A leveling excavator is a type of equipment for earth-moving work, the main components of which are a telescopic boom and a bucket. A telescopic boom is a device consisting of two sections that extend one from the other. Its handle, at the end of which a bucket is attached, helps to reach remote places without moving the machine. The planner is a high-tech product that is in great demand.
Excavator Tatra UDS-114: planner, characteristics, review, description
The Tatra excavator is used to create pit slopes, develop trenches, load various materials into dump trucks, loosen soil and excavation of highways. Self-propelled excavator-leveler is used in road construction, repair and restoration of roads.
Description of the Tatra excavator
The UDS excavator is a hydraulic mechanism mounted on the chassis of a Tatra 815 vehicle. It is used for excavation, when performing repairs on water, gas and oil pipelines, at various urban, agricultural and road transport construction sites.
Such planners are used on roads that are designed to accommodate vehicles with an axle load of 90 kN. For the Tatra UDS-114 excavator there are special devices and additional tools with which small and medium-sized earthmoving work can be carried out:
- soil development;
- making foundation pits;
- digging ditches;
- mining of loosened rocks.
When using an all-wheel drive chassis, planners are used on construction sites. Various attachments can be attached to the machine:
- ladle;
- grab;
- drill rod;
- hydraulic hammer;
- bulldozer blade.
Planers differ from conventional excavators in their ability to rotate the bucket 360º. The operation of the telescopic equipment and control unit determines the capabilities of the machine.
Since the unit combines forward motion with bucket rotation, it can be used to create embankments and slopes that are below the level of the machine.
Thanks to the rotating bucket, it is possible to level the walls and bottom of the trench and dig around the pipe. The compactness of the machine allows you to carry out work under a bridge or in a tunnel. When using a load hook and an extendable boom, the unit can be used as a crane.
Excavator-planner UDS-114 consists of the following parts:
- base chassis;
- universal rotary platform;
- slewing support;
- telescopic equipment.
Usually a Tatra automobile chassis is used, but a special wheeled or tracked one can also be used. The planner has a power plant, rotating mechanisms and hydraulic drives, and a driver’s cabin on a rotating platform. The rotating support mechanism makes it possible to rotate the platform in any direction. Telescopic equipment is represented by a boom, a bucket and attachments, as well as the mechanisms that drive them.
Specifications
The technical characteristics of the UDS-114 scheduler are as follows:
- The base chassis is Tatra 815.
- The transport speed of the vehicle is 80 km/h.
- The engine of the planner platform is John Deere 4045 HF 275. The decoding of the index 275 shows the toxicity level of the engine.
- Hydraulic control - Bosch Rexroth system.
- The volume of the excavator bucket is 0.4-0.75 m³.
- Machine productivity is 115 m³/h.
- The depth of digging a pit or trench is 6600 mm.
- Load capacity from 2600 to 7000 kg.
Knowing the technical characteristics of UDS excavators, you can select the mechanism that should be used at a particular construction site.
specmahina.ru
What is a leveling excavator?
The machine was called a planner because thanks to the mechanical device of the telescopic boom and the high mobility of the bucket, it is possible to easily plan sloping places and slopes. It is assembled on a car chassis, providing mobility, which is necessary in our regions.
The movable boom easily penetrates under any obstacle: foundation, pipe, blockage. That is why it is in great demand among gas and oil workers and emergency rescue services. The machine is controlled from the driver's cab. For difficult-to-pass places, for example, with unstable soil, a tracked chassis is installed instead of a car chassis.
In order to expand the capabilities of the machine, the manufacturer began to produce additional buckets, which are easily replaced depending on the type of activity:
- ripper;
- grab grip;
- cargo hook;
- bulldozer blade;
- hydraulic hammer;
- vibrating plate;
- drill rod;
- hydraulic shears, etc.
Many machine-building plants tried to produce planners, but the Czech manufacturer did it best, which produced UDS models on the Tatra automobile chassis. These excavators are deservedly popular with construction organizations.
