The Husqvarna 240 chainsaw is produced by one of the world's most popular manufacturers with more than three hundred years of history - the production and trading company Husqvarna (Sweden). The company was founded in 1689, at that time the brand produced weapons for the Swedish army, which it did for more than 280 years. Since 1970, the following products began to roll off the plant assembly line:
- garden equipment;
- garden tools;
- construction equipment and tools.
Thanks to such changes, the company quickly gained popularity in the international market and firmly established itself there. Now the Husqvarna trademark is the owner of several well-known brands.
Husqvarna 240
Description
The Husqvarna 240 chainsaw is the optimal chainsaw model from a world-famous Swedish manufacturer. The unit is intended for performing household work, in particular for:
- firewood preparation;
- removing dried trees from the site;
- sawing large logs (diameter up to 40 cm);
- other economic work with wood.
Chainsaw Husqvarna 240
This model has high build quality, light weight, a simple starting system and clear instructions. The engine of the Husqvarna 240 chainsaw has a power of 1500 W, with a cylinder displacement of 38.2 cm3.
The model is environmentally friendly, since the chainsaw motor uses X-Torq® technology.
This technology is responsible for reducing the amount of harmful emissions; in addition, during operation, significant fuel savings occur.
Features of the Husqvarna 240 chain saw:
- Air Injection air cleaning system, which allows you to reduce saw wear due to load, as well as increase the intervals between the need to clean the fuel filter;
- engine with X-Torq® technology - with this technology the saw consumes less fuel during operation, and the amount of emissions is reduced and is within the current norm;
- The saw is easier to start thanks to the combined control of the throttle and engine stop;
- the presence of the LowVib® anti-vibration system makes the device even more comfortable for the owner, allowing you to relieve stress from your hands;
- The device is equipped with anti-vibration dampers that absorb vibration;
- there is a fuel pump;
- The Husqvarna 240 chainsaw is equipped with a chain brake, which is activated by inertia.
Chainsaw malfunctions
We suggest you familiarize yourself with the problems inherent in chainsaws of the Husqvarna brand.
The Husqvarna chainsaw does not start, or starts and immediately stalls under load. The reasons are as follows:
- ran out of fuel;
- low quality fuel mixture;
- the filter is clogged;
- the candle got wet, burned, smoked;
- problem with the ignition system;
- carburetor not adjusted;
- the cylinder piston is jammed;
- wear of the piston group.
Husqvarna 240 disassembled
The tool vibrates strongly during operation:
- fasteners have become loose;
- vibration damping elements have become loose;
- imbalance.
The consumption of the fuel mixture has increased sharply:
- The air filter is dirty and needs to be replaced.
The chain continues to rotate at idle:
- the carburetor is not adjusted;
- piston wear.
The saw becomes very hot during operation:
- The spark arrester has failed.
We invite you to watch the Husqvarna 240 chainsaw in action on video.
You can also read the instructions for the Husqvarna 240 chain saw.
Basic equipment
The basic package of the Husqvarna 240 chainsaw includes the following components:
- fuel pump and fuel tank;
- back and front handle;
- muffler;
- saw blade;
- saw chain, stop and chain catcher;
- universal key;
- manual;
- protective cover for the saw blade.
A complete list of components and working parts of the chainsaw is specified in the operating instructions. The production and assembly of this model were carried out by Svensk Maskinprovning AB (Sweden). The saw complies with EU requirements for household appliances in terms of noise level and technical indicators.
Cost of Husqvarna 240 chainsaw
The cost of the new model in Russia is from 11,990 rubles, depending on the store that sells the product. In Ukraine, such a saw can be bought at a price from 5,600 to 8,000 hryvnia; in the USA, the Husqvarna 240 model currently costs from 180 usd.
Operating instructions for Husqvarna 240 chainsaw
The manual is included with every Husqvarna chainsaw, regardless of the model. The document introduces the equipment owner to the tool, how to work with it, and teaches proper maintenance to extend its service life. We list the most important points of the instructions:
- The device of the Husqvarna 240 chain saw.
- Security measures.
- Performance characteristics.
- Completeness.
- Methods and techniques of operation.
- Preparing for work.
- Break-in period.
- Maintenance of the Husqvarna 240 chainsaw.
