Owners of wells, cesspools, sewers, sedimentation tanks and other artificial and natural reservoirs probably know that they are prone to siltation. Therefore, they must be regularly cleaned of sludge, as there is a risk of complete clogging, deterioration of water quality, which can harm your health, and so on. Some people prefer to carry out cleaning manually, which is quite labor-intensive and dangerous. Others use the services of a suction pump for this purpose.
Today there are quite a lot of different sludge sucking machines of foreign and domestic production. Russian businessmen prefer the latter, as they combine geographical and financial accessibility with sufficient functionality and quality. Today we will tell you what the KO 510 sludge sucker is, reveal its technical characteristics in comparison with other brands (KO-524, 530, 560, etc.), equipment and some features.
Sludge sucker KO-510
The KO-510 sludge sucker is designed on the basis of a ZIL automobile chassis and is intended for vacuum (mechanized) cleaning of wells, storm and sewer networks from sludge and its transportation to the disposal site. The special equipment of the sludge suction machine includes: tank, pneumatic system, driven vacuum pump, suction boom, hydraulic system, electrical system and additional equipment. The suction boom is controlled from a remote control. The operating principle of the sludge sucker is borrowed from vacuum machines. Due to its specificity, the sludge sucker tank is divided into two compartments - for sludge and for sludge water. The KO-510 package, among other things, includes a vacuum pump driven by a power take-off. The operator of the KO-510 sludge sucker, manipulating the boom, collects sludge from the well into the sludge compartment of the tank. The filling time of the KO-510 ranges from 3-6 minutes.
A distinctive feature of the KO-510 from other similar equipment is that the design of the tank allows the separation of sludge from sludge water, while the sludge water can be discharged under pressure back into the well and wash away the compacted sludge. The collected sludge is unloaded by tipping the tank. The lifting angle of the tank is 60 degrees. The sludge sucker can be operated at ambient temperatures from plus 40 to minus 20°C. The total capacity of the tank is 3.25 cubic meters. The depth of the well to be cleaned is 4.5 meters. The capacity of the water tanks is 20 liters. The maximum vacuum in the tank is 0.085 MPa. The productivity of the vacuum pump is 360 cubic meters per hour. Sludge sucking machines are in great demand among consumers due to their high level of performance.
KO-510 sludge sucker is produced by Kommash OJSC, which is one of the largest enterprises in Russia and the CIS for the production of municipal equipment. Over more than 70 years of operation, the company has accumulated vast experience in the production of municipal equipment. At the moment, the main products of the plant are vacuum, sludge pumps, sewer cleaning, sidewalk cleaning, watering machines, sand spreaders and garbage trucks, which are suitable for use in various climatic zones. The priority direction of the company's activities is the qualitative updating and increase in the range of products, expansion of the sales market and the search for partners with the aim of creating joint ventures for the production of municipal equipment. The company's products have become widespread and are in demand not only in Russia, but also beyond it in dozens of countries around the world.
the KO-510 sludge sucker is distinguished by a laconic design, a comfortable cabin with improved noise and vibration insulation properties. It is also noteworthy that since September 2008, a service center for servicing manufactured products began to operate on the basis of the manufacturing plant, meeting all requirements and certified. The company's service department has done a lot of work to organize service in all regions of Russia. Agreements have been concluded with 12 service centers that will be able to carry out warranty and post-warranty repairs, and will also provide spare parts for the KO-510 and other equipment. of the KO-510 sludge sucker are not the last reasons why you should buy the KO-510. The KO-510 sludge sucker has prospects for wide application in various sectors of the national economy.
