Chainsaw STIHL MS 362 S-M

How to start a Shtil chainsaw - the correct procedure

To ensure that your Stihl chainsaw lasts as long as possible, you need to start it correctly.
The level of load that affects the motor and other mechanisms of the tool when they are directly turned on depends on this. To start a chain saw with a cold engine, you need to adhere to the following algorithm:

First of all, the operator must engage the chain brake by pushing its lever forward;
Next, you need to press the decompression valve several times - this will fill the engine cylinder with fuel and make it easier to start the internal combustion engine;
After this, you will need to press the fuel pump;
The operator must then move the throttle position lever to its lowest position;
Then you need to quickly pull the starter rope several times until the engine starts and stalls;
After this, the throttle position adjustment lever must be quickly moved up one position;
Next, you will need to quickly pull the starter cable towards you again. As a result, the chainsaw engine should start;
In the next step, the operator must fully press the throttle lever and hold it in this position. At the same time, you need to move the throttle position lever directly to the uppermost position with your second finger.

At the end, you need to slowly raise the chainsaw and turn off the inertia brake by pulling its lever towards you. As soon as the operator hears a characteristic short-term click, you can begin operating the chainsaw.

Owner reviews

The 326th Shtil model worked in our forestry enterprise for several years without serious failures or malfunctions. In winter, this machine values trouble-free starting; in summer, it values the ability to operate for long periods of time at high-speed modes without forced cooling breaks. Arkady Fedorovich

Four years of low-cost operation for Shtilev chainsaws is not the limit. The model 326 tool with a 16-inch tire for farming is the best option. The relatively high cost of the tool is compensated by its reliability and reliability. Garik

Maintenance and repair

The factory setting of the saw is carried out according to average values, therefore, during operation of the device, the set parameters require periodic adjustments. Adjusting the carburetor of the Shtil chainsaw must be carried out according to the rules; it is necessary to follow the sequence of setting the different modes of operation of the tool.

Adjustment is carried out after cleaning the filter and warming up the engine. The result of the adjustment is a rapid increase in speed in operating and idle modes. There should be no noise or smoke. If the tool is used incorrectly, repairs may be necessary.

The saw is designed to work in difficult conditions; it can operate up to 10 hours a day.

If the new model has not yet expired, then if the unit fails, it must be repaired at a service center. However, replacing parts and installing a broken spring can be done with your own hands - this is not a difficult job, any operator can handle it.

DIY chainsaw repair

Despite the fact that the characteristics of a chainsaw deserve all praise, sometimes there is a need for its repair. This situation occurs when the unit is used incorrectly or in violation of the manufacturer’s recommendations.

Chainsaw Shtil 362 is part of the line of professional tools. This suggests that it is a high-quality mechanism designed for harsh operating conditions. The estimated operating life of the unit reaches 2000 hours, which allows it to be used up to 10 hours a day. It is not difficult to imagine that a mechanism with such operational parameters is characterized by precise assembly and adjustment.

It becomes clear that there is no point in repairing a chainsaw yourself, especially if the warranty period has not expired. In most cases, after do-it-yourself repairs, owners have to turn to specialized services. It’s good if it’s possible to restore functionality there, but there are times when specialists shrug their shoulders.

At the same time, minor repairs, or rather replacement of consumables, can be done independently.

Behind the apparent simplicity of repairs, sometimes there are minor nuances, without knowing which it is impossible to restore the functionality of the mechanism. Therefore, any repairs are recommended to be done in specialized workshops.

Provided you have the skills to perform plumbing work. For example, you can replace a broken starter spring yourself. Installing the spring is a fairly simple operation. You can find out how this is done by watching the video.

Chinese version

Now the market is full of fakes. Many of them are made in China. Since the Stihl chainsaw is in demand, this brand can also be counterfeited. It is difficult to distinguish a copy from an original, but it is possible.

On the original, the serial number is placed on the body in the muffler area and in some other places. Under the muffler there is a marking with the number and name of the brand country. There is also a sticker with this number on the package. If at least one of the numbers does not match, then it is a fake.

Another sign of a fake is the hole that is located next to the drive sprocket. There is no such hole on the original product. You also need to look at the ignition system - Shtil does not produce spark plugs. Another difference is that the original has a dark gray case color, while the Chinese counterfeit is black. A copy is cheaper than the original, but in terms of quality, strength and durability it is much inferior to the branded product.

Basic equipment

Basic equipment:

chainsaw assembly or saw and body parts separately;
universal key for assembly;
instructions for the product;
guarantee;
package.

Country of production and assembly: USA. The country of production of copies is most often China, less often Poland. The price of the original model, recommended by the official representative of Shtil in Ukraine, is 17,699 UAH for a model with a tire length of 40 cm, 17,839 for models with a tire length of 45 cm. It is not known exactly how much a copy can cost, but the approximate range of the cost of fake Shtil chainsaws is two-fold. three times cheaper than the original.

Chinese fake

The modern market is filled with various counterfeits of almost any product. China supplies especially many of these “brands”. Stihl chainsaws are also not ignored as a product in demand.

It is often quite difficult for an ordinary buyer to distinguish a fake from an original. Nevertheless, there are still distinctive features. It's just that not everyone knows about them. The main ones will be, first of all, the serial number of the product.

