Claas tucano 450 technical specifications (2007-2013)

Combine harvester "Claas" "Mega" 208

• “Auto Countur” functionality - you can work on rocky soils and fields with complex geometry without any problems;
• power plant from the Daimler Chrysler brand;
• the possibility of installing a larger alternative header than for the 204 model discussed above;
• 2-drum threshing, which better separates grains from straw;
• adjustable rotation speed of the chopper drum;
• 3-speed gearbox, which includes speeds from a few hundred meters to 26 km/h;
• a comfortable place for the combine operator, from which all units of the combine are controlled and monitored;
• full lighting equipment for the model for long work shifts;
• accelerated separation due to toothed agitators on straw walkers;
• clearing the crop from a heap in 3-D projection;
• excellent maneuverability due to wide pneumatic wheels;
• productive screw conveyor.

Working properties:

• Traction - 135 hp;
• Max. width of one passage – 6 m;
• Seed accumulator – 8 t;
• Main drum diameter – 45 cm;
• Gas tank capacity – 500 l;
• Weight – 10.5 tons.

Specifications

Combine harvester claas tucano 560 business
The threshing drum of the combine has a diameter of 600 mm and a length of 1700 mm. Taking into account the yield and type of crop being harvested, the automation sets the optimal speed mode in the range of 395-1150 rpm. The concave coverage angle in the Claas Lexion 780 has been increased to 142 degrees.

Characteristics of working elements:

• header width – from 4550 to 14000 mm (standard headers and Vario headers are used);
• grain tank capacity – 13500 l;
• unloading speed – 120 l/sec;
• straw walker area – 7.48 sq.m.

The combine can lay straw in windrows as it moves or chop it, evenly distributing it over the mown surface in a strip up to 12,000 mm wide.

Similar, but slightly different

Both machines are universal grain harvesters designed to work on any cereal grain and leguminous crops. The lower yield threshold for both when combined with a 7.5 m header is 29-30 c/ha. Detailed specifications can be found on dealer websites. What you should pay attention to:

• The Tucano 450 MSU consists of an accelerator drum, a threshing drum, a breaker beater, an electromechanically driven concave and a six-key straw walker with five stages.
• The Acros 595 Plus MSU consists of a threshing drum with a reduction gear, a breaker beater, a concave with an electromechanical drive, an autonomous rotary-type post-threshing device and a five-key straw walker with seven stages.

The cars are comparable in terms of comfort. You won't notice much difference in either the finish or

in the configuration or in the equipment of the cabins. The pedals of one and the other - as always - are not located where you want them, and there is no platform for resting your feet, by the way. The only thing I want to note is that the control panel of the Rostov car is somehow clearer or more convenient - the buttons are right under the right hand. But the German controls for the most part through a touch monitor. It depends on you, but for me the buttons will be more reliable - here on an iPhone you just poke at the screen a hundred times before it works, so it’s unlikely that anything serious will happen from this failure, but harvesters are getting serious these days, it’s better not to take risks.

"Claas" Tucano 470

12 21 on the clock meaning in angelic numerology

The Claas combine, the hallmark of which is the APS HYBRID technology - an axial-rotor mechanism for producing high-quality grain with reduced losses, a low percentage of deformations and impurities. Together with the ROTO PLUS separator for the residual grain-straw mixture, this unit is considered one of the best in its class. An ergonomic cabin and setting parameters via a joystick create all the conditions not only for high-quality work, but also for the comfort that is necessary in the summer.

• spacious “VISTA CAB” body;
• height-adjustable steering column;
• 8 headlights for use at night;
• multifunctional joystick, which is built into the right armrest of the operator’s workplace;
• visualization of tasks on the “CEBIS” screen;
• “AUTO PILOT” / “LASER PILOT” options integrated into the system;
• "CLAAS TELEMATICS" - the ability to track downtime and movements of the combine in space and time with the provision of map data;
• adaptability to the VARIO (main grain thresher), CONSPEED, C 540, RAKE UP and SUNSPEED attachments due to the multifunctional connector.

• Power – 7.2 l;
• Passage width – up to 9 m;
• Bunker – 9 m 3;
• Unloading – 75 l/s;
• Fuel tank – 650 l;
• Cleaning area – 5.65 m2;
• Weight – 12.95 tons.

Specifications

Harvesting grain crops

The threshing drum of the combine has a diameter of 600 mm and a length of 1700 mm. Taking into account the yield and type of crop being harvested, the automation sets the optimal speed mode in the range of 395-1150 rpm. The concave coverage angle in the Claas Lexion 780 has been increased to 142 degrees.

Characteristics of working elements:

• header width – from 4550 to 14000 mm (standard headers and Vario headers are used);
• grain tank capacity – 13500 l;
• unloading speed – 120 l/sec;
• straw walker area – 7.48 sq.m.

The combine can lay straw in windrows as it moves or chop it, evenly distributing it over the mown surface in a strip up to 12,000 mm wide.

Characteristics of Case Steiger 450

• Engine type – diesel, six-cylinder
• Working volume – 12.7 liters
• Power – from 450 to 502 horsepower
• Speed ​​in nominal mode – 2100 rpm
• Maximum torque – 2136 N/m
• Tank capacity – 1200 liters
• Fuel filter - separator
• Transmission – PowerShift, with 16 forward and two reverse gears
• Differential lock with multi-disc electronic control
• Hydraulic system – variable volume, pressure and flow compensated
• Hydraulic pump capacity – from 159 to 428 liters per minute (depending on version)
• Attachment lifting capacity – 9 tons
• Total weight - 22.4 tons
• Dimensions, mm: Length – 7493, Height – 3843, Width – 3048.
• Tire parameters are dual, with dimensions 710/70R42.

Tractor MTZ 3522 technical characteristics

Harvester header "Akros-580"

Like other Akros modifications, the 580th model is equipped with unified Power Stream headers, with a working width of 6.7 or 9 meters. This header is rightly considered the most progressive and technologically advanced in the entire post-Soviet space, not inferior to the most modern European models.

Largely thanks to the “Level Glide” longitudinal-transverse copying of the soil relief introduced on the header. In practical terms, this means efficient use of the entire length of the header on uneven fields.

Harvesting grain with a Power Stream header.

This header features a lightweight yet durable design; increased diameter of the reel rake pipes; combined disks and beams of the reel, its hydraulic drive; reels the rake with double fingers. The header barrel is elongated, with an additional counter-cutting surface in the cutting apparatus. The gap between the conveyor slats and the bottom of the feeder chamber with beater-normalizer has been increased by 40 mm.

