Drilling rig dml – Characteristics and photos of the drilling rig DML and its modifications: LP 1200 and SP


Characteristics and photos of the DML drilling rig and its modifications: LP 1200 and SP

The equipment of a drilling rig depends on the conditions in which it will work, the purpose of the well, the properties of the soil and the drilling method.

Manufacturer and purpose of DML drilling rigs

Founded in 1873 in Stockholm, it produces equipment for the construction, drilling, and railway industries. The constant pursuit of perfection has made the equipment from the Swedish brand unsurpassedly effective.

The four main industries that Atlas Copco focuses on are:

  • equipment for mines and drilling;
  • mobile equipment for construction and energy generation;
  • compressors;
  • tools for industry.

The Atlas Copco DML series of drilling rigs is designed for rotary drilling.
The depth of the wells is in the middle range. Drilling that is carried out using these installations:

  • rotary - rotational drilling, when a bit (a tool for breaking rock) deepens the depth of a cylindrical well; rotation is transmitted to it from the rotor through a column of drilling pipes;
  • the rotor receives rotation from the engine;
  • drilling using a down-the-hole hammer - multi-pass.

Design Features

DML units are mobile equipment; they are equipped with crawler tracks and hydraulic drive. The upper hydraulic drive is a development designed for drilling explosive-type wells up to 53.3 meters deep. When replacing the pipe, a depth of 62.5 meters can be achieved. For standard and additional pipes (9.15 and 10.7 m), additional carousels with different volumes are provided.

Photo of DML drilling rig

During drilling, a load of 267 kN is created on the bit. Additional equipment makes angular drilling possible when the column deviates from the vertical by 30 degrees or more.

Advantages:

  • the ability to lift a column with a carousel, which contains six drill pipes, in less than a minute;
  • the operator remotely, while in the cabin, changes pipes and secures the carousel; The cabin equipment is FOPS certified;
  • visibility from the cabin allows you to control the operation of the rotor;
  • the high-pressure compressor is equipped with an on-off system that eliminates the load during work not related to drilling;
  • this simplifies startup, saves energy, and extends the life of the compressor;
  • The DML drill rig is configured for high or low pressure drilling.

Specifications

Technical characteristics of the DML drilling rig in the table:

CharacteristicsIndicators
Drilling typemulti-pass and rotary
Well (diameter)149-270 mm
Hydraulic force during slaughter267 kN
Hydraulic lifting force98 kN
Weight on crown27,200 kg
Drilling depth per rod length8.5 m
Additional drilling depth per rod10 m
Well depth (maximum)53.5 m
Weightfrom 39 to 50 t
Well (diameter)149-270 mm
Well, depth (optional, maximum)62.5 m
Engine power (deck)540-630 hp

Modifications

There are several modifications of DML drilling rigs, which differ in the type of work performed and have design features.

DML-SP

DML-SP - down-the-hole or impact drilling rig; drilling depth is equal to one rod; well diameter - 25 cm. Well depth - 18.3 m. The installation column is designed for drilling clean wells, there are settings for drilling at an angle of up to 30 degrees.

This modification is designed to work in areas with soft, non-abrasive rocks.

Advantages:

  • time saving: installation covers 18.3 meters in one go;
  • rapid raising and lowering of the column;
  • the operator secures the column remotely while in the cabin;
  • The rig can be configured for rotary and down-the-hole drilling.

Photo of the DML-SP drilling rig

Specifications:

CharacteristicsIndicators
SeriesMid-range drilling rigs
Drilling typeDTH-single pass and rotary
Diameter of the resulting well152-251 mm
Hydraulic force at bottom240 kN
Mass on crown24,500 kg
Depth per boom15.2 m
Depth per boom (optional)18.3 m
Well depth (maximum)15.2 m
Weight41-45 t
Well diameter152-251 mm
Well, maximum depth (optional)18,3

DML LP 1200

This installation is designed for pneumatic percussion (rotary) drilling, drilling and blasting operations: crushing, loosening rocks, ice. For severe climatic conditions, heating of the fuel filter and engine is provided before starting.

