✅ Excavator Tatra UDS-114: planner, characteristics, review, description

Basic prices for an 8-hour shift (1 hour of delivery + 7 hours of work). For large volumes prices may be reduced.

Price per shift, from RUB (regular boom) 18,000

Price per shift, rub (with 1.5 m extension cord) 23,000

Price for 1 hour, from RUB 2,250

Delivery outside the Moscow Ring Road, from RUR/km 50

Tatra UDS (UDS) 114 is a full-rotary wheeled excavator equipped with a telescopic boom 10 m long. If necessary, a quick change of various attachments is possible. The excavator is designed to perform complex earthworks that cannot be accomplished with a conventional excavator or grader.

The excavator planner UDS 114 based on the Tatra 815 automobile platform, produced in the territory of the former Czechoslovakia, can be distinguished from many other types of full-rotary excavators with telescopic booms in that, in addition to earthmoving work, with regard to digging the ground, it can perform a lot of other tasks. If necessary, a quick change of various attachments is possible. The excavator is designed to perform complex earthworks that cannot be accomplished with a conventional excavator or grader.

Here is a list of possible work that can be carried out with the Tatra UDS 114 excavator:
– build embankments more than 2.5 meters high;
– plan and clean slopes and ditches of roads;
– clean debris and silt from ponds and streams;
– dig pits at an angle of ninety degrees and a depth of up to 5.5 m, and with a boom extension up to 7 m;
– work in places with limited height;
– dig under communications and pipes;
– work as a crane or manipulator with loads up to 4 tons.
That is, to do a lot of work that is inaccessible to either conventional excavators using articulated-lever equipment or graders.

The fact is that the Tatra UDS 114 has a distinctive feature that makes this excavator so versatile: it is a telescopic boom with a rotating bucket around its axis.

For many customers, this excavator becomes a kind of “lifesaver” and for this it is popularly nicknamed the “golden pen”. And also, in its class, Tatra UDS 114 is the best solution in terms of price/quality ratio.

It is used with equal success both in large-scale construction and road work and in excavation work for private clients.

But the main advantage of the Tatra UDS 114 excavator is its mobility. It was developed on the basis of the TATRA 815 truck, so it can reach speeds of up to 70 km/h and, unlike tracked and pneumatic excavators, the Tatra UDS 114 is able to get to the construction site independently - without expensive delivery on a truck.

Thus, transporting excavators on a low-loader platform costs an average of 20,000 rubles. one way only! The savings are simple and straightforward. The performance of this excavator is enough to take on large orders and long-term use.

click on photo to enlarge

Excavator purpose

This car is special. Truck crane and earth mover in one. A successful solution was to place the excavator unit on a vehicle base, in this case a Tatra. These excavators began to be produced more than 20 years ago in Slovakia. The result was mobile, powerful special equipment. The Tatra planner excavator can make embankments up to 15 meters high. Due to the fact that the unit is located on the machine, it arrives at the work site under its own power at high speed. Can work on steep slopes. Where other technology cannot work. The UDS 114 excavator is more powerful than a conventional construction excavator. A platform with a boom or bucket (replaceable equipment) can be installed on other machines, not only on Tatra - on Kamaz, MAZ, Ural.

It is used in road construction in preparation for laying roads. Levels the soil before adding crushed stone. It is used to improve the terrain before building bridges. Works exactly. Where it is necessary to deeply open the soil with already laid communications. To avoid touching the pipelines, this excavator is used. It can dig deep pits and trenches at an angle of 90%. It has proven itself well in the Far North and can work in permafrost conditions.

The technical characteristics of the Tatra UDS 114 are such that this machine has found application not only in construction. Works in the oil and gas industry, geological exploration and other places where work is needed in hard-to-reach places. Can be used as a forklift and stacker. Its analogues are the Belarusian excavators “ANTEY” and “SVYATOVIT”.

Excavator TATRA-815 UDS-114

TATRA UDS 114 is a full-rotary excavator. Equipped with a rotating telescopic boom. If necessary, a quick change of various attachments is possible. Designed to perform complex earthmoving work that cannot be accomplished with a conventional excavator or grader.

