Briefly about the manufacturer
Ivanovets truck cranes are produced by the Ivanovo Machine-Building Plant - the oldest enterprise in this field in Russia. The plant was launched in 1950, with the addition of additional capacities after 1975, including branches from the cities of Galich, Drogobych, Kamyshikha, Balashikha, Stavropol and others. Later, the Galich plant again returned to the status of a separate enterprise.
After experiencing bankruptcy in the 90s, the plant restored production and became part of the Ivanovskaya Brand group. However, in 2016, the company suffered another crisis and a production stop. After the change of ownership, the new owners paid off their debts, and the Ivanovo Autocrane Machine-Building Plant began production again.
Description and scope of application, prices
Using the Ivanovets crane, you can carry out work on loading and unloading certain contents at a fully automatic level . The following design advantages stand out:
- The ability to rotate the structure further than similar devices.
- Installation of telescopic booms in a rigid version.
Using a truck crane in construction
This crane is involved in installation and construction work. This device can be used on sites with a high degree of occupancy. The crane has a convenient chassis, so you can move this device to any place.
The design and protective modules of the device are designed for use in temperatures from -40 to +40. If the ambient temperature drops below this indicator, all changes are recorded in advance. Workers are informed about the need for downtime, since machines cannot carry out work activities in severe frosts .
They are located in non-working form:
- At temperatures from -40 to -50 degrees, it is possible to place these devices in an open and even poorly heated area.
- When the temperature drops below -50 degrees, it is necessary to select a room for installing the crane where it is possible to shelter from bad weather, keeping the car in good condition.
There is a certain range of conditions that determine the safety of a crane . An elevation of 10 m is used to take measurements:
- Wind gusts are up to 40 m/sec.
- The operating mode occurs in a measured state, no faster than up to 14 m/sec.
- The area of the area when performing work is no more than 5% from the planned one.
- If a decision is made to use outriggers, their horizontal tilt level cannot be more than 1.5 degrees.
The video shows an Ivanovets 25-ton truck crane in operation.
The price of the device depends on the chassis used, so it can range from 5.8 to 6.9 million rubles. Renting a crane for 8 hours will cost the developer 12,000-17,000 rubles.
Find out the prices and characteristics of MTZ tractors here.
Specifications
The Ivanovets 25-ton truck crane is classified as a small-scale vehicle. The main driving force for lifting loads is a through rod, which has a structure divided into three lobes . The device has a telescopic structure. Sometimes a set of extension equipment is used, organized in a 7 m piece.
The carrying capacity of a model depends on several parameters, so many related indicators constantly vary:
Extendable boom supports
- When work is carried out on an extended boom support of 9 m and a reach of 3 m, these parameters are considered optimal, so the standard lifting capacity is 25 tons. If you plan to transport substances containing elements that can explode, as well as toxic objects, this should be reduced indicator up to 20 tons.
- When structural elements are retracted to transfer the optimal load from the device to the surface, the permissible value is reduced to 6.3 tons .
- Sometimes a decision is made to extend the supports and use a boom 21 m long with an outreach of 8 m. In this case, the situation of managing the necessary items is considered difficult, so you can take no more than 1.95 tons of cargo.
- If during operation it is planned to extend adjacent sections, the weight placed on the crane structure cannot exceed 300 kg.
The maximum value of the load moment for elements with a boom length of 9 m is 735 (75) kNm. These parameters are relevant for a length of 21 m with jib – 153.
If a conventional boom design is used, the vehicle is capable of lifting no more than 21.3 tons, despite the fact that its length is the standard 21 m. The lowering depth of the structure at a minimum length is 15 m .
Load capacity and dimensions of front loaders in this article.
The main competitive advantages of Ivanovets truck cranes
Ivanovets truck cranes have the following competitive advantages:
- universality of technical characteristics;
- reliability when using an ovoid boom design that optimally distributes static and dynamic loads;
- safety of use;
- simplicity of the design;
- high quality due to strict adherence to technical regulations.
An extensive dealer network ensures service and availability of spare parts.