Photo of drilling rig DML LP 1200

Specifications:

CharacteristicsIndicators
Initial well diameter:
— rotary drilling190-270 mm
— percussion drilling152-225 mm
Feed force26,700 kg
Speed ​​during feeding and lifting44.5/69 m/min
Deck engine (power)525-820 hp
Drill rod (diameter)114-194 mm
Device weight48-50 t

The video shows the DML 1200 drilling rig in operation:

allspectech.com

Small-sized water drilling rig: mini

Country houses and cottages are not a reason to give up comfortable living conditions. Therefore, the presence of an autonomous water supply in the absence of a centralized one becomes the first task of the owner.

But even if water is supplied to the site from the main line, its quality can be so poor that your own source becomes a necessity no longer for comfort, but for health.

And to drill a well, you just need to purchase the necessary tool - this is a small-sized water drilling rig.

Advantages of MGBU

Small MGBUs are excellent for drilling water wells in private households

Large equipment can easily drill an artesian well, a mine for the extraction of oil, gas and other minerals, but small MGDUs are excellent for drilling water wells in private households. And, by the way, the purchase of such equipment will not particularly affect the family budget, if your site is not the only one in the area, then the drilling machine can generate income from rental.

The installation has many advantages:

  1. Mobility and compactness of equipment;
  2. at the same time, the MGBU for drilling water wells is easy to use;
  3. drilling will not harm the landscape of the site, since the well is drilled using small-sized equipment;
  4. MGBU is very convenient for working in confined spaces and allows drilling wells in garage basements and outbuildings;
  5. Dismountable equipment is extremely convenient to transport and does not require the use of special equipment for installation/dismantling or transfer;
  6. The MGBU receives power from a standard 220-volt outlet, but if necessary, can operate from a mobile power source;
  7. MGBU works quickly, without failures (there is simply nothing to break), allowing you to quickly provide water supply to a country house.

Description of MGBU

MGBU is lightweight, mobile, and has expanded functionality

With its light weight, mobility, expanded functionality in limited spaces, and affordable cost, the drilling rig has the following set of elements:

  • mud pump for injection of solution;
  • swivel to ensure free rotation of the drill, reliability of the entire structure;
  • winch – a lowering/lifting tool that ensures the performance of technological operations;
  • the hoist system lifts and supports the weight of the drill;
  • The circular design has the function of preparing and supplying the solution.

Design features distinguish between drilling methods using small-sized installations: auger, impact, with flushing.

Percussion drilling method

The winch lifts the pipe, then lowers it, loosening the soil, which is pulled up by a bailer

It is the simplest and most accessible. The MGDU for drilling wells is complemented by a metal pipe with a bailer. The winch lifts the pipe, then lowers it, loosening the soil, which is pulled up by the bailer. Plus, the end result is a practical, good underwater mine. Minuses:

  • low speed;
  • mandatory lining of the mine with large-section pipes;
  • when encountering quicksand, the mine will simply collapse.

Auger drilling option

Used for drilling wells in sand and other light soils

It is used for drilling wells in sand and other light soils. Functionally, the shaft is drilled using a rotating auger, which lifts loose soil to the surface. The advantage is that all processes can be carried out point-by-point and without the use of power. Disadvantages - mandatory removal of the auger for cleaning.

It is very convenient to use the auger option for drilling wells in limited space. Thanks to the point notching of the end of the drill, which can be made pointed, and the small turning space of the spiral, the shaft is not wide, which is beneficial when installing a water supply system, for example, in the veranda of a private house.

Drilling with flushing

This is one of the most productive ways to drill water wells

This is one of the most productive ways to drill water wells. The mini drilling rig can reach speeds of up to 10 m/hour, which is significantly faster than any other drilling method. Well flushing can be done using both direct and reverse methods.

Direct - this is when the solution is fed directly along the rod, washes out the soil and transfers it to the surface. Reverse - the solution is fed into the mine, pumped out along with the soil through a pump.

The use of small-sized installations for drilling water wells is also justified in terms of economic indicators - the cost of wells is low, and given that such a mine lasts at least 5-8 years, the payback of the equipment is extremely fast. There are many positive aspects:

  • drilling equipment can be disassembled, removed and used for its intended purpose at any time;
  • using MGBU, shafts are drilled for a pile foundation;
  • You can always drill a mine for water in any convenient place.