An important feature of the Acros-580 combine header is that the progressive planetary drive of the Schumacher knives, which in the 530 Acros was available only as an additional option, is installed here as standard, as standard. "Schumacher" works smoothly, accurately, without wearing out, with a high cutting frequency (1080 strokes per minute)

The double cutting edge ensures fast and clean cuts with minimal wastage.

Separately, the combine is equipped with special headers for harvesting corn and sunflowers.

Models of foreign factories

The John Deere combine is one of the most popular in the world. The advantage of using it is a harmonious combination of price and quality. Maximum reliability and ease of operation. Combines of this brand are used in fields with a large volume of work, including on inclined surfaces. A powerful engine (305 hp) of its own brand and a well-functioning mechanism of hydraulic and electrical systems allow it to work even in rain. Dimensions of the combine: 8.98 m long, 3.77 m wide. Advantages include the presence of:

• “catcher” of stones;
• cleaner;
• accelerator device for feeding cut raw materials.

John Deere

The Claas Tucano-450 combine harvester is a representative of the premium class. The machine is equipped with a multifunctional pipeline connection system and a central lock. The header is equipped with a control unit with memory of previously set modes. Inside there is a powerful and reliable Mercedes-Benz engine and a large fuel tank (650 l). This allows uninterrupted operation in remote fields.

Attention! The successes of Claas combine harvesters are included in the Guinness Book of Records

Engine

Combine harvester claas tucano 450
The Claas Tucano 450 model is equipped with a Mercedes-Benz OM 936 LA diesel engine. The motor is lightweight and compact in size. The unit was the first among diesel power plants to receive an exhaust camshaft.

Advantages of the Mercedes-Benz OM 936 LA engine:

• large reserve of torque;
• economical consumption of oil and fuel;
• unsurpassed reliability;
• stability of parameters over a wide temperature range;
• simple maintenance;
• high traction performance.

Characteristics of the Mercedes-Benz OM 936 LA engine:

• working volume – 7.2 l;
• rated power - 299-320 hp;
• number of cylinders – 6;
• emission level – Tier III.

The 650 liter fuel tank ensures long-term autonomous operation and allows the combine to be operated in areas remote from fuel filling stations.

Grain harvester "Claas" Mega 204

It is an improved series that differs from the previous one - “Claas” “Dominator” - by an updated threshing system. Ideal for small farmland. The designers achieved hydraulic control of the driving units of the machines, which significantly affected the productive characteristics of the combine. The header has ear lifters that facilitate the harvesting of fallen grain of any moisture content. The hydraulic cylinders of the header carry spring elements through which field unevenness is copied.

Advantages:

• adaptability for land holdings of different configurations and areas;
• imported OM 366 A Mercedes Benz engines running on 6 cylinders;
• economical diesel consumption;
• 3-vector separation of the harvested mass, facilitating operation on slope areas;
• auto-copying of topographic irregularities using the “Autocontour” technology;
• single-cycle separation;
• crop coverage angle expanded to 117 0;
• 3-speed transmission;
• good cross-country ability in limited cultivated areas.

Specifications:

• Power – 200 hp;
• Header width – 5.1 m;
• Seed hopper – 6200 kg;
• Threshing area – 1.32 m2;
• Fuel tank – 400 l;
• Weight – 9000 kg.

Advantages

Automated control of the combine, which includes CMOTION, TELEMATICS, GPS PILOT systems, allows the driver to pay more attention to monitoring work processes.

The threshing accelerator APS, unique in its capabilities, and its more advanced version HYBRID help increase combine productivity by an average of 20%.

The functionality of this model is significantly expanded due to the optional installation of productive headers with a working grip of up to 9 meters. The presence of an all-wheel drive chassis increases the maneuverability of combines operating on weak, sandy and waterlogged soils.

"Claas" Mega 350

Equipped with a Daimler Chrysler OM 906 LA engine, which, when the turbocharging function is turned on, is capable of delivering 170 kW. The bunker is completely unloaded in less than 2 minutes.

• wide-cut reaping unit;
• transverse-longitudinal copying of the relief of the underlying surface;
• “APS” technology, which consists of accelerated feeding of spikelets into the main drum and an increase in centrifugal force;
• the separation zone is twice as large as Mega 208;
• reverse of the reaping part for cleaning without manual intervention;
• work with an alternative header with a 6.6 m gripper;
• hydraulic transmission with 3 speed stages;
• fast transport speed of 24 km/h;
• comfortable cabin with air conditioning, temperature heating functionality and on-board computer;
• Possibility of operation in areas located at an angle of up to 20 0.

Specifications:

• Power – 230 hp;
• Fuel consumption – 8 l/ha;
• Gas tank - 0.4 m 3;
• Granary – 7200 kg;
• Unloading – 72 l/s;
• Weight – 11 tons.

Combine harvester Klaas Lexion 460 – machine advantages

The basic package of this model includes a 6-cylinder Mercedes-Benz diesel engine with turbocharging and a liquid cooling system. The internal combustion engine is distinguished by its modest fuel consumption and high repairability. It is characterized by high stability during operation in different weather conditions.

The durable threshing drum ensures high efficiency when harvesting and processing crops with high humidity. The design of the Klaas combine includes a 6-key straw walker, 4.4 m long.

Machine parameters include:

• power – 300 l. With.;
• fuel tank capacity – 650 l;
• grain bin capacity – 9000 l;
• bunker unloading speed – 75 l/sec.;
• operating weight – 12 tons.

A modern cabin with a wide viewing radius allows you to fully control the harvesting process. Heating and ventilation systems make it possible to use the combine at any time of the year.

Combine harvester "Claas" Lexion 670

Premium-class grain harvester with a high-precision system of threshing and grain separation, which completely eliminates damage and loss of the crop during harvesting and reloading. Thanks to the larger tires, Terra Truck is gentle on the soil. Solves the problem of recycling crop residues by grinding and evenly distributing them over the entire field area.

Peculiarities:

1. the presence of a pre-accelerator in the thresher, which accelerates the harvested material to a speed of 20 m/s;
2. MSS separator, which allows you to extract residual grain regardless of operating conditions;
3. volumetric hopper with automatic lid control;
4. automated adaptation of the direction of spreading crop residues depending on the wind rose of the territory;
5. ergonomic cabin with a 360° view;
6. visualized control of final grinding from the combine operator's seat.

Specifications:

• Power potential – 431 hp;
• Chopper width – 170 cm;
• Straw walker keys – 6;
• Max. grip – 12.27 m;
• Tank for diesel – 800 l;
• Max. transport speed – 40 km/h.