Description of the Tatra UDS-114 excavator » Tatra UDS 114 excavator
Tatra UDS-114 is a latest generation leveling excavator developed by a well-known Czech company and allows you to solve a wide range of tasks, from excavation work to the construction of oil pipelines.
Tatra UDS-114 carries the most daring and advanced engineering ideas, which were started by the great artist and inventor Leonardo da Vinci. It was he who, back in the sixteenth century, made a drawing of the first earth-moving machine.
Excavator Tatra UDS-114: a journey of hundreds of years
Later, the idea of the brilliant Italian was revised, finalized and brought to life by engineers from France and America. This is how the single-bucket machine was born, which became the image and example for the construction of modern excavators. However, at first mechanical engineering had to go through a long and thorny path.
Czech engineer Ignaz Šustala, born in the first half of the nineteenth century, quickly realized the promise of the cargo and passenger transportation industry.
In 1850, he founded, which was destined to take a leading position in the development of multi-purpose vehicles of the 21st century. But for now, Schustala & Company produced chaises and carriages.
30 years after its founding, the Czech company was already engaged in the construction of railway cars, and in 1897, the first passenger car in Europe came out of its factory. Later, Tatra occupied another niche in the automotive industry - the niche of heavy-duty vehicles.
From year to year, the Czech company demonstrates to the world more and more new engineering achievements; Tatra brand equipment is becoming in demand in Europe and far beyond its borders.
Features of excavators
Today, excavators are produced in a wide range of modifications. They differ in lifting capacity, boom length, type of chassis and other features.
The most versatile are wheeled excavators. Such machines have good mobility and are capable of performing large volumes of work. Their only drawback is the size limitation, and, as a result, more modest technical characteristics.
At the same time, the history of engineering has shown: with the successful combination of ideas, any shortcoming can be neutralized, and the Tatra UDS-114 is a vivid example of this.
Tatra UDS-114 is not just an excavator
A unique feature of the Tatra UDS-114 leveling excavator is that its hydraulic bucket is mounted on the base of a Tatra T815 truck.
Tatra T815 is an extremely reliable vehicle with great cross-country ability, respectable speed and ease of maintenance. The idea of installing a hydraulic bucket system on the Tatra T815 chassis was a real find for Czech engineers.
Thus, an excavator was born, which retained the driving qualities of a truck and was supplemented with a highly efficient bucket system. The Tatra UDS-114 leveling excavator is easy to operate, mobile, and suitable for work in a wide variety of conditions.
tatra114.ru
Tatra - Ural - Excavators UDS / UDS
Excavators UDS / UDS
Excavator-levelers UDS (UDS) are designed for leveling soil slopes and other work: digging soil, loading soil and other materials into vehicles, loosening soil and picking road surfaces. Due to their versatility, UDS leveling excavators have found wide application in the road sector - in the construction, reconstruction, repair and maintenance of highways.
| Chassis TATRA 815-280R21 6×6.2 Euro-3, REXROTH hydraulics (Germany), ability to control chassis movement from the excavator cabin, bucket volume 0.63 m3, digging depth 6.5 m, digging force 85 kN Article: 5002 Detailed description |
| Chassis MAN TGA 26.310 6×6.2 Euro-3, REXROTH hydraulics (Germany), bucket volume 0.63 m3, digging depth 6.5 m, digging force 85 kN. Weight:22310. Dimensions:9794 x 2500 x 3998 Article: 5003 Detailed description |
| Chassis TATRA T815-280R21 6×6.2 Euro-3, REXROTH hydraulics (Germany), bucket volume 0.63 m3, digging depth 6.5 m, digging force 85 kN. Weight: 22310.Size: 8840 x 2500 x 4000 Article: 5001 Detailed description |
| The excavator-planner UDS-114 is a hydraulic universal finishing machine mounted on the chassis of a KAMAZ 53228 vehicle. Designed for all types of excavation work during repair work on water pipelines, oil pipelines and gas pipelines Article: 5004 Detailed description |
Results 1 — 4 of 4
tatra-ural.ru
Sale of excavator-planners UDS-114, UDS-214 for all regions of the Russian Federation
Additional working equipment for UDS leveling excavators:
What do you need to know when selecting and purchasing a new leveling excavator?
