Chainsaw Stihl MS 211 - characteristics, overview of advantages and disadvantages.

Specifications and Features

The Stihl MS 211 14-inch chainsaw is powered by a two-stroke engine using 2-MIX technology, which reduces fuel consumption by 20% and reduces harmful emissions by 70% compared to conventional engines.

At maximum speed, the chainsaw produces 2.3 liters of power. With. The weight of this model is only 4.3 kg. If you compare the Shtil 211 with the 180th model, you can immediately see that the 211th is a little more powerful and at the same time weighs almost the same. For example, Shtil 180 S-BE weighs 4.2 kg. This means that with prolonged use, productivity will be higher, and the operator will be as tired as if using a Shtil 180 chainsaw.

Below is a comparative table of characteristics, after analyzing which we can conclude that the 211 is more powerful, has a larger oil tank volume and has less impact on the operator’s hands, since its vibration level is almost two times lower.

Already in the standard configuration, the chainsaw has some functional features that make it a little easier to use. For example this:

• air filter with pre-cleaning. The air pre-cleaning system operates on the principle of a centrifuge, ejecting contaminants before they enter the air filter, which significantly increases the interval for its maintenance and replacement;
• preheating the carburetor, relevant for northern regions, where due to very low temperatures, conventional chainsaws may simply not start;
• QuickStop brake for instantly stopping the chain, will protect the operator in the event of an unexpected rebound of the saw in his direction, which happens quite often;
• four-channel STIHL technology creates turbulence in the fuel mixture, thereby promoting its better combustion;
• The fuel tank cap, which can be opened without any tools, adds convenience when using the Stihl MS 211 chainsaw.
• anti-vibration system significantly reduces vibration levels, allowing people with chronic hand diseases to use the saw;
• Ematic system. Reliable and economical supply of lubricant to the chainsaw bar;
• compensator, makes it possible to work even with a very dirty air filter;
• side chain tensioner. Allows you to conveniently and safely monitor the condition of the cutting set.

Features of the C-BE modification

Like all models of Stihl chainsaws, the 211th has an improved modification, 211 with the prefix (c-be). What does this prefix mean? (C) – the tool is equipped with the ErgoStart easy-start function.

ErgoStart

This is a special spring installed in the starter housing, which works on the principle of a force generator. During the starting process, the operator smoothly pulls the starting cable, which compresses the spring to a certain point, after which it breaks and turns the crankshaft, starting the engine.

The advantages of using the system are obvious, because during the startup process the operator practically does not feel the compression, which is quite high on this model.

Chain tension system

The prefix (B) means that the chainsaw has a system that allows you to install the bar and tension the chain without using additional tools. On the side cover of the saw equipped with this system there is a special adjustment knob, as well as a mechanism with which the cover can be easily unscrewed without a key.

The design does not have fastening nuts, which means they cannot be lost, it is very convenient and practical.

Grease pump

Unlike a conventional tool, a chainsaw with the prefix (E) has an improved design of the oil supply pump to the saw chain. This pump is adjustable. This function is useful when working with an extended bar or when working with dry wood.

This function allows you to increase the service life of the saw set, which ultimately reduces the cost of ownership of the tool.

Choice

Manufacturers of chainsaws recommend using a saw bar of a certain size and technical parameters for each specific model. To make the right choice, you should take these parameters into account and then there will be no problems.

Main settings

When choosing, consider the main five parameters:

1. Length.
2. Width of the guide groove.
3. Tire sprocket pitch.
4. The number of chain links intended for it.
5. The type of shank and model of chainsaws on which it can be installed.

Depending on the power of the chainsaw, it is possible to install headsets of different lengths on it, which allows you to adjust the performance and load on the saw. Manufacturers can indicate the length in both centimeters and inches and, as a rule, this is not the entire length of the tire, but only a characteristic of the length of its working part. Choosing the right tire for a chainsaw should begin with studying the instructions for the chainsaw and finding out the permissible length for a particular model. For example, for the Shtil MS 180 chainsaw, the recommended lengths are 14 or 15 inches.

The width of the guide groove, as well as the pitch of the sprocket on the bar, must correspond to the same parameters of the saw chain, otherwise installation of the chain on the bar will not be possible. The groove width for household models of chainsaws is 1.1 and 1.3 mm for professional models 1.5. The most common sprocket pitch sizes are 0.325 and 3/8 inches.

