Motoblock Texas (Texas): repair instructions, reviews, 601 TG, Lilli 532 TG, 534 TG, 572 B, 530 TG

The Texas walk-behind tractor is produced in Denmark and used all over the world. It is more convenient to treat a garden or vegetable plot with high-quality equipment for performing various tasks, which the Texas motor-cultivator does an excellent job of. It is easy to operate, store and repair.

The unit breaks down very rarely, but even if this happens, finding parts for a particular model will not be difficult. Attachments for hilling beds or harvesting are available in a wide range of agricultural equipment stores. Parts, lubricants and auxiliary tools for the Texas cultivator should be purchased from certified centers. You can repair equipment yourself or contact specialists.

Model range overview

Texas motor cultivators are distinguished by high productivity, high-quality assembly, and versatility. The brand produces Texas in several series with certain characteristics, among which users will be able to choose the most suitable option for their site.

Texas series of motor cultivators

Texas Mini – represented by the very lightweight Mini Tex 204R model.

El-Tex – light electric cultivators.

Texas Hobby is a popular, numerous series for processing medium-sized areas.

Texas LX - models designed for processing difficult soils in small areas.

Texas TX - agricultural implements are designed for cultivating virgin lands and heavy soils over large areas.

Texas Lilli are compact, lightweight machines with powerful engines.

Texas Futura - agricultural machines for processing heavy soils.

Texas Fusion is a heavy, productive agricultural machine for processing virgin soil in large areas in intensive mode.

We invite you to familiarize yourself with some of the most popular cultivator models.

Lightweight motor cultivator Texas Mini Tex 204R weighing 12 kg and power 1.1 hp. copes well with cultivation, weeding between rows, is convenient for working in greenhouses, greenhouses, and is suitable for people with little physical strength. The width of the strip processed by four cutters is 15-26 cm, the depth is 20 cm.

ES 300

In the mini series, consumers are also offered an electric hoe with a power of 0.3 kW for easy cultivation of soil 10 cm deep by 15 cm wide. A tool weighing 4.6 kg greatly facilitates manual labor when weeding and loosening small beds, flower beds, and greenhouses.

El-Tex

This group includes electric models with a power of 0.75-2.7 kW, which can be used to cultivate light soil with a working width of 28-45 cm to a depth of 26 cm. Agricultural machines, like the previous series, are distinguished by their low weight of 7.4- 32 kg, modest dimensions. The recommended range of work is flower beds, lawns, growing seedlings, loosening rows, weeding.

Hobby

This series is represented by several groups of cultivators with different markings in accordance with the type of engine installed: B - Briggs&Stratton, TGR, TG - Texas Powerline.

Motor cultivator Texas Hobby 380 TG

The unit has a power of 2.66 hp, cultivates soil 38 cm wide and 20 cm deep. Thanks to its light weight of 28 kg, women and pensioners can handle the work.

Motor cultivator Texas Hobby 500 TGR

A compact agricultural machine for a small summer cottage or greenhouse, equipped with a special control system for transport wheels. It has one speed, the cutters process up to 55 cm of soil to a depth of 33 cm in one pass.

Specifications

Motor cultivator Texas Hobby 600 BR

Thanks to its low weight of 46 kg, powerful 5.5 hp engine, gearbox with 1 forward/1 reverse speed, this cultivator with an increased service life is deservedly popular among summer residents and gardeners. Reduced noise level, accessible aggregation with additional devices, protective wings, ergonomic controls are the undoubted advantages of this model.

Specifications

LX Series

Cultivators of this series are designed for cultivating difficult soils in small and medium-sized areas. The units are equipped with chain gearboxes instead of worm gearboxes, which are installed on previous series. The cars now have reverse.

The presence of rear-wheel drive makes it possible to mount attachments. The engine power of the Texas LX 550TG motor-cultivator is 5 hp, weighs 53 kg, and processes a strip of 55 cm in one pass.

Motor cultivators of the Texas TX series

Machines in this series easily cultivate virgin and fallow soils in medium and large areas of up to 60 acres. With mounted implements they perform the entire range of agrotechnical work.

Texas TX 601

This classic multifunctional cultivator is produced in two versions: TX 601B and 601 TG. Equipped with a powerful chain gearbox, an economical engine, a special ergonomic arch for easy transportation, transport wheels, and can be easily assembled with a variety of attachments. Rear gear drive.

A number of Texas TX 602 cultivators are also produced, which differ from the 601 versions in the design of the steering wheel. TX 602 cultivators are equipped with adjustable handles in two planes that do not fold. The handles of the Texas TX 601 motor-cultivator can be conveniently folded in half.