Excavator-planner UDS 114 based on Tatra 815 - this excavator on a vehicle platform, produced in the territory of the former Czechoslovakia, can be distinguished from many types of other full-rotary excavators with telescopic booms in that, in addition to purely earthmoving work, regarding digging the ground, it can also perform a lot others.

For example, Tatra Uds 114, it can fill embankments more than two and a half meters high, level and clean slopes, dig pits at an angle of ninety degrees, work in places with limited height; dig under communications and pipes; work as a crane or manipulator.

That is, to do a lot of things that are inaccessible to either conventional excavators using articulated-lever equipment or graders. The fact is that the TATRA UDS 114 has a distinctive feature that makes this excavator so versatile, namely, a telescopic boom with quick-change attachments rotating around its axis.

For many owners, this car becomes a kind of “lifesaver.” TATRA diesel engine, air-cooled, 12 cylinders, 360 hp.

The Tatra UDS 114 excavator is designed for all finishing excavation work. The main shovel with a size of 0.6 m3 can crush and extract soil of classes 2,3,4,5 with a volumetric weight of up to 1800 kg/m3. The maximum tilt angle is 90 degrees.

The safety supports are extended from the operator's cabin. Digging force 85 kN Digging depth 6.6 m Digging height 7.7 m Digging radius 10.5 m
Productivity 108m3/hour
Engine ZETOR Z-8703, 6 cylinders, in-line, water cooling.

The Tatra UDS114 planner excavator on the Tatra 815 all-terrain chassis is the No. 1 assistant for road construction organizations. It is used for work on leveling soil slopes, digging soil with subsequent loading, and loosening the soil of road surfaces.

The UDS 114 Tatra 815 excavator is used in road construction organizations in the construction of new roads, repair and maintenance of existing ones. The uniqueness of UDS 114 lies in its “squire” – Tatra 815.

The high torsional and bending rigidity of the Tatra 815 chassis protects the UDS 114 technological excavator from deformation.

The design of the three-axle Tatra 815 chassis with swinging axle shafts allows each wheel to follow the terrain, eliminating vibration effects on the Tatra UDS 114 (UDS-114) excavator, and also increases comfort and off-road transport speed. All-wheel drive and differential lock allow you to get to hard-to-reach places.

General technical specifications

The all-wheel drive planer excavator Tatra UDS 114 weighs 22 tons 300 kg. Has the following parameters:

digs to a depth of 6 meters 60 cm;
develops slopes up to a height of 7 meters 70 cm;
treats the soil around itself with a diameter of up to 10 meters;
digging force – 85 Kn.;
has two drive axles, rear wheels are paired;
can produce soil 108 m3/h;
two fuel tanks hold 400 kg. diesel fuel.

When working as a crane with the boom extended to maximum, it lifts a maximum weight of 2,600 kg. When the boom reaches its minimum, it lifts 7 tons. Excavator attachments have many functions and are therefore varied. These are all kinds of knives, buckets (with and without teeth), pliers, grippers, grabs, asphalt cutters, arrows of different sections, hydraulic hammers and mowers. Diesel fuel consumption during operation of a tower (crane, excavator, etc.) is 10 liters per hour.

Engine characteristics

The excavator platform has a John Deere 4045 HF 275 motor, its parameters:

4 cylinders;
holds 4.5 liters of diesel fuel;
rotates 2000 rpm;
has a voltage of 24 V;

The diesel platform in question operates separately from the machine on which it is installed.

Excavator device

The excavator platform can be installed on any powerful vehicle. Initially installed on the Slovak Tatra car. A platform that, together with attached working equipment, rotates 360 degrees. Thanks to this, the excavator gained popularity among road workers and representatives of other industrial professions. The power of the excavator is provided by a power unit with hydraulic drives and other working units. There is a special hydraulic tank that holds 150 liters of oil.

The driver's cabin is spacious, comfortable for work, and has air conditioning and ventilation. The machine has a boom driven by two powerful hydraulic pumps located on the sides below.

Tatra UDS 114 trucks have a high-power propulsion unit. The first production of cars had 3 drive axles. Subsequently we moved to 2 bridges. The car has a 6-cylinder diesel unit with a capacity of 12.7 liters. diesel fuel. The car was equipped with smooth wheels. There is no rear heating, since the car was originally prepared as a base for a crane and excavator. In the northern versions of the vehicle, the design provided for additional heating of the diesel engine, the vehicle cabin, and the driver’s cabin.