Depending on the type of shank, the bar can only be installed on certain chainsaws. This is because the chain lubrication hole on bars designed for certain brands of chainsaws may be located in different places. For example, a tire from a Stihl chainsaw cannot be installed on Husqvarna and vice versa, be sure to take this into account when choosing.

A high-quality video description of the selection process can be viewed below. In this video, a specialist from the gas-powered tools sales department talks about the main characteristics of the saw set, its types and sizes.

Carburetor adjustment: adjust it yourself or take it to a service center

The carburetor is supplied from stock with standard adjustment. In cases where it is necessary to adjust the speed, it is recommended to contact a service center. Since this will require certain skills and some tools and instruments (tachometer). If you have all this, you can start adjusting the carburetor yourself.

You need to adjust the idle speed settings according to the following scheme:

• the chainsaw motor is turned off;
• bolts L and H are turned to their extreme position, all the way;
• then start the engine;
• with the gas squeezed, adjust screw H until the speed rises to the maximum - the readings are checked on the tachometer with the data in the technical passport for this model of saw;
• using the LA jet, you need to make the chain start to rotate, then turn it counterclockwise a quarter of a turn

After completing the described manipulations, you can continue working.

If after reading you still have questions and need additional information, we recommend our article-guide for adjusting the carburetor on a Stihl MS 180 chainsaw. Despite the fact that the article is for the 180 model, it is quite suitable for setting up the 210 model, too. .To. the design and operating principle are identical.

Reviews from Stihl 211 owners

Owners of the 211th chainsaw leave good reviews about this model. Here is an example of one of them.

Alexei. 39 years. Velizh. Smolensk region.

I work as a builder, we make logs of bathhouses, houses and other buildings from round wood. I can’t do without a saw, although we don’t have the same load on it as those who cut down wood in the plots. Previously, I had a Shtil 180 chainsaw, I was happy with almost everything, except that I was tired of the vibration. The opportunity arose to sell my old chainsaw and buy a new one, I happily purchased the Shtil MS 211 C-BE and this is what I want to say: the Shtil 211 chainsaw is just super, it’s nice to hold in your hands. Easy to start, almost no vibration. I forgot what it was like to carry a wrench with me to tighten the chain.

As for repairs, during the entire period of operation, which is already more than two years, I contacted the service center only once, and that was because after break-in it is necessary to adjust the maximum speed.

In general, the chainsaw is reliable, convenient and worth the money. By the way, I bought it at a time when there was a discount on it, as a result of which it cost me not much more than the Shtil 180 cost at that time. I recommend the MS 211 to everyone who wants to have a reliable and modern chainsaw for the home.

Is a chainsaw worth the money?

The cost of the Stihl MS 880 varies and averages about 80,000 rubles. To the question: “Is it worth the money?” - as is usually the case, there will be many ambiguous answers. However, after looking at a number of reviews from real customers (positive reviews significantly outweigh negative ones), we can conclude that the Shtil MS 880 is indeed a good professional chainsaw. In addition, taking into account all the features and technical characteristics, as well as the fact that this is one of the best chainsaws among various world brands, we can still say that the fairly high cost of this tool is justified.

Chainsaw Shtil MS 211 tire 35 cm

Convenient petrol chain saw STIHL MS 211 with a power of 2.3 hp, weight 4.6 kg, working volume 35.2 cm3. Purpose: for private use.

— Chain for Stihl MS 211 can be ordered here.

— The chain with pobedit teeth is here.

— Tire for Shtil MS 211 order here.

— Delivery within the Ring Road is free. More details about delivery here.

— A complete list of spare parts for the Shtil 211 chainsaw with article numbers can be found here.

When purchasing equipment from an official dealer, you can take advantage of free service twice a year, regardless of the age of the unit! Details here.

Malfunctions and repairs

The carburetor of the Stihl 180 chainsaw requires both initial and periodic adjustment. You can find out about its need by the following signs:

1. Problems with the engine, for example, it does not start or stalls immediately after starting. The most common cause is the use of a low-quality fuel mixture.
2. Fuel consumption and increased emissions. Exhaust gases increase due to incomplete combustion of fuel. Most often, this problem can arise due to oversaturation with fuel.

