Excavator EO 2626: technical characteristics

The EO 2626 backhoe loader is a universal, multifunctional excavator device with a wheeled mode of movement. Thanks to an extensive range of attachments, it can perform a wide range of work, but is mainly used for digging holes, pits, trenches, as well as loading and unloading within construction sites. As standard, it is equipped with a front loader and a boom with a bucket.

Purpose

The EO-2626 excavator has a fairly wide range of applications, namely, it can be used in agriculture, various industries, forestry, construction or during dismantling, road repair work, as well as in public utilities.

Basically, the machine is used to carry out various excavation work, namely digging pits, trenches and filling them; creation of embankments; leveling work sites, as well as developing wells. In addition, the vehicle can transport any cargo over short distances; perform loading and unloading operations of bulk materials (loose soil, sand, gravel, crushed stone, and so on); clear the area of industrial waste (during dismantling work). In public utilities, an excavator is used for its intended purpose - loading and digging, but in the winter, most often the equipment clears sections of streets, roadways and areas of various industries from a large mass of snow, using its standard attachments.

It is worth noting that in some cases EO-2626 is used to clean the bottom of small and shallow reservoirs, as well as rivers. Of course, this is observed extremely rarely, since there are special machines designed for this kind of work, but still, the use of an excavator in this area cannot be called impossible.

Excavator EO-2626: application

The EO-2626 wheeled excavator-loader is designed for mechanization of small-scale excavation work. Due to its design features, the machine can be used in reclamation construction, agriculture, loading and unloading operations, including with complex loads.

EO-2626 is adapted for operation at temperatures from -40 to +40 degrees. Can be used to develop soils from categories I to IV. According to experts, the excavator is a typical example of Soviet-style equipment: durable, repairable, easy to operate and maintain. Operating an excavator does not require high qualifications.

Device and design

In the basic configuration, the excavator has the following features:

The hydraulic distributor is made in Italy, giving high performance at the same time as smooth operation.
Telescopic device with a shiftable digging axis, which allows you to work even in small areas
Front loader and rear bucket with boom.
The folding direction of excavator equipment is perpendicular to the movement of the machine, reducing the volume of equipment.
Spacious cabin with wide glass area for improved visibility.
Convenient electrically controlled wiper and washer.
Equipped with a heating system cabin .

Additionally, EO 2626 can be equipped with equipment for bulldozing work, a hydraulic hammer, a drilling rig, a crane with a hook, etc.

Dimensional data:

Length – 7900 millimeters.
The width of the rear wheels is 2400 millimeters.
The total height of the structure is 3900 millimeters
Ground clearance – 190 millimeters.

Modifications

The EO-2626 excavator has only one modified version:

Modification EO-2626-01. This version has a more modern design and additional equipment. The design has been slightly improved, which has made it possible to achieve increased stability when performing earthmoving work. In addition, the boom and arm have been improved in terms of strength, as their designs have also undergone some changes.

In terms of overall dimensions, the modification was slightly smaller than the base car. This was achieved through the use of a new perpendicular folding scheme of the hydraulic manipulator relative to the axis of movement. It is worth noting that this is even a big plus, since due to the small overall dimensions the maneuverability of the excavator has been significantly improved. These changes made it possible to use the machine in cramped urban environments, which significantly affected functionality and practicality.

In terms of technical characteristics, the modification is no different from the basic excavator. The car just received an updated design. The basic excavator was intended exclusively for work in households and rural households, when the modified version contributed to expanding the range of work performed, as it was aimed at mass consumers and public organizations.

In addition to the listed changes, there is also a modern hydraulic system designed for high load capacity. The working equipment began to make any movements more smoothly and accurately, as a special system called “Hidrocontrol” was introduced. Also, in the new excavator it has become possible to combine various actions, and standard mounted units have become more protected from external damage associated with operator errors during operation.

The key feature of this model compared to the basic one is the axis with the possibility of its longitudinal displacement. This allows you to perform the necessary operations quite close to fences, walls of various structures and other similar enclosing objects. The maximum digging depth was also increased to 4340 millimeters, due to the use of a longer handle and boom. If the EO-2626 is built on the basis of the MTZ-82 tractor, then the MTZ-92P tractor served as the basis for the modified version.

Excavator EO-2626: technical characteristics

The EO-2626 excavator is one of the oldest representatives of wheeled tractor equipment. It was created on the basis of the MTZ-82, which was the main reason for its popularity and durability. In addition to ease of repair and maintenance, the machine offers the user off-road capability and an impressively low price.