Advantages and disadvantages

Now the Tatra UDS 114 has not been produced for a long time. Instead, UDS 214 are produced. But there are still a lot of spare parts for the old modification of the car. In addition, the manufacturing plant continues to produce spare parts and provides countries operating the machines with new spare parts.

There are also disadvantages. Often the structure of this car becomes bent due to difficult working conditions. This is easy to detect; you just need to look closely at the car standing on a flat surface. If there is one, then, after straightening the structure, you need to strengthen the frame with additional rods, weld additional cross members and corners. Another drawback: when moving, during hauls, a lot of fuel is spent - 40 liters per 100 km. But with everything else, the technical characteristics of the Tatra 815 UDS 114 greatly distinguish the car from other diesel engines in its power and mobility.

Reviews

The car has proven itself on the most positive side. Drivers speak very highly of it. The planner can drive onto any slope. Stops. The operator of the rotating tower with attachments extends the supports. Fastens. Starts working. Hence the name - planner. Sets the terrain plan. And if something is wrong, he corrects it. Few units can have so many options for attachments. It is for this multifaceted versatility that people value this car and dream of purchasing it. When acquired, they treasure it like a treasure. Because this one machine replaces a dozen others.

For clarity, as an excavator it processes the soil both below and above with the same speed and force. Down - 7 meters, up the same 7. Changing a bucket with teeth to a toothless one allows you to adapt to the ground. Depending, in some places the soil is loose and in others it is hard. Hour after hour, the machine changes the environment around itself. Changing your location from time to time. These excavators rarely break down.

Only used cars are sold. They sell out quickly. Used prices vary widely, from 1 million rubles to 400 thousand. Depends on the year of manufacture and technical condition.

A week - and the entire area where she worked became different. This is why they love this technique - for its great endurance and ability to work.

Description of the Tatra excavator

The UDS excavator is a hydraulic mechanism mounted on the chassis of a Tatra 815 vehicle. It is used for excavation, when performing repairs on water, gas and oil pipelines, at various urban, agricultural and road transport construction sites.

Such planners are used on roads that are designed to accommodate vehicles with an axle load of 90 kN. For the Tatra UDS-114 excavator there are special devices and additional tools with which small and medium-sized earthmoving work can be carried out:

soil development;
making foundation pits;
digging ditches;
mining of loosened rocks.

When using an all-wheel drive chassis, planners are used on construction sites. Various attachments can be attached to the machine:

ladle;
grab;
drill rod;
hydraulic hammer;
bulldozer blade.

Planers differ from conventional excavators in their ability to rotate the bucket 360º. The operation of the telescopic equipment and control unit determines the capabilities of the machine.

Since the unit combines forward motion with bucket rotation, it can be used to create embankments and slopes that are below the level of the machine.

Thanks to the rotating bucket, it is possible to level the walls and bottom of the trench and dig around the pipe. The compactness of the machine allows you to carry out work under a bridge or in a tunnel. When using a load hook and an extendable boom, the unit can be used as a crane.

Excavator-planner UDS-114 consists of the following parts:

base chassis;
universal rotary platform;
slewing support;
telescopic equipment.

Usually a Tatra automobile chassis is used, but a special wheeled or tracked one can also be used. The planner has a power plant, rotating mechanisms and hydraulic drives, and a driver’s cabin on a rotating platform. The rotating support mechanism makes it possible to rotate the platform in any direction. Telescopic equipment is represented by a boom, a bucket and attachments, as well as the mechanisms that drive them.

Rent Tatra UDS 114

ATRA UDS 114 is a full-rotation wheeled excavator, equipped with a telescopic boom. If necessary, it is possible to quickly change various attachments. This excavator is designed to perform earthmoving work of varying complexity that cannot be done with a conventional excavator or grader.

Thanks to its abilities, the Tatra UDS 114 is able to erect embankments more than 2.5 meters high; clean and plan road ditches and slopes; clean streams and ponds of silt and debris; at an angle of ninety degrees and a depth of up to 5.5 m.

dig pits, also work in places with limited height; dig under pipes and communications; work as a manipulator with loads of up to four tons or a crane.

