Spare parts catalog MAN spare parts, online spare parts catalog man

general information

Explanation of engine designation

Crankshaft and connecting rod bearings, as well as pistons and cylinder liners, have finishing grades.
The finishing units are identified on the type plate, for example: H = crankshaft - crankshaft bearing NI or NII

2. Cylinder diameter:

4. Number of cylinders:

6 – six cylinders

L – with supercharging and intermediate cooling of charge air

6. Engine installation location on the car:

..F – truck with a cab above or in front of the engine and left-hand controls

Example: D2866LF16 – 294 kW/2000/-61% Nox (Euro 2)

Note

In the technical characteristics, only the letters of the 5th to 8th classification characteristics are used to distinguish them.

The following D28 series engines are installed on MAN TGA trucks:

The in-line six-cylinder engines D2866LF.. and D2876LF.. have displacements of 12.0 and 12.8 liters, respectively. They comply with Euro 2 or Euro 3 environmental standards

The engines of this series are designed according to the principle of aggregation, in other words, engines with different power characteristics are built according to the same design principle using, if possible, identical units. The main common feature is replaceable wet cylinder liners and individual cylinder heads.

The 4-valve cylinder head is a separate diametrically opposed cylinder head with cast-in swirl intake and exhaust ports, seated intake and exhaust valve seat rings, and press-fit valve guides.

The cylinder head is secured with six high-strength Torx flange bolts. The coolant is directed through the cylinder head from the exhaust side to the intake side in a cross flow.

Cast guide ribs ensure optimal coolant flow. The bridge between the exhaust valves is cooled by a cast channel.

Each cylinder head has two intake valves (9) and two exhaust valves (8) in a suspended structure.

All valves are driven by a carbide pushrod, push rods and a forged rocker arm (10).

The transmission of force from the rocker arm to the intake/exhaust valves is via a flared base adjusting screw (12) and a valve rod (13) passing through the ends of the valve stem.

The exhaust bridge contains an EVB engine brake mechanism. The rocker arms rest on the rocker arm axles, which are pressed into the rocker arm support housing.

The rocker arm support housing (11) is attached together with the cylinder head to the crankcase using a threaded connection.

The cylinder block and crankcase are cast as one piece. Light alloy pistons have two compression rings and one oil control ring.

The crankshaft is a forged part and is equipped with seven support bearings.

For each piston/connecting rod, counterweights are installed on the crankshaft. The connecting rods are made according to the principle of oblique division.

In the engine timing mechanism housing, on the flywheel side, the rotational movement of the crankshaft is transmitted to the oil pump and camshaft through a gear located on the crankshaft.

Where is the VIN code for MAN?

People, help: Where is the VIN code for this vehicle? I looked all over the frame and couldn't find it.

Comments 8

I have it on the right on the L-ke, you lift up the cab and you can see it above the wheel.

The cabin does not rise for a pregnant woman. Sometimes you can’t find the number behind the stabilizer bar right away, but it’s still in the area of ​​the right front wheel.

Pregnant MANs should also be behind the right front wheel.

Behind the front right wheel. Clean the frame. Turn the wheel to the right and clean it

And not behind the front right one on the frame? Usually with the Germans there, that’s how it happened in my Mercedes)

I looked, no. The frame on this car is painted, apparently the VIN was painted over, but I don’t know where it is on such cars

As far as I know, on all my trucks it was on the frame in the area of ​​the right wheel

I looked, no. The frame on this car is painted, apparently the VIN was painted over, but I don’t know where it is on such cars

Vehicle license plate details

When submitting an application for compensation, ordering spare parts or communicating with the service center, the user must provide the correct and complete license plate details of the vehicle. The required vehicle registration details are as follows:

Vehicle identification number:

Date of issue: __________________________________________________________________

(I) Car model

Nameplate location

(II) Engine

Engine nameplate location

The engine nameplate is located on the housing under the air compressor (see Fig. 1-4 and Fig. 1-5).

Source

Where is the car engine number and what is it for? 6 possible locations

The engine code is a piece of information that is unique to each vehicle. Although the code is used extremely rarely, every motorist needs to know where the engine number is located. Although this information will not help when purchasing spare parts, as well as various types of diagnostics, it will protect you from purchasing an illegal car.