Combine harvester "Claas" Lexion 460

A modern grain harvesting complex produced in 1997-2001. It has a simple and reliable computerized control system “CEBIS”, which monitors the performance of each unit and notifies about breakdowns. With 300-horsepower power, it consumes an order of magnitude less fuel than similar models - only 260 g/hp.

Advantages:

• heat- and vibration-isolating cabin with a convenient control panel;
• speed-controlled turbofan for cleaning heavily contaminated grain;
• suitability for harvesting industrial crops;
• the ability to unload the bunker in parallel with harvesting;
• increased range of inter-shift maintenance;
• yield control "QUANTIMETER".

Performance characteristics:

• Fuel tank – 0.65 m3;
• The length of the 6-key straw walker is 440 cm;
• S treatment circuit – 9.85 m2;
• Seed receiver – 9 m3;
• Rotor mode – up to 1.05 thousand rpm.

Combine harvesters Jaguar

Among all the Class grain harvesting machines, the Jaguar series is worthy of special attention. This is the largest model range, which has undergone 8 design changes in its history.

Jaguar combines began to be produced in the seventies of the last century. Among the specific features, one can note economical fuel consumption with good performance.

All the positive qualities are noticeable in the Jaguar 850 model. This is a transitional car between the outdated 800 and the more modern 900 series.

Technical characteristics of the Jaguar 850:

Forage harvester CLAAS Jaguar 870

Among the features of the Jaguar 850, we can note a double cabin with a panoramic view. All main components of the Jaguar 850 are controlled by an on-board computer.

It is worth noting that all machines in this series, regardless of the type of crop, operate with minimal losses. Jaguar combines are equipped with a hydrostatic transmission and have stone catchers.

Despite the many undeniable advantages of Class grain harvesting equipment, there are also some disadvantages. These include the high cost of equipment. Of the entire model range, the average farmer can only purchase an outdated Class combine from the Dominator series.

The presence of complex electronics often leads to malfunctions of the on-board computer, especially in regions with low temperatures and high humidity. Many components are hidden and in the event of a breakdown, a significant part of the equipment must be removed.

Attention, TODAY only!

Advantages

The Claas Lexion model 580 combine is characterized by economical consumption of fuel and lubricants, and a large time interval between routine maintenance (50 hours). The traction parameters of the power unit are maintained over a long service life of at least 3000 m/h between overhauls.

The machine copes well with harvesting food and feed grain crops with minimal loss of working time for reconfiguring working units. This is facilitated by free access to control units. The autonomy of the combine in remote areas has been increased by increasing the usable volume of the fuel tank to 940 liters.

The list of advantages of this model:

• unification of many spare parts and consumables;
• comfortable working conditions for the operator;
• modern lighting equipment that increases the safety of harvesting work in the evening and at night.

From 1992 to today

CROP TIGER – a baby for all occasions

Even today, in many parts of the world, agriculture is practiced in the smallest areas. For economical harvesting with minimal losses, CLAAS has developed the CROP TIGER. The development of the CROP TIGER model was started by CLAAS specialists in the early 1980s. Her goal was to design a rice harvesting machine primarily for the Asian market. Originally assembled in India, CROP TIGER was specifically designed for rice harvesting. But thanks to constant improvement, today it can be used in grain farming with no less success.

"Klaas" 360

The 360th model "Claas" was produced in the period 2003-2009. and its release is currently suspended. Like other Claas combines, the Mega series is distinguished by an effective threshing system, excellent maneuverability and rational consumption of fuels and lubricants. Due to the availability of standardized spare parts and the simplicity of the mechanisms, this combine can be repaired without contacting technical support centers.

• exceeded power potential of the power plant;
• increased gas tank volume to work longer without stopping;
• possibility of equipping with a non-standard 9-meter header;
• turbofan and lattice grain cleaning;
• 6-chord straw walker, processing straw with minimal damage;
• speed-adjustable drum;
• extended concave angle;
• improved hydraulic control performance, which makes it possible to simultaneously control several components;
• wear-resistant drive and V-belts;
• "Auto Countur" - copying mechanisms that allow you to adjust the reaping part to uneven surfaces.

• Thrust - 258 hp;
• Diesel capacity – 0.5 m3;
• Granary – 8200 kg;
• Unloading – 72 l/s;
• Straw walker size – 4.4 m;
• Weight – 11.8 tons.

Design and service features

The appearance of the flagship of the Lexion series is slightly different from its “brothers”. The model received a steep front wall of the bunker, which increased in size. There are significantly fewer differences in design between modifications. The Claas Lexion 780 is based on an original four-link suspension, which contributes to stable performance in difficult working conditions and a reduced turning radius. The 2-speed gearbox was retained.

The Klaas Lexion 780 received an electro-hydraulic drive, which increased the speed performance of the model. The Power Trac all-wheel drive chassis and 67.4-inch wheels also help improve maneuverability and off-road capability. The drive wheels of the combine were made by analogy with other representatives of the line. They were a kind of caterpillar drive, where a rubber band was used as tracks. The steering wheels remain pneumatic with a pressure adjustment function.

Main working elements:

• headers of various types (Standard, Vario, Cerio). In addition to the basic headers (category C), the combine could work with alternative modifications with smaller and larger grips. Additional devices used for harvesting oilseeds, fodder and seed crops were also offered. Thanks to the multifunctional coupling, equipment replacement was carried out in a short time;
• threshing and separation system. The 1.7 meter threshing drum is equipped with the APS Hybrid System, which combines the powerful Roto Plus separation mechanism and the APS tangential threshing system. On-board electronics allow you to adjust the drum speed regardless of the rotor rotation parameters. The process is adjusted based on yield indicators, crop type and taking into account changing operating conditions. The system also allows for gentle threshing with high productivity. The threshing device is equipped with a pre-acceleration mechanism that increases operating efficiency. The combine performs residual grain separation with maximum efficiency due to increased grain feeding speed between concave and rotors and increased centrifugal force. This technology is relatively new for the Lexion series.
• cleaning system. After the separator separates the grain and straw, other impurities are removed by means of a strong air flow coming from the fan. Cleaning efficiency is supported by a system of fine and coarse mesh. The 4D cleaning circuit has proven itself well on steep terrain and with high crop yields. When moving downwards, the air mass is automatically increased, when moving up - a reduction;
• grain tank 13500 l. The productivity of the 4XL screw conveyor has been increased to 120 l/sec;
• straw distribution system. The Claas Lexion 780 combine is equipped with new straw distributors that blow the chaff outward when it is placed in the windrow. The radial distributor, which ensures stable speed, remains unused. The equipment can operate in 2 modes: uniform distribution of straw across the width of the header in a thin layer or laying it in a windrow.