Technical characteristics of the Texas TX 601 TG motor cultivator

Motor cultivators Texas Lilli series

Sufficiently powerful machines with an average weight are capable of cultivating soil with a large working width of 85 cm to a depth of up to 33 cm, and can be rationally aggregated with various additional implements. There are models 572 V, 530 TG, 532 TG, 534 TG on the market.

Motor cultivator Texas Lilli 532 TG

The unit is equipped with an economical, reliable engine with a service life of 4000 hours, a gearbox with 1/1 speeds, a chain reducer, protective shields, and pneumatic wheels. The cutters are reinforced, with a special angle of inclination.

Specifications

We invite you to familiarize yourself with the operation of the Texas 532 cultivator with the TG620 POWER LINE engine in a video review:

Lily 534 TG

This model is equipped with a more powerful 7 hp engine, has more weight, thanks to which it effectively performs all agricultural work on heavy soil.

Specifications

Motor cultivators Texas Futura series

Multifunctional units, approaching the characteristics and functionality of walk-behind tractors, are equipped with a gearbox with speeds of 1 forward/1 reverse and a chain gearbox. They can be operated at an intensive pace in difficult areas for a long time, and can be rationally aggregated with additional attachments.

Cultivator Futura 6003B

There are two models on the market - 6003B and 6003 TG, which have similar characteristics and soil processing parameters, differing only in the type of installed engine.

Specifications

Fusion Series

The units of this series are modern powerful heavy machines Texas Fusion 10 TGVario, 10BVario, weighing more than 90 kg, capable of working on heavy soils in intensive mode for a long time. Perfectly aggregated with various mounted implements.

Motor-cultivator Texas Fusion 10 TGVario

The machine's power is 5.2 hp, the soil processing parameters of this unit are impressive: adjustable working width 35/62/68/90 cm to a depth of 38 cm.

Specifications

Brief overview of the technical characteristics of Texas cultivators

Despite the name, which is reminiscent of the Wild West, the Texas cultivator is produced in Denmark by the company of the same name. The history of TEXAS Corporation began in 1960. At this time, production workshops began operating.

At first, TEXAS assembled units using templates from other manufacturers. The first model of its own production went on sale in 1966, and since then the company has occupied a certain segment of the agricultural equipment market.

Technical features

The instructions for using Texas cultivators include a wide range of tasks to be performed. The equipment is equipped with several types of attachments, which allows you to perform almost any work, from loosening the soil to clearing snow from paths.

All units are equipped with powerful engines, which, depending on the modification, are divided into electric and gasoline. It is worth noting that the power of the power plant is quite enough for cultivating hard soil or virgin soil.

All modifications on the market have reverse gear; this control scheme makes it much easier to control the equipment.

Texas cultivators have optimal balance. This was achieved by installing a lightweight frame. In addition, the power unit is located directly above the working equipment, this protects the cultivator from collapsing. The engines of all models are protected by a special casing.

The units also have disadvantages. Farmers report high noise levels during work. It is worth noting that when cultivating soft soil, the cultivator’s productivity drops noticeably.

The lineup

Texas cultivators are available in several modifications. A wide range of equipment allows you to choose the optimal model for agricultural work.

Hobby Series

Designed for work in small areas: flower beds, beds, row spacing. All models are equipped with worm-type gearboxes, which ensures high-quality loosening of the soil and crushing of plant residues.

The design allows you to perform work in enclosed spaces. The series includes 6 modifications: 380 TG, 400 B, 500 TG, 500 TGR, 500 B and 500 BR. Here are the average technical indicators of the Hobby series:

El-tex series

These are electric models that are designed for cultivating soil after pre-treatment. These cultivators are not recommended for plowing virgin soil or cultivating rocky soil.

The series includes 4 models: 750, 1000, 1300, 2000. The numerical index indicates the power of the unit. The weight of the equipment varies from 9 to 30 kilograms, with a processing depth of up to 20 centimeters.

LX Series

Has three modifications. This series is designed specifically for processing virgin lands, but is recommended for use in small areas.

Here the designers replaced the worm gearbox with a chain drive, which expanded the functionality of the equipment. In addition, this series uses adjustable coverage technology. These include: 550 TG, 550 B, 450 TG.

TX Series

Includes two modifications: 601 TG and 602 TG, equipped with gasoline engines. Features include a mechanical starter, adjustment of the depth and width of processing.

The structural weight of the equipment is 56-58 kilograms, with a processing width of 30-85 centimeters.

Attachments

The Texas model range of motor cultivators is distinguished by a large range of variations, which is reflected in the ability to connect additional devices to the units. Light agricultural machines of the Mini, Hobby, El-Tex series are capable of exclusively cultivating and loosening the soil. More productive cultivators can be easily assembled with attachments, perform the entire range of agricultural work, and transport loads.

