Ural cars from the Chelyabinsk Machine-Building Plant have been known since the times of the Soviet Union. At first, they were created as army trucks, so the chassis of these vehicles was designed to withstand exorbitant loads and travel on almost absolute off-road conditions. According to reviews of military personnel who served in “hot spots” in all geographical latitudes, the Ural is one of the most passable and unpretentious vehicles to operate.
During the conversion process, military vehicles became civilian ones, but, as happened with many vehicles, they did not lose their qualities. They were skillfully converted for household needs. Modifications of the Ural with a diesel engine have become the base vehicle for more than 400 industrial installations.
Specifications
Chassis 43203 is a modification of model 4320 with an increased mounting base. It can carry cargo or superstructure weighing about 7 tons. In this case, the load on the front axle should not exceed 5300 kg. When installing the mechanism on the platform, this parameter must be taken into account.
Manipulator cranes based on the Ural are equipped with a standard 230 hp engine. In the design production version it is a turbodiesel. By special order, the engine can be installed with higher power - up to 250 hp.
The gearbox is a five-speed with a transfer case and is coupled with a center differential equipped with a lock. The total vehicle weight is 21,300 kg, excluding add-ons and installed units. Weight distribution - 5300 kg on the front axle, 16000 kg on the rear bogie. The steering is hydromechanical, only the front wheels turn.
| Load capacity | 12000 kg |
| Full mass | 21300 kg |
| Power | 230 l. With. |
| engine's type | diesel turbocharged |
| Engine capacity | 11.15 cc |
| Fuel tank, volume | 300 +210 l |
| checkpoint | mechanical |
| Wheelbase | 4555+1400 mm |
| Suspension (front/rear) | spring |
| Brakes (front/rear) | drums |
| Tires | 425x80/R21 |
Purpose and scope
MKM-200 is a multifunctional crane manipulator. The machine is designed to solve problems in the electric power industry: drilling wells for power and communication line supports, installing power lines, performing construction, installation and maintenance work at height. MKM-200 is also used for delivery, loading/unloading, lifting equipment, tools, materials, various long and large cargo.
The crane-manipulator is characterized by maneuverability and good cross-country ability, capable of consistently and efficiently performing tasks in the most difficult conditions. The design features of MKM-200 guarantee convenience and complete safety of work.
Additionally MKM-200 can be used for:
- driving screw piles and anchors;
- installation of bored piles;
- fulfilling the tasks of low-rise cottage construction;
- installation and repair of billboards;
- crowning trees and shrubs along power lines;
- road construction, etc.
Manipulators Ural
For various lifting operations, a crane manipulator based on the Urals is one of the most popular devices in construction sites, forestry and other areas of economic activity where access roads are far from perfect. The three-axle 6x6 chassis allows you to reach any object.
Ural with manipulator crane IM 240-04 can work with any type of load gripper. The lift consists of four retractable hydraulic sections. The maximum lifting capacity of the installation is 7000 kg with a boom reach of 12 meters. At maximum reach, the crane installation can lift a load of 1.7 tons to a height of up to 14 meters. If the load needs to be lowered below the axis of the machine, the lowering depth is up to 9.5 meters. The hydraulic boom is controlled from the ground using a remote control, or from the seat equipped with the lifting unit.
To maintain balance, the Ural crane manipulator is equipped with retractable hydraulic stops. The support base is 5890 mm.
Based on the Ural 4320 vehicle, the Swedish-Russian joint venture is installing a HIAB 288 EP-3 HiDuo crane manipulator equipped with an operator station. This is a powerful unit with a telescopic boom with a lifting capacity of 8.6 tons. The maximum boom reach is 22.4 meters with a load moment of 20 tons per meter. At maximum boom reach in a horizontal position, the crane manipulator can lift a load of about 500 kg.
The multifunctional crane manipulator on the Ural chassis is designed to work in difficult conditions with temperature ranges from – 50 to + 45 ° C. The vehicle's chassis allows it to go where any truck would stop. Therefore, these machines are indispensable in logging sites, pipeline routes, drilling sites, field camps and new buildings.