The developers did not forget about driver comfort. The combine received a large cabin and a special option that allows you to adjust the main working parts using hydraulics. Thus, the operator can install the radial distributor in 3 possible positions (windrowing, chopping, transport option) without leaving the cabin. Working with computer equipment has been significantly simplified. The Cemos mode optimization system provides the operator with recommendations regarding the reconfiguration of nodes without intermediate requests. The integration of the special Automatik assistance system improves the machine's handling.

To enhance comfort, the cabin features air conditioning, an adjustable steering column and a customizable driver's seat. Such options minimize operator fatigue during operation.

The combine is also equipped with a transport trolley, which has steering rear wheels and keeps the trail perfectly.

Claas Lexion 780 is a flagship model that requires specialized maintenance. The combine service intervals are extended, but they are quite expensive. It is the high cost of spare parts, material components and the difficulty of maintenance that are the main disadvantages of the model.

Series

Let's look at all the lines of Klaas combines that were supplied to us. But let's start with modern models and gradually move on to earlier models.

Lexion

Let's start with the Lexion line of combines. This line is divided into two series - Lexion 700 series and Lexion 600 series. Each series includes several models.

The use of an electro-hydraulic drive ensures high speed when moving the combine. At the same time, Lexion combines are equipped with the Terra Trac drive wheel system, which provides reduced ground pressure. In fact, the drive wheels of these combines are created like a caterpillar drive, only a rubber band acts as a caterpillar. But the steering wheels remained the same - pneumatic, equipped with a pressure regulation system.

The 700 series of Lexion combines consists of 3 models: 750, 760 and 770. Structurally they are the same, differing only in some parameters. The same series includes model 780 - released for the 100th anniversary of this manufacturer, but this model is not officially supplied to us, although “gray” dealers have it.

Characteristics of Lexion 770-750 combines:

Characteristics of TUCANO 580

In October 2022, the updated TUCANO 580 grain harvester rolled off the Russian assembly line, replacing its predecessor TUCANO 480. Before this, the prototype was tested at the Kuban training farm in the Krasnodar region. The main objective of the tests, in which the new and old TUCANO models took part, was to compare their main performance indicators when harvesting under absolutely identical conditions.

Both combine models were used to harvest Yuka wheat. The distance covered was 1240 m, which, with a header width of 7.8 m, amounted to almost one hectare of processed area. The productivity of the new TUCANO 580 model was higher by 18.7%, amounting to 35.5 t/hour. At the same time, fuel consumption decreased by 13.3% from 1.96 kg/t to 1.70 kg/t. The total productivity of TUCANO 580 for an 8-hour shift, taking into account the time for turns, unloading and downtime, was 22.74 t/hour.

Among the updates introduced to the TUCANO 580 is the installation of a rotor with a diameter of 570 mm, which is driven steplessly by the CVT directly from the cabin during operation in the range from 480 to 920 rpm. This ensures high separation intensity and guarantees good grain quality. The ability to mechanically adjust the opening of the rotor damper helps to adapt the separation area to different cleaning conditions and thereby achieve maximum throughput. The grain tank has been increased to 9000 l, which, with productivity increased by a third to 105 l/s, can be unloaded in just two minutes. Let us remind you that the TUCANO model range was updated in 2014. Since October 2022, all updated models of the 300th, 400th and 500th series have entered mass production in Krasnodar.

Transmission

The power of the power unit with minimal torque losses is used to drive the chassis and activate threshing and separating equipment with a productive APS accelerator.

• The threshing system includes a drum with a diameter of 450 mm and a width of 1580 mm and a ROTO PLUS key type separator.
• The rotation speed of the threshing drum is adjustable in the range of 650-1500 rpm; when the reduction gear is turned on, this figure decreases to 280-1500 rpm. The sieve area is within 5.62 m2.
• Cleaned grain is dumped into a 9 m3 hopper equipped with a productive (105 l/sec) unloading screw conveyor.

Technical characteristics of combine harvesters Class (Claas)

LEXION 770 / 750 combines, their brief characteristics and main advantages

In the Class (Claas) Lexion LEXION 770 / 750 combine harvesters, the company embodied the ideological directions directly in the settings of these machines. The installed modern sensor records the main values ​​that affect the operation of the machine and automatically adjusts the equipment settings to the current conditions. The automatic sensor system independently or based on the settings of the managing master controls all the main working elements. The main advantages of the LEXION 770-750 combine include the following characteristics:

• installed APS threshing system, thanks to which productivity increases up to 20%;
• the new drum model installed improves grain quality;
• the latest SPECIAL CUT II chopper is used;
• the installed radial spreader distributes the mass evenly over the entire working width;
• electro-hydraulic drive saves time, reaching speeds of up to 40 km/h;
• the steering is represented by an automatic system and ensures ease of operation and comfort;
• The working width of the header reaches 12 m, due to which the masses are distributed evenly, improving the power and performance of the machine.

LEXION 670 / 650 combines, their brief characteristics and main advantages

The LEXION 670 / 650 combines combine all the best technical characteristics. This model has been developed and improved over 75 years in close cooperation with the best of German partners. The main advantages of the LEXION 670 / 650 combine include the following characteristics:

• modern APS threshing system, increasing its productivity by up to 20%;
• radial spreader ensuring uniform distribution of the mass along the entire length;
• grain receiver volume 11000 l;
• grain unloading speed 110 l/s;
• special tire technology that ensures respect for the soil cover;
• automatic steering system;
• increased header width up to 12 m, allowing optimal distribution of masses.

TUCANO 480 / 470 combines, their brief characteristics and main advantages

The TUCANO 480 / 470 combine harvester model represents the newest category of harvesting equipment. It combines the best characteristics of high-quality agricultural machinery.

The main features of this combine include:

• the cabin is spacious and comfortable;
• multifunctional control joystick in the cockpit;
• a large selection of additional work attachments;
• VARIO header;
• gentle threshing;
• automatic and manual adjustment of the mechanism to changing operating conditions throughout the day;
• drum operation independent of rotor speed.

TUCANO 450 / 320 combines, their brief characteristics and main advantages

The TUCANO 450 / 320 combine is the only one in its class that is equipped with a powerful and practical APS threshing system. The performance of this model is one of the highest among similar machines on the agricultural harvesting equipment market.