Previously, the engine number was important information that was indicated in the registration certificate. Since 2011, this information is no longer displayed in the document, but is still of great importance when re-registering a car. In each make of car, the code on the engine is located in different places, so it is important to know where the engine number is to find it faster.

Advantages of MAN spare parts from

The original MAN spare parts offered by us are distinguished by the following obvious competitive advantages:

• The MAN catalog contains the largest assortment in the country;
• spare parts for MAN are sold at the lowest prices (savings of up to 30%), which is due to a reduction in trade and logistics costs due to direct deliveries from the product manufacturer;
• delivery of MAN spare parts is carried out in the shortest possible time;
• Manufacturer's warranty for all products from the MAN catalogue.

Thus, the MAN spare parts catalog allows our customers to quickly receive original products at the most reasonable prices. This is what allows us to regularly expand our customer base and geography of supplies. And the best reward for working as a domestic supplier of components, including MAN spare parts, is the positive feedback from our customers and their willingness to continue their cooperation with us on a long-term basis.

Why do you need an engine number?

Despite the contradictory information that is distributed on the Internet, the engine number is mandatory when selling a car and re-registering it with the MREO (read about how to restore a vehicle registration certificate).

This information is no longer indicated in the PTS, but the data is entered into the database, so it is important to know where the engine number is stamped and to have all the documents confirming the legality of its installation.

The VIN code rarely contains information about the engine, but almost all cars have information about the model and year of manufacture, making it easy to determine the engine modification. Some car brands immediately indicate information about the engine model in the VIN code.

These brands include:

You can read more about how to check a car by VIN code on various resources in our expert’s article.

Additionally, we recommend reading the material on how to find and decipher a car’s VIN code.

When reinstalling the engine, it is recommended to install the same model and modification as it was before, due to the fact that when checking at the MREO, inspectors may have additional questions that will complicate the re-registration procedure.

The marking on the engine is the only code that cannot be destroyed or interrupted even if the engine loses its functionality. The code determines the owner of even burnt-out cars.

MAN spare parts catalog

The range of MAN spare parts presented in the Ati-Auto.ru online store is the widest in our country. This is due to direct supplies of spare parts to MAN from the manufacturer and our internal policy aimed at maintaining constant, irreducible stocks in warehouses located in 8 cities of the Central Federal District.

To make it easier to select MAN spare parts from the list of product items, the service involves using a filter by year of production of vehicle models. This makes it possible to work with the MAN spare parts catalog, spending a minimum of time. In addition, the MAN catalog is equipped with a “Quick Order” option, which allows you to fill out an application by filling out only a few fields with contact information and product information.

Spare parts for MAN in the fullest range are in high demand in all regions of the country, which indicates the undoubted advantages of this particular choice.

What could the code be?

Different manufacturers specify a different number of letters and numbers in engine codes, which makes them completely unique. Domestic manufacturers indicate a code mainly of 6-7 digits. On foreign cars, the individual code can even consist of 18 characters. The full code was previously indicated in the PTS, so it is important that it completely matches the one applied to the engine. If the engine has been reinstalled, it is recommended to carry supporting documents on all trips.

You might also be interested in an article that talks about ways to get beautiful license plates for your car.

MAN spare parts

General information about spare parts for MAN

The European automobile concern MAN, headquartered in Munich, was founded in 1758 and is an open joint-stock company in which the main shareholder (more than 75%) is Volkswagen AG.
Currently, the company's enterprises located in many countries around the world employ almost 54 thousand employees. Today, MAN spare parts belong to one of the most important categories of goods offered by MAN, due to the existing high demand for them in our country. Original spare parts for MAN are distinguished by high reliability and performance properties. The definition of “German quality” fully applies to them. Therefore, supplying spare parts for MAN is one of our main activities.

Engine MAN D2866

The MAN D2866 diesel engine series is available in two versions: D2866 2V and D2866 4V. The design of 4-stroke engines in this series has 6 cylinders. The engines use a direct injection system, which has many advantages. MAN D2866 engines are equipped with an exhaust turbocharger with an intermediate cooling system. The engines of this model use ordinary water as a coolant.