Sales of KO-510 are carried out in our company. If you decide to buy KO-510, then contact us by phone numbers listed on our website in the “Contacts” section, or by email, the address of which is located in the same section. The company's managers will familiarize you in more detail with the technical and operational characteristics of this and other models of equipment, and will also provide the necessary information on the procedure for purchasing products from this manufacturer. KO-510 is sold to all regions of Russia with delivery in the shortest possible time, which is one of the reasons why it is worth buying KO-510 from our company. The company guarantees an individual approach to each client, which allows you to buy KO-510 on even more favorable terms. The price of the KO-510 sludge sucker is affordable for most potential buyers, and the quality is at a decent level.
content .. 11 12 15Sludge sucker KO-510 – ZIL-433362
The KO-510 sludge sucker on the ZIL-433362 chassis is used to clean wells and sewer systems from sludge accumulations and transport it to the unloading site. The special equipment includes a tank, vacuum pump with drive, suction boom, hydraulic, pneumatic and electrical systems and additional equipment. The suction boom is controlled from a remote control panel. Sludge is unloaded by tipping the tank.
| Wheel formula | 4 x 2 |
| Engine power, hp | 150 |
| Tank capacity, m3 | 3,25 |
| Depth of the well to be cleaned, m | 4,5 |
| Vacuum pump capacity, m3/h | 360 |
| Maximum vacuum in the tank, MPa | 0,085 |
| Tank filling time, min. | 3 — 6 |
| Capacity of water tanks, m3 | 20 |
| Tank lift angle, o | 60 |
| Total weight, kg | 11 200 |
| Overall dimensions, mm | 7,000 x 2,500 x 3,100 |
Sludge sucker KO-524 - MAZ-5337A2
The KO-524 sludge sucker on the MAZ-5337A2 (MAZ-5340V2) chassis is designed for vacuum cleaning of wells, storm and sewer networks from sludge and transporting it to the unloading site. The special equipment includes: tank, vacuum pump with drive, suction boom, hydraulic system and additional equipment. The suction boom is controlled from a remote control panel. Sludge is unloaded by tipping the tank.
Advantages of the KO-524 sludge sucker:
- tool box;
- putting sleeves into pencil cases;
- Italian JUROP level indicators;
- maximum protection for the vacuum pump;
- Italian pneumatic components CAMOZZI;
- additional hatch for draining sludge water;
- Italian pressure limiting valve JUROP;
- vacuum pump automatic lubrication system;
- remote control system for sludge level in the tank;
- suction hoses made of high quality material;
- liquid cooling system for the vacuum pump housing;
- improved visual control of tank filling;
- additional covering of the bottom with a sheet of stainless steel;
- the ability to work at a significant distance from the machine to the well;
- Italian vacuum pump JUROP with liquid cooling and automatic lubrication;
- rotation of the suction boom by 240 degrees and fixing it from arbitrary rotation;
- hermetic fixation of the back cover using screw clamps and a special sealing ring made in Italy.
| Technical characteristics of the KO-524 sludge sucker | |
| Basic chassis | MAZ-5337A2 / MAZ-5340V2 |
| Engine | diesel |
| Engine power, hp | 227 / 240 |
| Tank capacity, m3 | 8,2 / 6,2 |
| Depth of the well to be cleaned, m | 8 |
| Vacuum pump capacity, m3/h | 720 |
| Maximum vacuum in the tank, MPa | 0,085 |
| Tank filling time, min. | 8 |
| Total weight, kg | 18 000 / 19 000 |
| Overall dimensions, mm | 7,400 x 2,550 x 3,500 |
Sludge sucker KO-510K - KamAZ-43253
The KO-510K sludge sucker on the KamAZ-43253 chassis is designed for vacuum cleaning of wells, stormwater and sewer networks from sludge and transporting it to the unloading site. The KO-510K sludge sucker is designed for operation in macroclimatic areas with a temperate climate at ambient temperatures from -20 to +40 degrees Celsius.
The special equipment of the KO-510K sludge suction machine includes: a tank, a vacuum pump with a drive, a suction boom, hydraulic, pneumatic and electrical systems, as well as additional equipment (pressure limiting valve, level measurement window produced by the Italian company JUROP). The suction boom is controlled from a remote control panel. Sludge is unloaded by tipping the tank. To improve unloading, a stainless steel sheet is installed on the bottom of the tank.
| Technical characteristics of the KO-510K sludge suction machine | |
| Basic chassis | KamAZ-43253 |
| Wheel formula | 4 x 2 |
| Engine | diesel |
| Tank capacity, m3 | 3,25 |
| Depth of the well to be cleaned, m | 4,5 |
| Vacuum pump capacity, m3/h | 360 |
| Maximum vacuum in the tank, MPa | 0,085 |
| Tank filling time, min. | 3 — 6 |
| Tank lift angle, o | 60 |
| Total weight, kg | 12 800 |
| Overall dimensions, mm | 7,600 x 2,500 x 3,320 |
Sludge sucker KO-507A2 - KamAZ-65115
The KO-507A-2 sludge sucker on the KamAZ-65115 chassis (6x4) is used for vacuum cleaning of wells, storm and sewer networks from sludge and transporting it to the disposal site. The special equipment of the KO-507A-2 sludge suction machine consists of a tank, a vacuum pump with a drive, a suction boom and other equipment.