Other damage may also occur, for example, blockage due to damage to the air filter or the formation of scale. The reasons may be due to the fact that during prolonged periods of inactivity, gasoline remains in the fuel tank. This is due to the fact that the fuel runs out, which damages the device.

Regardless of the reason, carburetor repair will be required, which most often comes down to adjustment. The method for performing this procedure depends on the chainsaw model, but you can follow the general principles.

How to remove a carburetor from a chainsaw

Before adjusting, you need to remove it from the Shtil chainsaw. To do this you need:

1. Turn the lock to the left to remove the cover.
2. Remove the filter by unscrewing the two nuts that hold it in place. To make work easier, it is recommended to use special screwdrivers with suitable attachments.
3. Remove all rods, including the carburetor lever.
4. Remove the carburetor and then disconnect the fuel hose.

It is recommended to remember the location of the parts so that you can then put the carburetor in place without any extra fasteners remaining or distortions and cracks not forming.

How to clean

If the chainsaw stalls at idle, it is necessary to disassemble the part and clean it. This primarily concerns cleaning the additional filter. This part is a mesh. To get to it you need:

Remove the largest cover. Remove the membrane located under the cover. Clean the mesh that is located in the recess

This must be done with extreme caution, as the mesh may fall out. Use copper wire for cleaning. Additionally, you need to rinse and blow out all channels

The last procedure is necessary if gasoline does not flow into the carburetor

Additionally, you need to rinse and blow out all channels. The last procedure is necessary if gasoline does not flow into the carburetor.

How to setup

The carburetor adjustment of the Shtil 180 chainsaw is carried out in order to improve performance and fuel economy.

To adjust it yourself you need:

1. Clean the fuel system, including the tank, from any remaining mixture of gasoline and oil. Blow out the air duct and filters.
2. The chainsaw carburetor is adjusted using bolts H, L and S. Bolt H controls the jet and ensures maximum speed. Bolt L performs the same function, but provides minimum speed. Screw S is responsible for the accuracy of idle speed. This procedure must be performed with the engine turned off.
3. You need to adjust the carburetor on a chainsaw by setting the corresponding rotation angles of the first two bolts. You can set the base values ​​as follows. Turn the first two bolts slowly in a clockwise direction, and after stopping, turn back two turns.
4. Turn on the engine and adjust the ignition on the Stihl chainsaw and its carburetor completely. To do this, you need to find the highest idle speed by turning the bolt L in different directions. Once this maximum has been found, the bolt must be returned a quarter of the way. If the chain starts to move, the engine must be stopped.
5. Carry out a technical check. In particular, you need to determine the maximum number of revolutions, check the acceleration and stability of the engine at idle, as well as the compliance of these parameters with the basic values ​​​​in the instructions. The quality of the mixture to be tested must be of the highest quality.

Features of practical application

The Shtil 211 saw is characterized by the highest performance for its power class, cost-effectiveness of maintenance, and reliability of working units and component systems.

The scope of its application extends to a wide range of works related to the procurement of firewood, cutting construction and industrial wood, and the formation of crowns of ornamental and fruit trees.

The design of this tool is based on the concept of maximum comfort and safety for highly complex work.

This is facilitated by:

• ergonomic product design;
• special configuration of handles;
• excellent balancing;
• effective operation of the emergency brake.

Device

The Stihl MS 180 chainsaw has a fairly simple design, intended for use by users without specific experience. The saw carburetor is designed in such a way that it is not possible to adjust it to the maximum number of engine speeds. The only available adjustment screw is responsible for stable idle operation.

The saw consists of the following structural elements:

• engine;
• starter;
• flywheel, also known as cooling fan;
• ignition module;
• clutch;
• saw chain brake mechanism;
• carburetor;
• air filter with replaceable filter element;
• oil and fuel tanks;
• muffler;
• side cover with chain tension adjustment mechanism;
• control handle and saw handle.

Let's look at the structure of a chainsaw and how the main elements work in more detail.

To start the Stihl chainsaw, you need to pull the starter cord.

The starter transmits force through the flywheel to the crankshaft and drives the piston. At this moment, under the influence of an air pulse from the engine crankcase, transmitted through special channels to the carburetor, the fuel pump begins supplying gasoline and oil to the carburetor, where a fuel-air mixture is formed and supplied under the piston.