MAN D2866 2V are motors designed for industrial use and installed in electricity generators. According to the type of load, generators must be classified as LTP units (Limited Time Power), that is, operate in the so-called backup mode, which allows them to be used up to 500 hours per year at variable power and 300 hours in a row (with maintenance breaks) without overloads .

MAN D2866 4V is a motor version that is intended for use in generator sets of the PRP (Prime Power) classification type. This type involves the continuous use of a generator to generate energy for an unlimited number of hours per year. Such generators are able to withstand overload, unlike the LTP type. True, only by 10% of the permissible power and no more than once every 12 hours for a duration of no longer than one hour.

The volume of the MAN D2866 4V is 11.9 liters. The weight of the engines is 1180 kg, and the power they generate, depending on the modification, is 280 or 322 kW. The maximum torque of engines in this series is 1782 Nm or 1708 Nm, depending on the configuration.

The working volume of the MAN D2866 2V engines is also 11.9 liters. Depending on the modification, the rotation speed can be 1500 rpm (50 Hz) or 1800 rpm (60 Hz). In accordance with this, the generated power reaches 360-400 kW.

D 2866 LF34 - 6-cylinder in-line water-cooled engine, produced since 1998. Engine power is 310 hp. (228 kW) with an engine capacity of 11967 cc.

Description of the D 2866 LF34 engine

The lineup

Engine MAN D0836

The MAN D0836 engine family is used in buses and trucks. Engines of this type are successfully used and have positive responses due to their high specific power and weight indicators.

A distinctive feature of the motors of this series is their high power density with relatively low weight. The working area of ​​MAN D0836 engines is 6.9 liters, and their maximum power is 326 hp. Thus, the specific power reaches 47 hp/l - this is a very good indicator.

Another feature of the MAN D 0836 engines is their extremely low noise emission level. This allows you to save significant money due to the absence of the need to carry out soundproofing measures and the unnecessary purchase of soundproofing materials.

Instructions for the MAN D0836 engine (PDF, 8 MB, in Russian)

Specifications

MAN engines of the D0836 series are diesel 4-stroke vertical engines with direct injection, turbocharging and intercooling. These models use a power supply system with a high-pressure displacement pump that supplies fuel to the injectors that inject fuel into the engine cylinders (Common-Rail system), and a common high-pressure fuel line. To achieve the EURO-4 environmental standard, the engine is equipped with a two-stage turbocharger and an external controlled exhaust gas recirculation (EGR) system.

1. air temperature sensor in the intake manifold;
2. coolant temperature sensor;
3. engine identification plate;
4. exhaust gas recirculation proportional control valve;
5. crankshaft speed sensor;
6. engine control unit EDC7/32;
7. starter control relay;
8. starter;
9. air recirculation system harness connector;
10. additional oil pressure sensor;
11. Oil filter;
12. oil temperature sensor;
13. oil pressure sensor;
14. low pressure fuel priming pump;
15. high pressure fuel pump;
16. air heater activation solenoid valve

1. air cooler (cooling system fluid);
2. high pressure turbocharger section;
3. generator;
4. generator;
5. oil indicator (dipstick);
6. fan drive hydraulic pump;
7. compressor;
8. oil pan;
9. power steering pump;
10. low pressure turbocharger section

1. generator drive pulley;
2. guide rollers;
3. thermostat cover;
4. air heater spark plug in the intake manifold;
5. boost air pressure and temperature sensor;
6. fuel pressure sensor in the supply system;
7. fuel coarse filter;
8. fine fuel filter;
9. oil filler neck;
10. fuel heating element in the filter;
11. water pump;
12. water pump pulley;
13. crankshaft pulley;
14. fan hydraulic pump drive belt;
15. tension roller;
16. fan hydraulic pump pulley;
17. power take-off pulley on the camshaft;
18. speed and camshaft position sensor;
19. oil indicator (dipstick);
20. tension roller;
21. generator drive pulley;
22. guide rollers;
23. water pump and generator drive belt

Explanation of marking D0836