On the original it is stamped on the body in the muffler area and in other places, depending on the brand of the product. A sticker with the number and indication of the country of origin is affixed under the muffler. In addition, the packaging box must have a sticker with the same number. If at least one of them does not match, this is a fake.

One of the signs of a fake is a hole in the saw bar. It is located in the drive sprocket area. It is missing from the original.

Hole in a fake tire

When purchasing, you need to pay attention to the spark plug. If it is like in the photo, this is a fake again.

Calm does not release the candle.

Fake spark plugs

What kind of goods are produced by Chinese consumer goods can be seen in the video, which tells what happens to a saw purchased without an official dealer.

Chinese Stihl 362

Hi all. I bought a shtilika saw 362 from the gypsies, made in China, for 2500 rubles

who used it? how is work??

If it's a Chinese assembly, then it's fine. But most likely for this price it’s a gypsy assembly. In general, why buy obviously cheap things? Miser pays twice.

MShtil And in our Confiscat store, Shtil 660 is sold not from hand, well, it’s clearly not branded, it’s all covered with Shtilevsky stickers for 2950 rubles. And where is Calm looking??

MShtil wrote: I bought a shtilika saw 362 from the gypsies, made in China, for 2500 rubles, who used it? how is work??

Let's exchange experiences. I have a similar saw. On the plus side, there are all the devices that are found on expensive branded saws. The saw is powerful, lightweight and very comfortable. Cons: oil has leaked spontaneously lately, which is a common problem with all budget saws. The filter had a hole, so I glued it. When the chain came off the tire, the plastic stopper broke within the first second. It is advisable to install an aluminum corner. One piece of garbage was discovered (((the drive sprocket at the end has a truncation (what was it made for?) and that’s why the original chain still works normally, but the new one fits into this truncation and wedges. It’s easy to treat - make a gasket 2-4 thick mm between the engine crankcase and the tire and then the chain moves to the middle of the sprocket; only in this gasket you need to make grooves for oil and for tensioning the chain. For some reason, the handbrake constantly wants to work. It has a very small reserve (inertia) or travel. This is not bad, but the slightest touch - and it works. My original tire is made of soft metal and is all flared. The pluses are the power. I felled poplar 50 -70 cm thick without any problems - it saws and saws. For such a price, a very good purchase. In general, many Chinese products now they have good performance. I now have a mower and this saw. They start from the 3rd start and then rumble as expected. How are you doing? Where is the calm? I’m surprised why a completely normal product is not under its own brand but under a fake. Meaning. After all, the saw is normal.

“All smuggling is done in Odessa, on Malaya Arnautskaya Street”

once said the great schemer to the unlucky Kise Vorobyaninov. Recently they said that all of China is being made in Cherkizon by the hands of Tajiks and Vietnamese. Now I don’t know where. But the most convenient way to distribute this rubbish is through the gypsies, who travel all over Russia and the former CIS. For some reason, I do not rule out that fake China is made in the Far Eastern Federal District, and then distributed, in our case, through Moscow.

Here they offer to buy: chainsaw $34, brush cutter $49. minimum quantity 500 pcs. I can’t imagine how he can work for this money

Hi,dear friend Yongkang Biqi Electric Co., Ltd. Established in 2005, we are specialized in Gasoline chainsaw, grass trimmer, hedge trimmer, etc. www.biqico.com

1) package and quantity: Our min. quantity is 500pcs each model, chainsaw is 2pcs/box which can save freight and charges, brushcutter 1pc/box 2) Certificate: CE, EMC, ISO9001 quality management system certification 3) Payment terms: FOB Ningbo , 30% T/T deposit, balance by the copy B/L 4) Lead time: 15days for 20ft/40HQ 5) pls find attached photos. Advise chainsaw 4500,5200, brushcutter Mod.BC43, BC43-1, multi-function 4 in 1 hegde trimmer are most popular in the market.

In general, Shtil should think about the adequacy of his prices, otherwise China will crush him. For a person with hands, there is still a choice of inexpensive workhorses. Especially about powerful Chinese lawn mowers.

volk1268 For God's sake, don't pay

What can you run into? “By buying secondhand from gypsies, you are buying low-quality goods at inflated prices”

I bought a set of power tools from these "budulai". out of curiosity. So much was revealed there. Details here, with photos and descriptions » >

AVM wrote: What can you run into. “By buying secondhand from gypsies, you are buying low-quality goods at inflated prices”

Well, at the beginning of the topic it says so - “bought from a gypsy.”

AVM wrote: I bought a set of power tools from these "budulai". out of curiosity. So much was revealed there. Details here, with photos and descriptions » >

Nothing! Indicative! Don’t be fooled by bullshit!

leonid777 wrote: here they offer to buy: chainsaw $34, brush cutter $49.

I myself was surprised at these prices. and now think about it - 34 * 30 = 1000 rubles, you can buy it for 3500 rubles, this includes customs clearance, etc. 50 * 30 = 1500 rubles, I bought a mower in a store for 5000 rubles - i.e. real again. Do you know how the store in Mukhosransk works? they take 10 mowers, 3 are left for disassembly, 7 are sold. In general, they are in the black since there is no mass marriage. Little things - yes, the tank is leaking, the shaft is making noise, the gearbox is screwed up - but this is more of a household issue.