The only disadvantage of small-sized installations for drilling water wells is the ineffectiveness of their use on heavy soils; the equipment has no other disadvantages.

Source:

JSC "Mining Solutions"

The Atlas Copco DML drill rig is a track-mounted, hydraulically driven rotary drilling rig located on top of the rig. Due to its versatility, the DML can be used as a high pressure DTH drilling rig.

The DM-LSP is a one-piece drilling rig capable of drilling to depths of up to 18.3 m without extending the rod. With an optional high-pressure air compressor, it can also be used for high-pressure downhole drilling. For an additional fee, the unit can be adapted for drilling at an angle.

Specifications

Rod length, m 9.1 or 10.7
Drilling depth, m 54.9 or 53.3
Feed force, kgf 27216
Feed speed, m/min 0 — 44,5
Lifting speed, m/min 0 — 62,5
Rotation speed, rpm/torque 0–160 rpm/7320 Nm 0–100 rpm/12200 Nm
Standard

Ingersoll-Rand compressor

Rotary drilling, cubic m/min at pressure in kPa34,0 / 758 45,3 / 758 53,8 / 758
Rotary percussion drilling cubic meters per minute at pressure in kPa 34,0 / 2413 41 / 2413
Diesel drive Rotary drilling CAT C15 - 525 hp CAT C16 - 600 hp CAT 3412 -760 hp Cummins QSX15 525/600 hp Cummins QSK 19C 760 hp
Rotary percussion drilling Cummins QSK 19C 760 hp CAT 3412E-760hp
Electric drive
Chassis CAT 330S, ADS undercarriage
Travel speed, km/h 0 — 2,7
Directional drilling 0 — 30°
Operating weight, kg 50 000

www.mining-solutions.ru

Drilling tool

Drill rods and drill string components

The plant has been producing drill rods and drilling string components for domestic and imported machines for more than 18 years. During this time, a large range of these products has been mastered, which in terms of their performance characteristics are not inferior to foreign analogues. In the manufacture of drilling tools, certified modern materials of domestic and imported production are used.

NameOverall dimensions (Ø/ L/ wall thickness), mm
Drilling rig DML-1200
Drill rod DML L-9.1178/ 9240/ 16
Drill rod DML L-10.7178/ 10775/ 16
Bit adapter (lower adapter) DML178/ 1050
Adapter bottom DML178/ 705
Adapter bottom DML178/ 960
Spindle coupling (upper adapter) DML152/ 850
Centering sleeve DML
Drilling rig DM45
Drill rod DM45 Ø140 L-9.1140/ 9235/ 16
Drill rod DM45 Ø159 L-9.1159/ 9240/ 16
Bit adapter DM-45 Ø140140/ 800
Spindle coupling DM-45 Ø140140/ 815
Bit adapter DM-45 Ø159159/ 700
Spindle coupling DM-45 Ø159159/ 845
Drilling rig D50KS
Drill rod D50KS178/ 9249/ 16
Bit adapter D50KS178/ 610
Spindle coupling D50KS163/ 322
Drilling rig T4BH
Drill rod T4BH L-7.62159/ 7725 /16
Drill rod T4BH L-6,295159/ 6400/ 16
Top adapter T4BH159/ 599
Bit adapter T4BH159/ 917
Centering sleeve T4BH
Drilling rig PV-271
Drill rod PV-271 L7740203/ 7740/ 30
Drill rod PV-271 L-5370 (starter)203/ 5370/ 30
Spindle coupling (upper adapter) PV-271219/ 610
Centering sleeve PV-271
Drilling rig D245S
Drill rod D245S Ø140 L-9.1140/ 9230/ 16
Sandvik D75KS drill rig
Drill rod D75KS 000556-006219/ 10800/ 22
Bit adapter D75KS 003557-004219/ 1525
Upper adapter D75KS 010264-001200/ 750
Drilling rig 3SBSh-200
Drill rod 3SBSh-200 damn.08.00.45.100180/ 11970/ 16
End rod 3SBSh-200 damn.08.00.45.200180/ 2390/ 16
End rod 3SBSh-200 damn.08.00.45.200180/ 3200/ 16
Drill rod 3SBSh-200N drawing 08.00.10.000180/ 12070/ 16
Drilling rig 5SBSH-200
Drill rod 5SBSh-200-36 drawing 12.00.10.000180/ 9650/ 16
End rod 5SBSh-200-36 L-2.4 damn.09.00.11.000180/ 2390/ 16
Drilling rig 2SBSH-200
Drill rod 2SBSh-200 drawing 200N.09.06.600180/ 8165/ 16
Drilling rig 4SBSh-200
Drill rod 4SBSh-200 damn.09.00.10.000180/ 8000/ 16

At the Customer's request, it is possible to make design changes

and production according to the provided drawings.

