Reliable forklifts from the world famous German company Linde

Most companies produce forklifts based on publicly available designs. However, there are also manufacturers who are often pioneers in the technologies used to build their equipment. One of such companies can be considered Linde, which not only develops the latest technologies itself, but also produces specific loaders for various applications.

Purpose

The equipment is used for warehouse work. The main functions are unloading and loading materials. The presence of forks ensures the capture and movement of various types of loads. Basically, these models are widely used in the dismantling of palletized cargo. Areas of use:

• Foundry;
• extremely dusty production;
• beverage factories;
• paper industry;
• construction;
• Agriculture.

The Linda forklift can handle indoor and outdoor work. By equipping the equipment with special devices, you can expand the possibilities of use. By attaching a snow blower, you can clear the warehouse area of ​​snow. It is also possible to install a bucket, which makes it possible to get a small excavator.

Linde HT18 Ds loader

Electrical

There are 6 series of loaders to choose from, which differ in power, as well as in the technologies used in their production. The series starts with small loaders that are capable of lifting loads weighing up to 1 ton, and the operator works in them while standing. They end on the largest units, which have a load capacity of up to 8 tons.

Photo of Linde E16P electric forklift

Due to the use of electric drives and controllers, loaders of this type have a lot of advantages: smooth speed control and direction changes, compact dimensions, low noise levels and the absence of harmful emissions. Thanks to this, the loaders can be used in enclosed spaces with any type of cargo.

Specifications and Features

Technical characteristics of Linda forklifts:

Specifications

Technical indicators depend on the type of loader. There are fork models with electric drive. Their technical characteristics ensure quiet operation in enclosed spaces. The diesel type of forklifts operates on a diesel unit.

Gas forklifts use gas as fuel. They are used in warehouses with poor ventilation. There is also a variety of heavy diesel forklifts. They are designed for storing heavy loads. There is a specific type of Linde loader called side loader. They run on diesel fuel. Unloading and loading are carried out using side forks. There is also one modification of diesel heavy models, called container loaders.

Linde H16T-01 loader

Engine characteristics

Electric models are equipped with an electric drive and controllers. The smallest E 10 loader does not have such a powerful engine. For the remaining series of electric models, a powerful unit and customizable electronics are installed.

Engines of diesel and gas modifications of the EVO standard are manufactured using current methods that ensure lower emissions.

The power units of the side and heavy series are similar to the diesel versions. There are only differences in the amount of kilowatts. The motor power values ​​for all modifications are presented in the table.

Linde H30D loader

Cabin

Light-duty models have a smaller cabin than models designed for storing larger loads. The operator on small models controls the process while standing. On the E10 model, the operator has a wide view. The control levers are at a comfortable level.

In the electric version 12-20 L, the cabin is equipped with an adjustable seat. It has joysticks for control. There are also mounts for tablet devices and bottles in the cabin. The remaining series are similar to this series, except for the 60-80 modifications, which have a reinforced closed cabin.

The cabin of diesel and gas forklifts is built from a strong frame. Inside, the ergonomics are car-like.

Heavy diesel series are characterized by the presence of a large, roomy cabin. In these models, it is isolated from the chassis, which reduces vibration effects.

Side loaders are equipped with a cabin similar to that of the diesel series.

For container series, the cabin is located on the platform. This arrangement has a positive effect on visibility during operation.

Fuel consumption

Diesel models consume about 2.4 l/hour. The consumption of gas modifications for series with the EVO standard is an average of 2.5 l/hour. For other gas forklifts – 3.9-4.4 l/hour.

Linde H40D

Explosion-proof

These loaders have exactly the same capabilities and characteristics as the basic models. However, the main elements are isolated from external influences, which should prevent the occurrence of a spark. The loaders have been tested and comply with European directives ATEX 94/9 EC (EN 1755, EN 1834). These are international rules that apply to equipment operating in hazardous areas.