LAV1955 wrote: In our village, people practically don’t take powerful lawn mowers from well-known brands. They buy factory Chinese from the office. guarantee,

That’s exactly what I bought into - I think it breaks on the 2nd day, I’ll hand it over and let them repair it for free. It’s still rattling, but the piston repair cost me 2200 rubles with labor. Repairing the piston on the Husk 323 costs 8 rubles - is there a difference?

Specifications

The Shtil chainsaw has a high build quality. Copes with felling forest, removing branches, sawing tree trunks. The tool can also be used in construction from wood or timber. The unit is also used in public utilities when creating landscapes for playgrounds and public gardens.

In addition, the saw is used during renovation of premises. The device has a powerful motor, thanks to which the saw has the following advantages:

economical gasoline consumption;
reduction of toxic gas emissions;
reduced oil consumption for chain lubrication;
ease of use.

The tool can be used for long-term work. Anti-vibration system will prevent vibration and noise during use. The air filter is equipped with a reliable cleaning system. The oil pump has oil supply adjustment, saves fuel and guarantees a long service life of the saw. The device is powered by a 2 MIX M-Tronik engine, which has an air-cooling system and operates on a gasoline-oil mixture for two-stroke engines.

Technical characteristics of the Shtil MS 362 chainsaw:

Assembly made in the USA. The brand is located in Germany.
Power - 3.4 kW.
Fuel consumption is reduced by 20%.
Engine capacity - 59 cm³.
The chain thickness is 1.6 mm.
Fuel tank volume - 0.6 l.
Oil tank capacity - 0.325 l.
Tire size - 45/45 cm.
Weight - 5.9 kg.

Distinctive features

The STIHL 362 chainsaw is equipped with a 2-MIX series engine. This gave considerable advantages in comparison with old modifications:

increased efficiency in fuel consumption;
reduction of emissions of harmful gases;
reducing oil consumption for chain lubrication;
ease of use of the saw.

These and other positive aspects made it possible to make the chainsaw the most popular in comparison with others.

Economical. The STIHL MS 362 saw consumes 20% less fuel in operation compared to its analogues, which have a traditional series engine. This is already a tangible saving on your budget.

Preservation of the environment. Due to reduced fuel consumption, the emission of harmful exhaust into the atmosphere is significantly reduced. In digital terms it reaches 50%.

Chain oil consumption can also be reduced by up to 50%. This is achieved by the fact that the oil supply system to the chain doses its amount depending on the type of wood. Saving chain lube also has a positive impact on the budget.

Ease of use of the saw. There are several of them here. This enlarged filler hole of the fuel tank, the ability to open it without the use of special tools and other innovations in the design make the saw much more convenient to handle.

Specifications

Improved technical characteristics attract attention when choosing a saw. Engine displacement 2-MIX 59 cm³. Its distinctive feature is the possibility of more economical fuel consumption

This is achieved by changing the combustion chamber purging process. Combustion of the fuel mixture occurs completely due to its swirl.

Its distinctive feature is the possibility of more economical fuel consumption. This is achieved by changing the combustion chamber purging process. Combustion of the fuel mixture occurs completely due to its swirl.

Engine displacement 2-MIX 59 cm³. Its distinctive feature is the possibility of more economical fuel consumption. This is achieved by changing the combustion chamber purging process. Due to its swirl, combustion of the fuel mixture occurs completely.

Engine MIX-2

With a fuel tank volume of 0.6 liters, the capacity of the oil tank for chain lubrication is reduced to 0.325 liters. Reducing the size made it possible to increase the strength of the mechanisms of the entire engine as a whole, which had a positive effect on the durability of the saw.

The anti-vibration system has undergone significant changes. The installation of metal springs and rubber dampers significantly reduced the vibration of the engine and operating handles.

The air filter design has been improved to extend engine life. The air enters the filter through a pre-cleaning system, where all large particles (dust, sawdust) are deposited. By the way, thanks to this, the service life of the filter itself also increases.

The engine carburetor is equipped with a special compensator, thanks to which all engine operating parameters are maintained at the same level, regardless of how dirty the air filter is.

The chain brake operates in manual and automatic mode. This creates additional convenience for the worker and at the same time increases his safety.

The starter is equipped with a damper that smoothes out the recoil shocks that occur when starting the engine, making the start itself smooth and soft.

The weight of the Stihl MS 362 chainsaw including refueling fluids is 5.9 kg.

Appearance of Stihl 362

Information support

Detailed instructions provide a full range of information on preparing the saw for operation, maintenance features, and safety rules for sawing work.

Guided by its recommendations, the operator can correctly adjust the carburetor, chain tension, and perform preventative or maintenance repairs with his own hands.

For long-term and trouble-free operation of the saw, the manufacturer recommends using branded spare parts and consumables. The use of motor and chain oils from other manufacturers is permitted provided that their quality and other technical characteristics are as close as possible to the stated requirements.

Interesting Facts

The distinctive features of a fake and an original “Shtil” saw mentioned above will allow you to choose the right tool without overpaying for a “left” copy. However, there is one more subjective aspect by which you can additionally make sure that you are purchasing an original made in Germany.

This factor is connected with the fact that German manufacturers use a unique marketing policy. For example, if a product is sold at a fixed price in a city or country, its price should be identical in other places where the original products of this brand are sold.

The best powerful Stihl chainsaws from 4 hp.

Professional-grade chainsaws have high power. They are suitable for those who need to care for large quantities of plantings and process large quantities of wood for building construction and carpentry. The equipment is designed for heavy loads. The rating presents the best high-power chainsaws from a reliable German brand.