Source

Characteristics and photos of the DML drilling rig and its modifications: LP 1200 and SP

The equipment of a drilling rig depends on the conditions in which it will work, the purpose of the well, the properties of the soil and the drilling method.

Manufacturer and purpose of DML drilling rigs

Founded in 1873 in Stockholm, it produces equipment for the construction, drilling, and railway industries. The constant pursuit of perfection has made the equipment from the Swedish brand unsurpassedly effective.

The four main industries that Atlas Copco focuses on are:

  • equipment for mines and drilling;
  • mobile equipment for construction and energy generation;
  • compressors;
  • tools for industry.

The Atlas Copco DML series of drilling rigs is designed for rotary drilling. The depth of the wells is in the middle range.

Drilling that is carried out using these installations:

  • rotary - rotational drilling, when a bit (a tool for breaking rock) deepens the depth of a cylindrical well; rotation is transmitted to it from the rotor through a column of drilling pipes;
  • the rotor receives rotation from the engine;
  • drilling using a down-the-hole hammer - multi-pass.

Design Features

DML units are mobile equipment; they are equipped with crawler tracks and hydraulic drive. The upper hydraulic drive is a development designed for drilling explosive-type wells up to 53.3 meters deep. When replacing the pipe, a depth of 62.5 meters can be achieved. For standard and additional pipes (9.15 and 10.7 m), additional carousels with different volumes are provided.

Photo of DML drilling rig

During drilling, a load of 267 kN is created on the bit. Additional equipment makes angular drilling possible when the column deviates from the vertical by 30 degrees or more.

Advantages:

  • the ability to lift a column with a carousel, which contains six drill pipes, in less than a minute;
  • the operator remotely, while in the cabin, changes pipes and secures the carousel; The cabin equipment is FOPS certified;
  • visibility from the cabin allows you to control the operation of the rotor;
  • the high-pressure compressor is equipped with an on-off system that eliminates the load during work not related to drilling;
  • this simplifies startup, saves energy, and extends the life of the compressor;
  • The DML drill rig is configured for high or low pressure drilling.

Specifications

Technical characteristics of the DML drilling rig in the table:

CharacteristicsIndicators
Drilling typemulti-pass and rotary
Well (diameter)149-270 mm
Hydraulic force during slaughter267 kN
Hydraulic lifting force98 kN
Weight on crown27,200 kg
Drilling depth per rod length8.5 m
Additional drilling depth per rod10 m
Well depth (maximum)53.5 m
Weightfrom 39 to 50 t
Well (diameter)149-270 mm
Well, depth (optional, maximum)62.5 m
Engine power (deck)540-630 hp

Modifications

There are several modifications of DML drilling rigs, which differ in the type of work performed and have design features.

DML-SP

DML-SP - down-the-hole or impact drilling rig; drilling depth is equal to one rod; well diameter - 25 cm. Well depth - 18.3 m. The installation column is designed for drilling clean wells, there are settings for drilling at an angle of up to 30 degrees.

This modification is designed to work in areas with soft, non-abrasive rocks.

Advantages:

  • time saving: installation covers 18.3 meters in one go;
  • rapid raising and lowering of the column;
  • the operator secures the column remotely while in the cabin;
  • The rig can be configured for rotary and down-the-hole drilling.

Photo of the DML-SP drilling rig

Specifications:

CharacteristicsIndicators
SeriesMid-range drilling rigs
Drilling typeDTH-single pass and rotary
Diameter of the resulting well152-251 mm
Hydraulic force at bottom240 kN
Mass on crown24,500 kg
Depth per boom15.2 m
Depth per boom (optional)18.3 m
Well depth (maximum)15.2 m
Weight41-45 t
Well diameter152-251 mm
Well, maximum depth (optional)18,3

DML LP 1200

This installation is designed for pneumatic percussion (rotary) drilling, drilling and blasting operations: crushing, loosening rocks, ice. For severe climatic conditions, heating of the fuel filter and engine is provided before starting.