Its main differences and advantages:

• the on-board system is represented by a modern electronic system CEBIS;
• multifunction joystick;
• crop mapping;
• absolute comfort in operation and simplicity of mechanisms;
• built-in harvest harvesting mechanism;
• built-in lighting in the viewing window, allowing you to control the process of mass gathering for final grinding.

By looking here you will learn everything about concrete trowels.

By clicking on the link you will see a review of the BelAZ 75710 with its technical characteristics.

TUCANO 450-320

DOWNLOADS

Specifications ✔

Instructions, brochures ✔

Watch videos ✔ TUCANO 580-320

TUCANO 580-320 GRAIN HARVESTERS. YOUR BENEFITS:

• CMOTION, multifunction joystick, CEBIS, TELEMATICS, yield mapping system and GPS PILOT guarantee innovative operating and control comfort;
• Increased productivity by 20% thanks to the APS system APS and APS HYBRID systems;
• Unique in its class threshing technology;
• A grain tank with a capacity of up to 10,000 l allows you to extend continuous harvesting time, and high unloading speed reduces downtime;
• This significantly increases productivity;
• New VARIO headers with an adjustment range of 700 mm without rapeseed inserts;
• Mercedes-Benz OM 926 and Perkins 1506 D engines guarantee huge power reserves even in the most difficult operating conditions;
• New all-wheel drive axle with 30% increased traction.

NEW: High performance in a compact format.

The TUCANO 560 combines the throughput of a 6-tab combine with the dimensions of a 5-tab combine. When equipped with 800 mm wide tires, its transport width is less than 3.50 mm; when equipped with 680 mm wide tires, it is less than 3.30 m. This makes the TUCANO 560 optimally suited for travel both on the road and in the field.

Grain tank 10,000 l.

The TUCANO 580, 570 and 450 models are now equipped with a 10,000 liter grain tank. It is adapted to the productivity of the combine and the width of the header and allows you to process large areas without problems. To learn more…

Cleaning system and careful grain transportation.

We increased the diameter of the grain auger by 50% and strengthened the drive. Thanks to this, even with a high corn harvest, TUCANO has reserves to achieve maximum productivity. To learn more…

APS threshing system. TUCANO 580/570/560/450/440/430.

Our patented threshing system offers increased productivity and consistent power. The threshing drum also provides a decisive advantage. Thanks to the accelerator, the material flow speed increases from 3 to 20 m/s. To learn more…

Unique APS threshing system. TUCANO 580/570/560/450/440/430.

Innovative CLAAS technologies already operate in front of the threshing drum. Significant acceleration of the grain mass flow from 3 to 20 m/s ensures maximum efficiency of all subsequent processes:

• Thanks to the pre-accelerator, the plant mass is separated more efficiently;
• The flow of plant matter becomes more uniform and moves 33% faster;
• More efficient grain separation due to increased centrifugal force;
• Up to 30% of all grains are separated already in the preliminary concave located under the accelerator, which significantly reduces the load on the main deck.

A 20% increase in productivity with the same fuel consumption is the main benefit of the APS system.

Universal pre-concave.

Pre-deck in the form of a universal MULTICROP design for harvesting various crops. Quick change of 3 segments to reduce retooling time and cost efficiency.

Hydraulic deck adjustment

The concave is adjusted hydraulically from the operator's seat, which allows you to comfortably and quickly adapt the work to the threshing conditions that change throughout the day. At the same time, parallel running of the concave ensures optimal threshing quality.

Long threshing path, large grain separation area.

In the APS thresher from CLAAS, the specialists have succeeded in extending the main concave around the threshing drum much further than in traditional models. Such an angle – 151° – has never been seen anywhere before. Benefit from gentle threshing technology based on large concave clearance and low drum speed combined with reduced fuel consumption.

A convincing combination: APS HYBRID SYSTEM. TUCANO 580/570/560.

The APS HYBRID SYSTEM threshing system from CLAAS is a combination of two efficient technologies: the APS tangential threshing system and the high-performance separation system ROTO PLUS.

A unique combination with undeniable advantages:

• Adaptation of the drum rotation speed in the threshing system regardless of the rotor speed;
• Adjusting the workflow in accordance with changing conditions during the day;
• Gentle threshing with maximum productivity.

Only CLAAS has been able to combine both systems in one for maximum performance.

ROTO PLUS – high performance. TUCANO 580/570/560.

The operating principle of the ROTO PLUS rotary separation system is simple but effective. The APS threshing beater feeds the mass to the rotor. The rotation of the rotor provides a powerful centrifugal force, under the influence of which the remaining grain is effectively separated.

Rotor variator for stepless speed control.

For maximum flexibility throughout the day or adaptation to different crops, the speed is infinitely adjustable in CEBIS from 920 to 480 rpm. This allows you to influence the quality of the straw in a matter of seconds, for example if the straw is intended for harvesting. Also, at low speeds in dry conditions, the load on the sieve from short straw can be reduced. If full machine performance is required, the rotor speed is simply increased again.

Step drive.

The machines can also be equipped with a step drive with eight rotor speeds.

Mechanical rotor plates.

To flexibly change the rotor separation area, the first and second concave can be covered with plates. The adjustment lever is located in an easily accessible location on the left side of the machine. You can close both or only the first concave. In very dry conditions, this allows you to reduce the load on the sieve, and in humid conditions, use a larger separation area to effectively separate residual grain. The result: variable rotor separation area ensures maximum performance in all operating conditions.

Sixth concave.

To increase productivity, the separation system of TUCANO 580 and 570 has been improved. An additional sixth concave under the rotor increases the separation area and improves efficiency compared to the TUCANO 560 with five concave units.

Classic threshing unit. TUCANO 340 / 320.

Threshing and separation: in these areas, high-quality MSU should always be at its best – in all conceivable conditions. The classic CLAAS threshing unit provides convincing proof of this again and again. No matter what challenge is thrown at it: its versatility is clearly demonstrated both in the full threshing drum width of 1.58 m (TUCANO 340) and in the width of 1.32 m (TUCANO 320).

• Easy access to the drum from the front through an inclined conveyor or from both sides through large hatches;
• High operational reliability thanks to the extremely robust design of all drives, especially the threshing drum drive.

From beans to clover seeds: the MULTICROP deck adapts to any crop.

The MULTICROP deck located under the threshing drum allows individual sections to be easily replaced. You can quickly adapt the deck to a wide range of crops, varieties and maturity levels - resulting in the optimal combination of clean threshing, gentle product handling and high separation efficiency.

NEW: preparatory bottom made of polymer.