STIHL MS 310

A professional-grade chainsaw designed for experienced users and beginners. Indispensable for processing plantings, collecting firewood and construction.

Equipped with a 4 liter two-stroke engine. With. for fast and precise cutting.

Anti-vibration system prevents kickback. The chain is tensioned from the side, which eliminates direct contact with sharp parts.

Starting and braking are smooth. The compensator ensures stable engine speeds, economical fuel consumption and reduced emissions. There is also a heated carburetor, making the equipment suitable for winter work.

Characteristics:

power - 4 l. With.;
tire length - 40 cm;
engine capacity - 59 cubic meters. cm;
weight - 5.9 kg.

Advantages:

high-quality construction;
performance;
smooth start;
quick cut.

Flaws:

high price;
small warranty from the manufacturer.

STIHL MS 661-28

Powerful chainsaw with high performance. Equipped with a 2-MIX motor for fast and precise cutting.

M-Tronic technology is designed to recognize cold and hot starts to maintain stable rpm and good acceleration performance.

The equipment is suitable for working with large-sized wood and can withstand heavy loads. The tire length is 71 cm. Fuel is supplied automatically.

Characteristics:

power - 5400 W;
tire length - 71 cm;
engine capacity - 91.1 cubic meters. cm;
oil tank - 0.7 l;
weight - 7.4 kg.

Advantages:

power;
comfortable handle;
spacious fuel and oil tank;
performance;
efficient work in winter.

Flaws:

difficult maintenance;
heavy weight.

STIHL MS 880-47

A professional-class model that can withstand even extreme loads. Suitable for cutting large-sized wood.

The saw is equipped with an 8.7 hp engine that provides high performance.

The anti-vibration system makes working with the saw as comfortable as possible and prevents disturbances in blood circulation in the hands.

The chain is tensioned from the side, thereby eliminating direct contact with the cutting parts. The decompression valve ensures smooth and quick engine starting.

Characteristics:

power - 6400 W;
tire length - 120 cm;
engine capacity - 121.6 cubic meters. cm;
oil tank - 0.7 l;
weight - 10 kg.

Advantages:

anti-vibration system;
power;
easy cutting of thick logs;
comfortable handle.

Flaws:

noisy;
heavy.

STIHL MS 661-20

A reliable chainsaw with an ergonomic handle that can withstand heavy loads. Suitable not only for experienced users, but also for beginners.

Equipped with a 5400 W motor and a 50 cm long tire.

The protective casing ensures safe use, and the anti-vibration system makes operation convenient. The heated carburetor makes using the tool in winter as comfortable as possible.

During operation, noise of less than 120 dB occurs.

Characteristics:

power - 5400 W;
tire length - 50 cm;
engine capacity - 91.1 cubic meters. cm;
oil tank - 0.7 l;
weight - 7.4 kg.

Advantages:

thoughtful design;
power;
fits comfortably in the hand;
productive.

Flaws:

high price;
expensive spare parts.

STIHL MS 361-18

Chainsaw with a powerful engine, suitable for domestic and professional tasks. It can be used not only in logging operations, but also for thinning small forests and medium-density plantings.

Made from high-quality materials that are resistant to mechanical damage.

Equipped with a 4.6 hp two-stroke engine. and a decompression valve for a smooth start of the device. The presence of a heated carburetor allows you to work with the equipment in winter.

When working with a chainsaw, there is practically no vibration, and the noise level does not exceed 120 dB.

Characteristics:

power - 3400 W;
tire length - 45 cm;
engine capacity - 59 cubic meters. cm;
oil tank - 0.7 l;
weight - 5.6 kg.

Advantages:

powerful;
durable;
hardy;
Suitable for work in any weather.

Flaws:

high price;
expensive service.

Stihl chainsaws. How the transfer of production to China affected the quality of the tool

Hi all! Today I want to tell a story that I learned in detail at one of the Stihl seminars last spring.

Namely, the transfer of Stihl production to China from the beginning of 2012. I will consider the quality of changes on saws of the MS 180 series, because... they are the most popular in our country, primarily because of the price.

It all started when the company realized that the time had come for expansion and the factories in Germany, the USA, and Brazil were not enough to cover the request from customers.

By the first digit of the serial number on the Stihl instrument you can determine its country of manufacture: 1- Germany 2 or 5- USA 3- Brazil 8- China

The choice to build a new plant fell on China for two reasons:

1. Economic

feasibility and profitability of production.

2. Huge domestic market

sales in China itself.

The first saws on the line were saws of the budget MS170 series, followed by the MS180 series.

Advantages of Chinese release:

Since production is automated, and the plant built in China was the last, it can safely be called the most modern. The build quality and fit of parts is close to ideal.

In terms of clearances and layout, the Chinese MS 180 are better than the German ones, and the price in foreign currency is cheaper! (in our market the price simply has not changed due to the jump in rates. Believe me, it’s great when you can buy a good saw for only 13 thousand rubles).

Shtil recently launched a promotion to extend the factory warranty to two years

Negative consequences of Chinese production:

1. The quality of the raw materials themselves. For example, Chinese plastic Shtil does not have such good strength characteristics.

2. Quality of the sawing set. The tires and chains installed in the base of these saws are cheaper and have a shorter service life compared to analogues from the USA and Germany.

