Among the huge number of loader models currently produced by Chinese manufacturers, one cannot help but notice the XCMG ZL30G front loader. This model is very popular among many global consumers because it has high operational and technical parameters. In addition, the ZL30G loader has a fairly attractive design and the ability to withstand intense operating loads for a long time.
Advantages of the model
The main advantage of the zl30g model is its high performance. But the advantages of this unit can be continued with the following list:
- The small turning radius of the flexible, centrally articulated frame allows maneuvering in confined spaces.
- The machine's high maneuverability, which is ensured by large tires with low pressure and a swinging rear axle, allows work to be done in the most unfavorable conditions, despite uneven ground, snowdrifts and other obstacles.
- The hydrodynamic and mechanical transmission makes operation smooth and control as comfortable as possible for the operator.
- Reliable brakes mean safe operation of the unit.
- Cab visibility gives the operator complete control over the maneuvers.
XCMG ZL30G
The ZL30G quarry front loader is cutting-edge equipment that is often very necessary at production facilities and in industrial environments. Its presence significantly speeds up the time required for handling, loading and unloading bulk materials and effectively solving construction and preparatory work using an excavator or scraper. He is able to perform any work on stripping and transferring soil or any bulk materials. It should be noted that the XCMG quarry front loader will perform this work much faster and with better quality than any highly specialized analogues. The uniqueness of XCMG's construction equipment lies in the fact that any produced model can be supplemented with the necessary special equipment. This fully applies to the ZL30G mining front loader. In particular, it is possible to install jaw grips for working with timber, bulldozer blades and even blades for removing snow and ice on this type of excavator. Side unloading buckets are used along with buckets of various volumes and ballet forks. The range of possibilities for using additional equipment allows you to significantly increase the amount of work performed by this loader.
It is equipped with a modified, reinforced frame and a very comfortable cabin with all the attendant modern requirements for the driver’s workplace. The workflow can be controlled using a joystick or classic levers (handles). The standard equipment includes a bucket, cabin heating systems, and an engine pre-heating system. It is equipped with air conditioning and radio equipment, as well as the previously listed additional equipment. As standard, this model is equipped with a powerful, economical, modern Perkins engine.
The XCMG RUSSIA company offers a ZL30G quarry front loader, which you can buy from us at an affordable price with high-quality service. We guarantee the reliability of XCMG construction equipment certified according to international standards. A wide network of service centers guarantees maximum efficiency in the use of technical equipment purchased from us with virtually uninterrupted operation. For this purpose, mobile repair teams have been created and operate, ready at any time to carry out diagnostics and maintenance work on the loaders purchased from us.
Loader Specifications
| Engine | |
| Engine Description: | 4-stroke diesel with water cooling and direct injection |
| Speed rpm: | 2300 |
| Rated motor power kW: | 85 |
| Maximum torque: | 405 N*m/1400-1600 |
| Fuel consumption at rated power g-kWh: | |
| Oil consumption g-kWh: | |
| Launch method: | electric start |
| Engine weight kg: | 580-620 |
| Size | |
| Bucket width: | 2460 |
| Wheelbase mm: | 2700 |
| Track mm: | 1850 |
| Height mm: | 3170 |
| Min. ground clearance: | 365 |
| Overall length (bucket on ground): | 6830 |
| Overall width (at wheels): | 2300 |
| Transmission | |
| Operating pressure in the transmission system: | 1.1-1.5 mPa (1078 ~ 1471 kPa) |
