KADVI "OKA" and "UGRA" walk-behind tractors and cultivators are compact, lightweight and mobile units that allow you to reduce the cost of effort and time, while at the same time increasing the efficiency of soil cultivation. With the help of these walk-behind tractors, you can carry out a wide range of both agricultural and utility work. Also, their undoubted advantages include reliability and durability, ease of use and routine maintenance, extraordinary functionality, which is achieved through the use of a wide range of attachments. The attachment for OKA and UGRA walk-behind tractors is presented quite widely; in addition, it is affordable and allows you to completely replace hand tools.
Attachments for Ugra walk-behind tractors
Kaluzhsky offers its customers not only walk-behind tractors and cultivators, but also attachments.
Without these auxiliary tools, it is difficult to imagine manual cultivation of large areas of land. Motoblock Ugra NMB-1N7 Motoblock Ugra NMB-1N7 Motoblock Ugra NMB-1N7
In this review, we will dwell in more detail on each type of attachment for Ugra walk-behind tractors and their modifications. You will become familiar with the characteristics, type and installation process of some additional devices that make the farmer’s work easier and make working with the walk-behind tractor more functional.
Mowers
- The Zarya mower for the Ugra walk-behind tractor is a device whose main purpose is to mow grass in pastures, garden plots, vegetable gardens and lawns. The lateral tilt of this unit should not exceed 8 degrees. The steepness of the slope is no more than 20 degrees. Also, this mower can remove grain crops and single, thin bushes with thin branches. During mowing, the grass is arranged in a row thanks to the appropriate arrangement of the blades.
Mower "Zarya"
Mower - The Zarya-1 mower is an adapted, updated version of the Zarya mower, used for connection to all Ugra walk-behind tractors. Can be combined with other series of walk-behind tractors from Kadvi. The unit is driven from the power take-off shaft.
Single axle trolley
Universal trolley-trailer PMG300-1. The maximum load capacity of this equipment is 350 kg, the overall dimensions of the internal housing are 1200 x 1600 x 340 mm.
The trolley can be used to transport goods over short to moderate distances. Adapted for attachment to walk-behind tractors and movement at speeds up to 9 km/h.
Universal trolley-trailer PMG300-1
Potato planter
The potato planter is designed for embedding potato tubers into the soil. When planting, a mound of soil is formed over a row of potatoes. The productivity of this equipment is up to 0.25 hectares per hour.
Potato planter
The weight of this unit does not exceed 34 kg, the nominal capacity of the tuber hopper is 33 liters. When planting, the planter allows you to adjust the distance between potato tubers: from 30 to 50 cm.
Potato digger
Potato digger
The rumble digger for potatoes and other root crops is combined not only with the Ugra walk-behind tractor, but also with other types of heavy walk-behind tractors from Kadvi.
The factory version is the simplest type of equipment, without additional functions. Attached to the walk-behind tractor using a holder and bolts. Allows you to dive into the soil to a depth of 20 cm, captures a strip of land measuring 38 cm.
Milling cutter - cultivator: learning the assembly rules
One of the most useful types of attachments. Using milling cutters, you can easily loosen, grind the soil, and also mix fertilizers with the soil.
The milling cutters are placed on the output shaft and grip the soil to a depth of 18 to 20 cm. The gripping track width is 10.5 cm. The diameter of the factory cutters is 34 cm. The weight of the equipment is 17.2 kg.
The figure below shows a diagram of the installation of cutters on the Ugra walk-behind tractor.
Installation diagram of cutters on the Ugra walk-behind tractor
Lugs
Factory lugs from the Kaluga manufacturer are available in two variations:
- with hexagonal bushing;
- with a cylindrical bushing.
Universal lugs
A lug with a hex bushing gives the walk-behind tractor greater grip on the ground and increases traction. Used for plowing and hilling. Cylindrical - a classic option for attaching a lug to a walk-behind tractor.
Both types of lugs have a mass of no more than 18.8 kg; depending on the modification of the equipment, their diameter can range from 35 to 50 cm.
Weighting weights
Factory weights weigh from 10 to 17 kg. The main task of this attachment is to give the walk-behind tractor greater stability and facilitate the operator’s work on soils that require long-term cultivation.
Weighting weights Weighting weights
Plow
The PM-1 plow from Kadvi is suitable for both Ugra and Oka walk-behind tractors of all modifications. This device helps to add fertilizers to the soil, performs plowing and loosening.
Plow "Mole" Plow Standard with hitch Standard plow PM-1
The standard model of the PM-1 plow weighs 7.8 kg, covers a layer of soil 21.5 cm wide, and has dimensions of 535x310x410 mm. The plow is attached to the walk-behind tractor using a hitch, holder and bolts.
Raspashnik (hiller)
Hiller
The factory tiller RM-1 can be combined with any modifications of the Ugra and other series of walk-behind tractors from Kadvi. It is recommended to use a tiller for creating furrows in the soil, weeding beds, and hilling.
When assembled, the dimensions of the hiller are 540 x 170 x 445 mm. The weight of the part is 4.5 kg, the width of the ground that can be covered is up to 40.2 cm.
Harrow
Harrow
Useful attachments, the main function of which is to level the earthen layer after plowing or cultivation. Harrowing is also carried out after cleaning the area.
The width available for processing when passing the harrow is 80-90 cm, the weight of the implement is 12 kg.