Choosing a leveling excavator is a rather complicated matter, as is the equipment of this kind itself. It is necessary to take into account many factors influencing the compliance of such special vehicles with your needs. And first of all, it is necessary to answer a number of important questions, and the first of them, of course, is reliability. Here we can directly say that leveling excavators of the UDS-114 and UDS-214 types mounted on the KAMAZ, MAZ, URAL, TATRA, MAN chassis are deservedly the favorites in this line of manufacturers, and accordingly their cost is slightly higher compared to other brands. But when buying such a unit, a few percent increase in price does not matter when choosing and comparing the quality in the line of earthmoving machines of this class. What is the reliability of UDS? The first is the high quality of the material, its wear resistance, and a unique design, which allows you to operate special equipment one hundred percent and make a profit.
Who makes the UDS-114 and UDS-214 leveling excavators?
Manufacturer: CSM-TISOVEC as Slovakia 980 61, Tisovec, Daxnerova 756, Slovak Republic.
Which chassis should I choose for installing UDS-114, UDS-214?
The brand of chassis on which the UDS excavator unit will be installed is of no small importance, since it is the load-bearing part of the equipment, the basis, which must be no less reliable than the excavator unit itself. The chassis of KAMAZ, TATRA, MAN and others can be used as an installation base. A budget option is installation on a KAMAZ chassis, more expensive excavators on the Tatra and Man chassis. Since excavators are earth-moving machines used in difficult off-road and construction conditions, excavators on all-terrain and all-wheel drive vehicle chassis are mainly in demand, these are the all-terrain KamAZ 43118, KAMAZ 65111, Tatra 851, MAN TGA.
Have you decided to buy a new excavator today?
You can buy a new excavator-planner UDS-114, UDS-214 on the TATRA, KAMAZ, MAN chassis by sending a request to the sales department of the SPETSNEFTEMASH Company. Sales department specialists will promptly provide all the necessary information and advise on all current issues related to the acquisition and operation of excavator-planners UDS114 or UDS214.
We will deliver your excavator-planner to any corner of the Earth!
Our company provides delivery of all special equipment sold to the client. Professional drivers will transport your car urgently with a guarantee of safety and security. It is also possible to deliver special equipment to the buyer’s warehouse by water, rail or air transport. We supply leveling excavators to all cities of Russia: Moscow, Yekaterinburg, Novosibirsk, Surgut, Tver, St. Petersburg, Uzlovaya, Lytkarino, Nyagan, Roslavl, Gelendzhik, Borovichi, Timashevsk, Belorechensk, Solnechnogorsk, Nazarovo, Kirishi, Cheremkhovo, Krasnokamsk, Lesnoy, Vyshny Volochyok, Buguruslan, Berezovsky, Balakhna, Livny, Donetsk, Severomorsk, Sayanogorsk, Kimry, Megion, Kizlyar, Urus-Martan, Snezhinsk, Kingisepp, Zarinsk, Kurganinsk, Shelekhov, Mozhga, Sertolovo, Yartsevo, Shali, Otradny, Torzhok , Ruzaevka, Volkhov, Berezovsky, Kuibyshev, Dzerzhinsky, Gryazi, Chusovoy, Nadym, Verkhnyaya Salda, Safonovo, Osinniki, Kolchugino, Gudermes, Kanash, Rasskazovo, Satka, Monchegorsk, Ust-Kut, Tulun, Krasnoye, Selo, Shebekino, Spassk- Dalny, Kamen-on-Obi, Belaya, Kalitva, Pechora, Chebarkul, Raduzhny, Ust-Labinsk, Mtsensk, Myski, Lomonosov, Kronstadt, Amursk, Kurchatov, Kachkanar, Salekhard, Efremov, Ufa, Chita, Yoshkar-Ola, Izhevsk, Oktyabrsk, Chelyabinsk, Nizhny Novgorod, Kazan, Ryazan and other cities of the Russian Federation.