Scope of application

The STIHL MS 362 chainsaw meets all the requirements for medium-power professional tools. Created specifically for performing various tasks in forestry, it successfully copes with felling trees, pruning branches, and logging. In all areas where sawing of wood is required, Shtil 362 is successfully used in individual households.

Cutting firewood for the winter, felling obstructive or old trees in the garden or country house, cutting branches when forming the crown of a tree - this saw can do everything. It can also be used in construction. Trimming of protruding wooden elements is carried out instantly. True, a caveat must be made here - it is not rational to use this saw in construction for cutting small items. For these purposes, there are chainsaws of a lower class. But if it is not possible to purchase a second saw specifically for construction, then Shtil 362 will successfully cope with all such problems.

The saw is popular with housing and communal services workers, especially when beautifying parks and squares. It also has worthy applications in other repair and restoration work.

Thanks to its positive qualities, the Shtil 362 chainsaw has found wide application in all spheres of the national economy, including individual ones.

Reviews and prices

Vasily Sergeevich, entrepreneur

I bought a Shtil MS 362 chainsaw to work on my summer cottage and decided to make a wooden extension to the house. The price of the Stihl MS 362 chainsaw in the store is 17,800 rubles. I think it’s an excellent tool; it does an excellent job of sawing boards, timber, and wooden blanks. You can perform work using this device for quite a long time, it does not overheat, does not vibrate, and does not make noise. I'm happy with the tool.

Our farm is engaged in logging. The work uses chainsaws of the Stihl brand; the devices are distinguished by high build quality and reliable operation. These models were purchased because they allow for large volumes of wood harvesting. The devices are working properly and have not failed yet.

I use a Shtil chainsaw at the dacha. Using this tool, I built a pantry and utility room for storing tools and other useful household items. The saw is characterized by high power, absence of vibrations and shocks during operation. The case is durable, the chain is strong, and when turned on, the tool quickly picks up speed. I have never repaired a saw, but it has been working for 2 years already.

Tests

What should I say? My 35 centimeter chainsaw passed the severe tests with a half-meter linden tree with a bang! When I started sawing, I myself didn’t believe in the outcome, but in vain. Of course, I’m not going to cut down wood for it on an industrial scale, but here you inevitably begin to respect German quality.

Plus amazingly low chain oil consumption. At first it seemed to me that it was not lubricated, but no. Everything is just orderly, as the forum members wrote. So far only positive emotions.

This post is not an advertisement. I don't sell Shtil equipment, I stand for quality! If something goes wrong, I'll write. But a one-year warranty for such equipment is a serious statement of quality; for comparison, my Energomash was given a three-month warranty.

Ignition system failure

If the equipment fails, it is necessary to check the ignition system, and more specifically, the spark plug itself. If the plug is dry, it means that fuel is not getting into the cylinder, and therefore this is not the cause. If there are traces of the fuel mixture on the spark plug, you need to check the correct operation of the carburetor, as well as its adjustment. The spark plug must be wiped and dried, and then turn off the mixture supply and turn on the ignition. These actions will help remove excess fuel mixture and ventilate the combustion chamber. After this, you can put the candle back in place and try to start the saw again.

If there is soot on a given part, the reason sometimes lies in the use of low-quality oil. Another reason may be incorrect proportions of the fuel mixture and oil. In this case, the spark plug will need to be cleaned of carbon deposits, washed and the electrodes cleaned.

Please note that the distance between the electrodes should be no more than 0.65 mm

If there is soot on the spark plugs, you should check to see if there is a spark. To do this, it is necessary to secure the ignition cable to the spark plug, and fasten the nut to the cylinder with pliers. After this, the starter starts. If there is no spark, change the spark plug. If replacement does not work, check the wiring and all connections.

Another cause of failure may be a failed flywheel. To unscrew it you will need a special key, as it is screwed very tightly.

To block the shaft from turning, it is necessary to remove the spark plug and install a piston stopper through the resulting hole. Under no circumstances should you block the flywheel with a power screwdriver inserted between its ribs and body, since the flywheel blades will not be able to withstand the load and will break off.

After the piston is locked, the nut is unscrewed. When it is slightly loosened, its upper part is level with the tip of the shaft, at this moment you can install a metal drift on the nut and hit it. This way the flywheel will jump off the shaft and can be removed without much effort.

Headset

The cutting unit is a set of wear-resistant Rollomatic-E guide bar 40 cm long and a 36RSC saw chain with a 3/8 inch pitch, driven by a sprocket crown.

Complete cooling and lubrication of the chain is implemented using Ematic technology. The system, through a pump with adjustable capacity in automatic mode, supplies oil to the working area from a 325 ml tank built into the saw body.

A characteristic feature of the headset is the lateral placement of the saw chain tensioning device. In the event of a traumatic situation, its progress is promptly blocked by the inertial emergency brake. The switch is activated by a slight force on the underside of the safety shield.

STIHL

Technical characteristics of the Stihl MS 362 chainsaw

Displacement: 59.0 cm3 Int. cylinder diameter: 47 mm Stroke: 34 mm Power: 3.4 kW (4.6 hp) Engine speed at idle: 2800 Permissible highest speed with cutting set: 14000

Electronically controlled magneto Spark plug: Bosch WSR 6F, NGK BPMR 7A Gap between electrodes 0.5mm

Diaphragm carburetor with built-in fuel pump Fuel tank volume: 0.60 l.