That is, to do a lot of work that is inaccessible to the most ordinary excavators, which also use articulated-lever equipment.

The T ATRA UDS 114 has a distinctive feature that makes this excavator very versatile, namely a telescopic boom with a bucket rotating around its axis. For most customers, such an excavator serves as a kind of “lifesaver.”

Tatra UDS 114 is a very modern and versatile excavator-leveler, which, due to its unique properties and high precision of work, is popularly called the “golden handle”.

And this is true, in its class the Tatra UDS 114 is an advantageous solution in terms of price/quality ratio.

It is used with equal popularity and success for large-scale road and construction work, and for private clients during excavation work.

And finally, the most important advantage of the Tatra UDS-114A is its mobility. This vehicle was developed on the basis of the TATRA-815 truck, so it can reach speeds of up to 70 km/h.

and, unlike crawler excavators, it is pneumatically driven, the Tatra UDS 114 is able to get to the construction site independently - without involving delivery by special transport.

Our company will be happy to provide you with a Tatra UDS 114 for rent, at minimal cost but with high-quality work from our specialists!

Technical characteristics of UDS 114:
Rent of Tatra UDS 114 (TATRA UDS 114) is possible under the following conditions:

Machine Price per shift, rub. Supply within the Moscow Ring Road, rub.

Tatra UDS 114 From 18,000.00 2,000.00

Specifications

The technical characteristics of the UDS-114 scheduler are as follows:

The base chassis is Tatra 815.
The transport speed of the vehicle is 80 km/h.
The engine of the planner platform is John Deere 4045 HF 275. The decoding of the index 275 shows the toxicity level of the engine.
Hydraulic control - Bosch Rexroth system.
The volume of the excavator bucket is 0.4-0.75 m³.
Machine productivity is 115 m³/h.
The depth of digging a pit or trench is 6600 mm.
Load capacity from 2600 to 7000 kg.

Knowing the technical characteristics of UDS excavators, you can select the mechanism that should be used at a particular construction site.

Features of Excavator Planer

The modern excavator planner UDS-114 is capable of performing work of any complexity, regardless of terrain conditions. The main feature of the excavator is the fact that the equipment can work in hard-to-reach places, under large slopes, under bridges and other engineering structures. In its design, the machine resembles a mixture of a truck crane and an earth-moving device. The excavator unit is installed on the base of a truck, which often has increased cross-country ability.

wide range of work;
high transportation speed;
maneuverability on site;
saving money;
simplicity and reliability;

A truck-mounted excavator is perhaps the most successful solution, thanks to which the performance characteristics of the equipment are increased. To move between objects, you do not need to use an additional vehicle as a tractor, because the excavator-planner is capable of getting to its destination on its own pneumatic wheels, at the speed of a regular truck. Various types of wheels are installed on the chassis of this equipment, depending on the specific operating conditions.

Excavator planner Tatra 815 UDS 114

Price:

Manufacturer: Tatra

For many owners, this car becomes a kind of “lifesaver”.

Year of manufacture – 2004. Mileage 3000 km.

Excavator installation UDS-114 after dealer repair.

In 2009, engine regulations were carried out, rubber goods and electrical wiring were replaced, and pre-sale preparation was carried out.

TATRA diesel engine, air-cooled, 12 cylinders, 360 hp.

The safety supports are extended from the operator's cabin.

Digging force 85kN

Digging depth 6.6m

Digging height 7.7m

Digging radius 10.5m

Productivity 108m3/hour

Engine ZETOR Z-8703, 6 cylinders, in-line, water cooling.

The high torsional and bending rigidity of the Tatra 815 chassis protects the UDS 114 technological excavator from deformation.

The design of the three-axle Tatra 815 chassis with swinging axle shafts allows each wheel to follow the terrain, eliminating vibration effects on the Tatra UDS 114 (UDS-114) excavator, and also increases comfort and off-road transport speed. All-wheel drive and differential lock allow you to get to hard-to-reach places.