| Oil pump model ml: | 32 |
| Model: | BS428 |
| Type: | hydromechanical, fixed power take-off shaft, transmission cage, straight teeth are always in mesh |
| Number of gears: | 4 forward 2 back |
| Gear ratio: | 1) 3,82/ 3,05 2) 2,08/ 0,87 3) 1,09 4) 0,59 |
| Containers l. | |
| Fuel tank l.: | 145 |
| Engine oil l.: | 20 |
| Transmission oil : | 32 |
| Hydraulic tank: | 125 |
| Bridges l.: | 25 |
| Maximum breakout force | |
| Lift kN: | — 51 |
| Maximum digging depth mm: | — 50 |
| Bucket lifting time sec.: | |
| Full cycle sec.: | |
| Minimum turning radius mm: | — 4800 |
| Frame rotation angle °: | — 40 ± 1 |
| Rear frame swing angle °: | -±12 |
| Tilting kN: | -110 |
| Front and rear axles | |
| Model: | Huzhou-Meritor ZL30CA |
| Main gear type: | spiral bevel gear with single-stage transmission |
| Gear ratio: | 5.286 |
| Wheel transmission type: | single stage planetary gearbox |
| Front axle : | stationary relative to the frame |
| Rear axle: | swing type |
| Tires: | 17.5-25 |
| Tire pressure front-rear kPa.: | 3 / rear 294 |
| Steering | |
| Multi-way valve: | DF25 HF |
| Lifting cylinder mm: | 2nd 110 x 769 |
| Rotary cylinder mm: | 1st 150 x 525 |
| Hydraulic pump: | CBG2100 |
| Hydraulic pump volume ml.: | 100 |
| System pressure mPa: | 6 |
| Specification | |
| Rated load kg. : | 3000 |
| Bucket volume m3.: | 1.7 |
| Bucket volume “with top” m3. : | 2.1 |
| Working weight kg: | 10500 |
| Speed (km/h) - forward - reverse gear: | I. 7.8 / 9.5 II. 13 / 28 III. 25 IV. 35 |
| Maximum pulling force kN: | — 90 |
| Maximum surmountable slope °: | — 28 |
| Maximum unloading angle °: | — 45 |
| Unloading height mm: | 2800 |
| Bucket edge reach mm: | -1030 |
| Unloading angle in any position °: | > 45 |
| Brake system | |
| Foot brake: | air disc 4 wheels |
| Pressure kPa.: | 784 — 833 |
| Hand brake: | belt controlled by air valve |
| Transmission system | |
| Torque Converter (Model): | YJ315X |
| Type: | single-stage 3-element |
| Cyclic diameter mm: | 315 |
| Conversion factor: | K = 3.2 |
| Cooling method: | oil circulation under pressure |
| Bucket return angle | |
| Lowest position °: | — 45 |
| Transport position °: | — 48,5 |
| Highest position °: | — 56 |
Features and some parameters of the XCMG ZL30G front loader
- The development of the front loader was aimed specifically at lifting various types of cargo to significant heights.
- Characterized by high load capacity and breaking force with high productivity and short cycle times. Using this technique, it is possible to perform fairly large volumes of various works over a short period of time.
- This is a kind of budget option and an analogue of Komatsu products that are produced in Japan. With similar technical indicators to Japanese loading equipment, XCMG ZL30G has a very attractive price for consumers: its cost is 2 times less. This fact allows companies with a limited budget to use advanced loading technology.
- The XCMG ZL30G loader is quite compact with a comfortable cabin and a modern exterior design. These parameters are at the level of European models of front loaders.
- It is equipped with a diesel power plant and a continuously variable hydromechanical transmission.
- Featuring functionality and high performance, the loader is very reliable in use and is able to carry out the task even in difficult weather conditions. It is suitable for various climatic zones, as it is quite resistant to hot climates and harsh winter conditions.
- To perform loading operations, a Z-shaped arrangement of equipment and a powerful hydromechanical transmission are used, which ensures good driving performance on any road. With a fixed front axle, the rear axle has freedom of swing together with the frame within thirty-five degrees.
- Due to the articulation in the center of the frame, the front loader has a small turning radius.
- In addition to the main equipment, the machine has additional tools (log grabber, etc.), which expands the range of work performed and increases the speed of their completion.