- Trouble.
Chainsaw Husqvarna 240 X-Torq
Equipment
Along with the chainsaw, the kit includes:
- tire;
- chain;
- oil in container.
A protective case can be purchased separately.
Technical characteristics of Husqvarna 240
Technical characteristics of the Husqvarna 240 chainsaw engine:
- motor output power 1500 W;
- cylinder volume 38.2 cm3;
- chainsaw engine speed at maximum power 9000 rpm;
- idle speed 3000 rpm;
- spark plug type - Champion RCJ7Y;
- gap between electrodes - 0.5 mm;
- ignition module gap - 0.3 mm;
- fixed flow oil pump;
- The maximum performance level of the chainsaw oil pump is 8 ml/minute.
Technical characteristics of the cutting device of the Husqvarna 240 chainsaw:
- saw blade length - 16 inches/40 cm;
- minimum tire length - 33 cm;
- maximum tire length 40 cm;
- chain type - H37
- average chain rotation speed - 16.3 m/s;
- maximum rotation speed - 21.7 m/s;
- narrow tire shank.
Other technical parameters of the husqvarna 240 chainsaw:
- The weight of the Husqvarna 240 chainsaw is 4.7 kg. without equipment for sawing;
- oil tank volume - 0.21 l;
- engine sound power during operation - 113 dB;
- the sound impact on the operator’s ears is 100 dB;
- handle vibration level - from 2.1 m/s to 2.7 m/s.
Maintenance of the Husqvarna chainsaw 240
To ensure a long service life of the chain saw, the owner of the equipment must regularly carry out maintenance work, which boils down to the following:
- refueling with fuel and oil;
- chain sharpening;
- cleaning the instrument from contamination;
- air filter maintenance;
- spark plug maintenance;
- carburetor adjustment;
- checking the condition of the brake system;
- cleaning oil channels;
- sprocket replacement;
- guide maintenance.
Chainsaw Husqvarna 240 X-Torq
New equipment owners ask the following questions:
- how to remove the carburetor from a Husqvarna 240 chainsaw;
- How to adjust the carburetor on a Husqvarna 240 chainsaw yourself.
Carburetor adjustment
After break-in, some chainsaw owners adjust the carburetor. It consists of several stages:
- Start the saw and turn the high and low speed adjustment screws until they stop. Unscrew it back 1.5 turns;
- Warm up the saw for about 10 minutes. Set the idle speed using the idle speed screw. With the correct settings, the chain will not move along the bar at idle;
- Check the saw for acceleration. When you press the accelerator, the speed should increase quickly.
We invite you to watch a video that shows how to disassemble and reassemble the Husqvarna 240 chain saw.
The following video shows how to adjust the carburetor of the Husqvarna 240 chainsaw with your own hands.
Features of use
The main features of the correct use of the Husqvarna 240 chainsaw:
- before starting work, make sure that the saw is assembled correctly;
- inspect the sawing apparatus, check its settings, adjust if necessary;
- prime the saw, check the lubrication of the saw unit and the saw sprocket, and then start;
- lubricants should be checked every time before starting the unit;
- starting a husqvarna 240 chainsaw with a cold engine is carried out with the chain brake on;
- before turning on, grab the saw handle with your left hand, pull the starter handle towards you with your right;
- then pull the starter cord until the ratchet engages and perform jerking movements until the engine starts;
- Do not wrap the starter cord around your hand!
- As soon as the engine starts running, press the start button halfway;
- after which the Husqvarna 240 engine should run for 30 seconds, then you can proceed to adjust the idle speed by pressing the throttle control;
- If the engine is warm, perform all the same starting procedures except lock the throttle.
Description of safe working techniques with the Husqvarna 240 chainsaw:
- During operation, the machine creates an electromagnetic field around itself, which may affect the operation of devices such as pacemakers, heart implants, consult a doctor before using such equipment;
- Perform any cutting work only in protective equipment - protect your face, hands and ears, it is recommended to wear gloves on your hands, use a protective mask for your eyes, and noise-cancelling headphones for your ears;
- sparks may fly off from the muffler, saw bar or chain during operation, so it is worth taking care to have fire extinguishing equipment within easy reach of the operator;
- The husqvarna 240 chainsaw chain must have sufficient tension; low tension threatens to wear out the blade;
- Do not start the chain saw without the bar, chain and protective caps.
