Liebherr truck cranes with a lifting capacity of 50, 70, 100, 130, 160, 200 tons. Liebherr crane - technical specifications.

Both enterprises and individuals can order a 70-ton Liebherr LTM 1070 truck crane from our company. Simply enter into an agreement with us with a list of services and a payment method convenient for you - cash, bank transfer, with or without VAT. Also be prepared to dictate the following information to our operator:

• address of work;
• the weight of the load and the height to which it needs to be lifted (if you order a crane);
• features of the site and entrances to it.

Accurate selection of special equipment is the key to quickly completing work at minimal cost. Our company can offer units for a wide variety of types of work and, if necessary, will send a specialist who will help you decide on the spot which crane or excavator is best to order and how long it will take to complete the task.

Please note: for work in the center of Moscow and within the third transport ring, a special pass is required, and this nuance must also be agreed upon with our representative.

Truck crane "Liebherr LTM 1070" 70 tons for rent from us - a guarantee that everything will be done quickly and efficiently. The key to this is vast experience in operating in Moscow and the Moscow region, a large fleet of special equipment and the well-coordinated work of a team of competent specialists.

Review and application in practice

The manufacturer offers a large selection of Liebherr mobile pneumatic wheeled and crawler cranes, among which are the following:

• mobile units of the LTM series: 1030-11200;
• small-sized devices of the LTC series: 1050;
• construction vehicle mechanisms with a telescopic boom of the LTF series: 1045 and 1060;
• Liebherr pneumatic wheeled cranes with lattice boom LG series: 1750;
• all-terrain short-wheelbase vehicles of the LRT series: 1090 and 1100;
• tower cranes Liebherr 132 EC-H8 with fixed tower and beam jib.

Crawler crane models include the LR and LTR series with a telescopic boom. The maximum lifting capacity of the equipment is 3000 tons.

The most common model among users is the Liebherr LTM truck crane with a large ballast radius and an all-terrain all-terrain chassis, which affects its mobility and guarantees movement even on unpaved roads. Thanks to VarioBallast technology, the device can be used in tight and confined areas at night.

Liebherr self-propelled cranes are equipped with powerful Liebherr turbodiesel engines with minimal emissions of harmful substances.

ZF gearboxes are automated and economical. The following factors influence this:

• a large number of switching speeds and a dry clutch lead to lower fuel consumption;
• the presence of a 2-speed gearbox on LTM cranes with 3-5 axles allows you to reduce the slow motion speed and increase maneuverability;
• ZF-TC Tronic gearbox with installed torque converter on LTM models;
• ZF 6WG gearbox under load in folded state and installed converter on LTM and LTC with 2 axles;
• a large number of driving axles.

The braking system is characterized by instant response, smooth braking and reduced performance.

The axles are equipped with Niveaumatik hydropneumatic adjustable suspension, which increases the axle load and improves lateral stability when turning.

About the manufacturer

In 1949, Swiss engineer Hans Liebherr headed his parents' construction company in Germany.

In the post-war years, the country was sorely short of equipment for housing construction, then Hans and a group of designers created their first quickly erected slewing tower crane .

At the same time, Liebherr founded a machine-building plant in the German city of Kirchdorf an der Iller for serial production of these machines.

This is how the Liebherr family business was born. Gradually mastering different areas of industry, the company built more and more factories and representative offices around the world, today there are already more than 130 of them.

In 2011, a plant was launched in Russia in the Nizhny Novgorod region.

The group of companies produces different types of equipment. The holding produces mining, mine, port equipment, marine cranes, concrete transport, concrete mixing, refrigeration/freezing equipment, aircraft parts and aerospace equipment.

The group of companies has paid the greatest attention to construction equipment since its founding.

Liebherr 40 tons

The Liebherr LTM-1040 model is designed for a load capacity of 40 tons. The frame is made of high-strength fine-grained steel and has a rigid spatial structure.

The car is equipped with a 6-cylinder Mercedes-Benz turbodiesel with a power of 286 hp. liquid cooling.

The length of the 4-section telescopic boom varies between 10-35 m. The mechanism extends steplessly using a hydromechanical telescoping system.

Machine performance:

• crane travel speed - 80 km/h;
• maximum lifting height - 39 m;
• overall dimensions in structural design - 3600x6000x10490 mm;
• weight - 24 tons.

Liebherr 70 tons

The LTM-1070 tower crane features 14.5t ballast, Liccon-2 safety and performance testing, active steering, hydraulic safety and shut-off valves and air brakes.