Texas cultivators are equipped with attachments: plow, hiller, weeder, harrow, grousers, potato planters and potato diggers, adapter, trolley, weights, brushes, segment and rotary mowers, rakes.

Malfunctions

Texas cultivators have a sufficient margin of safety, but over time certain problems may arise that require prompt intervention.

Let's consider several possible problems that are typical during long-term operation of Texas cultivators:

• Problem with the gearbox. The gearbox of the Texas LX 500 cultivator can make quite noisy sounds during its operation, which is most often caused by a lack of oil in it. It is necessary to top up, or better yet, completely replace the oil.
• This noise may be a result of loose bolts and other fasteners, so you need to inspect and tighten all bolts and nuts until they are tight. By the way, quite often oil leaks from the gearbox, which is caused by improper installation or wear of the seals.

• Accordingly, it is necessary to replace the oil seal on the Texas cultivator, as well as replace all gaskets.
• Problems with the belt. This design detail generally refers to consumables, i.e. to those that fail quite often. This is quite understandable, because the drive belt takes on a fairly large load, as a result of which it wears out or breaks.
• Therefore, it is recommended to purchase a spare belt for the Texas cultivator in order to quickly replace it if necessary.
• The cultivator is buried. Many people are interested in why the Texas cultivator is buried? In general, this problem exists with many cultivators when working on fairly loose soils.

• For example, if you have a TX 501 or 502 model, you can slow down the gas a little by folding the wheels to the middle position, and then adjust the bipod.
• The carburetor adjustment of the Texas Hobby 370 cultivator is carried out on a warm engine. To begin with, we screw in the full and low throttle adjusting screws, then turn them out one and a half turns, after which we start the engine and warm it up for ten minutes.
• We set the engine control lever to the minimum speed position, while making sure that the engine does not stop. Using the throttle valve adjusting screw, we set the idle speed to normal so that the engine runs smoothly.
• Using the idle screw, we adjust the idle speed to maximum, and then use the throttle screw to adjust the idle speed. The last two manipulations must be repeated at least twice.
• Gearbox problems. In this case, the problem will be the same as in the case of the gearbox, i.e. insufficient oil level. Therefore, it is necessary to fill the oil for the Texas cultivator into the appropriate crankcase, or replace it with a new one.

Gearbox Do
-it-yourself repairs to the Texas 601 cultivator, as well as other models in this series, should only be carried out if a person is familiar with the structure of such units, as well as methods for troubleshooting basic problems.

Otherwise, you can not only fail, but completely break everything, after which there will be no choice but to purchase a new cultivator.

Owner reviews

Vladimir:

“I bought a Texas 532 motor-cultivator on sale. We decided to choose a well-known manufacturer rather than Chinese cars. And they were not mistaken. My neighbor has already taken his walk-behind tractor to the service center for repairs twice, and this is our third year without any problems. I have a plot of 48 acres, little by little I do everything that needs to be done with different attachments with a cultivator - plowing, weeding, hilling potatoes. I attached the cart and can carry 4-5 bags freely.

Advantages: The entire structure of the unit is perfectly balanced - the center of gravity is rationally shifted thanks to the aluminum frame. The cutters are conveniently located.

Texas Company

Russian consumers have long been aware of the Texas company, which presents its products all over the world.

The Danish company was founded in 1960 and since then the production of soil tillage units has been constantly improved and modernized.

The main direction was identified to identify a comprehensive solution for carrying out work on the improvement of garden and park areas.

One of the company's activities is the production of generators, engines and water pumps, which are popular among consumers.

Modern equipment used in production allows us to produce high-quality and reliable units, such as walk-behind tractors, cultivators, snow blowers, lawn mowers, etc.

Now the company has transferred part of its capacity to China, so the production of parts is carried out there. This significantly reduced the cost, but did not deteriorate the quality, since control remained thorough.

How to use?

The Texas technique is quite easy to use. Before starting the engine, you must carefully study the instructions. Do not use the machine in an area that is prohibited by the instructions. The area to be processed must be examined for the presence of foreign objects; under no circumstances should they fall under the cutters. The equipment requires regular inspection of its condition, adjustment of connections and tightening of bolts. Do not forget about changing the oil in the gearbox.

Walk-behind tractors should only be used during the day. Repair work must be carried out with the engine turned off and the machine parts stopped. Breakdowns of walk-behind tractors can occur for the following reasons:

• the treated area is littered with debris and stones;
• when working near trees;
• when parts fail.