The preparatory bottom conveys the separated grains from the threshing system and from the ramp to the upper sieve and at the same time provides the first preliminary sorting into grain and chaff. When working with very wet material or in the presence of a large proportion of greenery, the preparation floor is subjected to high stress. For inspection and cleaning, individual segments can be pulled forward through the stone trap. This ensures uniform loading of the cleaning system.

Hydraulic deck adjustment and overload protection.

On TUCANO 340 and 320 models, the distance to the deck is set in the CEBIS system. Hydraulic overload protection is also suitable for protecting a conventional thresher from damage by foreign objects and from jamming.

Hydraulic adjustment of the concave outlet section.

To adapt the machine to different types of crops, the concave outlet section can be installed in two positions: wide – for example, for corn or beans, narrow – for grains. Adjustment is carried out by turning the valve at the cabin door.

Classic separation. TUCANO 450 / 440 / 430 / 340 / 320.

Grain here, straw there: the straw flows evenly through the 4.40 m long straw walker, which is open at the bottom, ensuring the reliable release of virtually all residual grain. A separate pitch board guides it towards the shake board. This system allows even large volumes of straw to be processed quickly and easily.

Resistance is futile. Dehairing agent CLAAS.

Above each straw walker key, two rakes with a lever drive are located one behind the other, which, actively loosening the straw from above, contribute to its distribution in a thin layer and uniform passage through the straw walker. The result: the residual grain is easily released from the straw and falls through the straw walker cover onto the pitch board.

Capacity control is the key to maximum productivity.

You can monitor the separation and cleaning process as easily as if you were watching it in a mirror: right from the cab with the CLAAS Throughput Monitor. It demonstrates high accuracy of display and settings and automatically adapts to crops of varying complexity.

Advantages:

• Thanks to the possibility of parallel monitoring, you can quickly optimize the parameters of the cleaning and separation processes;
• The throughput control system shows the optimal speed of the machine during threshing;
• Feel confident even when working at peak productivity.

NEW: Pure performance.

Clean grain in the grain bin and easy adjustment of the cleaning system is the desire of any machine operator. To achieve this, we have optimized the cleaning system of the entire TUCANO series, and also modified the lower sieve and its oscillation angle. The result: clean grain, less material in the product, easy adjustment.

NEW: 50% larger grain auger.

We increased the diameter of the grain auger by 50% and strengthened the drive. Thanks to this, even with a high corn harvest, TUCANO has reserves to achieve maximum productivity.

Centrifugal fan or turbine.

• A 6/4-turbine or centrifugal fan will ensure uninterrupted flow and uniform distribution of air even with uneven loading of the working sieve;
• Forced air supply will prevent the formation of a thick layer of mass;
• Stable flow even with low air flow;
• Possibility of smooth adjustment from the cab.

Preparatory bottom.

The preparatory bottom is used for preliminary sorting of the mass: the grains fall down, and the straw and chaff are sent up. This allows you to reduce the load on the upper sieve and improve the quality of cleaning. To clean the preparation bottom, all six polymer segments are dismantled forward.

Single or double cascade.

• Significant reduction in the load on the upper sieve;
• Increased productivity, especially with dry and brittle straw.

Electric adjustment of sieves.

Developed by CLAAS, copied by competitors. Electronic sieve adjustment from the cab:

• Precise control;
• Simple and convenient;
• Without having to leave the cab.

3D cleaning

• Dynamic slope compensation – active control of the upper sieve;
• Full preservation of performance when working on slopes with a roll of up to 20%;
• Wear-free and maintenance-free design;
• Easy and quick retrofitting;
• In combination with AUTO CONTOUR - the ideal package for working on slopes.

10,000 l. More room for great grain.

To ensure high productivity, the TUCANO 580, 570 and 450 models are equipped with a grain tank with a capacity of 10,000 liters. It has sufficient capacity for harvesting large fields.

High unloading performance.

TUCANO series combines are equipped with a top unloading system with a capacity of up to 105 l/s. Thanks to this, unloading the grain tank takes less than two minutes. In addition, TUCANO has an increased overload height and width. This allows even large vehicles to be loaded without problems. Accordingly, suitable unloading augers are available for header widths up to 9.22 m.

NEW: continuous fill level display.

When measuring volume in a grain elevator, a photocell monitors the filling of each blade. The resulting value is continuously displayed in CEBIS - this allows the use of the Fleet View application.

CEBIS rear view camera.

CEBIS rear view camera image

PROFI CAM image on an additional monitor

Everything is under control with Profi Cam

All TUCANO models can be equipped with a PROFI CAM camera installed at the end of the unloading auger. Thanks to the location of the camera in this particular place, control of three processes at once is ensured using an additional color monitor in the cabin or via the S10 terminal:

• Retracted unloading auger: process of unloading the hopper;
• Folded unloading auger: rear of machine when reversing or driving on roads;
• Folded unloading auger: distribution of the crushed mass.

In total, up to four video cameras can be connected to the system, synchronously transmitting the image to a color monitor or S10 terminal in the combine cabin.

CEBIS rear view camera.

The rear view camera, installed on the rear bonnet of the separation system, transmits the image directly to the CEBIS screen when the TUCANO is reversing.

Chop briefly and distribute evenly.

From the rotors, the straw is fed into the chopper for fine cutting and even distribution over the set working width. Next, the chaff passes through a sieve into a heavy-duty distributor, which scatters it across the field in an even layer. At the same time, the spreading width can be easily adjusted.

NEW: Electrical adjustment of the rotor guide plate in the TUCANO 500.

The chopper loading and the roller shape can be changed using an electrically adjustable guide plate installed at the rotor outlet. Depending on the humidity and properties of the straw, the mass flow is always fed as close to the middle as possible. This is the only way to achieve uniform distribution in the shredder. When laying windrows, the width of the windrow can be adjusted by adjusting the rotor guide plate. When the rotor guide plate is fully retracted, the windrow width will be maximized for best straw drying and even feeding into the baler across the entire width of the pick-up.

SPECIAL CUT.

For all models of the TUCANO series, a SPECIAL CUT chopper is supplied instead of a STANDARD CUT. The chopper is switched on and off electro-hydraulically using a sensor when the position of the guide plate changes. SPECIAL CUT features a 30% increase in the number of knives. 80 – in TUCANO 580/570 and in combines with six straw walkers (450/440/340), 68 – in combines with five straw walkers (430/320) and TUCANO 560. The special streamlined design of the body promotes uniform supply of straw. This ensures low energy consumption and high-quality straw spreading. The material is then fed into the ACTIVE SPREADER or straw distribution hood.