The KO-507A-2 sludge sucker is equipped with a high-pressure pump and a monitor gun for washing out sludge in the well. The suction hatch is controlled from a remote control panel. Sludge is unloaded by tipping the tank.
| Technical characteristics of the KO-507A2 sludge suction machine | |
| Basic chassis | KamAZ-65115 |
| Engine | diesel |
| Engine power, hp | 280 |
| Tank capacity, m3 | 7 |
| Depth of the well to be cleaned, m | 8 |
| Vacuum pump capacity, m3/h | 720 |
| Maximum vacuum in the tank, MPa | 0,085 |
| Tank filling time, min. | 7 — 10 |
| Capacity of water tanks, m3 | 2 |
| High pressure pump capacity, m3/h | 2,88 |
| Water pressure created by high pressure pump, MPa | 3 — 15 |
| Tank lift angle, o | 60 |
| Total weight, kg | 22 400 |
| Overall dimensions, mm | 8,300 x 2,500 x 3,600 |
content .. 11 12 15
Sludge cleaner KO-510
Owners of wells, cesspools, sewers, sedimentation tanks and other artificial and natural reservoirs probably know that they are prone to siltation. Therefore, they must be regularly cleaned of sludge, as there is a risk of complete clogging, deterioration of water quality, which can harm your health, and so on. Some people prefer to carry out cleaning manually, which is quite labor-intensive and dangerous. Others use the services of a suction pump for this purpose.
Today there are quite a lot of different sludge sucking machines of foreign and domestic production. Russian businessmen prefer the latter, as they combine geographical and financial accessibility with sufficient functionality and quality. Today we will tell you what the KO 510 sludge sucker is, reveal its technical characteristics in comparison with other brands (KO-524, 530, 560, etc.), equipment and some features.
Equipment
The ko 510 sludge sucker is equipped with a large number of different equipment that is necessary for carrying out cleaning work.
- A tank necessary for storage, processing, ease of transportation and further shipment of waste;
- a chassis designed for installing equipment, transporting it and moving waste. The suction machine ko 507a 2 differs from the presented model in this regard, as it is installed on a KAMAZ (kommash) chassis. The sample in question is transported, as a rule, using a ZIL vehicle;
- a vacuum pump necessary for pumping out sludge deposits and other waste;
- a hose through which receiving and distributing work is carried out;
Sludge cleaner KO-510
- an arrow designed to control the hose;
- control panel, which contains all the necessary indicators for monitoring the status of the equipment and the production process;
- valve through which water is pumped out;
- an additional pump for supplying water under high pressure, designed to wash away sludge.
Without all this equipment, the functionality of the entire system will not be complete. It is also possible to install additional equipment that speeds up and facilitates the pumping process, and also increases productivity.
Specifications
Sludge cleaner KO-510
The technical characteristics of the KO-510 are best suited for installing it on a ZIL chassis, since this vehicle has the necessary carrying capacity, and in this case fuel will not be wasted. Unlike KO-560, which can only be installed on KAMAZ (kommash) due to its significant weight.