Additional options for the Tatra 815 UDS 114 excavator:

Autonomous wheel inflation system

Reviews about Excavator planner Tatra 815 UDS 114

Didn't find what you were looking for here? Use the search

UDS-114 on TATRA chassis features

The universal installation UDS-114 based on the Tatra vehicle is a special excavator-type structure, which is attached to the load-bearing frame of the truck using a welded metal frame. At the same time, the car frame is necessarily strengthened in all main places where the maximum load is observed. Most often, the frame has transverse struts that are welded directly into the supporting frame itself. Thanks to the spacers, the excavator does not deform the vehicle base during its work. UDS-114 has a rotating telescopic boom, which is driven by powerful hydraulic cylinders located under the main frame and inside the boom. This installation based on a TATRA vehicle has great potential for performing a different range of work, in particular, the equipment can be used as an excavator or a crane. The special design of the boom allows the excavator to develop pits at 90 degrees, as well as to undermine the soil under already installed communications, facilitating the work of technical personnel. The equipment has much greater capabilities than a conventional construction excavator.

Technical component

Tatra UDS-114 trucks are equipped with an increased power engine, as well as high-performance hydraulic pumps. In its model range, the TATRA 815 initially occupied the place of off-road trucks. The first cars were produced with all-wheel drive and 3 drive axles, but in the latest versions the developers limited the number of drive axles to 2. UDS-114 units are most often mounted on city cars that have a chassis with smooth tires. Under the hood of the truck is a 320-horsepower six-cylinder diesel unit (some versions had engines of about 500 hp) with a volume of 12.7 liters. Very often, cars of this brand were equipped with a “northern package”, which included an additional heating system for the engine, cabin and body. Versions with a crane installation do not have a body, so they are deprived of rear heating in advance. The machines have proven themselves to be excellent in domestic operating conditions, just like wheeled excavators.

Performance characteristics

The technical characteristics of the Tatra UDS-114 truck, which still allow it to carry out many complex excavation works, has good performance in terms of operation in different climatic conditions.

Technical characteristics of TATRA with UDS 114:

power unit - diesel internal combustion engine, volume 12.7 liters, power 320 hp. With;
transmission – mechanical, 5-speed (depending on configuration);
chassis type - 2 drive axles, with twin rear wheels;
digging force – 85 KN;
digging depth - 6.6 meters;
soil development height – 7.7 meters;
soil development radius – 10 meters;
productivity – 108 m3/hour;
bucket volume – 0.63 cubic meters. m;
total weight – 22,310 kg;
tank volume – 400 liters (1+1).

Rent an excavator UDS 114 Tatra

Home Rental of special equipment Rental of excavator UDS 114 Tatra

The UDS 114 planner is a specialized earth-moving machine used in various branches of construction. It is assembled on the Tatra chassis of several modifications, which is highly valued among professionals for its high cross-country ability and reliability in difficult conditions.

The following equipment can be installed on the telescopic boom of the UDS:

Ladle;
Grab;
Hydraulic hammer;
Hydraulic shears;
Ripper;
Dump;
Hook.

Excavator "Golden Handle" and its features

It is called the “Golden Handle” for a reason - this excavator is designed specifically to level slopes at a certain angle, as well as dig trenches, and not simple ones, but in close proximity to various building structures or even under them. No other type of earthmoving machine can do this!

It is not surprising that when the need arises to rent a leveling excavator, everyone wants to order the UDS 114. Tatra , by the way, is not always used as a chassis. There are UDS that are assembled on the basis of Mercedes-Benz, MAN or even KamAZ, but those that have a classic, time-tested configuration are rightfully considered the best.

UDS excavator for rent on favorable terms

Rent of a planning excavator based on UDS Tatra

Bucket volume Digging depth Boom reach Price per shift Next hour Cost 1 km. leaving the Moscow Ring Road

Rent of a “Golden Handle” excavator in Moscow 0.63 4.5 meters 7.5 meters 20,000 rub. 2,500 rub. 50 rub/km.

Road planner services 114 0.63 5.5 meters 7.5 meters 22,000 rub. 2,700 rub. 50 rub/km.

Rent of excavator planner 0.63 6 meters 9 meters 27,000 rub. 3,500 rub. 50 rub/km.

Not everyone can afford to buy a new or even a used excavator; it’s much easier to rent one! UDS 114 was no exception - many people need it, only a few buy it as their own. Most people use rental services. However, there is nothing bad in this; on the contrary, there are continuous advantages!