Video about excavator planners UDS-114 | UDS-214:
Specifications of the Tatra UDS-114 excavator » Tatra UDS 114 excavator
Tatra UDS-114 is a universal auto excavator. The developer and manufacturer of this model of special equipment is Czech, founded in 1850.
Chassis
The Tatra UDS-114 leveling excavator is built on the basis of the Tatra T815 three-axle vehicle platform. The Tatra UDS-114 excavator has high maneuverability and can reach speeds of up to 70 kilometers per hour on a flat road.
Thanks to the special design of the chassis, the wheels of the machine copy the topography of the supporting surface, which ensures a smooth ride even on rough terrain and thus makes the Tatra UDS-114 excavator the optimal solution for working in difficult conditions. Due to this feature, the auto excavator is extremely popular in Russia.
Engine
The machine is equipped with a four-cylinder John Deere 4045HF275 engine with a maximum torque of 2000 rpm and a maximum power of 104 kW. The fuel tank capacity is 400 liters.
Operating parameters and characteristics of the hydraulic system
The Tatra UDS-114 leveling excavator is designed for a wide range of earthmoving operations. The machine is equipped with a telescopic hydraulic boom ending in a bucket.
The Tatra UDS-114 excavator has a combined hydraulic system control system. All main actions are performed directly from the operator's cabin using joysticks.
In order to create the most comfortable working conditions for humans, the manufacturing company's engineers equipped the excavator operator's cabin with a two-speed fan, a ceiling hatch and water heating.
The telescopic boom of the leveling excavator supports a full 360 degrees of rotation. The rotation speed of the working platform is 8 revolutions per minute.
The leveling excavator is designed for excavation work up to 6.6 meters deep. The machine is also capable of creating embankments, and the digging height of this model exceeds 7.5 meters. Dripping efficiency: 108 cubic meters per hour.
The weight of the Tatra UDS-114 autoexcavator is 22310 kg, the maximum load capacity is 7000 kg.
Optional equipment
Tatra UDS-114 supports the quick installation of a wide range of additional equipment: buckets for working with certain types of soil, milling cutters, dumps, hydraulic mowers, etc. Thanks to this, the excavator is able to fully replace other types of special equipment.
tatra114.ru
UDS - 214 on TATRA 815-7 chassis
| Engine | |
| Type: Number of Cylinders: Bore/Stroke: Displacement: Net Power: Net Torque: | TATRA T3D-928-21 EURO V 8 120/140 mm 12,667 cm3 280 kW / 1,800 rpm-11,800 Nm / 1,100-1,200 rpm |
| Clutch | TATRA MFZ 1×430, single disc |
| Transmission | TATRA 10 TS 180 synchronized |
| Number of gears: forward: Number of gears: reverse: | 10 2 |
| Additional gearbox | TATRA 2.30 TRK 1.6/2.6 reduction, two-stage |
| Power take-off | TATRA 1TP120, from gearbox, without pump |
| Front axle: | Steered, driven, with swinging axle shafts, with drum brakes, plug-in drive, axle differential with lock. Suspension on air springs with telescopic shock absorbers, torsion bar. |
| Rear axles: | Driven, with swing axle shafts, with drum brakes, axle differentials with locks, center differential with lock. Suspension on leaf springs. |
| Steering | |
| Steering wheel: Controls: | left monoblock type ZF |
| Brakes | |
| Four mutually independent braking systems: | service brake with ABS, emergency brake, parking brake, retarder |
| Tires: Wheels: | 14.00R20 20-10.00V |
| Car cabin | Cabover, middle – 2-door, folding: — driver’s seat with longitudinal and vertical adjustments with a 3-point seat belt, — with a passenger seat without adjustments with a 3-point seat belt, - with oil heating, — with rear-view mirrors with electrical heating and adjustments. |