In order to avoid unexpected breakdowns, it is worth taking preventive measures, as well as preparing the equipment for operation. To do this, the unit must run idle for some time, and then it should be tested on light soil. Another important measure is monitoring the presence of fuel in the tank. This procedure will eliminate rust and condensation.

The lineup

Texas Hobby 300B

The Texas Hobby 300B walk-behind tractor is one of the smallest units in the entire line.

The power of the gasoline engine is only 3.5 hp, but this is enough to process up to 50 acres.

The gearbox has only one speed. Height adjustment of the handle ensures a comfortable position for the operator while working.

There is a manual start type, the engine is air cooled.

Texas Hobby 500

The Texas hobby 500 series is represented by three models of walk-behind tractors: 500TG with an engine power of 4.75 hp, 500B with an engine power of 5.5 hp. and 500TGR with a power of 3.12 hp.

All models run on gasoline and have the same number of speeds - 1 forward and 1 reverse.

Only the 500 TG is not equipped with reverse gear.

The weight is also almost the same for all models, 42-43 kg.

These cultivators are suitable for work on small and medium-sized farms.

When using additional equipment they can perform a wider range of work.

Technical characteristics of Hobby 500V

Texas Hobby 501

The Texas Hobby 501 walk-behind tractor is a representative of the middle class, as it is designed for work on farms of up to 1 hectare.

The motor power is 5.5 hp, which is quite a lot for its weight of 40 kg.

The presence of a headlight on the model makes it possible to use it at night.

There is a manual start type, and the gearbox only has 1 forward speed. The width of the processed row is 60 cm.

Texas Lilli 532TG

The Texas Lilli 532 TG walk-behind tractor is equipped with a gasoline engine with an operating power of 5 hp, which allows you to process a plot of up to 1 hectare.

The set includes cutters that cultivate the soil to a depth of 30 cm. The unit is started manually.

2 speeds provide maneuverability, and the low weight of 45 kg makes it easy to transport the walk-behind tractor.

However, heavy soil may require weighting agents.

Texas HOBBY 600 BR

The Texas HOBBY 600 BR walk-behind tractor is a representative of the middle class, as it is equipped with a gasoline engine with a power of 5.5 hp.

Air cooling is provided and does not require additional maintenance by the operator.

The fuel tank capacity is 1.5 liters, which is a significant difference from the TEXAS Hobby 600TGR, which has a tank capacity of 3.6 liters.

The set includes 4 cutters that provide cultivation up to a width of 50 cm.

Texas 601 TG

The Texas 601 TG walk-behind tractor is used for both small and large farms.

A spacious 3.6 liter fuel tank, low fuel consumption and an engine power of 5.7 hp make the model popular among consumers.

Manufacturers tried to increase comfort when working with the walk-behind tractor, so they equipped it with an adjustable handle and low engine noise.

The number of cutters supplied in the kit is 6 pieces, and the processing width is approximately 85 cm.

Texas TG 620

The Texas TG 620 walk-behind tractor is a middle-class model that will surprise the owner with its capabilities.

The gasoline engine produces only 4.9 hp and weighs just over 50 kg.

Thanks to removable cutters, the processing width reaches up to 100 cm, which contributes to a larger coverage of the processed area.

The motor is started manually, but thanks to a special lightweight starting system, no effort is required from the operator.

Texas Vision 700TG

The Texas vision 700tg walk-behind tractor uses a TG 650 Power Line engine. This is a 4-stroke model, with gasoline as fuel.

With a motor power of 5.7 hp. the unit is considered high-torque and durable, optimally suited for plowing dense soil.

The steering column is adjustable, allowing the operator to personalize the controls.

The weight of the device is 81 kg, which automatically makes the walk-behind tractor one of the heaviest in the line.

Manufacturers have tried to reduce the noise level of the running engine so that the operator can work as comfortably as possible.

There are 2 forward speeds and 1 reverse, which are regulated by the gas lever.

Types of attachments

When using additional equipment, Texas walk-behind tractors become real workhorses.

As a rule, only cutters are supplied in the kit, but you can purchase the necessary equipment at any center of the dealer network.