Peculiarities

The instrument panel, as well as all lighting fixtures, are designed to be sealed to avoid external influences. The engines have been replaced with others that are completely sealed. Their elements do not allow sparks to occur from outside. But the transmission and brakes, thanks to the use of hydraulics, do not require replacement and are used as standard.

The following components have been modified:

• A heat exchanger that should cool the exhaust gases;
• The generator and starter are explosion-proof;
• Strict temperature control of oil, exhaust gases, coolant. If their heating reaches a critical point, the system automatically turns off;
• Flame catcher and spark absorber, which are located in the exhaust pipe;

The electrical system is completely isolated and all elements of electric forklifts are completely protected from the release of sparks into the environment.

• A flame extinguisher is installed in the intake manifold.

Specifications

The video shows the capabilities of the Linde forklift:

Device

Electric models are powered by a battery drive. Can perform various unloading and loading activities on hard surfaces indoors and outdoors.

For diesel models, the hydraulic support cylinders are mounted on the cab. The transmission of these models is mainly of our own making. Transmission is hydrostatic type. Power is transmitted without the participation of a gearbox. Modifications of this type also have power steering. The brake discs of diesel forklifts are located in the oil pan. This arrangement increases strength and eliminates the need for repairs.

The design of gas models is similar to diesel varieties.

Heavy diesel modifications are characterized by the presence of a durable structure that provides greater load capacity. Otherwise, these modifications are similar to diesel devices.

Linde side loaders are distinguished by the shape of their lift. It contains a fork with a boom and a platform. Warehousing and movement of goods is carried out in two steps. First, the materials are grabbed using a fork and moved to the platform. Then the captured materials are transported. This ensures durability and safety.

Container models are characterized by a similar design to diesel heavy ones. There is a device for gripping - a sophisticated fork device that expands to move long loads.

Detailed information about the structure and engine of Linda's loader will be provided by the official website.

Linde H40D loader

Linde forklifts

The production of forklifts is carried out by the German company Linde, which occupies a leading position in the world in the production of warehouse equipment. Production facilities are located in Germany, England, France, China, as well as the USA; for the latter country, loaders are developed separately. The company was founded in 1904 and is one of the oldest in the world.

The main advantage of the manufacturer is the production of many types of warehouse equipment that can satisfy any needs, while most manufacturers stop at a small number of types of warehouse loaders.

The company has managed to significantly develop its influence in Russia, thus, sales offices and service centers are located throughout the territory, which greatly simplifies the purchase and further maintenance. There are about 18 such points.

Among the loaders you can find the usual forklifts with electric drive, gas or diesel power unit. Quite specific heavy diesel forklifts are also produced that can lift loads to great heights and cope not only with large weights, but also with the difficulty of hooking a particular object. There are also side loaders designed for transporting long loads. And for work in hazardous areas, a special series is used, all components of which are completely isolated from external influences.

Advantages of Linde loaders:

• A huge selection of various equipment, which really differ from each other and have different tasks;
• Much attention is paid to the efficiency of forklifts, as well as their environmental friendliness. Noise and emissions levels comply with all European regulations, and approximately 90% of all materials on the forklift can be recycled;
• Working units are capable of providing greater power, smoother operation, as well as easy and precise control;
• All loaders have additional boom stabilization, which provides excellent stability and the ability to lift loads to greater heights;
• A huge number of dealer and service centers, which will allow you to quickly buy equipment or components, as well as carry out timely maintenance.

Advantages and disadvantages

The Linde forklift has many positive differences when compared with similar equipment. Benefits include:

• a variety of models that differ from each other;
• obvious efficiency in operation;
• environmental friendliness of technology;
• high power;
• ease and precision of control;
• smoothness of movements;
• the presence of additional stabilization of the boom mechanism provides good stability;
• maintenance services are located in almost all cities.

The disadvantages of the technology include the cost, which is higher than the cost of other devices in the segment.