Installation of the extension cord is carried out in 4 modes:

• folding 2-section with a base length of up to 16 m at an angle to the boom from 0 to 60°;
• hydraulically adjustable folding with a length of 9-16 m and an angle change of 0-60°;
• mechanical mounting 3.2 m with working angles 0°, 20°, 40° and 60°;
• hydraulically adjustable mounting 3.2 m with angles 0-60°.

The telescopic boom of the crane can be extended from 11 to 50 m.

The machine is equipped with a Liebherr water-cooled turbodiesel with a capacity of 408 hp. With.

Overall dimensions - 3900x6300x12409 mm.

The weight of the machine is 48 tons.

Liebherr 100 tons

Models LTM-1090 and LTM-1100 are designed for 100, 95 and 90 tons and belong to the group of 4-axle cranes. The telescopic boom up to 60 m is equipped with lattice sections and a 2-section jib. The maximum lift height is 91 m.

For the Liebherr 100 ton truck crane, the operating parameters are as follows:

• engine - Liebher;
• power - 476 hp;
• lattice extension - 10.8-33 m;
• travel speed - 85 km/h;
• total ballast - 28.2 tons;
• machine weight - 60 tons.

Liebherr model range

LTM - telescopic cranes on off-road chassis. In addition to the fact that the machines can pass on any ground (this is not uncommon on our construction sites), they also have high speed when driving on the highway. The most powerful telescopic crane in the world is the Liebherr LTM 11200-9.1 truck crane (Liebherr 1200 ton truck crane).

LTF - construction taxi cranes, differ in that they can move loads without extending and fixing additional outrigger supports. A crane that arrives at the site is immediately ready to begin work, which gives them a tangible advantage in the case where the crane’s operating mode does not require constant presence in one place, but requires constant movement to perform short-term work.

Automotive cranes from a German manufacturer can be divided into several groups:

• with a lifting capacity of 35-40 tons;
• with a lifting capacity of 50 tons;
• with a lifting capacity of 70 tons;
• with a lifting capacity of 100 tons;
• with a lifting capacity of 200 tons;
• with a lifting capacity of 300-500 tons;
• with a lifting capacity of 1200 tons.

40 tons

There are three machines in this category: LTM 1030-2.1, produced since 1997, LTM 1040-2.1 and LTM 1045-3.1.

The first self-propelled crane equipped with data bus technology. The maximum lifting capacity of the LTM 1030 model is 35 tons with a boom radius of 3 m. It is equipped with a telescopic boom with a maximum lifting height of 30 m. An additional jib up to 15 m is available.

The LTM 1040 has a lifting capacity of 40 tons with a reach of 2.7 m. The machine is equipped with a telescopic boom with a maximum lifting height of 35 m and an additional jib of 9.5 m. The LTM 1045 with a lifting capacity of 45 tons with a reach of 3 m is equipped with a telescopic boom with a maximum lift height lift 34 m. The lattice extension increases the total length of the working body by a maximum of 16 m. The machines use Daimler-Benz engines and branded Liebherr units.

50 tons specifications

• LTM 1050-3.1 - lifting capacity of 50 tons with a three-meter boom reach. Telescopic boom

• provides lifting of the load to a height of up to 38 m. The lattice extension increases this figure by another 16 m.
• LTM 1055-3.1 - lifting capacity of 55 tons with a boom radius of 2.5 m. Equipped with a telescopic boom with a maximum lifting height of 40 m. Additionally, a jib with a maximum length of 16 m is supplied.

70 tons

The self-propelled all-terrain vehicle LTM 1070-4.1 comes with a telescopic boom 11-50 meters long and a lattice extension 9.5-16 meters long. The maximum lifting capacity of the machine is 70 tons with a boom reach of 2.5 m. The equipment is equipped with a 270-kilowatt Liebherr engine.

100 tons technical specifications

• LTM 1090-4.1 is an economical truck crane with a dual-engine power generation system. Load capacity

  
  equipment with a boom reach of 2.5 m is 90 tons. The telescopic boom included in the kit ensures lifting of cargo to a height of up to 50 meters. The lattice extension increases the length of the working body by 10.5-26 meters.