The following types of attachments are considered the most popular:

1. Hiller plow is designed for plowing dense soil and breaking up clods of earth
2. A rototiller is the main equipment of a walk-behind tractor, designed for cultivating all types of soil. There are two types of cutters: active type and “crow’s feet”
3. Metal wheels with lugs cling to the walk-behind tractor when standard wheels are not able to pass due to the viscosity of the soil
4. The adapter is a wheelset with a fixed seat and a hitch that attaches this structure to the walk-behind tractor itself. Convenient device control adds operator comfort
5. A rake is useful for cleaning the area

Features of use

• All walk-behind tractors from the Texas company are supplied to the dealer network without oil and fuel. The manufacturer recommends that owners of the units fill in lubricants themselves before use.
• According to the instructions, you must use SAE 30 motor oil and unleaded gasoline with an octane rating of 92 or 95.
• The company reserves the right to supply the gearbox with or without lubrication. As a rule, if the gearbox was not initially lubricated, the kit contains a bottle of lubricant.
• Lubricant must be added to the gearbox every 5 hours of operation in an amount of 60 ml. If the gearbox was lubricated at the factory, then this filling will be enough for the entire period of operation.

It is not recommended to open the gearbox to replace or add lubricant.
If it becomes necessary to add lubricant to the gearbox, then, according to the operating instructions, you must perform the following steps:

1. Remove the spark plug cap
2. Loosen 2 screws
3. Add grease to the hole
4. Tighten the screws
5. Reinstall the spark plug cap
6. Start the engine and run it in

Operating a walk-behind tractor with a low oil level or its complete absence is prohibited.
It is best to store the Texas walk-behind tractor after carrying out a number of procedures that will help keep the unit in working order for a long time:

• After completing all work, wash the cultivator from dirt and soil.
• Clean the gearbox shaft from adhering weeds and grass
• Wet washing with high pressure and detergents is not recommended
• After drying the walk-behind tractor, wipe it with a cloth that has been lightly moistened with oil. This is necessary to prevent corrosion

Operation and Maintenance

Run-in

To extend the life of Texas motor cultivators, reduce breakdowns and unproductive downtime, first of all, you should run in the machine. At the beginning of the break-in procedure, the engine should be idled, then gradually begin to work in a gentle mode - up to 50% of the load for 10-13 hours, various types of soil cultivation are allowed.

At the break-in stage, the main components and mechanisms of the machine are broken in, so you should pay attention to their functioning: the clarity of gear shifting, the condition of the moving parts of the structure, chassis, wheels, the presence of noise. Upon completion of the break-in, change the oil and perform a technical inspection of the cultivator again.

Fuel, oil

Gasoline cultivators Texas consume unleaded gasoline AI-92, fuel consumption is quite economical - 1 l/h, with increasing load, gasoline consumption may increase. The recommended oil grade is SAE 30.

User manual

Recommendations for the use of Texas motor cultivators are similar to the operating rules of other similar units; they are set out in detail in the instructions for each cultivator; we outline the basic requirements:

• You should thoroughly study the instructions and specific features of the model, its technical characteristics, especially methods for emergency stopping of the machine.
• The use of the cultivator for work that is not provided for in the instructions, or exceeding the maximum loads, is prohibited.
• It is prohibited for persons under 16 years of age to operate the cultivator, persons not familiar with the instructions, those in a sick state, or those under the influence of alcohol.
• When working, it is necessary to maintain a safe distance of 20 m from nearby people, animals, and property.
• A thorough inspection of the equipment should be performed before each use.
• Perform preventive maintenance as scheduled.

Basic faults

The most common failures of the cultivator motor and problems with the gearbox. Engine problems (won't start) can occur due to a clogged air filter, muffler, carburetor contamination, and spark plug combustion.

Noise in the gearbox occurs due to lack of oil, oil leakage - in this case, the seals will need to be replaced.

Significant vibration of the cultivator can be caused by improper installation of attachments. If the cutters stop rotating, the clutch cable may not be adjusted or the fasteners may have become loose.

The key to the longevity of any equipment is its proper operation. To extend the life of your assistant and avoid breakdowns, you should follow certain rules:

• It is necessary to make sure that the treated area is not littered with stones, metal objects, or pieces of brick.
• Care should be taken when working near trees to avoid the cutters becoming entangled in the roots. You can’t loosen the ground after cutting it down; the knives will definitely break on the roots.
• A proven method of prevention is to always have a small amount of gasoline in the fuel tank, this will help avoid rust and condensation.
• In case of malfunctions of the cultivator automation, it is highly recommended not to troubleshoot the problems yourself; it is wiser to use the services of specialized centers.

Owner reviews

We invite you to leave your review of Texas walk-behind tractors if you are the owner of any of the brand’s models.