At the same time, when the piston is at TDC (top dead center), an electrical discharge is supplied from the ignition coil to the spark plug, which ignites the fuel mixture under the piston in the cylinder and forces the piston to move down, thereby making a power stroke.

After a successful start-up, the saw cyclically repeats all work processes and works stably.

Let's consider how the force from the engine is transmitted to the drive sprocket and causes it to rotate the saw chain. For this purpose, a gasoline saw has a centrifugal clutch, which is installed inside the drive sprocket and is rigidly fixed to the engine crankshaft.

As the engine speed increases, the clutch opens and, resting against the sprocket body, transfers force from the engine crankshaft to it, forcing it to rotate the chain mechanism.

The next element is the saw chain brake. The brake device is quite simple and consists of a control lever and a metal plate that wraps around the drive sprocket and is installed in the saw body. In the working position, the chain brake plate securely holds the drum sprocket.

Spark plug

The Shtil MC 180 chainsaw uses an anti-interference spark plug with a gap between the electrodes of 0.5 mm. 2 options are supplied as standard from the factory:

• Bosch WSR 6F
• NGK BPMR 7A

There are no differences in using a candle of a certain brand.

Chainsaw Shtil MS 211 tire 35 cm

Convenient petrol chain saw STIHL MS 211 with a power of 2.3 hp, weight 4.6 kg, working volume 35.2 cm3. Purpose: for private use.

— Chain for Stihl MS 211 can be ordered here.

— The chain with pobedit teeth is here.

— Tire for Shtil MS 211 order here.

— Delivery within the Ring Road is free. More details about delivery here.

— A complete list of spare parts for the Shtil 211 chainsaw with article numbers can be found here.

When purchasing equipment from an official dealer, you can take advantage of free service twice a year, regardless of the age of the unit! Details here.

Chainsaw Stihl ms-660. Technical characteristics and features of use

The Stihl ms-660 chainsaw is produced by the famous brand from Germany “Stil”. Stihl chainsaws are the most sold saws in the world, this equipment is characterized by high reliability and performance, and the saws are considered the quietest in existence. The history of the development of the Stihl company began in 1921, when Andreas Stihl decided to create his own company, which was engaged in the production of steam boilers and washing machines. The first Shtil chainsaw appeared in 1929, its power was 6 hp. s., and weight - 48 kg. This unit was serviced by two operators.

Gradually, chain saws were improved, their weight decreased, their functionality increased, new elements appeared: cutting-scraper teeth on the saw chain, a chain lubrication system, a centrifugal clutch, a diaphragm carburetor, handles with an anti-vibration system and a chain brake.

Shtil brand products are present in the markets of more than 160 countries around the world and are very popular among the population. The company's representative offices are spread over 5 continents, with production sites located in Germany and the USA.

The more popular the equipment, the greater the demand for it, the more often you can find Chinese counterfeits on the market.

In order to promptly recognize a product from China, we recommend watching video reviews that compare two identical models and show the characteristic differences

And, of course, you should pay attention to the price of the chain saw; it is in the range of 41-71 thousand rubles. Those who like to save money risk running into a Chinese counterfeit, which will cost an order of magnitude cheaper.

We invite you to familiarize yourself with the obvious signs of the Chinese origin of the saw. So, the Chinese chainsaw “Calm” ms 660:

lack of a proprietary instruction manual, different appearance of the instructions; covering the body with duller paint; different shape of the starter housing; The air filter screw of the Chinese is placed in the upper part of the saw, instead of the rear position of the original; the covers of the oil and fuel tanks have a simple convex shape, while the original covers are made to fit the screwdriver included with the tool; the spark plug does not have the characteristic Stihl inscription; The brake lever mount is one-sided.

Advantages of the Stihl 211 chain saw

Advantages of the model:

• compact dimensions;
• ease;
• performance;
• high quality;
• the ability to use various circuits;
• automatic chain lubrication system;
• vibration protection;
• increased security;
• easy start system;
• side chain tensioner;
• universal filter;
• ease of operation, etc.

According to reviews, this chainsaw has only one drawback - the high price!

How to disassemble a Stihl 211 chainsaw

In some cases, for example, to troubleshoot engine problems, the Shtil 211 must be disassembled. For disassembly you will need the following tools:

• combination key Shtil;
• a piston stopper or a cord from the starter with knots tied to it;
• soft metal drift;
• head for nuts 10 mm;
• Torx hex set.