Successful combination of technical indicators and operational parameters
It is no secret that with the use of automatic construction equipment, such as the XCMG ZL30G front loader, production forces and time can be significantly saved. This opportunity is provided by the speed and large volumes of lifting, excavation and other types of work where using outdated equipment is simply ineffective. This unit will help reduce the time for operations performed with bulk cargo; it can be successfully used as a replacement for a whole range of highly targeted equipment. This refers to specialized machines such as a scraper or excavator, and various types of bulldozers. It is worth noting that Chinese equipment is more likely to cope with the task even better, be it operations with crushed stone, soil or sand.
The XCMG ZL30G loader is very compact, with a well-equipped operator station. The unit is used for laying or repairing roads. Often such machines are purchased for mining operations on an industrial scale. Also, specialized Chinese-made equipment is indispensable in public utilities, where some operations such as cleaning up landfills, laying heating mains, or simply carrying out certain types of repair work cannot be done without it. Many people prefer this lifting vehicle in agricultural cooperatives or farms. In this case, the unit is purchased as an alternative to a number of mechanisms in demand in agricultural work. The maneuverability of the machine facilitates its use in the field and in the greenhouse, warehouse or farm.
In addition to the basic properties and characteristics, many potential buyers are interested in the price of the XCMG ZL30G loader. This question cannot be answered unequivocally, since there are many factors on which the cost of a Chinese specialized vehicle depends. For example, a new unit or a used one. If the second option, then what is its degree of wear and general technical condition. But we can say that a new model of equipment from the manufacturer will have a price of one million four hundred thousand rubles. Although there are options indicating a lower price - one million and three hundred thousand rubles. Used equipment costs much less - from half a million rubles. But in this case, the unit needs a thorough inspection upon purchase, and even then, it is unknown how the machine will behave directly in operation. A new loader, which is still preferable to purchase, is covered by the manufacturer’s warranty.
Technical characteristics of the XCMG ZL30G loader
The technical characteristics of the XCMG ZL30G include a lot of data about this powerful and productive machine, which weighs ten and a half thousand kilograms. The load-moving wheeled device can reach speeds of eight, thirteen, twenty-five and thirty-five kilometers per hour. This list of maximum speed values is not accidental; its values depend on the type of operation being performed, the degree of load on the machine and the work task assigned to it. This brand of equipment is capable of lifting a load in just six seconds, and its operating cycle time is ten seconds. It is worth noting that the unloading height reaches a value of two meters and eighty centimeters, and the ladle outreach distance is just over a meter. At the same time, the bucket is pulled out with a force of 11 tons.
The XCMG ZL30G front-end loader is designed for a lifting capacity of three thousand kilograms, and its bucket capacity is one point seven cubic meters. The turning radius of the device is four meters and eighty centimeters, the width of the bucket is about two and a half meters. The dimensions of the lifting device deserve special attention. Its length reaches almost seven meters, its width is approximately two and a half meters, and its height is over three meters. Thus, you can already get an idea of how powerful and solid this specialized machine is, and how productively this device with a rather bulky design can be used.
The XCMG ZL30G front loader stands out among a whole range of specialized equipment produced by Chinese manufacturers. Thanks to its excellent technical characteristics and good operating parameters, the unit is popular and used in many countries around the world. On the positive side, the equipment also has a long service life and attractive design. The purpose of a lifting device, as can be judged from the definition, is to lift a wide variety of loads to a height allowed by the structure. Good lifting capacity, coupled with excellent breakout force and short cycle times, results in outstanding machine performance. The demand is explained precisely by the high level of productivity, when a large volume of work can be completed in a fairly short period of time.
Specifications
- Equipment model – ZL30G.
- Total weight – 10500 kg.
- Load capacity – 3000 kg.
- The power plant model is YC6105G-1640H.
- The power of the power plant is 115 l/s.
- Torque on the shaft – 2300 N.m/rpm.
- Chassis wheelbase – 2700 mm.
- Turning radius (minimum) – 4800 mm.
- The maximum angle of climb that can be overcome is 28°.
- The volume of the main bucket is 1700 dm3.
You can buy a front loader XCMG ZL30G on dmir.ru at a price of 880,000 rubles.