If you managed to identify the advantages or disadvantages of your unit, then share them with our readers, for whom your review may become a decisive factor in choosing an assistant.
Pavel : “I bought a Texas 501 TG walk-behind tractor 5 years ago to make work on the sites easier. Among the advantages, I would like to note only economical consumption, ease of operation and the ability to fill with 92 gasoline. It starts with half a turn throughout the entire period that I have it. The disadvantages include the poorly adjustable handle, because when lifting the opener, you have to bend down a lot. It's not scary if you work for 2 hours, but if you work for 5-6 hours, your back starts to hurt. The throttle control knob is not fixed in the maximum position, so you have to twist it yourself. In one season the spark plug and air filter fell off. The anti-corrosion coating is very weak.” Kostya : “I recently purchased a Texas 501 walk-behind tractor and couldn’t be happier. The torment of plowing is over. In 2 hours I plow the entire garden, which previously took only 3 days. In the future I plan to buy a potato digger and try this type of work. I haven’t identified any shortcomings yet.” Alexander : “I bought a Texas 530 TG walk-behind tractor 3 years ago and realized what efficiency without stress is. The cutters do an excellent job of cultivating soft soil. A powerful unit that just rushes forward. When plowing, you don’t need to make any special efforts – it goes on its own. I really liked the fact that the noise from the engine does not put pressure on my eardrums.”

Extended Warranty

We are pleased to offer you an additional 1 year warranty free of charge!

When purchasing expensive, technically complex equipment, the buyer expects a long service life. But manufacturers, as a rule, give a warranty of only 1 year. We are confident in the quality of the equipment we sell. And we are confident in our customers who take care of their purchases. Therefore, we feel free to extend the warranty period in addition to that stated by the manufacturer. Depending on the manufacturer, this period may vary.

The mandatory conditions for free additional repairs under the extended warranty are:

1. Pre-sale preparation 2. Use only for personal needs (not for commercial purposes). 3. For gasoline equipment - no more than 150 working hours per year. 4.Complete regulated technical maintenance (TO) in our service at least once every 6 months from the date of purchase. The service coupon must contain the necessary notes on the completion of regulated maintenance (MOT).

What is a Texas walk-behind tractor?

The Texas walk-behind tractor is produced in Denmark and used all over the world. It is more convenient to treat a garden or vegetable plot with high-quality equipment for performing various tasks, which the Texas motor-cultivator does an excellent job of. It is easy to operate, store and repair.

The unit breaks down very rarely, but even if this happens, finding parts for a particular model will not be difficult. Attachments for hilling beds or harvesting are available in a wide range of agricultural equipment stores. Parts, lubricants and auxiliary tools for the Texas cultivator should be purchased from certified centers. You can repair equipment yourself or contact specialists.

Maintenance of equipment by the company

Texas cultivator repair and equipment servicing are provided by specialized centers. The operating instructions list the addresses of repair shops. The warranty on the tool is valid for 3 years, so first of all you need to determine the location of the repair center and the possibility of service. This applies to the warranty part of the tool. You can add lubricant and replace the belt on the Texas cultivator in any workshop or on your own. Failures of equipment operating in difficult conditions are classified as follows:

• engine breakdown;
• automation failure;
• failure of mechanical components.

It is these problems that will require contacting a service center.

When buying a Texas cultivator, you need to stock up on branded gearbox lubricant and drive belts. It is easy to find the specifications of the components in the included manual. The numbers and letters of the marking indicate the size and profile of the belt. The designation TEXAS A 41 1/2 13Х1050Li reads, V profile belt with a height of 8 mm and a width of the wide part of 13 mm, reinforced with cord thread, length 1050 mm. The marking is on the wide part of the ring; it is indicated in the instructions for the Texas cultivator. The manual is translated into machine language, but the technical terms are clear.

In addition, the instructions must include the rules for preparing the cultivator for work and the frequency of changing engine oil. Please note that the first crankcase oil change is carried out after 5 hours of operation. You need to use the recommended fuel for work; it differs in different models.

Spare parts for the Texas cultivator are purchased at service centers. They will be delivered even if the model has been in use for a long time and has been discontinued.

Description of the Texas walk-behind tractor

It is necessary to consider the features that the Texas walk-behind tractor has. The company's devices are produced for work on land plots of various sizes with different types of soil. Using a motor cultivator, you can create harrows of the depth that a summer resident needs for planting, and carry out hilling in places where there are a lot of trees and shrubs. To increase the functionality of Texas equipment, the manufacturer produces a wide range of attachments. As a result, the summer resident gets the opportunity not only to dig up beds and plant root crops, but also to harvest crops, transport loads of varying weights, mow weeds and remove snow.

Among the features that distinguish the Texas motor-cultivator from similar equipment are the following:

1. The cultivator is very stable due to the fact that the engine was placed under the cutters by the developers.
2. To control the device, a special remote control has been created, which is located on the steering wheel, which has a comfortable grip.
3. The rear console is lightweight and has improved alignment, making it easy to control the machine on the field.
4. There is a front bumper installed at the front, which is necessary to protect the wheels and engine from damage, dirt and lumps of earth.