You can avoid breaking body parts by following a certain algorithm for carrying out work. The first thing you need to start with is cleaning the saw from dirt, as it greatly complicates repairs. Next, disassembling the Shtil 211 chainsaw is carried out in the following sequence:

1. Brake cover.
2. Tire and chain.
3. Leading sprocket. In order to remove it, you need to remove the stopper and pull the sprocket towards you.
4. Top cover (very easy to remove thanks to special fastening).
5. Starter. It is held in place by several screws that are unscrewed with a Torx wrench of the appropriate size.
6. Spark plug.
7. Flywheel and clutch.
8. Front handle, to remove it you need to unscrew the shock absorbers, and not press them out, as on the 180th saw.
9. Muffler (if necessary, the muffler can be removed first).
10. Carburetor.
11. Engine (fixed to the body with four screws).

The flywheel and clutch can only be untwisted when the crankshaft is locked. You can block the piston stroke through the spark plug hole by installing a stopper or a cord with knots. The clutch has left-hand threads and rotates clockwise.

Never try to lock the crankshaft by inserting a screwdriver or wrench between the ribs. The force required to spin the flywheel is too high; the blades are fragile and in 100 percent of cases cannot withstand such a load.

This is interesting. The carburetor of the 211 model is slightly different from the carburetor of the 180 model. It has a different valve arrangement and body shape, but the main chamber and fuel pump are designed similarly.

The disassembly algorithm for the Shtil MC 211 is not much different from how the Shtil 180 is disassembled. For this reason, we suggest watching a video that shows in as much detail as possible in what order it is necessary to disassemble the chainsaw. The video description consists of three parts.

Common breakdowns of the Stihl MS 211 chainsaw

Now let’s look at the main faults of Stihl chainsaws, focusing on the most common ones.

The 211th Stil has a two-stroke engine, so it has all the “sores” of this type of engine, namely:

• scuffed CPG;
• air leak into the crankcase through the gasket;
• wear and air leaks through the seals;
• blockages in the carburetor and fuel system;
• loss of power;
• lack of spark due to a malfunction of the magneto or electronic ignition coil.

Of the entire list, most often Shtil owners have to deal with carburetor problems and air leaks through the seals.

How to troubleshoot and replace the seals is shown in the video. Unfortunately, the video is in English, but the progress of the work is shown in as much detail and is clear even without words.

Problems with fuel quality are eliminated in the same way as other Shtil chainsaw carburetors are repaired. On our website you can find an article about how to diagnose and repair the fuel system and carburetors on Shtil chainsaws.

Adjusting the chainsaw carburetor

Most chainsaws have three adjustment screws on the carburetor. In order about each:

• T - Idle screw. The idle screw is responsible for the position of the throttle valve when the throttle handle is completely released. If the throttle valve is not open enough, the engine will stall when the handle is released because the throttle valve will cut off the supply of the fuel mixture. If the throttle valve is opened more than it should be, then the chain will rotate, which is strictly prohibited by safety precautions when working with a chainsaw.
• L-Low speed adjustment screw. This screw regulates the amount of fuel in the fuel mixture when the chainsaw is idling. If the amount of fuel is large, the engine will stall under load; if there is not enough fuel, the result will be engine overheating, scuffing, and so on...
• H-High speed adjustment screw. Responsible for the amount of fuel in the mixture when the chainsaw is operating. If this adjustment is set to a larger amount of fuel, then the engine runs “unacceptably” and smokes, and if it is set to a smaller amount, then we get too high speeds and overheating.