If you are not sure that you can figure out the Husqvarna 240 chainsaw yourself, contact the seller to set up the unit, and also carefully read the operating instructions for this product.
Device, tool maintenance instructions
The two main parts of the Husqvarna 240 saw are the body part with the engine and gas tank, as well as an oil tank, and the saw blade, which provides the direct function of the product. The use of the chain saw must be strictly specialized, based on the instruction manual.
It is prohibited to cut non-wooden objects or use any parts of the structure for purposes other than their intended purpose - you cannot remove or disassemble components, or connect another cutting blade to the engine. Do not use cheap lubricants, this will reduce engine power and impair the overall function of the saw.
The key to long-term operation of Husqvarna 240 is timely maintenance and proper adjustment of the operation of all components of the structure.
Fuel and oil, lubricants for husqvarna 240
AI-92 gasoline is used as the main fuel for the efficient functioning of this model chainsaw. The manufacturer recommends using Husqvarna oil for air-cooled two-stroke engines. The recommended mixing ratio is 1:50 for Husqvarna oils (we have a 2% mixture at the output), and 1:33 for oils from other manufacturers belonging to the JASO FB/ISO EGB class (3% mixture).
A key feature of fuel preparation is that gasoline and oil are always mixed separately, before being poured into the tank. Prepare the mixture for one month's use. Do not store finished mixed fuel for more than 4 weeks as its quality will deteriorate. To lubricate the chain, use Husqvarna Anti-Adhesion Oil.
Chainsaw Husqvarna 240 X-Torq
Husqvarna 240 chainsaw operating time
The operating time of the Husqvarna 240 chainsaw on one fuel tank refill is 30-40 minutes, depending on the intensity of use and the frequency of turning the engine on and off.
Maintenance of the Husqvarna 240 chainsaw
Device maintenance can be divided into three categories:
- daily;
- weekly;
- monthly.
Daily maintenance of the Husqvarna 240 chainsaw should include the following operator manipulations:
- cleaning the external parts of the tool - the operator must remove all dirt and dust from the surface of the product immediately, without waiting for hardening;
- checking the smooth operation of the gas handle and locking handle;
- checking the condition of the chain brake;
- turning the saw blade over;
- monitoring the condition of the oiler;
- checking the degree of tightening of bolted connections.
Once a week the following is performed:
- checking the starter cord and chainsaw spring;
- vibration damper check;
- deburring the saw blade;
- cleaning the area under the carburetor;
- cleaning or replacing the air filter - it is necessary to remove carbon deposits and monitor the integrity of the filter.
Once a month you should:
- clean the spark plug (remove carbon deposits), adjust the gap;
- perform external cleaning of the carburetor;
- wash the fuel tank;
- empty and clean the oil tank;
- check all contacts.
The main malfunctions of this Husqvarna model and how to eliminate them
Malfunctions of the Husqvarna 240 chainsaw - table 1.
| Malfunction | Cause | Solution |
| 1. The Husqvarna 240 engine does not hold idle speed well, the saw loses power during operation and does not want to start | The problem is the spark plug or check the engine, carburetor and cylinder piston | Clean the spark plug from carbon deposits; if you need to adjust the gap, do so or replace the spark plug. To check the condition of the piston and engine, contact a service center. |
| 2. The tool vibrates too much. | Loosening of vibration damping elements and fastenings | Check the elements and fasten them securely. |
| 3. The Husqvarna 240 saw is difficult to start, the engine power drops right during the cut or the tool begins to stall | The air filter or carburetor is clogged with dust, dirt, or particles. | Disassemble the carburetor and clean the air filter regularly |
| 4. Saw overheating | Spark arrester problem | Remove and replace catcher |
| 5. Excessive fuel consumption | The air filter needs to be replaced (does not cope with its function due to excessive clogging) | Change the filter to a new one. |
| 6. The chain continues to rotate when the throttle is set to idle | There is a problem with the carburetor, possible imbalance, worn piston | Contact the service center for repairs or other manipulations. |
| 7. The saw does not turn on even with a full tank of fuel. | There has probably been severe wear on the piston group, the piston itself, the carburetor, rings and other components | Contact the service center for repairs or other manipulations. |
Preparing the chainsaw for work
Before putting into operation the tool must be properly prepared:
- The chainsaw is assembled into a single structure.