Full width distribution: ACTIVE SPREADER (TUCANO 580/570/560/450/440/340).

The larger the straw volume and the width of the header, the more accurately and evenly the straw must be distributed. The ACTIVE SPREADER system from CLAAS provides the required quality and precision.

The plant mass is fed through two counter-rotating rotors, accelerated and evenly distributed over a given working width of up to 9.3 m. The operator can set the laying direction directly from the cab.

The TUCANO combine provides efficient straw distribution with minimal fuel consumption. The ACTIVE SPREADER and SPECIAL CUT systems are presented for the first time in combines of this class, giving TUCANO a clear leadership in the upper middle segment.

NEW: SPECIAL CUT for corn harvesting, factory equipped.

The TUCANO 500 comes factory equipped with a SPECIAL CUT chopper for harvesting corn.

INCREASED ENGINE POWER WITH HIGHER PROFITABILITY.

Strength and endurance without compromise.

The high-output TUCANO engines meet Tier 3 emission standards and have plenty of power reserves to ensure optimal performance even in difficult conditions.

Enlarged cooling system with automatic dust extraction.

The TUCANO combine is equipped with a highly efficient single cooling system for the engine, hydraulics and air conditioning. Enlarging the radiator compartment has significantly improved cooling efficiency. Automatic dust extraction ensures constant cleaning of the rotating radiator compartment and optimal cooling while protecting the working panels from contamination.

NEW: air intake system and air filter.

The air intake for the engine in the new TUCANO occurs behind the rotating radiator mesh. Thanks to pre-separation, the amount of dirty particles entering the two air filters is reduced. The filter capacity is designed to meet the needs of the new engine and has been significantly increased. These key improvements provide significantly longer maintenance intervals and reduced downtime.

4-TRAC all-wheel drive.

The TUCANO's hydrostatic transmission - clutchless, shiftless - is easily controlled using the multifunction joystick. This user-friendly control design immediately improves productivity by enabling faster turns and adjusting travel speed to suit changing operating conditions. Additional option: all-wheel drive. With a simple press of a button, you can turn on increased power, which will allow you to move forward with confidence, even in the most difficult conditions. All-wheel drive is absolutely reliable and does not require maintenance.

30% increase in traction on an all-wheel drive axle.

The new all-wheel drive axle is equipped with two central hydraulic motors, which are built into the axle and are characterized by significantly increased efficiency. The built-in design reduces the number of lines on the outside. Less dirt accumulates in high humidity conditions, minimizing the risk of damage to the hydraulic motor.

Enlarged tires for all-wheel drive axle.

To further increase grip in difficult conditions and reduce ground pressure, tire sizes 600/65 R 28 or VF 620/70 R 26 (TUCANO 580/570/450/440) are available. Both options can be combined with some 800 mm wide tyres.

Centralized lubrication system.

Thanks to the central lubrication system, almost all lubrication points are automatically supplied with the required amount of lubricant. You only need to specify the lubrication points and intervals once. Unlike manual lubrication of individual points, the lubricant is supplied from a central reservoir to the individual lubrication points.

Advantages:

• Reliable and controlled on-the-fly lubrication of all lubrication points;
• Increased service life of bolts and bearings;
• Cost savings due to lower lubricant consumption and wear;
• Reduced maintenance costs.

Tire technology for soil protection.

Tires improve mobility on the road. They provide increased bearing surface, improved traction, reduced slippage and fuel consumption, and reduced soil compaction by reducing tire pressure and therefore maintaining optimal soil structure.

EASY. SIMPLY MORE OPPORTUNITIES.

EASY stands for Efficient Agricultural Systems. The name matches the content: EASY simplifies work in all areas, from machine optimization with CEMOS AUTOMATIC, steering and fleet monitoring systems with TELEMATICS to farm management programs. This product allows you to perfectly coordinate all systems with each other and make the most of the capabilities of machines, operators and the enterprise as a whole.

Full control with one click.

The TELEMATICS system from CLAAS allows you to access machine information via the Internet at any time. Discover the new benefits of the TELEMATICS system.

NEW: Fleet View app.

With Fleet View, CLAAS now has an application that allows the logistics of transporting grain from combines to be coordinated so that downtime with a full bin can be reduced to zero. This application informs all machine operators in almost real time about the filling level of the bunker and the location of all machines in the fleet.

Optimization of work processes.

A report is sent daily via email containing runtime analysis and other important operational information. Before starting work, you can familiarize yourself with the results of the past day and evaluate the efficiency of the machine. In addition, the user can view a log of the combine's trajectory to optimize logistics. TELEMATICS allows targeted management of the machine and tractor fleet and avoids downtime.

Job management.

You can manage jobs in CEBIS. With the CLAAS AGROCOM MAP START software, you can prepare customer or site data that is launched and processed in the CEBIS system.

• After completing a task or working day, all data is saved;
• Data can be printed on the machine or transferred using a memory card;
• All data can be viewed and edited on a PC;
• CEBIS can also display and print meter readings by day, by crop type and overall productivity.

Yield mapping.

Using data from the job management system, the TUCANO combine allows you to map yields. Sensors in TUCANO measure grain yield and moisture content. The CEBIS system supplements these indicators with geographic coordinates using GPS satellite data.

All measured values ​​are saved on the mobile chip card. The included AGROCOM MAP START software also allows you to create yield maps, on the basis of which you can develop a future production strategy.

Automatic steering systems. More precision when steering.

CLAAS mobile displays provide flexible solutions for ISOBUS and parallel driving systems. The terminal can be removed from a tractor or combine and moved to another tractor or machine depending on the season and application. Order the equipped version of TUCANO directly from the factory or retrofit later, depending on your needs:

• S10: terminal equipped with a high-resolution 10.4″ touch display, with control and ISOBUS functions; display of up to four cameras;
• S7: terminal equipped with a 7″ high-resolution touch display with control functions.

Choose from three automatic steering systems.

All TUCANO models can be equipped with 3 automatic steering systems depending on the application.

GPS PILOT is a satellite system.

The advantages of GPS PILOT, in addition to the hydraulic control device, also include the GPS PILOT FLEX automatic steering wheel. This steering wheel will allow you to achieve maximum precision. An important advantage of the GPS PILOT FLEX system is its versatility.

• The hydraulic system is not involved;
• Quickly change the steering system between different machines.

The electric steering wheel transmits control commands from the terminal and navigation controller to the steering axle and thus steers the vehicle.

LASER PILOT is an electro-optical system.