Carburetor adjustment step by step

1. Check the condition of the air filter. We remove it and either clean it or change it. If the air filter is clogged with dirt and sawdust, the chainsaw will not operate normally.
2. We check the condition of the muffler. It must be clean and unclogged. Read more about cleaning the muffler HERE.
3. Before you start adjusting the carburetor, you should fill the fuel tank at least halfway.
4. If the chainsaw is able to start, then you should let it run for a few minutes to warm up. If the adjustment is carried out “cold”, then the mixture will be over-rich after warming up.
5. You need to start adjusting by adjusting the idle speed - screw L. It is highly advisable to have a tachometer, then we focus on 2700 rpm. If not, then we need to find the highest idle speed. In this case, the chain should not rotate. If it still spins (the chain, of course, and not the Earth), then we stop it by rotating screw T. The sound of the chainsaw should be the same as when listening to the file below. https://benzopilatut.ru/wp-content/uploads/2016/01/Chainsaw-at-idling.wav
6. We regulate high revolutions - screw H. If we rotate it clockwise, the revolutions will increase, and if counterclockwise, they will fall. We tighten it until failures appear in the ignition. After that, turn it out about one-fifth of a turn. The sound of a chainsaw when operating at maximum speed should be like this when listening to the file below. https://benzopilatut.ru/wp-content/uploads/2016/01/Chainsaw-maximum-speed.wav
7. Let's check how the chainsaw is gaining momentum. She should type them smoothly and quickly. If the speed increases slowly, then turn out screw L slightly.

Remember that the optimal carburetor adjustment is:

Solving repair and restoration problems

There is no shortage of spare parts and consumables for Shtil brand chainsaws. High maintainability and convenient access to the tool systems allow its owners to eliminate operational failures and malfunctions with their own hands. The key to the popularity of this brand’s products is the high quality of consumables and components.

If the engine has lost power, the reason is most likely a clogged air cleaner, oil is leaking - you should make sure that the oil reservoir and oil line are tight. Elimination of such faults is carried out with a minimum set of repair skills.

Which chainsaw is better Shtil or Husqvarna - what to choose?

Before buying a chainsaw, the question certainly arises: which chainsaw is better Shtil or Husqvarna?

It is impossible to answer unequivocally, because everyone chooses the instrument that they like. It is for this reason that in this article we will look at the main pros and cons of Stihl and Husqvarna instruments, knowing which it will be much easier to make a choice when purchasing.

How are chainsaws different?

Stihl and Husqvarna are without a doubt the leaders in the production and sale of gasoline-powered chainsaws. Thanks to serious competition, every year each company develops many new technical solutions, introducing which makes it easier and more comfortable to use their tools. For example, Shtil has such technical innovations as:

The STIHL M-Tronic system, which makes starting the chainsaw easier thanks to a fully electronic ignition system. The system independently distinguishes a cold start from a hot one. M-Tronic also accurately sets the ignition timing and regulates the amount of fuel mixture at the moment the chainsaw starts; HD2 filter. This filter is made of polyethylene, which has pores that are 70 percent smaller than a conventional filter. It repels oil and is easy to clean, which adds comfort when servicing the chainsaw on which it is installed; compensator

This is a special device in the carburetor that allows you to operate a chainsaw even with a completely dirty air filter, and an important feature is that the saw practically does not lose power; the catalyst burns unburnt fuel, due to which the chainsaw exhaust contains fewer harmful impurities that adversely affect the human body.

If you look at the technical innovations of the Husqvarna company, you can also highlight several interesting systems:

• Air Injection (air purification system) is a centrifugal air purification system, which increases the cleaning interval of the filter element;
• X-Torq System reduces the amount of harmful emissions and, as the manufacturer notes, a tool equipped with this system consumes less fuel compared to chainsaws of similar engine capacity;
• AutoTune is a system for automatically tuning the optimal parameters necessary for stable engine operation. The manufacturer does not provide more details about how the system works.

If you take two chainsaws of the same volume from the Shtil and Husqvarna companies, they will be similar only in that they are equipped with an internal combustion engine, a tire and a saw chain. But everything, even the standard elements of these chainsaws, differ in size, shape and materials from which they are made. Moreover, it is worth noting that thanks to the efforts of engineers, with the same cylinder volume, Stihl chainsaws have greater maximum power, which will be noticeable when comparing specific models of chainsaws.

Summing up

The reliable, lightweight and modern Shtil MC 211 chainsaw is the choice of those who love a combination of high performance and comfort. This model has exactly these properties.

It is also worth noting that thanks to the promotions that the Shtil company regularly holds (details about them can be found on the official website), when purchasing a saw from an official representative, you can save a lot.

If you have recently become the owner of the tool, then you should know that after running-in, the carburetor on the Shtil 211 chainsaw needs to be adjusted. You can do this yourself; setup instructions are in the user manual, and can also be found on our website.