Among the advantages of the EO-2626 backhoe loader are:

low cost of work. Along with productivity, the machine offers cost reduction, which allows it to be ranked among the best Soviet technology;
high maintainability. Firstly, spare parts for EO-2626 are very inexpensive. Secondly, the machine is designed in such a way that most of the breakdowns can be repaired on the spot, without any special skills. Thirdly, the average excavator downtime due to breakdown is 30 minutes. This result is achieved by the cheap price of spare parts and their availability;
all the advantages of the MTZ-82 tractor. And these are endurance, strength, durability and maneuverability. EO-2626 can work in any conditions, be it heat or high humidity, for a long time. Not a single Western analogue can offer a continuous cycle of operation, regardless of climatic conditions;
the ability to connect equipment through the hydraulic distributor of the base chassis or the excavator itself. This increases the accuracy of work, which in normal cases requires the use of expensive electronic equipment and a video surveillance system. Needless to say, the simplest design is the most reliable.
large selection of attachments. The consumer can choose from standard equipment, a hydraulic hammer, a bulldozer blade and others.

Engine, transmission, hydraulic system

The EO-2626 backhoe loader is equipped with a factory engine, model D-243. This is a four-stroke diesel engine used on many MTZ models. The power of the power unit is 82 hp. or 60 kW. The engine runs on four cylinders and is cooled by a liquid system.

The manual transmission provides 17 forward and 4 reverse speeds. The MTZ-82.1 “Belarus” wheeled tractor was used as the base chassis. Wheel formula 4x4. The maximum speed of the car is 32 km/h forward and 25 km/h back. The excavator hydraulic system operates with a maximum pressure of 16 MPa. With all the listed indicators, EO-2626 has an average fuel consumption of 5 l/l during operation and 10 l/h while driving at maximum speed.

Performance characteristics

The EO-2626 wheeled excavator, produced by the Pinsk Small Mechanization Plant, offers the user the following indicators:

nominal load capacity - 800 kg;
surmountable inclination angle on a dry surface - 13 degrees;
type of standard excavator bucket - backhoe;
excavator bucket volume (nominal) - 0.25 m3;
cutting edge width (excavator bucket) - 550 mm;
volume of the basic transfer bucket - 0.63 m3;
maximum unloading height (transfer bucket) - 2600 mm;
cutting edge width (transfer bucket) - 2000 mm;
digging depth - 4100 mm;
digging radius (maximum) - 5200 mm;
unloading height with excavator bucket (maximum) - 3500 mm.

The excavator's work cycle is a maximum of 16 seconds. In addition to the basic attachment kit, the machine can be equipped with:

narrow bucket (volume - 1 m3, width - 330 mm);
hydraulic hammer (impact energy - 500 J, frequency - 720 blows/min).

dimensions

Length - 7900 mm;
Width - 2400 mm;
Cabin height - 3900 mm;
Weight - 7 tons.

Reviews

Most clients are satisfied with their choice of special equipment. By purchasing EO 2626, they receive a reliable assistant that can cope with almost any difficulty.

When constructing buildings, the endurance of equipment plays an important role. Not every unit on a construction site can boast of such an indicator. With a reasonable approach, the excavator shows truly high results of its work. Its ability to cope with both loose and rocky material does not go unnoticed by the owners during operation.

Consumers also appreciated the ability of the unit to operate both from the hydraulic distributor of the base chassis and from the hydraulic excavator distributor. In addition, the presence of replaceable equipment did not go unnoticed; it allows you to perform various works during the construction of roads and buildings. Replaceable equipment makes it possible to use an excavator not only during construction work, but also for agricultural work.

Among the positive reviews there are also negative ones. In most cases, young people who are accustomed to an increased level of comfort in all areas of our lives complain about the model. They lack the on-board computer in the EO 2626 unit, which is why they have to be smart while working. The younger generation is accustomed to the fact that in our lives most operations are performed by special equipment, and there is no need to think, you just need to find the right button and press it. But despite all the positive aspects, the EO 2626 is not capable of doing the job on its own; you need to work on it.

Another point is non-compliance with the rules for operation and maintenance of the device, which results in rupture of hydraulic hoses. If you do not violate deadlines and conscientiously carry out preventive inspection of equipment, then such trouble can be avoided. The unit is easy to operate and durable, and taking into account its low cost (the price for EO 2626 is in the range of 1.2-1.5 million rubles) and ease of maintenance, it has no equal. With the right approach, the equipment performs absolutely any task assigned to it and easily replaces almost any road construction equipment.