| Fuel tank | 220 l+ 67 l ADBlue |
| Dimensions | |
| Width: Front track: Rear track Ground clearance | 2,550 mm 2,074 mm 2,074 mm 360±20 mm |
| Masses | |
| Curb weight: Front axle load: rear axle load: Max. gross vehicle weight: Load capacity: Max. add. front axle load: Max. add. rear axle load: | 10,200 kg 6,200 kg 2 x 2,000 kg 26,000 kg 15,800 kg 8,000 kg 2 x 9,000 kg |
| Electrical equipment | |
| On-board voltage: Battery: Alternator: | 24 V 2x12V 180 Ah 28 V/80 A |
| Driving properties | |
| Max. climbability with a total weight of 26,000 kg: Max. speed (with limiter): Turning diameter of the vehicle along the outer wheel track: | 84% 100 km/h 18.5±1.0 m |
www.martimex.ru
Tatra 815-2 UDS 114 TATRA 815-2 UDS 114
On this page you could buy a leveling excavator TATRA 815-2 UDS 114, manufactured in 1999, operating time m/h 10906, for RUB 2,120,000Attention! The announcement has lost its relevance.Deleted: Nov 17, 2017 RUB 2,120,000 | |
| Model: | 815-2 UDS 114 |
| Year of issue: | 1999 |
| Mileage: | 10906 km |
| Price: | RUB 2,120,000 |
| Description: | ID 32708Model 815-2 UDS 114Color YellowYear of manufacture 1999Mileage km. 10906 HP 340 Engine capacity 13744 Gearbox Mechanical Cabin type 2-seater Body type Excavator-planner Brake type Drum Detailed information The excavator-planner UDS-114 is a hydraulic universal finishing machine mounted on the chassis of a TATRA-815-2 vehicle. Designed for all types of excavation work during repair work on water pipelines, oil pipelines and gas pipelines, as well as for special planning of slopes along highways. The main bucket has a volume of 0.63 cubic meters. m, you can loosen and lift soil of classes 2, 3 and 4, and with the help of additional replaceable equipment, work with soil of class 5 with a volumetric weight of up to 1800 kg/cu. m. The excavator has the ability to process horizontal walls; the maximum angle of inclination of the arm is 90 degrees. The Uds 114 excavator is equipped with a comfortable operator’s cabin of the excavator installation with dependent water heating and a two-speed fan; in addition, there is a hatch in the cabin ceiling for cabin ventilation in the warm season. Make and model: Tatra 815-2 UDS 114 ID: 2708 Body type: leveling excavator Year of manufacture: 1999 Color: yellow Operating hours: 2863 Mileage (km): 10906 Engine capacity (cm3): 13744 Engine type: diesel Engine power (l /s): 340 Overall dimensions: 8840/2500/4000 Operating weight (kg): 21800 Technical characteristics of the excavator Bucket capacity (m3): 0.63 Excavation classes: 2,3,4 Max. digging force (kN): 85 Digging height (m): 7.7 Digging depth (m): 6.6 Digging radius (m): 10.5 Productivity (m3/h): 108 Duration of tilting the working body towards/away yourself (s): 3.5/3 Boom raising/lowering time (s): 6/7 Turning time work. or-at 360 degrees. (s): 3 Working platform rotation speed (rpm): 8 Swivel head rotation speed (rpm): 20 Hydraulic system Working pressure (MPa): 8-16 Control circuit pressure (MPa): 3 Hydraulic fluid tank (l): 150 Fluid volume in the system (l): 500 Chassis Wheel formula: 6x6 Suspension type: spring Brake type: drum Tire size: 12.00 R20 Spare wheel mount: yes Box: yes Additional description: Control of the excavator operating functions is hydraulic, combined with electrohydraulic, all working operations of the excavator are performed using joysticks from the operator’s cabin (on the armrests of the operator’s seat), which significantly facilitates the operator’s work and increases the accuracy of working operations. Extension of supports from the operator's cab. |
| Location: | Russia / Moscow region / Dzerzhinsky |
Photos
Selling Excavator-planners UDS-114 (UDS-214) location Delivery to any city in Russia.