Saw chain lubrication

Fully automatic oil pump, operating depending on the speed, with a rotating piston - additionally manual adjustment of oil flow. Oil tank volume: 0.325 l.

Saw set

Rollomatic guide bars

Cutting length (3/8″ pitch): 37, 40, 45, 50 cm Groove width: 1.6 mm

Rapid Micro (36 RM) 3652 Series Rapid Super (36 RS) 3621 Series Rapid Super (36 RS3) 3626 Series Pitch: 3/8″ (9.32 mm) Drive Thickness. links: 1.6 mm

7 teeth for 3/8″ (ring chain sprocket) 7 teeth for 3/8″ (profile chain sprocket)

Standard equipment

Basic equipment includes:

The quickstop brake is a safety device during operation. It can be activated by pressing the front stop with your hand. In case of strong recoil, it automatically stops.
Anti-vibration system. Created to prevent chronic circulatory disorders in the hands.
Condenser for carburetor. A device that reduces emissions and fuel consumption reduces the frequency of cleaning the air filter. The latter becomes necessary only with a significant reduction in power.
Single lever control. Hot, cold start, operation and shutdown are controlled by one lever.
The Ematic lubrication system is created by the special design of the bar and chain. As a result, oil consumption is reduced by half.

How to distinguish Chinese counterfeits of Shtil chainsaws

The key word in the last phrase is “practically.” There are still differences between the original Calm chainsaw and the fake. Therefore, even a non-specialist will be able to identify a fake by packaging, appearance, components and price.

Package

Modern technology allows scammers to copy the original box for Stihl chainsaws. However, the dimensions of the branded packaging are a couple of centimeters larger than those of the fake. In addition, a sticker must be placed on the box with the original Calm chainsaw indicating:

models;
country of origin;
barcode;
serial number.

In this list, special attention should be paid to the nine-digit serial number, which is assigned to each Shtil chainsaw and is necessary for servicing the product in the service centers of this German company. The first digit in this number indicates the country of origin (1 - Germany, 2 - USA, 3 - Brazil, 4 - Austria, 5 - USA or UK, 8 or 9 - China). The serial number in the form of a stamp on the muffler and a sticker on the back of the case must be present on any branded Shtil chainsaw.

If these three numbers on the packaging and body of the product differ in at least one position, it is not an original, but a fake. In addition, the fake is unlikely to be decorated with the inscription “Made in China”

The serial number in the form of a stamp on the muffler and a sticker on the back of the case must be present on any branded Shtil chainsaw. If these three numbers on the packaging and body of the product differ in at least one position, it is not an original, but a fake. In addition, the fake is unlikely to be decorated with the inscription “Made in China”.

Accessories

If the packaging does not cause suspicion, then you should carefully examine the contents of the box. Included with a branded Stihl chainsaw are the following:

instruction manual with version in Russian (without grammatical errors);
a proprietary tool set consisting of a multi-purpose screwdriver and a spark plug wrench (each of these wrenches must be engraved with the company logo).

In addition, the original tire is packaged in a cardboard case, and the chain is placed in a separate package. The case and packaging must be labeled Stihl.

The presence of a fuel canister, several screwdrivers and other parts in the kit, as well as cellophane packaging of the tire are clear signs of a fake.

Appearance

It is not difficult to distinguish a fake from an original by appearance:

Pay attention to the quality of the plastic parts, which should not have any defects in the form of burrs, sagging, scratches and obvious marks from the mold. Check the presence of the company logo (engraving only) on the muffler, fuel tank cap and screws on the inside

All screws on the product must have a proprietary “star”-shaped screwdriver slot; The product tire has only one hole. The presence of an additional window for lubrication is a clear sign of a fake. There should be an "S" on each intermediate chain link and the two large nuts on the left side of the saw. The air filter holder must have the product number engraved on it.

The filter itself is made of dense material with a white outer and brown inner surface. The branded product has a bright orange trigger. The brake is secured on both sides. The branded chainsaw is equipped with special covers with the company logo, which have a patented design, for the fuel and oil tanks. There must be a stamp with the serial number on the body of the product (next to the muffler). A sticker with the same number is placed under the muffler. In 2015, the appearance of all Stihl chainsaw models was updated. Therefore, now the original and the fake can be distinguished by color, which is not so rich in fakes.

Any deviation from the norm is a sign of a fake.

Price

The cost of a fake Shtil chainsaw usually differs from a similar original model by approximately two times. Therefore, prices for a simple fake start at 5 thousand rubles, and a branded model should not cost less than 10 thousand rubles.

However, this indicator should not be decisive when choosing a chainsaw, since some “businessmen” deliberately inflate prices for counterfeit goods. Therefore, when buying a tool at any retail outlet with the exception of Stihl brand stores, try to bargain.

If the seller falters and lowers the price, then he is clearly trying to sell off a fake, since the branded products of this German company, by definition, cannot be too cheap.

Malfunctions and repairs of the Shtil MS 362 chainsaw

Question: tell me what is the problem with the Shtil 362 chainsaw?
Every time you need to blow out the carburetor before starting it, you can’t blow the piston dry. Answer: The gasket needs to be replaced.

Question: Why, when the Stihl chainsaw heats up, does the chain start to spin at idle?