• The LTM 1095-5.1 is a five-axle crane with the longest telescopic boom in its class at 58 meters. The maximum lifting capacity of the equipment with a boom reach of 2.5 meters reaches 95 tons. The delivery set includes a lattice extension 10.5-26 meters long. The car is equipped with a six-cylinder Liebherr turbodiesel.
• The LTM 1100-4.1 is a four-axle mobile crane recognized as the most powerful on the market. The design implements the possibility of forced control of the rear axle of the machine. The maximum lifting capacity of the 1100-4.1 is 100 tons with a boom radius of 2.5 m. A telescopic boom 11.5-52 m long and an extension 10.8-33 m long are included in the delivery package.
• LTM 1100-5.2 is the most compact self-propelled crane with a lifting capacity of 100 tons. The maximum indicator is provided with a boom radius of 2.7 m. Active axle control remains in the list of equipment capabilities. The model is equipped with a telescopic boom 11.5-52 m long and an extension 10.8-33 m long.
• LTM 1130-5.1 - maximum lifting capacity of 130 tons with a boom radius of 3 meters. The kit includes a telescopic boom 12.7-60 meters long. The jib increases the maximum lifting height by 10.8-33 meters.
• LTM 1160-5.1 - maximum lifting capacity of the machine is 160 tons with a boom radius of 3 m. It is equipped with a telescopic boom 13.2-62 m long and a jib 5.4-43 m long.

200 tons technical specifications

• 
  LTM 1200-5.1 - load capacity 200 t at 3 m reach. Telescopic boom length 13.2-72 m. Extension - 5.4-43 m.

• LTM 1220-5.2 - lifting capacity of 220 tons with a three-meter reach. The set includes a telescopic boom 13.3-60 meters long and a lattice extension 12.2-43 meters long.
• LTM 1250-6.1 - maximum lifting capacity of 250 tons with a 3-meter reach. The set includes a telescopic boom with a maximum lifting height of 72 meters and an extension with a maximum length of 70 m.

300-500 tons

• LTM 1300-6.1 - maximum lifting capacity of the telescopic boom is 300 tons at 3 m reach. The length of the arrow is 15-60 meters. Extension cable - 10.5-70 m.
• LTM 1400-7.1 - a maximum lifting capacity of 400 tons is provided with a boom radius of 3 meters. The set includes a telescopic boom 15.4-60 meters long and a lattice extension 7-84 meters long.

• 
  LTM 1500-8.1 is the owner of the world's longest telescopic boom with a maximum lifting height of 84 meters. The maximum lifting capacity of the equipment is provided with a reach of 3 meters. The kit includes a lattice extension with a length of 14-91 m.

750 tons

LG - high-capacity cranes with a lattice boom. New 750 ton self-propelled lattice boom crane. The company has expanded its range of heavy mobile cranes with the LG 1750 lattice boom crane. It combines the wide range of equipment of a 750 tonne crawler crane with the mobility of a fast moving truck crane in the same lifting capacity category. For the LG 1750, Liebherr used the slewing crane and jib system of the LR 1750 crawler crane, as well as a completely newly developed six-axle compact chassis with a modern design. Four very strong and large folding beams form a star-shaped support with a support base of 16 x 16 m. They dominate the appearance of this special crane chassis.

1200 tons

In the last category of heavy-duty cranes, the manufacturer presented one model LTM 11200-9.1. The maximum lifting capacity of the equipment reaches 1200 tons with a reach of 2.5 meters. The delivery set includes a telescopic boom with a length of 18.3-100 meters. The lattice extension increases the maximum lifting height of the load by 24-126 meters. The weight of the machine in transport position is 96 tons.

Today, the largest crane in the world is considered to be the Liebherr “LTM 11200-9.1” crane - MAMMOTH. This is a self-propelled jib crane, which is produced by the German company Liebherr. This crane is self-propelled and has a telescopic boom, which is mounted on a special chassis. In addition, this crane boom is also the tallest boom in the world.

Just think about it : it is capable of lifting a load weighing 1200 tons to a height of 180 meters. This is 7 passenger airliners lifted at one time to the height of the 60th floor! The height of the Mammoth is 2 times higher than the Statue of Liberty.

This is interesting: Truck-mounted concrete pump from the German company Putzmeister

Liebherr 200 tons

Liebherr 200 ton truck cranes include the following models:

• LTM 1160 for 160 tons;
• LTM 1200-1250 with extended extensions.

Liebherr 200 tonne crawler cranes are developed using advanced technologies:

• self-assembly and trawl loading systems;
• Derrick designs with suspended counterweight;
• LiDAT is a data transfer mechanism.