Texas units are available in different modifications, which differ in power, functions and technical characteristics. All models of walk-behind tractors are equipped with a chain drive and a 4-stroke engine, which allows you to create harrows up to 30 cm deep (even on very difficult soil).

When moving, the Texas cultivator can bury itself in soft soil, and then it will have to be taken out. This is not difficult to do: the user instructions indicate that you need to turn off the equipment and pull it out of the ground.

The user manual states that the motor cultivator cannot be used on areas of land that have not been cleared of trees and bushes.

If you run a walk-behind tractor on such an area, then trees and chips will remain on the cutters, which can lead to breakage of the sabers. And then you will have to remove them and buy new ones so that the equipment becomes functional again.

Reviews from users and manufacturers indicate that it is recommended to apply the maximum load to the cutters only after going through the break-in process.

About the manufacturer

Despite technological progress, which literally forces manufacturers to modernize their products every year, there are certain products that do not lose their relevance, practically unchanged.

This paradox can be fully attributed to Mantis cultivators, which began to be produced back in 1980 in Pennsylvania. It is noteworthy that from then to this day more than a million copies have been produced, made using the same technology, which has remained virtually unchanged over this entire time period.

, engaged in the production of Mantis cultivators, as well as other garden equipment, has been awarded numerous awards in the USA for its activities.

As for Mantis, it was initially perceived as a unit for women involved in gardening.

The fact is that it weighs about kilograms, which caused a lot of skepticism on the part of the male population of America. However, such bias did not last long, and now the Mantis cultivator is a full-fledged technical unit that is quite popular around the world.

Special cutters patented by Little Wonder played an important role in this. They were curved cutting elements with many small and rather sharp teeth. The special design allowed them to be removed and turned over quite freely.

At the moment, the company is still engaged in the production of Mantis cultivators, specializing in the manufacture of 2-stroke units equipped with a KIORITZ engine, and a 4-stroke unit, which contains a Honda GX25 and GX35 OHC engine.

For more information about the Mantis cultivator, watch the video:

Model range of walk-behind tractors Texas

Texas cultivators are equipped with engines of different power, which determines the nature of the work performed and the basic configuration. One of the popular series among summer residents is the Texas series of Hobby walk-behind tractors, which are produced for working on small plots of land. Hobby models can only work on light soil without stones. According to reviews from owners of lightweight Hobby motor cultivators, for example, Texas Hobby 500, such devices easily cope with creating beds for planting root crops, loosening soil in greenhouses, and forming flower beds.

The Hobby series model range is presented in various options:

1. Hobby 300 - allows you to work in a small garden, creating beds and cultivating areas around trees. The model is equipped with a four-stroke engine with a volume of 148 cm³ and a power of 2.6 kW. The engine is accompanied by a chain gearbox, which allows you to create a harrow up to 38 cm wide and 18 cm deep. The weight of the cultivator is only 28 kg.
2. The Texas Hobby 500 model has a 4-stroke engine with a power of 2.3 kW. The motor works together with a worm-type gearbox, which allows you to create beds 33 cm deep. The width of the bed will be 50 cm. You can make 6 harrows at the same time, since the cultivator has 6 reciprocating cutters. Texas 500 V differs from the previous model in having a more powerful engine (4.2 kW), which allows you to install various attachments on the walk-behind tractor, for example, a rake, a weight, a hiller, a weeder, and a rear wall. The device weighs 43 kg.

Another series of Texas walk-behind tractors is Lilly, which is represented on the market by the following models:

• Texas Lilli 532 TG;
• 534 TG;
• 572 B;
• 530 TG;
• 601 TG, etc.

Lilly models are equipped with engines of different power and build, which affects the use of particular attachments. You can use only those tools on walk-behind tractors that are specified in the instructions for each type of cultivator.

The Texas Lilli 532 walk-behind tractor has a chain gearbox in a steel case, a belt drive, and a 6.5 liter engine. with., functional control system. Starting the model is very simple, you just need to turn on the starter.

Texas Lilli 532 TG weighs 45 kg, creates a harrow up to 50 cm wide and up to 30 cm deep. The tank needs to be filled with gasoline. In stores you can find models with engines with a power of 5 liters. With.

The 532 B modification differs from the Texas Lilli 532 TG in its engine, the model of which is called the TG 500.

The Texas 530 TG motor-cultivator has been discontinued, but spare parts for it are easy to find. Among the features of the device are the following characteristics:

1. Engine TG 500 Power Line.
2. The volume of the combustion chamber is 163 cm³.
3. Single-speed gearbox without reverse.
4. Loosening depth - 32 cm.
5. The width of the processed strip varies from 30 to 85 cm.