Renting a Tatra UDS 114 eliminates the need to worry about its maintenance and subsequent storage, as well as incur financial losses from equipment downtime. You use the excavator-planner you need for as long as you need it, everything before or after is our concern!

UDS 114: rent in Moscow and the Moscow region

offers you the rental of the Golden Hand UDS on the most convenient terms. We always do our best to accommodate our clients, which is why they very often become regulars. In other words, our equipment is in great demand, which, however, does not prevent us from maintaining its ideal technical condition.

To use our UDS 114 rental services, call. We are ready to take your call any day of the week, because construction, as we know, does not wait!

Purchase of excavator UDS-411

Today, you can buy Tatra UDS-114 only on the secondary market, since the TATRA 815 model has been officially discontinued for a long time. However, in terms of spare parts, the situation is quite stable; the manufacturer systematically sells many repair kits and spare parts all over the world. During the purchase, you need to pay attention to all the main components for the car: engine, transmission, chassis, suspension, condition of the body and frame. Very often, this special equipment exhibits curvature of the supporting structure, which can be easily detected by placing the vehicle on a flat surface.

TATRA 815 chassis distinctive qualities

The Tatra 815 UDS-114 was equipped with several types of pneumatic-wheeled chassis, with 4x4, 6x6 and 12x12 drive. The most common are smooth, road tires, which are mounted with metal wheels on a base with 2 drive axles. The peculiarity of the suspension is that it is equipped with special air springs and transverse stabilizers, thanks to which it was possible to achieve high cross-country ability and stability during various works. The reliability of the chassis allows the vehicle to be used without repair for 250 thousand km, depending on the weight of the cargo being transported.

Repair options

The highly efficient Ttatra UDS-114 excavator, which has a relatively low price, is capable of performing various types of repair work. Thanks to the leveling excavator, it is possible to construct road embankments for further laying of asphalt pavement, laying a base of crushed stone, developing pits, as well as cutting off old asphalt. In road construction, a road milling machine at MTZ is also indispensable. TATRA 815 is also used for public works, when penetration into hard-to-reach areas is required without compromising the integrity of highways.

Rent of Tatra UDS-114 excavator, Tatra UDS-114

When carrying out complex excavation or leveling work, the rental of a Tatra UDS-114 excavator-leveler is in demand by both construction and road companies.

The reasons for the popularity of this technique are its functionality and ability to perform complex manipulations. This is possible thanks to the special design of the hydraulic boom.

Another important advantage is the ability to quickly install a wide range of attachments, which turns the Tatra UDS-114 into a universal equipment.

Design features of the Tatra UDS 114 leveling excavator

The hydraulic telescopic boom, installed on the base of the Tatra T815 vehicle, has high maneuverability. For this reason, the excavator-leveler is called the “golden handle”, since the bucket is capable of performing manipulations as easily as a person with his hand. This feature is widely used in the formation of highway shoulders and in landscape construction.

The Tatra T815 vehicle, on which an excavator unit is installed, is distinguished by high cross-country ability and maneuverability. Thanks to these qualities, the leveling excavator stands out noticeably against the background of any other earth-moving equipment.

The control of the excavator-planner is combined - hydraulic with electro-hydraulic. The control joysticks are built into the armrests of the operator's cabin, making control as simple as possible and allowing operations to be performed with high precision.

The main shovel of the machine has a volume of 0.6 cubic meters, which allows you to perform a large amount of work in one shift.

Areas of application of the Tatra UDS-114 leveling excavator

The versatility of the equipment is the reason why the leveling excavator is in demand for a wide variety of jobs. It is used in the construction of roads, when laying oil and gas pipelines. This model is used in servicing industrial enterprises and in the construction of buildings and structures for various purposes.

One of the main areas of application is landscape work: a hydraulic boom with a bucket is capable of forming horizontal walls with the same ease with which a simple excavator digs a trench.

No matter how difficult the task associated with excavation work may be, the services of the Tatra uds-114 excavator-leveler will help you cope with it at minimal cost.

Technical characteristics of Tatra uds-114:

You can rent a Tatra UDS-114 excavator-planner in Moscow and the region by calling:

+7,