Hitch
Hitch SUM-1
SUM-1 coupling device for all Ugra walk-behind tractors. Main function: attaching additional implements to mini-tractors and walk-behind tractors. Allows you to adjust the position of the implements before carrying out agrotechnical manipulations.
The dimensions of the hitch produced by the Kaluga Motor Plant are 435 x 130 x 175 mm, weight 5.2 kg.
snow blower
Mounted snow blower for walk-behind tractors "Ugra", SUN.1 - a device for clearing areas of land from snow. Allows you to create a smooth walking path on a snow layer. The drive is carried out through a V-belt transmission from an angular gearbox.
The factory product warranty is 1 year.
Weight of the snow blower, according to the operating instructions: 47 kg. Dimensions 515 mm/670 mm/860 mm. The strip of captured snow is up to 60 cm, the height of the snow cover that can be moved by a snow blower is from 5 to 25 cm. The maximum snow throwing range is from 5 to 8 meters.
Rotary snow blower Blade shovel Utility brush
Motoblock brush
Motoblock brush ShchM-0.9 is a tool for cleaning areas. Can be used both for clearing leaves and clearing snow. Product warranty is 1 year.
The captured cleaning strip is 90 cm. The maximum speed of the walk-behind tractor when coupled with such a brush is from 2 to 5 km/h.
Driven by V-belt transmission from the engine. Can be rotated 18 degrees. Intended for domestic use. The weight of the product is 45 kg, dimensions are 700x1000x760 mm.
Motoblock shovel
A more powerful option for removing snow, can be used instead of a brush. It is lightweight and compact. Dimensions 1000 x 280 x 370 mm, shovel weight - 13 kg.
Motoblock all-wheel drive adapter AMPK-500
Can be connected to all heavy walk-behind tractors, not only the Ugra walk-behind tractor. For operator convenience, it is equipped with a brake belt system, a wide seat, a removable body, and a mechanism for attaching additional equipment.
The dimensions of the adapter are 2550*1350*1140 mm, the weight does not exceed 240 kg, up to 100 kg can be transported in the body, and up to 300 kg in the trolley. The total weight of the transported cargo should not exceed 500 kg.
Adapter AMPK-500
Earth drill
An earth drill is designed for mechanized excavation of soil and drilling holes of various depths. This equipment is mounted on the back of the walk-behind tractor using a three-point mechanism. The drill operates from the power take-off shaft.
Earth drill
In the photo below you can see what an earth drill for a mini tractor looks like. You can find similar equipment in your city by searching on the Internet. The average cost of a mounted drill for a mini tractor or heavy walk-behind tractor starts from 22 thousand hryvnia (50-60 thousand rubles).
Riding module
The EMK riding module developed by JSC CADVI is designed to work together with the Oka (MB-1) and Ugra (NMB-1N) walk-behind tractors. This is a multifunctional transformable device designed to work with mounted implements: mower, snow blower, hiller.
When performing work, the operator controls the walk-behind tractor while sitting on the EMK seat, which greatly facilitates work and allows you to perform a larger volume of work with less physical effort.
EMK driving module
Description
Starting the review of attachments for Ugra walk-behind tractors, I would like to note that this walk-behind tractor can be combined with both native Kadviev tools and canopies from other manufacturers. The “Ugra” series of walk-behind tractors, as well as an assortment of attachments for it, are produced by the domestic engine plant “Kaluga Engine” (“KaDvi”).
Motoblock Ugra NMB-1N7
Thanks to the efforts of the manufacturer, the functionality of the walk-behind tractor has increased several times; now, having this unit and the corresponding equipment, a farmer (summer resident, etc.) can completely mechanize all agricultural work on his plot.
Owner reviews
Nikolay, Kirov:
“I’ve been working with domestic walk-behind tractors for a long time. I’ve been using Ugra for 4 years and can describe it as a reliable heavyweight. For those who are used to working on a tractor, it will be difficult at first; the weight of the walk-behind tractor will make itself felt. Pros: easy control, wide functionality. It's rare to find walk-behind tractors that aren't overpriced and have such a range of skills. Getting the attachment is not a problem; it adheres well, not only with the original factory one, but also with other manufacturers. I most often use, of course, cutters and a plow. In winter, I remove snow with a homemade blade. I'm happy with everything"
Vladimir, Kazan:
“The original task for my walk-behind tractor was to do everything at once. And I found one, however, I had to choose immediately between the Neva and Ugra. While I settled on Ugra, I haven’t tested the other one yet. I am completely satisfied with the technical parameters. I bought almost everything for attachments, because... The plot is large, you don’t have to rush to do everything manually. A factory-made digger, in my opinion, is not very convenient; it only gets 80 percent of the harvest, and more can be done. But this is not a minus, but a feature, given its low price. In general, I am satisfied with the factory-made attachments from Kadvi; foreign manufacturers often inflate prices, but you can still buy from us for normal money.”
Where to buy spare parts?
You can purchase a reduced gearbox for a walk-behind tractor, steering wheel, engine parts, replacement wheels and much more in our store. The list of offers includes only high-quality spare parts from leading manufacturers. The products are certified, therefore they guarantee the normal operation of the equipment after its installation and long-term operation.
We have the largest selection of parts to repair breakdowns of modern walk-behind tractors. The prices are fair, which allows you to update your garden unit without major investments and continue its effective use.
Unfortunately, even the highest quality and most expensive equipment breaks down. The resource is not infinite. But if you carry out repairs correctly and make a competent replacement, you can restore good performance.