The total weight of the crane installation is 3.7 tons, the height in transport condition is 2.4 meters. In combination with an on-board vehicle, a multifunctional crane manipulator on the Ural chassis can overcome unevenness up to 60°, while the balance of the crane installation is not disturbed.
Manipulator cranes based on Ural4320 and 43203 are indispensable machines in extreme climates. Even in mid-latitude weather conditions, which are becoming increasingly common, these installations are unique for use in emergency situations and everyday work.
In most cases, the MKM-200 CMU is installed on such a model, however, the options do not end there.
Universal technical tool
The MKM-200 multifunctional installation on an all-terrain chassis is capable of performing a wide range of tasks, replacing four technical units - a flatbed truck, a truck crane, an aerial platform and a drilling rig. The main purpose is the laying of power lines, where the versatility is especially evident.
The crane loads several concrete pillars into the body; the cabin, with its two-row design, can accommodate a crew of 6 people. People and materials are brought to the site, where the machine extends additional supports and begins to drill a hole in the ground. Using a crane, the support is lowered into the hole and the installers, rising to its top in the cradle, stretch the power line wires.
Characteristics of the crane-manipulator MKM-200
| Telescopic boom reach, m: maximum: | 9,60 |
| Telescopic boom reach, m: minimum: | 1,32 |
| Boom lifting angle from horizontal, degrees: | 70 |
| Boom lowering angle from horizontal, degrees: | 30 |
| Column rotation angle, degrees: | 320 |
| Maximum torque on the drilling tool, kN*m: | 6,7 |
| Drilling diameter with standard auger, m: | 0.36 or 0.5 |
| Drilling depth with standard auger, m: | no more than 4.2 |
| Drilling depth with auger extension, m: | no more than 8 |
| Maximum reach during drilling, m: | 5,4 |
| Minimum reach when drilling, m: | 3,2 |
| Maximum load force on the working tool, kN: | 50 |
| Load moment, tm: | 14,8 |
| Load capacity at maximum reach, t: | 1,2 |
| Load capacity at minimum reach, t: | 4,0 |
| Loading capacity of the telescopic lift cradle, kg: | 250 |
| Maximum lifting height of the telescopic lift cradle, m: | 13,3 |
| Lift working sector, degrees: | 180 |
| Overall dimensions: length, width, height, mm: | 8900x2550x3900 |
| Basic chassis: | Ural 4320-0111-41 |
| Weight of transported cargo, tons: | 4,3 |
The drilling rig can produce holes with a diameter of up to 0.5 meters to a depth of 8 meters if an extended auger is used. The hydraulic drill develops a torque of 630 kilograms.
The transport capabilities of the vehicle are preserved - the body can carry loads weighing up to 4.3 tons. At maximum boom reach, the crane mechanism can lift up to 1.2 tons of cargo, and at minimum - 4 tons.
All working and auxiliary movements of the installation are carried out by hydraulic cylinders and hydraulic motors, which can be controlled from a remote control located near the crane column or from a remote control, which you can even take with you to the cradle for high-altitude work.
