move in reverse. Different “Champion” models are designed to install from 4 to 6 cutters. Gearboxes on machines of this brand can be installed with worm or chain gears.
Attachments
The most popular types of attachments for Champion walk-behind tractors:
- hillers of various types. used for cutting beds and hilling formed beds. Thanks to the holes in the hiller stand, the working depth can be adjusted to suit specific tasks. The surface of the hiller is treated with specialized powder paint, which extends the service life of the equipment;
- lugs. Designed to improve traction and are one of the most necessary “add-ons” to Champion walk-behind tractors. They are used to perform heavy work, during which standard wheels can get stuck in the ground;
- potato digger. Used for digging up root crops. On most modifications of Champion walk-behind tractors, a hitch is used to install this equipment. The processing depth is adjusted through specialized holes in the rack;
- straight plow. Designed for preparing land for planting and for plowing. Allows you to process soil to a depth of up to 300 mm;
- mounted pump. Suitable for certain Champion models and used for pumping water;
- cutters of various types. Used for mixing the fertile layer and loosening the soil;
- trailer trolley. Speeds up the process of moving bulk cargo and piece items. Unloads by tipping. For Champion walk-behind tractors, trolleys of various characteristics and dimensions are available;
- rotary mower. Allows you to clear the area from grass vegetation, small bushes and dense thickets. Significantly increases mowing speed.
Engines of "Champion" walk-behind tractors
Most models of this brand are equipped with Champion or Honda engines. Both of these options have earned very good reviews from consumers. The motor power of these cultivators can vary between 4-13 l/s. The engine displacement of the most powerful units of this brand is 390 cm 3 . Of course, this is quite a lot for a walk-behind tractor.
Mostly on sale today are “Champion” models with four-stroke single-cylinder gasoline engines. Champion engines on these walk-behind tractors are installed with a vertical or horizontal shaft mounting.
Model BC9713: description and reviews
So, the technical characteristics of the “Champion” mobile blocks are quite good. Next, let's look at what parameters this technique may differ using the example of the BC9713 model. This walk-behind tractor is equipped with a 7-hp Champion G210-1HK gasoline engine. With. According to many consumers, this model is quite reliable. The fuel tank capacity of this car is 3.6 liters.
The BC9713 model has two speeds - forward and reverse. It has a chain drive. This unit plows the ground to a depth of 30 cm with a working width of 80 cm. Among other things, the machine includes a bracket for attaching a lawn mower.
Reviews about the “Champion 9713” walk-behind tractor from summer residents are mostly good. Gardeners include the following advantages of this unit:
low fuel consumption;
ease of operation;
high build quality;
The main disadvantage of this model is the short wings. Because of this, during operation, the machine can throw soil onto itself with cutters. Also, many gardeners advise not to install the wheels of the walk-behind tractor in the lowest position. In this case, unfortunately, they can be torn by cutters. With this position of the wheels, the model can only be transported to a storage location.
Design features and scope of application “Champion BC9713”
All models of Champion walk-behind tractors are usually divided into light and heavy. The first ones. which includes “Champion BC9713”, they have compact dimensions and a simple design.
Overall dimensions and weight of the walk-behind tractor:
- Length – 1,390 m; width – 0.8 m; height – 1,070 m;
- Weight – 75 kilograms.
- The depth of tillage is from 15 to 30 centimeters.
- The tillage width is 0.8 meters.
- Travel speed on running wheels is up to 5-10 kilometers per hour.
The Champion BC9713 walk-behind tractor comes complete with pneumatic wheels and soil cutters. The width of tillage can be adjusted by reducing or increasing the number of tiller segments.
The handles of the Champion BC9713 walk-behind tractor can be adjusted according to height, and the degree of depth can also be adjusted thanks to the presence of a coulter. The handles are rubberized, on one of them there is a correctly and conveniently located “gas” handle. There is a power take-off shaft and wide possibilities for use with a wide variety of mounted and trailed equipment. To protect the engine and operator of the walk-behind tractor from flying clods of earth, a special casing is provided.
“Champion BC9713” is a device that is structurally as simple as possible to use. This walk-behind tractor is made in a durable casing. Like other representatives of this small agricultural machinery, the main structural components of the Champion BC9713 walk-behind tractor are the engine, gearbox, transmission, and mounted tillage equipment. The two-wheeled layout of the walk-behind tractor has three preset positions for greater convenience.
Basic modifications are equipped with a manual starter, chain drive and multi-speed gearbox. Traction control is carried out using special handles with an ergonomic grip. Moreover, these handles can be adjusted
Motoblock Champion VS 1193: owner reviews
Auto mechanic, specializes in agricultural equipment
An integral and important part of any agricultural production, suburb, summer cottage or garden plot is a walk-behind tractor or cultivator. These mechanisms help cope with the labor-intensive processes of cultivating the soil, cleaning the territory and transporting goods. The electronics and technology market offers a wide selection of various domestic and imported options. Therefore, you need to choose a unit depending on the intended purpose, land area and required power.
