TOP-3 representatives of the MaxCut brand chainsaw model range

Specifications

A special feature of the MaxCut MC 146 chainsaw is easy access to adjustment units and mechanisms. Also available for free sale is a wide range of spare parts, repair kits and consumables for this model. All together makes it possible to repair and maintain this chainsaw by the owners themselves.

• weight is greater than most analogues - 6 kg.
• dimensions 41x26x30 cm.
• cylinder volume 45 cc.
• power at maximum speed up to 2.9 hp. or 2.2 kW.
• gas tank volume 0.55 l.
• runs on gasoline with an octane rating of at least 92 (AI 92).
• oil tank volume 0.26 l.
• tire length 40 cm.
• When sold, the saw comes with a 1-year warranty.
• The service life declared by the manufacturer is 5 years.

During operation, the engine maintains stable speed in all modes, from idle to maximum. The engine life is increased due to the use of high-quality materials for the crankshaft and honing of the cylinder working surface.

The chain is lubricated and simultaneously cooled with oil automatically during operation. Oil is supplied from the tank to the lubrication point using a pump with a controlled flow - the higher the speed and load on the chain, the more oil the pump pumps.

For safety reasons, MaxCut MC 146 is equipped with an emergency brake and a chain catcher in case of a slip or break.

Possibilities

• Power: 2500 W.
• Idle speed: 3000 rpm.
• Tire length : 18 inches (45 cm).

The two-stroke engine of this universal model runs on a mixture of gasoline and oil and develops a power of 2500 W (3.4 hp). Equipped with a 45 cm guide bar, the Maxcut MC 152 chainsaw requires the use of a saw chain with 72 teeth. The chain tension is adjusted using a socket wrench.

The Easy Start system is responsible for a comfortable start - it reduces the force on the starter by 60% compared to chainsaws of the same category.

Advantages:

• Easy Start starting system - reduced up to 60% effort when starting the saw.
• The toothed stop ensures comfort and safety when working with a chainsaw.
• Easy access to filter and spark plug.
• Anti-vibration system.
• Automatic chain lubrication.
• Inertial chain brake.
• Oil supply is adjustable.

Bar and chain

The MaxCut MC 146 chainsaw is sold with a 40 cm long bar and a chain for it. Chain pitch 0.325 inches. Chain thickness (bar groove) 1.5 mm. This is one of the common (interchangeable) standards for chainsaws, even from different manufacturers. If desired, to work with small-sized wood, for convenience, you can separately buy and install a shorter bar and a high-quality chain.

Model features

The MAXCUT MC 152 chainsaw has its own characteristic features. It differs from models in its class by an enlarged cylinder made of nickel. To protect against corrosion and high temperatures, its inner surface is coated with a thick layer of chrome alloy.

The saw set of this signature MaxCut model consists of a high-quality bar on which a forged chain is installed. The reinforced design of the organs allows them to withstand high loads without the risk of deformation or the formation of external defects.

Advantages and disadvantages

Pros of the MaxCut MC 146 chainsaw:

1. It is several times cheaper than some of the most expensive models of the same class.
2. MaxCut MC 146 performs its function well, that is, sawing.
3. Easy starter.
4. Steady speed.
5. Maintainability.

The disadvantages of MaxCut MC 146 are common to the most inexpensive Chinese-assembled products. Moreover, sometimes completely unexpected and trivial ones - the starter cord is broken, the oil tank is leaking. The cord is changed, the tank is sealed by changing gaskets or sealant. But questions about the build quality and strange savings on small things remain.

There are more serious complaints - the thread on the tire mounting bolt quickly breaks off.

Perhaps all these annoying little things have already been taken into account and corrected by the manufacturer, and in the new batch of chainsaws there are no such misunderstandings. Perhaps they remain or new and unexpected ones will appear.

But over time, everything is improved and refined. There is an improved modification of the chainsaw. It is marked with the prefix Shark (MaxCut MC 146 Shark).

It has significantly improved the saw unit, the quality of the chain, and other shortcomings have been taken into account. But this is a slightly different modification of the saw. And it costs a little more.

User manual

Before starting work, be sure to carefully read the operating instructions. Even experienced owners whose MaxCut MC 146 is not their first chainsaw need to study all the recommendations. MaxCut MC 146 has its own characteristics. For example, gasoline and oil for it are diluted not in a ratio of 1:40 or 1:50, as recommended for many other models, but in a ratio of 1:32.

MaxCut MC 146 is particularly demanding on the quality and sharpness of the saw chain. The instructions also contain a lot of really useful tips for practical work.

What is important is that the MaxCut MC 146 instructions are presented in simple and understandable Russian. This doesn't always happen. Sometimes such documents look like completely incomprehensible machine translations from English-Chinese into Russian.

A large section of the instructions is devoted to safety precautions.

There are sections on assembly, maintenance, selection and sharpening of chains, repairs, and storage.

You can read the complete instructions for MaxCut MC 146 by downloading them from our instructions catalogue.

As a result, in terms of price-quality ratio, MaxCut MC 146 looks adequate. It also looks good in terms of price-performance ratio.

That is, it cuts, which is what is required of any chainsaw.

The following video is devoted to how the MaxCut MC 146 chainsaw works and how it cuts. One of the saw owners also shares his impressions:

Characteristics of popular models

Popular models include:

• 146;
• 152;
• 252;
• 246.

MC 146

Technical characteristics of the MC 146 Shark model:

Modification indicators 146-22100146:

The MaxCut MC device package includes:

• saw;
• guide type tire;
• casing;
• saw chain;
• tools required for assembly;
• User instructions in Russian.

MC 152

Technical parameters of the MS 152 model:

This model is used for working with lumber on a construction site, for collecting firewood and for caring for trees and small shrubs.

MC 252

Technical parameters of the saw MaxCut MC 252:

The tool is used for felling trees whose diameter does not exceed 0.4 m. An engine with an increased service life and a balanced design ensure accurate cutting of the material. The automatic lubrication system prevents the device from overheating and protects parts from premature wear.

Other models

Parameters and technical indicators of the MC 246 model:

The tool is equipped with a chain link lubrication system that helps protect them from premature corrosion and wear. There is also a device that regulates the supply of oil to the chain depending on operating conditions and the type of material being processed.

Reviews

I don't have a lot of work to do with an expensive saw. It is necessary to cut some firewood several times a year for barbecues and for a bathhouse. Why do I need a chainsaw for 20 thousand? I paid less than 4 thousand, I’ve been using it for a year now until it breaks. Maybe I just didn't have time. On the other hand, expensive chainsaws also break. And for twenty I can buy 5 of these. Starts up easily. After a long period of inactivity, the starter pulled three times and it started running. The engine runs smoothly and does not stall. So far I'm happy. If it breaks, I’ll fix it, I love working with mechanisms.

Sergey Ivanovich

The MaxCut MC 146 chainsaw itself is good. Everyone is spoiled by these petty imperfections. The starter cord return sometimes gets stuck. When I bought it, I started tensioning the chain. One tooth is turned to the side. Manufacturing defects. I corrected it, tried it, but it didn’t cut well. New, but saws like a dull one. I didn’t bother racking my brains, I bought a chain from Oregon. I went to work, as if I had a completely different chainsaw in my hands. And she gets the load from me. And tires and chains are changed from time to time on expensive saws.

Vitaly

To summarize, it is worth noting that the MaxCut MC 146 chainsaw, thanks to its good characteristics and low price, will become an indispensable assistant when performing tasks of medium complexity. The main thing is to consider the frequency of use of the tool; if not often, then it will last a long time. For large volumes of work, it is still worth choosing more reliable chainsaws from famous brands.