Possible malfunctions of the KO-510 pump
| Fault name | Probable Cause | Elimination method |
| Fault name | Probable Cause | Elimination method |
| Pump rotor rotates slowly | The pump is not assembled correctly | Disassemble the pump, wash and reassemble |
| Pump performance drop | Wear of the rotor blades or sinking of the blades due to contamination | Replace blades. If it gets stuck, wash the grooves and blades and reassemble. |
| Knock in the pump | Bearing wear. Recession of the shoulder blades in the grooves. Marks from the blades up to 2 mm deep appeared on the inner surface of the case. | Replace blades. Replace bearings. Replace the housing. |
| Heating of the pump housing above normal (80ºC above ambient temperature) | Lack of lubrication. Pump dirty. | Fill the lubrication system. Disassemble the pump, wash the parts, reassemble the pump. Clean the pipeline from dust and dirt |
| Oil does not flow from the lubrication system through the dropper into the pump. | Air leak in the dropper connection. Dirt ingress. | Tighten the connection of the droppers. Blow out the dropper with compressed air. |
| The KO-510 pump creates insufficient vacuum (less than 0.08 MPa) | Loose pipeline connection. Recession of the blades in the grooves of the pump rotor. Friction of the rotor against the pump cover. | Tighten the connection. Remove the rotor, wash the grooves, blades and assemble the pump. Check the height of the blades |
Features of KO-510
Each piece of technology has its own characteristics that allow it to be used in various situations. In the case of the KO-510 sludge sucker, this is increased productivity of the vacuum pump. The fact is that this model is equipped with a modern Italian-made pump, which is slightly superior to its domestic counterparts.
Another feature is the special design of the tank. It provides filtration of water from silt. This way, you can save time and resources, which is important for running a business. Thanks to their high productive capacity, relatively low cost and low fuel consumption, KO-510 sludge sucking machines are in great demand today among both businessmen and customers.
Purpose of pump 510
The rotary vane vacuum pump KO-510 is designed to create a vacuum or excess pressure in the tanks of vacuum machines of the KO type based on the chassis of GAZ, ZIL, KAMAZ, URAL and MAZ vehicles at ambient temperatures from -20 to +40°C. TU 3648-002-50341404-05. Using the vacuum created by a vacuum pump, the tank is filled and emptied. Marking : Pump KO - 510 0216000-04 right rotation of the rotor. Pump KO - 510 0216000-05 left rotation of the rotor
How does a sludge sucker work?
The suction pump contains:
- high pressure vacuum and plunger pump for pumping out waste;
- a suction hose (boom) that allows waste to be collected from depth;
- gun for washing away silt and viscous sediments;
- tank for collection and removal of waste; can also be used for recycling and temporary
- storage of sludge deposits;
- additional equipment (hoses, extension cords, water tanks).
The principle of operation of the suction pump is simple - with the help of a vacuum pump, waste enters the suction hose and then into the storage tank (cistern) . As the waste separates, water is formed in the tank, which enters a special compartment where it settles and clarifies. To increase the capacity of the tank, excess water is drained through a special pipe. This water is not dangerous and can be used to water garden plants or be drained into a ditch, pond, or forest area.
If you watch a video of how the sludge pump works, you can see that one person is enough to control the process (usually the driver). The machine drives as close as possible to the pumping site, then the suction hose unwinds and lowers into the container to be pumped. After this, just press the start button of the vacuum pump and monitor the filling level of the tank, draining the water in time.
Usually the whole process takes about 30 minutes, of which pumping takes from 3 to 7 minutes.
Waste is transported to special sites (sludge dumps or landfills). On sludge pads, waste is dried and disposed of or sent for processing (fertilizers are made from it). Waste is evacuated through the rear hinged lid of the tank. Some models are equipped with hydraulic devices to push waste out, but more often the discharge occurs under the influence of gravity.
Some numbers:
- The average pumping depth is up to 30 m.
- The volume of the tank is about 3 m3.
- The average hose length is 50-60 m.
- The average hose diameter is 100 mm.
Difference from a sewer truck
People unfamiliar with the process of collecting waste on a professional level often ask the question of how a sludge extractor differs from a vacuum cleaner. These machines are indeed very similar in design and differ only in that the suction pumps are additionally equipped with a gun for washing away viscous deposits. This allows you to effectively clean sedimentation tanks, ponds and wells, while sewage disposal technology is only suitable for septic tanks and cesspools, where the waste has a lower density and a more uniform consistency.
Sludge sucking machines
To connect plumbing fixtures to the water supply network, a flexible water supply is used.
It is in demand when connecting faucets, showers, toilets and other water intake points, and significantly simplifies the installation process. Flexible connections are also used when installing gas equipment.