Answer: I’ll share a little experience in repairing the Shtil ms 362 motor chain saw. The problem was that after the saw warmed up, after about 10 minutes of operation, the chain began to spin at idle; the more it warmed up, the more it spun. If you stop it forcibly, the saw will stall.

If you try to turn the drum itself, it goes slowly, but after the chain saw stands, everything becomes normal, the chain begins to spin easily. Replacing the clutch did not bring any results.

It turned out that the problem was in the oil drive, the one located behind the clutch. The bushing turned out to be squeezed out; replacing it with a new one completely eliminated the problem.

Question: poor oil supply on the Shtil 362 saw, what should I do?

Answer: Does a tank of fuel require 2/3 of a tank of oil? If yes, then try changing the oil - it may be a little runny and it comes off the chain a lot. If not, check whether the regulator is actually open to maximum. If this is done, then replace the pump. The plunger may be worn. (it can also be replaced, but it doesn’t always help.

Question: Please tell me the markings of the bar and chain for rip sawing on the Shtil MS 362 chainsaw.

Answer: Tire (45cm) - 30030006317; Chain 63PMX 66 links 3/8 Stihl - 39990000066; Prof. flail wheel 3/8″ 7 stars. - 11256402004.

Question: Tell me, why can gasoline leak into the air filter of a chainsaw?

Answer: Problems with the carburetor.

Question: The shtil ms 362 chainsaw began to have difficulty starting, I think something is clogged. The air filter is normal, I even tried it without it - you pull it ten times - I unscrew the spark plug and it is dry. If you start it, you have to hold the gas; if you let it go, it stalls at idle. What could it be?

Answer: Remove the muffler and check the condition of the piston. Vertical furrows are possible. Or, when the piston is lowered, the area on the intake side is visible - there you can see traces of abrasive wear on the cylinder surface.

You can also indirectly check the condition of the piston using the starter. You need to lift the saw by the starter handle. If it does not go down, the condition of the piston is very good. If it gradually slides down, in such jerks, then the condition is average, performance is preserved.

Question: Why does the flywheel key break off on a Stihl ms 362 chainsaw?

Answer: incorrect installation. The nut is overtightened or, on the contrary, not tightened.

Question: Tell me, who has encountered this? The Shtil MS 362 chain saw is new, gasoline is constantly leaking, and it’s impossible to determine where it’s leaking from. The more gasoline in the tank, the more it leaks.

Answer: Fuel tank breather. You can see it by removing the starter. It may leak a little. Do not operate the saw with a full tank. Refueled - work. If the tank is not full and is not placed on the left side, it’s okay. But if the tank is leaking and the tank is not full, you should get it serviced while it’s still under warranty.

Question: chainsaw Stihl 362, when operating at speed without load, the saw chain rotates and even at minimum load the engine stops, feels the load, what could be the reason, the clutch may be faulty

Answer: Problems with the carburetor. The settings may have been lost.

Question: I have a Shtil ms 362 chainsaw, about 6 years old. This is the problem. When you start the saw, it works for a while, and sometimes immediately, at full throttle, it starts to think and does not develop power. It's like he's choking, but he's still puffing.

Letting go of the gas will stall. And it won't start. The gasoline is fresh. I changed the filters. The muffler is clean. The carburetor was also cleaned. And this problem is not permanent. Yesterday it was like this, but today it works like clockwork. I sinned on the candle. But she's fine.

Answer: I would start by checking the seals and bearings, do a pressure test and you will see. Pressure testing means testing using reduced pressure. When the piston is sucked in, this pressure rises, due to the lack of internal counter pressure, the crankshaft seal tongue.

If the indicated pressure lingers, or the pressure rises within 20 seconds to no more than 0.3 bar, then the shaft sealing rings are working properly. But, with a further decrease in pressure in the crankcase, it is necessary to replace the crankshaft sealing ring.

Question: I read somewhere about lubrication of the bearing in the tire of the Shtil 362 chainsaw. But there is no hole for lubrication on my blade, that is, I shouldn’t bother about this?

Answer: On Shtilevsky tires there is no such hole, the bearing on the tire is lubricated with oil, which also lubricates the chain, this is of course a plus, but there is one thing, do not saw with the tip of the tire at high speeds, you will burn the bearing, this is a minus.

Question: I was interested in the service that if black liquid flows between the cylinder and the exhaust outlet, then this is due to the running-in of the saw.

If the run-in has already been carried out and such problems appear, what should I do? Is it possible to continue using it and how to get out of the situation? And the spark plug is also bombarded with unburned liquid black mixture and the exhaust gases are wet and black.

Answer: You can operate it, but you need to ventilate the combustion chamber, change the spark plug and wipe off any leaks. And in the future, do not repeat the run-in and do not allow the unit to operate at idle speed for a very long time.

Question: A friend is changing the piston on a Shtil 362 chain saw; he bought a Chinese kit. They wanted to put two gaskets between the crankcase and the cylinder.

The goal is to slightly reduce the compression ratio to reduce the negative impact of low-quality gasoline. Do you think it makes sense? If so, what thickness of gasket would you recommend?

Answer: How are you going to implement this? On this model, the connector goes in the middle of the crankshaft bearing seat. And there are no gaskets, everything is sealed. With the degree of compression, the compression will go away.

And on Chinese piston engines it rarely exceeds seven kilos. And let a friend check the seals for elasticity. And when assembling, there is no need to apply sealant under the seals!