Electro-optical LASER PILOT sensors use light pulses to detect the edge between uncut plants and stubble, automatically guiding the TUCANO along the edge.

The foldable LASER PILOT system is available for the left or right side of the header. The optimal position at the side near the edge of unmown crops provides a convenient viewing angle and high reliability even when harvesting lodged grain and on steep slopes.

AUTO PILOT - electromechanical steering system.

2 digital sensors in the cob picker detect the position of the TUCANO and guide it through the corn rows, ensuring optimal performance in all conditions. Thanks to this, AUTO PILOT contributes to increased efficiency and economy.

Help at the edge of the field.

The TURN IN function makes it easier to accurately position the machine on the track. When approaching the desired track, the automatic parallel steering system is activated at an angle of 90° (only to the direction of travel of the vehicle) or even 120° (if there is a field boundary). Thanks to TURN IN, the operator can fully concentrate on the functions of the mounted implement and guide the machine without having to worry about getting into the right track. TURN IN is included as standard in both terminals of the automatic parallel steering system (terminal S10/S7).

Automatic control even at the edge of the field.

The AUTO TURN function makes a turn at the headland. Its direction, as well as the next track to be processed, is pre-selected on the terminal; the rest is taken care of by the steering system.

CABIN. CONVENIENT WORKPLACE.

More spacious. Convenient. More efficient.

The TUCANO combine provides the operator with freedom of movement and excellent all-round visibility. A pleasant climate thanks to air conditioning, very low noise levels and a steering column that can be adjusted in three positions create first-class working conditions.

NEW: LED work lights and high beam work lights.

The lighting system provides the best visibility of the entire work area and machine components in the dark. Intelligent functions, such as light switch-off delay, complete the equipment package. H9 headlights and LED headlights will turn night into day.

• Up to ten working lights;
• LED high-beam work lights for long-range navigation in the dark;
• Lighting for folding attachments;
• Lighting of the side areas, stubble and rear axle;
• Automatic lighting of the unloading auger;
• Automatic reversing light;
• Lighting of the cleaning system, grain bin and exit;
• Service lights under the side hoods;
• Portable work light

CEBIS. The machine operator is always aware of events.

The electronic system CEBIS is designed for information, registration, management and control. It features a clear and logical menu structure.

To monitor processes and conditions, just one glance at the CEBIS display: all the most important information about movement or field work is displayed on the screen. Warnings are accompanied by an audible signal and the display of a symbol with text.

Drum speed reducer,

Volume

Information on the volume of required lubricating (or other purpose) fluid in the unit:

Volume 1 liter

Motul selection

Motul products

Motul recommends the following products for the Claas Tucano 450 (Tier 3b) (2009 - )

MOTUL GEAR SYNT TDL 75W-90

MOTUL GEARBOX 80W-90

Below you can see a selection of MOTUL GEARBOX 80W-90 oils from our catalog; for more detailed information about a particular volume, follow the links below.

Transmission oil MOTUL Gearbox 80W-90 1 l.

Transmission oil MOTUL Gearbox 80W-90 60 l.

MOTUL HD 80W-90

Below you can see a selection of MOTUL HD 80W-90 oils from our catalog; for more detailed information about a particular volume, follow the links below.

Transmission oil MOTUL HD 80W-90 1 l.

Transmission oil MOTUL HD 80W-90 2 l.

MOTUL DS AGRI SYNT 10W-40

MOTUL DS SUPER AGRI 15W-40

MOTUL TRH 97

Below you can see a selection of MOTUL TRH 97 oils from our catalog; for more detailed information about a particular volume, follow the links below.

Transmission oil MOTUL TRH 97 5 l.

MOTUL TRH 100

These products are recommended for use under the following conditions:

Mode

— Normal

Intervals

—

Video

The standard equipment of the model includes multifunctional piping connections and a central fixation system, which ensures maximum operating comfort. For middle-class machines, the ability to work with Vario headers is usually not provided. Claas Tucano 450 is an exception in this regard. Another advantage of the model is the Auto Contour system (guiding the header), which is included in the basic package. By analogy with the Lexion series, the Klaas Tucano 450 combine is equipped with a header control unit with memory of operating parameters.

Free access to the adjustment mechanisms allows you to quickly reconfigure the machine for harvesting a specific crop, guaranteeing high operating efficiency. By enlarging the grain tank and fuel tank, the costs of unloading and additional refueling are reduced.

Claas Tucano 450 will be an excellent assistant for any agricultural enterprise. The combine does an excellent job of harvesting legumes, oilseeds and grain crops. The technical parameters of the model and the quality of processing are impressive, allowing us to clearly classify it as a leader in its segment.

Operational Capabilities

Thanks to free access to the adjustment units, the machine can quickly be adjusted to harvest and high-quality threshing of grains, legumes and oilseeds. Time lost for refueling and unloading finished products has been reduced due to the increased volume of the consumable fuel tank and grain bin.

The designers paid a lot of attention to the comfortable arrangement of the operator’s workplace. The combine is equipped with a heat- and sound-insulated double cabin with built-in air conditioning and panoramic glazing.

Along with the convenient arrangement of the main and auxiliary control elements, the driver’s workplace is equipped with a color monitor, which displays information about the operating parameters of the main systems and units.

A comfortable chair with a wide range of adjustments helps maintain good health and high performance of working personnel throughout the entire work shift.

"Claas" Mega 350

Klaas grain harvesters of this series are distinguished by high productivity, high-quality threshing and ease of maintenance throughout their service life. These machines have proven themselves well in large farms where, in addition to grains, other types of crops are grown - legumes, tall-stemmed and small-seeded.

Equipped with a Daimler Chrysler OM 906 LA engine, which, when the turbocharging function is turned on, is capable of delivering 170 kW. The bunker is completely unloaded in less than 2 minutes.

Advantages:

• wide-cut reaping unit;
• transverse-longitudinal copying of the relief of the underlying surface;
• “APS” technology, which consists of accelerated feeding of spikelets into the main drum and an increase in centrifugal force;
• the separation zone is twice as large as Mega 208;
• reverse of the reaping part for cleaning without manual intervention;
• work with an alternative header with a 6.6 m gripper;
• hydraulic transmission with 3 speed stages;
• fast transport speed of 24 km/h;
• comfortable cabin with air conditioning, temperature heating functionality and on-board computer;
• Possibility of operation in areas located at an angle of up to 20 0.

Specifications:

• Power – 230 hp;
• Fuel consumption – 8 l/ha;
• Gas tank – 0.4 m3;
• Granary – 7200 kg;
• Unloading – 72 l/s;
• Weight – 11 tons.