The 250 ton crane is equipped with a 230 kW turbo engine. The vehicle speed is 1.6 km/h.

Market positioning and pricing

Due to the fact that the company has production in the Russian Federation, you can buy a Liebherr truck crane in your homeland. The equipment successfully competes both in price and even more so in quality with the products of domestic machine builders. In fact, Liebherr truck cranes are the most popular and widespread self-propelled cranes in Russia, produced by a foreign company. All this has been achieved with high performance characteristics and reasonable cost (only 10 - 20% higher than Russian cranes).

Number of reviews Leave a review

Sort by:

Be the first one to leave a review.

show more

Leave feedback

LTM 1100, 1200, 1300

Liebherr LTM 1100, 1200 and 1300 mobile cranes have lifting capacities from 100 to 300 t.

For the Liebherr LTM 1100, the technical specifications are as follows:

• telescopic boom - 11.5-52 m;
• extension cord - missing;
• engine - 370 kW;
• travel speed - 80 km/h;
• counterweight weight - 35 t;
• machine weight - 60 tons.

The Liebherr 1300 crane differs from the 1100 model by the presence of a boom extension and a more powerful diesel engine. The weight of the counterweights is 112.5 tons.

The Liebherr LTM 1200 truck crane has a lifting capacity of 200 tons with a reach of 3 m.

The particularly powerful and heavy Liebherr LTM 11200 tower cranes on a 9-axle chassis with a lifting height of 188 m are designed for 1200 tons. The Liebherr LTM 1050 crane is simpler and more convenient in the line.

Rent a Liebherr 50 ton truck crane

Crane 200 tons, LIEBHERR LTM 1200 -5.1

Rent a crane 200 tons – LIEBHERR LTM 1200

Load capacity 200 tons, boom length 72 m: this is a Liebherr LTM-1200-5.1 truck crane

Situations when it is necessary to mount a structure to a great height, move it a considerable distance, or lift a load of significant weight occur quite often. Today there is a fairly simple way out for this - renting a 200-ton truck crane for a short period of time will solve such issues. There are several types of mobile lifting devices that can handle such weights, but the most suitable for Russian conditions is the five-axle German truck crane Liebherr ltm 1200 with a seven-section telescopic boom having a length of 13.2 to 72.0 m.

Capabilities of the Liebherr ltm 1200 crane when lifting and moving loads

• it is capable of lifting a load weighing 200 tons with a boom length of 13.2 m to a height of 12.5 m with an outreach of 3.0 m, and with the same boom at an outreach of 10.0 m lifts a load of 62 tons;
• with the boom extended to a maximum length of 72.0 m, a 200-ton truck crane lifts a load of 10.6 tons to the maximum height for this model of 71.5 m with a boom outreach of 13.0 m;
• crane 200 has the ability to convey a load weighing 1.6 tons to a maximum distance of 66.0 m with a lifting height of 22.0 m.

The lifting characteristics of the liebherr 1200 make it possible to perform a large volume of loading and unloading, construction and installation work with large-sized and heavy loads in new construction, as well as during the reconstruction of buildings and structures. In addition, a Liebherr truck crane with a lifting capacity of 200 tons can be useful in eliminating emergency situations.

Compact and maneuverable truck crane with a lifting capacity of 200 tons

Liebherr 1200 crane

• with retracted outriggers;
• with a support base of 5.5×8.9 m;
• with a maximum support base of 8.3x8.9 m.

As a result of such liberality to working conditions, renting a 200-ton crane becomes quite possible even for work on construction sites with difficult conditions.

Renting or owning, which is more profitable?

Only powerful construction organizations with a large portfolio of orders for the construction of large objects can have their own heavy-lift crane. For the bulk of medium and small enterprises, renting a 200-ton truck crane is becoming the most acceptable form of lifting and moving heavy or oversized cargo. Maintenance and repair of such complex and expensive equipment requires not only premises, but also an appropriate machine park, as well as qualified personnel. Therefore, renting a 200 ton crane from enterprises that own a large number of truck cranes turns out to be cheaper than from those that own only 1 - 2 units of such equipment.

Maximum hook lifting height, m

– main boom 72 m

– main boom + jib 72+22 m

Rent a 200 ton truck crane by phone. and (925)772-84-85. Around the clock!

Cost of service for a Liebherr 50t truck crane Order a truck crane

Technical data of the Liebherr LTM 1050 truck crane

Liebherr truck crane: technical specifications

Truck-mounted cranes are considered one of the most popular types of equipment. The German manufacturer produces equipment based on its own automobile chassis. A series of machines received the LTM marking. Self-propelled vehicles are manufactured using advanced technologies and our own engineering developments.