Question: The saw starts normally, when it starts, it runs at high speeds and doesn’t reset, doesn’t want to, what should I do to make it work at idle speed?

Answer: Press the gas trigger.

Question: The Stihl ms 362 motor chain saw does not draw fuel from the tank. I washed and cleaned the channel into the combustion chamber. What could be the reason?

Answer: There is a problem with the breather (the valve that creates vacuum in the fuel tank).

Question: On a Stihl MC362 chainsaw, is it possible to replace only the burnt-out piston, or does it need to be replaced together with the cylinder?

Description

Chainsaw Stihl 362-ms series is an innovative development of Stihl. Refers to a new generation of chain saws with an optimally selected set of technical characteristics. The main advantage of the chainsaw, in addition to high power, is easy maintenance - all key components of the saw are freely accessible for cleaning or adjustment (air filters, chain).

Considering the power of the chainsaw, its main area of use and purpose is work on private and municipal forest plantations, wood harvesting on a professional scale, etc. The power of the Shtil 362-ms chainsaw is 3500 W, the engine capacity is 59 cc. According to reviews, the original chainsaw rarely needs repairs and rarely fails, which is why the Stihl 362-ms is very popular among professionals.

Operating and maintenance instructions

During scheduled maintenance sessions the following is performed:

external inspection of the chainsaw, cleaning of sawdust and oil residues;
oil change;
cleaning the fuel and air filters;
chain tightening;
chain lubrication control;
carburetor adjustment (no more than once a year).

To use a chainsaw safely:

carry out assembly, first start-up of the saw, running-in and subsequent cutting of a log or cutting down a tree strictly according to the instructions;
Wear protective clothing and equipment.

Carburetor failure

The Stihl carburetor is characterized by the presence of only one screw, which is responsible for adjusting the idle speed (idle speed)

During operation of the equipment, it is very important to pay attention to the frequency with which the screw rotates at idle. These parameters can be adjusted by checking the air filter and spark protection valve

The following signs indicate that the chainsaw carburetor requires adjustment:

the engine starts very difficult and turns off almost immediately;
high fuel consumption, strong exhaust;
The factory settings of the chainsaw have been reset;
improper operation of the air purification system;
worn piston system.

It is worth immediately drawing your attention to the fact that adjusting the carburetor of a saw is a rather complex process. If the equipment suddenly stops working, the following actions should be taken:

Open and close the fuel tank cap.
Remove and dry the candle.
Ventilate the combustion chamber.

Features of STIHL chainsaws

The choice of STIHL chainsaws by professionals is largely determined by the presence of advanced technologies, first used and brought to perfection on products of this brand. Each of them deserves separate mention.

2-MIX technology

Exhaust gases from any internal combustion engine adversely affect the environment and human health. The 2-MIX technology implemented on engines used by STIHL reduces fuel consumption and optimizes the process of complete combustion. Therefore, even the most powerful chainsaw of the Stihl family emits a minimum of harmful substances.

2-MIX technology reduces fuel consumption

Catalyst

The muffler of most types of Shtil hand chainsaws can be equipped as additional equipment with a catalyst, on the surface of which almost complete combustion of the unburned fuel in the cylinder occurs. Its use reduces the emission of harmful organic substances by approximately 5 times.

The catalyst reduces the amount of harmful substances by 5 times. Note! The use of a catalyst increases the cost of already expensive gasoline saws from this manufacturer, so it is used only when clearly necessary.

Air filter

The company's engineers pay great attention to the purity of the mixture burned in the engine. Features of the Shtil air filter that simplify its maintenance and extend its service life:

large volume;
combination of cyclone and fabric layer;
Possibility of washing with water or gasoline.

STIHL air filter

Intelligent engine

On Stihl carburetor engines, an electronic system for regulating the parameters of the air-fuel mixture is implemented. It distinguishes cold starts from hot starts and optimizes engine operation under stable operating conditions. This makes starting easier and results in significant fuel savings.

Engines regulate the parameters of the air-fuel mixture

Decompression valve

The air that is in the cylinder has the properties of a spring, which interferes with the movement of the piston during the starting period. All STIHL engines are equipped with a special decompression valve. It is opened before starting, which prevents excess pressure from developing when the starter is turned. After the first flash of the fuel mixture, it automatically closes and the engine operates normally.

Special decompression valve

Carburetor heating system

Carburetor icing in cold weather is a serious starting problem. Stihl engineers installed a heating element on their equipment, powered by a current generator connected to the flywheel. The thermal relay automatically turns on the circuit at temperatures below +10°C.

Carburetor heating system Important! This option is very useful for professional work in harsh climates

Electric handle heating system

Heating the handle creates comfortable conditions for the operator’s hands during severe frosts and prevents snow from sticking and ice formation. This greatly reduces the risk of slipping and causing serious injury.

What carburetors are used on Chinese chainsaws

The most optimal carburetor designs for chainsaws were developed by the world's leading manufacturers - German Stihl, Japanese Walbro and others. These top developments are hard to beat. Therefore, most Chinese manufacturers copy the best models.

Some are nameless, from an unknown manufacturer and do not even have markings. They are simply offered for a specific chainsaw model. For example, a carburetor for a Stihl MS 361 chainsaw.

Others have brand names of well-known brands.

Still others have their own catchy names - in Russian transcription King Kong, Technopark, Rezet and others.