Excavator-planners UDS-114 (UDS-214) from RUB 10,500,000. The TRADE STROY company sells from the factory excavator units on the KAMAZ 53228 65111 6x6, MAN TGA 6x6, TATRA 6x6, KRAZ 6x6 chassis. All information can be obtained by phone or on our website. New excavator-leveler UDS 114 on the TATRA T815-221R21 chassis. Manufacturer: CSM Tisovec (Slovakia). Warranty 12 months or 1,500 m/h. Operating weight of UDS-114: 22310 kg. Bucket volume UDS-114: 0.6 m3. Horizontal reach of UDS-114: 10.5 m. Depth range of action of UDS-114 (0°, -90°): 7 m. Depth range of action (+30°, -60°): 5.7 m. Height of discharge of UDS -114: 5.5 m. Height reach UDS-114: 7 m. Superstructure engine UDS-114: John Deer. Hydraulic equipment UDS-114: REXROTH. Leasing. Credit. Delivery is available throughout Russia and the CIS. • EXCAVATOR-PLANDER UDS 114 (MAN) • EXCAVATOR-PLANDER UDS 214 (TATRA) • EXCAVATOR-PLANDER UDS 114 (KAMAZ) • EXCAVATOR-PLANDER UDS 114 (TATRA) • EXCAVATOR-PLANDER UDS 114 (KRAZ) We are also ready to offer other excavators - levelers: Excavator-leveler TEP-18 on the KAMAZ-65111 chassis (6x6, bucket 0.65 m3, digging radius 10 m, depth 6.3 m) Excavator-leveller EO-43212 on the KAMAZ-53228 chassis (bucket 0 , 5 cubic meters, digging radius 9 m, depth 5.8 m) Excavator-leveler ET-4322 on KAMAZ-43118 chassis (bucket 0.63-0.75 cubic meters, digging radius 11.3 m, depth -6.9 m) Excavator-leveler EW-25M1. 103 on the KAMAZ-65111 chassis (0.63 cubic meters, pump unit "Pneumostroymashina" (Russia) Excavator-planner EW-25M1. 104 on the KAMAZ-43118 chassis (0.63 cubic meters, pump. installation "Pneumostroymashina" (Russia) Excavator-leveler EW-25M1. 103 on the KAMAZ-65111 chassis (0.63 m3, "Linde" (Germany) Excavator EW-25M1. 104 KAMAZ-43118 (0.63 cubic meters. , pumping unit "Linde" (Germany) Planer EW-25M1. 103 on the KAMAZ-65111 chassis (0.63 cubic meters. installation "Bosch-Rexroth" Excavator EW-25M1. 104 on the KAMAZ-43118 chassis (0. 63 cubic meters of installation "Bosch-Rexroth" Excavator-leveler EA-17K on the KAMAZ-43118 chassis (6x6, bucket 0.65m3, digging radius 6.8 m, depth 4.0 m) UDS-114 - Tatra UDS-114-MAN UDS-114 KRAZ-63221
| Name: | Sales department - Other announcements Company TRADE STORY |
| Organization: | Company TRADE STORY |
| Price: | 10,500,000 rubles |
| Car model: | Excavator-planners UDS-114 (UDS-214) from RUB 10,500,000. The TRADE STROY company sells from the factory excavator units on the KAMAZ 53228 65111 6x6, MAN TGA 6x6, TATRA 6x6, KRAZ 6x6 chassis. All information can be obtained by phone or on our website |
| Model: | Excavator-planners UDS-114 (UDS-214) from RUB 10,500,000. The TRADE STROY company sells from the factory excavator units on the KAMAZ 53228 65111 6x6, MAN TGA 6x6, TATRA 6x6, KRAZ 6x6 chassis. All information can be obtained by phone or on our website |
| Year of issue: | 2015 |
| Color: | At the request of the customer |
| Mileage: | No mileage |
| Engine capacity: | Depending on the configuration |
| City: | Moscow |
| A country: | Russia |
| Address: | Delivery to any city in Russia. |
| Category: | Selling |
| Added: | 23-01-2022 14:47 |