The unique chassis system allows Liebherr truck cranes to move quickly on public roads. This feature saves builders time on relocating equipment from one site to another. Maneuverability is provided by a multi-axle suspension with independent wheel steering. The design of the running system provides the cranes with off-road capability and maximum mobility on construction sites.

In transport position on public roads, Liebherr truck cranes accelerate to 80 km/h. Features of the control system allow the crane operator to feel the movement of the chassis at any speed. Jewelry precision of work is ensured by the use of innovative mechanisms for controlling the operation of the boom. An engineering approach to the design of a truck crane allows the operator to control movements with a maximum error of several centimeters.

The attractive external design of the cars is accompanied by the comfort of interior decoration. The large glass area and the necessary safety, heating, air conditioning and ventilation systems guarantee minimal operator fatigue and, as a result, maximum labor productivity.

We provide Liebherr 50 ton truck crane for rent.

Renting a Liebherr 50 ton truck crane in Moscow is indispensable when performing a wide range of work: when working with medium and small loads during low-rise construction, as well as for various works related to loading, unloading and installation. This tap is often used when laying water pipes and heating system pipes.

From us you can rent a 50 ton crane both for one-time orders and for a long period. At the same time, renting a Liebherr 50 ton truck crane will be more profitable if you rent it for a period starting from several days, because We have a discount system.

A 50-ton truck crane can move freely in the city without obtaining a special permit, and the compact chassis of the crane makes it possible to carry out work even in cramped conditions of dense buildings. The dimensions of the crane are such that it can pass under bridges and overpasses. The crane has a three-section telescopic boom that can deliver loads to a height of 40 meters. The 50-ton truck crane can reach speeds of up to 80 km/h.

Renting such a 50-ton truck crane will allow you to carry out work in any weather, because the cabin is equipped with an artificial climate system. The advantages of this model are also high maneuverability and the constant presence of a boom extension and a full set of ballasts. According to many experts, the LTM 1050 truck crane from Liebherr is the best development in terms of price/quality ratio.

We provide this truck crane for rent in Moscow and other cities of Russia.

Full technical description

Specifications

Rent of a truck crane 200 tons Liebherr ltm 1200 5.1

Price: from RUB 144,000/shift

Technical characteristics Payment Delivery

With us you can only make cashless payments. We are always open to dialogue and ready to discuss your payment proposal.

Delivery is carried out throughout Moscow and the region. Its cost is calculated individually and depends on the following factors:

• crane type and weight;
• the difficulty of dismantling it;
• route features;
• transportation distance.

offers to use a service such as renting a 200-ton truck crane in Moscow. This is a completely new development from German manufacturers, which differs from analogues in good performance, impressive power and new design solutions. The model is equipped with the longest boom in its class - 72 meters.

Rent of a 200 ton truck crane is in demand:

• during the construction of various objects;
• when transporting large cargo;
• during the construction of overpasses;
• when loading and unloading heavy equipment;
• when lifting loads to heights and in hard-to-reach places.

The main advantages of the Liebherr LTM 1200 5.1 truck crane

• using a retractable telescopic boom, you can lift loads to the desired height and deliver them to hard-to-reach places;
• the crane can be used to move along street roads; it can drive under bridges and in tunnels;
• The engine is equipped with an automatic transmission with two rear speeds and twelve forward speeds. Maximum speed - 80 km/h;
• The crane operator's cabin has all-round safety glazing; it is comfortable and functional. Among the useful options are height adjustment of the steering wheel, air suspension of the seat, an electronic panel with the ability to instantly transmit a signal;
• good lifting capacity allows for various manipulations with cargo up to 200 tons.

Why should you choose our company?

Purchasing powerful self-propelled equipment is expensive and impractical. The most justified option is to use a service such as renting a Liebherr LTM 1200 5.1 truck crane from our company. For quite reasonable money you can carry out construction work with heavy loads.

offers:

• the possibility of concluding contracts for the required period;
• maintenance of equipment throughout the entire period of use;
• 24/7 customer service assistance;
• delivery of the crane to the work site.

You can get all the necessary information on payment, delivery and technical specifications by calling +. You can also leave a request on the website, and our specialist will contact you shortly. Renting a 200 ton crane is available to enterprises in the Moscow region at an affordable price.