It differs from similar water devices in its manufacturing technology and special safety requirements.
Characteristics and types
The flexible hose for connecting plumbing is a hose of different lengths made of non-toxic synthetic rubber. Thanks to the elasticity and softness of the material, it easily takes the desired position and allows installation in hard-to-reach places. To protect the flexible hose, there is an upper reinforcing layer in the form of a braid, which is made from the following materials:
- Aluminum. Such models can withstand no more than +80 °C and retain functionality for 3 years. At high humidity, aluminum braiding is prone to rust.
- Of stainless steel. Thanks to this reinforcing layer, the service life of the flexible water line is at least 10 years, and the maximum temperature of the transported medium is +95 °C.
- Nylon. This braid is used for the manufacture of reinforced models that can withstand temperatures up to +110 °C and are designed for intensive use for 15 years.
The fasteners used are nut-nut and nut-fitting pairs, which are made of brass or stainless steel. Devices with different permissible temperatures differ in the color of the braid. Blue ones are used to connect to a pipeline with cold water, and red ones for hot water.
When choosing a water line, you need to pay attention to its elasticity, reliability of fasteners and purpose. It is also mandatory to have a certificate that prevents the rubber from releasing toxic components during operation.
Features of gas connections
When connecting gas stoves, water heaters and other types of equipment, flexible hoses are also used. Unlike water models, they are yellow and are not tested for environmental safety. For fixation, end steel or aluminum reinforcement is used. There are the following types of devices for connecting gas appliances:
- PVC hoses reinforced with polyester thread;
- made of synthetic rubber with stainless steel braid;
- bellows, made in the form of a corrugated stainless steel tube.
The Santekhkomplekt holding offers engineering equipment, fittings, plumbing fixtures and devices for connecting them to communications. The assortment is represented by products and materials from well-known foreign and domestic manufacturers.
Discounts apply for bulk purchases, and product quality is confirmed by standard certificates. For information support and assistance, each client is assigned a personal manager.
The ability to arrange delivery within Moscow and to other regions of the Russian Federation allows you to quickly receive the purchased goods without unnecessary hassle.
Popular suction pump models
On the Russian market, domestically produced models are most in demand. Power, spaciousness, affordable price and excellent maneuverability make them indispensable when working both within the city and in rural areas and at remote sites:
- KO 507AM is ideal for cleaning clogged pipes and utility networks, including removing grease-containing sediments. It is installed on a KamAZ base, holds up to 7 m3 of waste, and collection is possible from a depth of up to 6 m.
- KO 510 is a machine with a compact tank of 3.25 m3. Mounted on a ZIL chassis, the sludge extractor does an excellent job of cleaning wells and sewer systems. Cleaning depth is up to 4.5 m. Equipped with tanks for water (20 l) generated during waste collection.
- KO-530 is a powerful and capacious sludge pump based on KamAZ with a tank of 9.7 m3. It can be equipped with additional tanks, hoses and extensions, which allows you to work at greater depths. One of the most productive sludge sucking machines today.
- KO 560 with a volume of 6000 l belongs to the combined machines. In the basic version, they are equipped with sludge sucking and sewer cleaning equipment. They are notable for the fact that you can additionally install a blade and a watering system, after which the sludge suckers can be used as snow blowers, sprinklers and even fire engines. Installed on KamAZ chassis.
Specifications
As an example, let’s look at the technical characteristics of the KO 510 sludge extractor. This is one of the most popular machines, which can be easily recognized in the photo by its ZIL chassis.
Dimensions:
- length - 7000 mm;
- width - 2500 mm;
- height - 3100 mm.
Total weight - 11000 kg. The base chassis is ZIL-432932. Pumping depth - 4.5 m. Tank volume - 3.25 m3. The productivity of the vacuum pump is 360 m3/h. The maximum vacuum in the tank is 0.085 MPa. Tank filling time - 3-6 minutes
Comparison of vacuum pumps for various municipal vehicles
The vacuum pump is designed to create a vacuum in the tank of vacuum and sludge sucking machines. It consists of a cast iron housing in which the rotor is eccentrically mounted on bearings. Textolite blades move freely in the grooves in the rotor.