Varieties of cultivator models

A range of Texas equipment is divided according to the power of the units and the type of work performed.
The Hobby series, as the name implies, is used in small areas with light soil. Lightweight cultivators are indispensable for preparing beds for root crops, decorating flower beds and digging up greenhouse soil. Cultivator Texas Hobby 300 is small and bold. He will climb into any corner of the garden, cultivate the tree trunk, and cut the beds. The power supply is an American Briggs&Stratton four-stroke engine with a combustion chamber of 148 cm 3 and a power of 2.6 kW. The design uses a chain gearbox. The unit processes 38 cm to a depth of 18 cm. The device weighs 28 kg and costs 21 thousand rubles.

The Texas 500 Hobby series cultivator, with a proprietary TG 485 engine, has a power of 2.3 kW. The design uses a worm-type gearbox. Such a unit will carry out deep moldless loosening to a depth of 33 cm. The width of the processed strip is 50 cm. The set includes 6 reciprocating cutters. The cost of the device is 15 thousand rubles.

At the same time, the 500 V model of this series is equipped with a powerful American 4.2 kW motor. This Texas cultivator uses the following attachments:

• weeder;
• rear hitch;
• hiller;
• weighting agent;
• rake.

High functionality added almost no weight to the instrument, only 43 kg. Only 6 cutters are included with the cultivator. Attachments must be purchased additionally.

The Lilli series includes a model range of three tools - 532TG, 534 TG, 572 B. The power of the equipment in this series is influenced by the type and power of the installed engines. And the most powerful of them will be the Texas 620 cultivator, which means that the equipment is equipped with a strong motor and can cope with the functions of a mini tractor if equipped with canopies. The Lilli series is suitable for mounted implements from stronger equipment, Futura and Vision walk-behind tractors. The initial configuration of the units differs only in cutters, instead of pneumatic wheels on walk-behind tractors.

Read the service instructions carefully. Use only recommended additives and fuel.

The Texas 532 TG 620 cultivator can be equipped with a trolley, a seat, a snow blower and other attachments.

Main technical indicators:

• output shaft power – 6.5 liters. With.;
• processing width – 100 cm;
• chain reducer in a steel case;
• belt drive;
• easy start system.

Another modification of this model, Lilli 532 V, has a cutter insertion depth of 21 cm with a strip width of about 85 m. There are models that use a TG500 motor.

Discontinued, but the Texas 530 TG MY 13 PRC cultivator is available in retail chains. The reliable mechanism was replaced with an improved model. The product was assembled in China. The cultivator is equipped with a TG 500 Power Line engine with a combustion chamber volume of 163 cm 3 . In the original configuration, the width of the processed strip could be set to 30-55 cm, but the cutters could be extended to 85 cm. The loosening depth is 32 cm. The model has no reverse, single-speed.

The Texas 601 cultivator is the most powerful of the units presented in the review. The configuration includes a TG 650V engine with a liner volume of 196 cm 3 . With a width of 85 cm, the cutters go 30 cm deep into the ground. The hero weighs 56 kg. The machine can work with any attachment.

Video review of the Texas cultivator

The most powerful model of the Texas series

The most powerful of the company’s models is the Texas 601, equipped with a TG 650 B motor. Its working sleeve volume is 196 cm³, and the equipment is equipped with split cutters. This model has received the most positive feedback from farmers who have to carry out large volumes of work.

Cultivators 601 are presented in two types - 601 TG and 601 B, which differ in technical characteristics and capabilities. Both types of walk-behind tractors are fueled with gasoline, the consumption of which is very economical, they have an air cooling system, a mechanical starter, speed control, a chain gearbox, and a gearbox that allows the cultivator to move forward and backward.

Take a closer look at the characteristics of the devices.

Briggs & Stratton:

• possibility of using gasoline from AI-80 to AI-95;
• complete with disposable filters;
• straight-through carburetor;
• contactless ignition;
• built-in mechanical speed controller;
• electric starter.

Powerline:

• use of high quality refined gasoline mixed with oil;
• supplied in a cast housing with flange connections;
• pneumatic ignition system;
• air cooling with automatic lubrication system;
• manual starter.

Texas LX550B and LX 500B differ from others in their gearboxes, which are not worm-type, but chain-type. The first option is allowed for use on cultivated land. It often heats up due to prolonged operation; the devices should not be moved in reverse. If the engine has a chain gearbox, it will have a long service life, and its cost will also remain low. Failures such as a broken chain or damaged teeth can be easily corrected independently or for a small fee at a service center.