- The headset is mounted and the saw chain is tensioned.
- The saw is fueled with oil and a pre-prepared fuel mixture.
- The tool is launched. as described in the manual.
- The functionality of the braking system is immediately checked.
- Checking the supply of oil to the chain.
- The idle speed is adjusted.
The saw is started, all systems are engaged and working - all that remains is to break in the chainsaw. And the video will tell you how to start the Husqvarna 240 chainsaw correctly.
Run-in
The break-in period lasts about 10 hours. During this period, gas-powered tools are operated in a gentle mode, without increased loads. The purpose of break-in is to grind in all moving parts of the chainsaw. If you skip the break-in and immediately put maximum loads on the chainsaw, the likelihood of the piston jamming increases sharply, which can lead to engine failure.
How to properly prepare the fuel mixture
To prepare a flammable mixture, the manufacturer recommends taking:
- high-quality gasoline with an octane number of at least 90 and no more than 93;
- original Husqvarna engine oil for two-stroke power plants.
The ratio of gasoline to original two-stroke oil is 50/1 (this is about 2%), in the case of using motor oils from other manufacturers (JASO FB/ISO EGB class oil is allowed) the ratio will be about 3% - 33/1.
It is recommended to use original chain oil of special viscosity as a chain lubricant.
Advantages and disadvantages of the Husqvarna 240 model
Having analyzed numerous reviews about the Husqvarna 240 chainsaw model, we can draw a conclusion about which of its parameters and features most attract owners or, on the contrary, which they do not like.
The advantages of the model are:
- power;
- high quality cutting of any wood;
- high-quality assembly;
- light weight;
- comfortable handle;
- high-quality vibration damping system;
- good service.
The disadvantages include:
- noise during operation;
- not intended for professional use, only for household use.
Video review of the husqvarna 240
Video review of the work of the Husqvarna saw
Review of the Husqvarna saw from the owner
Cutting a large log using a Husqvarna 240 chainsaw
Design and scope of use
The use of the Husqvarna 240 chainsaw is not limited to standard functions for preparing firewood. With its help, you can easily clear a large area of bushes and old trees, form crowns of ornamental plants in the garden, and use it in construction for cutting boards. Sufficient power and length of the bar allow sawing wood both lengthwise and crosswise.
The classic design of the brand is combined in this model with high technical characteristics and ease of use. The Husqvarna 240 saw belongs to the household class, but its performance is not much different from professional tools. Manufacturers have provided this saw with such necessary functions as easy starting, double air purification, and vibration reduction. Ergonomic control levers and handles provide maximum operating comfort and reduce the load on the operator. The main components of the mechanism are located in such a way as to speed up and simplify access to them in case of repair.
If you follow the operating instructions and regularly carry out preventive inspections of the chainsaw, repairs can be avoided in most cases. But even in the event of a breakdown, the tool will not cause you significant inconvenience - original spare parts can be easily purchased and replaced. The detailed structure of the Husqvarna 240 chainsaw is shown in the diagram below:
Owner reviews
Valery, Otradnoe:
The file is gorgeous, I read the reviews and thought it would be a delight, but sometimes I come across negative opinions. Well, I’ll say that the unit is decent, and for those whose equipment breaks down, guys, don’t be offended, you need to read the instructions carefully, then repairs won’t be needed. Each company makes an instrument in its own way, Husqvarna has more than one feature, work, study, and everything will be great.
I’ve been using my 240th chainsaw for more than 4 years, I’m happy as an elephant! Super Swedish technology, what else do you need?
Reviews and prices
Sergey, 37 years old, Kaluga: “This is the third chainsaw, before that there were Chinese devices. Husqvarna has been operating for 4 years. During this period I changed the chain, no other problems arose. Easy maintenance and operation: fill in gasoline and oil, and the device is ready for use.”
Alexey, 35 years old, Ivanovo: “A good option for home use on a personal plot. There is enough power for harvesting firewood and caring for trees. After 3 years of use, I changed the chain. Once it was necessary to adjust the carburetor. I did everything according to the instructions, there were no problems.”