When the rotor rotates, the blades, due to centrifugal force, are pressed against the inner surface of the pump housing. Air is pumped due to changes in the volumes of cells formed by an eccentrically located rotor, textolite plates, pump housing and end covers. The pump is equipped with a lubrication system.
Lubricant flows to the bearings and into the suction cavity of the pump. The amount of supplied oil is regulated by adjusting screws.
For long-term operation of the vacuum pump, it is necessary to keep the pump clean, prevent the housing from heating above 80°C, monitor the oil consumption of the lubrication system (oil consumption should be 12 drops per minute with each dropper (120 g/hour with all droppers), periodically flush the oil tank and fill it with clean filtered oil K-12 GOST 10877-76.
Vacuum machines use pumps KO-503V.02.14.100, KO-505A.02.15.100, KO-522A.02.01.100, KO-510.02.16.000.
The KO-503 vane-rotor pump is designed to create a vacuum or excess pressure in tanks of vacuum machines of the KO type based on the chassis of GAZ -3307, GAZ-3309, GAZ-53 (KO-503V, KO-503V-2, KO-503V) cars -3, KO-503V-ABS, KO-503V-2-ABS, KO-503V-3-ABS), operating at temperatures from minus 20 °C to plus 40 °C.
Its cast-iron body is closed on both sides with caps with bearings and has holes for introducing lubricant from a nearby tank. Inside the housing there is a rotor that rotates on two bearings. Textolite blades are installed in the rotor grooves.
Model KO-503 0214100 has left-hand torsion, and model KO-503 0214100-02 has right-hand torsion.
The KO-505A pump is a vacuum pump for vehicles based on ZIL, KAMAZ, URAL, MAZ. The pump housing is ribbed cast iron, closed on both sides with covers. The pump is operated at temperatures from minus 20 °C to plus 40 °C. The rotor body has built-in blades made of durable textolite. Oil is supplied to the mechanism automatically when the device is turned on.
The KO-510 pump is designed for installation of machines on the chassis of MAZ, GAZ, URAL, ZIL, KAMAZ vehicles. Operates in a temperature range from minus 20 °C to plus 40 °C.
The design of the KO-510 pump, similar to the design of the KO-505 pump, has a larger volume and performance than the similar pumps KO-503, KO-505. Therefore, the KO-510 vacuum pump heats up more, for which two fans are installed on both sides.
Model KO-510 0216000-04 has right-hand rotation, and model KO-510 0216000-05 has left-hand rotation.
The vacuum pump KO-522 is a vane-rotor pump, used on vacuum machines KO-522A, KO-503V. Can be used at temperatures from -20 to +40Cº. The KO-522 pump has more reliable blades compared to textolite. KO-522. It is manufactured in two versions: KO-522A.02.01.100-01 - right rotation and KO-522A.02.01.100 - left rotation.
Table of technical characteristics of vacuum pumps KO
Item no. Parameter name Pump KO-503V.02.14.100 Pump KO-505A.02.15.100 Pump KO-510.02.16.000
1 Power consumption, kW 6.0+-0.6 9.0+-0.6 9.0+-0.6
2 Productivity at P=0, cubic meters/hour 240.0+-20.6 310.0+-20.0 360.0+-20.0
3 Rated rotor speed, rpm 1450 1150 1450
4 Direction of rotor rotation Right, left Right, left Right, left
5 Maximum vacuum, MPa 0.085 0.085 0.085
6 Working pressure, MPa, no more than 0.06 0.06 0.06
7 Continuous operation time, h no more than 1 1 1
8 Efficiency 0.8-0.9 0.8-0.9 0.8-0.9
9 Weight, kg, no more than 85 123 125
10 Overall dimensions, mm, no more: length / width / height 470 / 280 / 255 520 / 300 / 285 700 / 310 / 355
11 Marking of blades KO-503.0214113-01 KO-505.0215105 KO-510.0216004
12 Dimensions of blades, mm 270x42x5.5 300x55x5.5 420x45x5.5
Vacuum pumps for special equipment are reliable and easy to operate and maintain, so they are widely used in municipal vehicles!