Photo of drilling rig DML LP 1200

Specifications:

CharacteristicsIndicators
Initial well diameter:
— rotary drilling190-270 mm
— percussion drilling152-225 mm
Feed force26,700 kg
Speed ​​during feeding and lifting44.5/69 m/min
Deck engine (power)525-820 hp
Drill rod (diameter)114-194 mm
Device weight48-50 t

magistraltrade.ru

Small-sized water well drilling

Home » Water well drilling » Small-sized drilling

Drilling a well with a small-sized rig in the Moscow Region

offers its clients in Moscow and Moscow Region fast, inexpensive, convenient and effective small-sized drilling of water wells on favorable terms.

We have trained engineering and drilling specialists, modern technologies, high-quality drilling rigs and construction materials for equipping wells and autonomous water supply systems for dachas, private houses, cottages and small businesses.

Drilling water wells with a small-sized installation is a modern way of creating water wells on small plots of land, where there is not enough space to equip a large well and there are cramped conditions for the operation of drilling equipment.

A small-sized drilling rig is a compact (can fit into gates, fence sections and doors), lightweight portable/self-propelled unit that does not require a massive chassis and a large area for drilling operations. At the same time she:

  • performs drilling using several methods (auger/percussion/rotary);
  • can drill wells directly under a house or technical room;
  • quickly drills wells up to 100 meters deep with smooth walls (high speed due to the rapid expansion of drill rods and the use of flushing solution);
  • works in any weather conditions (-20+40С);
  • can connect to nearby power networks;
  • serviced by 2-3 specialists;
  • does not spoil the surrounding landscape and does not create dirt.

The best option is to drill an Abyssinian well of shallow depth, for which the installation requires several square meters of working area and a couple of meters of height. An important point: drilling wells with a small-sized drilling rig has a minimum cost and is maximally accessible to a wide range of private customers.

Drilling using uPVC pipes

Compact mobile drilling rigs are simple and reliable equipment for drilling wells in engineering geological surveys and for a wide range of other purposes. PC Anker Geo offers portable drilling rigs from leading Russian manufacturers for purchase.
The UKB-12/25-02 drilling machine is easy to transport and allows you to perform drilling work in the most inaccessible areas. The model is mounted on a sled and has sufficient maneuverability to move even over difficult terrain.Read more
The small-sized drilling rig UKB-12/25-01 is optimally suited for creating wells in remote areas. To increase maneuverability and maneuverability, the compact model can be installed on the chassis of any vehicle with sufficient carrying capacity.More
The UKB-12/25I small drilling rig is specially designed to perform a wide range of drilling operations in confined spaces. The model has compact parameters and is easy to transport. Read more
The UKB-12/25 small drilling rig is an excellent choice for working on hard-to-reach construction sites and areas with difficult terrain. Model UKB-12/25 is compact in size and easy to transport. Read more
The KM-10I motor drill is an improved analogue of the KM-10 installation, designed for use in problematic conditions. Unlike the KM-10 model, equipped with a SAD-5 diesel engine, the KM-10I Motobur is powered by an engine from the American brand Briggs & Stratton. Read more
MGBU-200 is a fully hydraulic, medium-sized, modular multi-purpose drilling rig for geotechnical surveys and construction.Read more
The UBM-230-03 model is equipped with modern powerful hydraulics and makes it possible to drill wells in horizontal, vertical and inclined directions.Read more
The small drilling rig MGBU-800 from the popular Termit line is universal equipment for creating wells and carrying out a wide range of construction work.Read more
The hydraulically driven drilling rig with a movable rotator BU-90 is designed for drilling with flushing of vertical wells up to 50 meters deep, up to 20 meters with and without core removal, dry, during seismic exploration and engineering surveys in construction.More

DML - OJSC "Technological Drilling"

DML

The Atlas Copco crawler-mounted DML drilling rig is equipped with a hydraulically driven rotator and is designed for industrial drilling of wells up to 54.8 m deep, with replaceable rods 9.1 m long. The nominal diameter of wells for rotary drilling is 190–270 mm. When drilling using a high-pressure down-the-hole hammer, the nominal hole diameter is 152–225 mm. The load on the bit created by the feed pressure reaches 27,216 kg. It is possible to drill inclined wells. The standard DML drill rig uses a diesel engine to drive the air compressor and hydraulic system. The drilling operation is carried out using electro-hydraulic controls.