| BGM-11-01 | BKM-317A | BKM-534 | MBSH-519 | MKM-70 |
| BGM-13 | BKM-318 | BKM-541 | MBSH-539 | IDRSK-311 |
| BGM-1M | BKM-321 | BM-205D | MBSH-812 | PBKM-511 |
| BKM-1514 | BKM-515A | BM-811M | MBSH-818 | UBM-85 |
| BKM-2012 | BKM-516 | BM-831 | MKM-200 | URB-2M |
| BKM-2032 | BKM-531 | BM-833 | MKM-200K | URB-51 |
Multifunctional crane-manipulator MKM-200 : installed on a URAL 4320 all-wheel drive chassis, has a manipulator, drilling equipment, telescopic lift, cradle - a new direction in drilling technology for rough terrain. It is possible to install the MKM-200 on a 4x4 KAMAZ-4350 (43502) chassis, on a KAMAZ-43114 (6x6) chassis (model MKM-200K), as well as on a URAL chassis (6x6) with a large double 6-seater cab (model MKM-200 /50). MKM-200 is used in the electric power industry, electrification services of Russian Railways, mining and processing plants, construction organizations, energy services of housing and communal services and communications, and can be used for work on rough terrain in difficult weather conditions. The multifunctional crane-manipulator MKM-200 is designed to prepare the construction of pits, foundations, and helps maintain and repair power and communication lines. MKM-200 has a spacious body for transporting goods, performing unloading and loading operations, installation and construction work. MKM-200 has proven itself well in low-rise construction, for the installation of pile screw foundations, for the maintenance and installation of advertising structures, for emergency work on tree removal, and in road construction. The multifunctional crane-manipulator MKM-200 is equipped with various equipment: - drilling equipment intended for drilling and well construction, including a telescopic auger, sections for extending the auger, various drills; — lifting telescopic equipment, cradle for repairmen. of the MKM-200 crane has certain advantages: the ability to accurately position drills, the ability to drill several wells without moving equipment, and work in cramped conditions. The multifunctional crane-manipulator MKM-200 has unique technical characteristics of a combination of a drilling machine and a crane-manipulator and a lifting cradle. In our company Auto Export you can always buy a multifunctional crane-manipulator MKM-200 in different configurations with different technical characteristics. We offer the sale of the MKM-200 on credit or lease at a special price.
You can always place a purchase order or check the price for the MKM-200 multifunctional crane-manipulator by phone, and orders are also accepted through the “make an order” form. Video of the MKM-200 multifunctional crane-manipulator:
Systems
Technical indicators
| The name of indicators | MKM-200 |
| Crane equipment | |
| Load moment, t m | 14,8 |
| Maximum load capacity, kg | 4000 |
| Load capacity at maximum boom reach, kg | 1200 |
| Maximum telescopic boom reach, m | 9,6 |
| Maximum hook lifting height, m | 11,7 |
| Column rotation angle, degrees | 320 |
| Telescopic lift | |
| Working sector, degrees | 180 |
| Loading capacity of the cradle, kg | 250 |
| Maximum lifting height of the cradle, m | 13,3 |
| Drilling equipment | |
| Maximum torque on the drilling tool, Nm | 6700 |
| Drilling depth with a standard telescopic auger with a diameter of 350 and 500 mm, m | 3,9. 4,2 |
| Drilling depth with auger drill with a diameter of up to 500 mm, m | 8,0 |
| Drilling depth with an auger drill with a diameter of up to 630 mm, m | 5,0 |
| Drilling depth with auger drill with a diameter of up to 800 mm, m | 4,0 |
| Maximum reach during drilling, m | 5,4 |
| Minimum reach when drilling, m | 3,2 |
| Maximum load force on the drilling tool, kN | 50 |
| General technical specifications | |
| Basic associates | KAMAZ-43502 (4x4) KAMAZ-5350 (6x6) Ural-4320-0111 (6x6) Ural-4320-0911 (6x6, six-seater cabin) |
| Overall dimensions of the machine in transport position, mm, no more than length width height | 8340 / 8400 / 8900 / 9900* 2550 3900 |
| Total weight, kg | 12700 / 17000 / 17300 / 21300* |
| Weight of placed and transported cargo, kg | 400 / 3200 / 3600 / 7600 |
| Operating temperature range, °C | from minus 40 to plus 40 |
*parameters are given for the chassis in order of model specification
Do you want to buy a crane-mounted drilling machine StroyDorMash MKM 200 (buy MKM200, buy a hole drill MKM200, buy a drilling drill MKM200, buy a drill drill MKM200, buy a BKM MKM200), or do you want to find out more detailed information about this model? Contact our specialists and they will help you in the shortest possible time to select the equipment suitable for solving your problems at the best prices.