Sludge cleaner KO-510
Owners of wells, cesspools, sewers, sedimentation tanks and other artificial and natural reservoirs probably know that they are prone to siltation. Therefore, they must be regularly cleaned of sludge, as there is a risk of complete clogging, deterioration of water quality, which can harm your health, and so on. Some people prefer to carry out cleaning manually, which is quite labor-intensive and dangerous. Others use the services of a suction pump for this purpose.
Today there are quite a lot of different sludge sucking machines of foreign and domestic production. Russian businessmen prefer the latter, as they combine geographical and financial accessibility with sufficient functionality and quality. Today we will tell you what the KO 510 sludge sucker is, reveal its technical characteristics in comparison with other brands (KO-524, 530, 560, etc.), equipment and some features.
Equipment
The ko 510 sludge sucker is equipped with a large number of different equipment that is necessary for carrying out cleaning work.
- A tank necessary for storage, processing, ease of transportation and further shipment of waste;
- a chassis designed for installing equipment, transporting it and moving waste. The suction machine ko 507a 2 differs from the presented model in this regard, as it is installed on a KAMAZ (kommash) chassis. The sample in question is transported, as a rule, using a ZIL vehicle;
- a vacuum pump necessary for pumping out sludge deposits and other waste;
- a hose through which receiving and distributing work is carried out;
- an arrow designed to control the hose;
- control panel, which contains all the necessary indicators for monitoring the status of the equipment and the production process;
- valve through which water is pumped out;
- an additional pump for supplying water under high pressure, designed to wash away sludge.
Without all this equipment, the functionality of the entire system will not be complete. It is also possible to install additional equipment that speeds up and facilitates the pumping process, and also increases productivity.
Specifications
- working depth is 4500 mm, the suction machine KO 524 is superior in this regard - 6000 mm;
- pump productivity is 730 m3/h, the sludge sucker ko 530 21 lags behind in this case - 720 m3/h;
- the tank volume is 3.25 m3, the sludge sucker KO 530 01 exceeds it - 9.5 m3, and the KO-560 (commash) - 11 m3;
- The lifting angle of the tank is 60 degrees; in the KO-560 (kommash) this function is not provided at all;
- tank filling time is from 3 to 6 minutes, the indicator depends on the performance of the pump and the capacity of the hose;
- weight – 11.2 t, 560 (commash) – 24 t;
- The chassis used is ZIL, KO-560 is installed on KAMAZ (kommash).
The technical characteristics of the KO-510 are best suited for installing it on a ZIL chassis, since this vehicle has the necessary carrying capacity, and in this case fuel will not be wasted. Unlike KO-560, which can only be installed on KAMAZ (kommash) due to its significant weight.
Comparative technical characteristics of the KO-510 pump
| Parameter/pump | KO-503 | KO-505 | KO-510 |
| Power consumption, kW | 6,0+-0,6 | 9,0+-0,6 | 9,0+-0,6 |
| Productivity at P=0, cubic meters/hour | 240,0+-20,6 | 310,0+-20,0 | 360,0+-20,0 |
| Rated rotor speed, rpm | 1450 | 1150 | 1450 |
| Rotor rotation direction | Right, left | Right, left | Right, left |
| Maximum vacuum, MPa | 0,085 | 0,085 | 0,085 |
| Working pressure, MPa, no more | 0,06 | 0,06 | 0,06 |
| Pump temperature, °C, no more | 80 | 80 | 80 |
| Efficiency | 0,8-0,9 | 0,8-0,9 | 0,8-0,9 |
| Weight, kg, no more | 85 | 125 | 125 |
| Overall dimensions, mm, no more: - length - width - height | 470 280 225 | 520 300 285 | 670 310 338 |
Features of KO-510
Each piece of technology has its own characteristics that allow it to be used in various situations. In the case of the KO-510 sludge sucker, this is increased productivity of the vacuum pump. The fact is that this model is equipped with a modern Italian-made pump, which is slightly superior to its domestic counterparts.
Another feature is the special design of the tank. It provides filtration of water from silt. This way, you can save time and resources, which is important for running a business. Thanks to their high productive capacity, relatively low cost and low fuel consumption, KO-510 sludge sucking machines are in great demand today among both businessmen and customers.