Specifications

Feed force27,216 kgf
Feed/lift speed33.3/55.2 m/min
Torque/at speed12,200 Nm / 100 rpm 7,320 Nm / 160 rpm
Maximum drilling depth9.1–54.8 m
Deck engine power525–765 hp (391–570 kW)
Compressor: capacity/pressure34–54 m³/min/7.6 bar 35.4–41 m³/min/24 bar
Drill pipes: diameter/length114–194 mm / 9.1 (10.7) m
Operating weight of the unit48–50 tons

Ask a Question

www.technobur.ru

JSC "Mining Solutions"

At the Berezovsky open-pit mine, 2 WORLD production records were set.

the Epiroc (Atlas Copco) DML-1200 drilling rig drilled more than 48 thousand linear meters of wells in a month.

The rod of the DML-1200 drilling rig makes up to 1500 revolutions per minute and plunges into the ground to a depth of 9 meters. At this time, there is minimal noise in the driver's cabin. It is equipped with the latest technology - it has air conditioning, a ventilation system and reinforced glass. But there is no need to be afraid of dust or rock fragments - the drilling site is securely covered with a special curtain. A few minutes and the mast of the drilling rig rises, revealing a small-diameter well. The cutting team made more than 5 thousand of these in a month.

Evgeny Bukalov, head of the branch of Mining Solutions in Kemerovo:

— “The Mining Solutions company, as the official supplier of this equipment in Russia, confirms that this is indeed a WORLD RECORD: a daily world record with a result of 2088 linear meters and a monthly world record of 48021 linear meters.”

The new drilling rig went into production this spring. The world record is the result of a collaboration between the customer’s professionalism and the coordinated actions of the Mining Solutions service department.

There are already 20 such drilling rigs, more than half are working at the Berezovsky open-pit mine. They also provide the highest performance indicators. This world record for drillers has become the seventh one recently set by Stroyservis miners.

Links to news:

https://vesti42.ru/news/50580-razrez-berezovskiy—mirovie-rekordi-gornyakov-bez-shuma-i-pili/

https://27trk.ru/news/prokopievsk/75225/

https://www.tvn-tv.ru/news/industry/rekordy_burovoy_ustanovki_na_razreze_berezovskiy.html

www.mining-solutions.ru

JSC "Mining Solutions"

Large surface drilling rigs made in the USA (ADS).

DM45HP

The DM45HP high pressure drilling rig is mounted on a crawler base for rotary and rotary percussion drilling.

more details

DM45LP

DM45LP Low Pressure Crawler Drilling Rig for Composite Rotary Drilling

more details

DML

DML drilling rig (high and low pressure) on a crawler base, designed for rotary and rotary percussion drilling with a composite drill with a hydraulic drive located at the top of the machine.

more details

DM-M3

The DM-M3 crawler-mounted drilling rig is equipped with a hydraulically driven rotator and is designed for industrial rotary drilling of wells

more details

PV235

The Atlas Copco Pit Viper-235 drilling rig is one of the most modern and efficient in the world.

more details

PV271

The PV271 drilling rig on a crawler base with a top drive for rotary percussion drilling in one piece will provide unsurpassed efficiency in the process of drilling blast holes

more details

PV275

Multi-pass drilling rig PV275 on a crawler base with a top drive for drilling with a composite string

more details

PV351

Drilling rig PV351. The most powerful machine in the entire Atlas Copco line. Designed for rotary drilling of industrial wells with a diameter of up to 406 mm

more details

T4BH

The T4BH drilling rig, mounted on a special chassis, is designed for rotary impact drilling of blast holes. Adapted for movement on public roads and operation in difficult terrain

more details

www.mining-solutions.ru

Rating
( 1 rating, average 5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]