Telehandler Manitou MLT-X 735-120 LSU

Rental of special equipment in Moscow > Telescopic loaders > Manitou MT-732

Rent Manitou MT-732 Characteristics Features Video Photo

General view of the MT-732 The MT-732 loader from the French concern Manitou belongs to the entry-level class.
The maximum lifted load is 3200 kg
with a reach of
1.75 m
from the front wheel to the center of gravity of the load.
It can lift such a load (3.2 tons) to a height of 4.5 meters, and with a maximum boom lift of 6.9 m,
the maximum load capacity will be 2800 kg with a reach of up to 2.1 meters.
More details in the load diagram. The loader has all-wheel drive on all 4 wheels, and all wheels also turn (steered), which makes the turning radius of the Manitou MT-732 “telescope” small (3.67 m on the outer wheels) and gives a crab ride. The machine is equipped with a torque converter with electro-hydraulic gear shifting: 4 forward speeds and the same number in reverse (reverse), maximum speed up to 25 km/h. If the specifications are suitable for your facility, you can rent
. Or look at other telehandler options.

Order for rent

Behind the wheel of a “telescope”: the basics of masterful control

Today, not a single large-scale construction site, large farmland or industrial enterprise can do without a telescopic loader. This special equipment significantly saves human resources, is capable of performing many functions and overcoming difficult terrain. At the same time, it has low fuel consumption and inexpensive maintenance. But another important advantage of such units is ease of control.

The instrument panels of forklifts from different manufacturers differ significantly in some places. Modern models are equipped with many indicators, sensors, and electronic control systems. But the basic base and main controls remain the same. It's not difficult to deal with them. The developers made sure that it could be mastered on an intuitive level. It is enough to know the structure of the mechanism, and then everything will be clear.

Beam cranes, lifting hooks, winches, lifting equipment for big bags, lifting platforms

With removable lifting accessories, the Manitou loader provides flexibility for handling materials, tools and equipment in confined spaces on construction and industrial sites.

Equipping the equipment with a lifting platform will allow municipal, industrial and private enterprises to carry out work on welding structures at height, installing sandwich panels and various facade systems, roofing work, trimming trees, installing or changing power lines, repairing and maintaining street lighting, etc. With Using such a hitch, you can also deliver loads to objects located several meters above road level.

Manitou loaders are certified in Russia and can be used in conjunction with lifting platforms. Therefore, after receiving permission from Rostechnadzor, organizations and individuals can perform work at height using this equipment.

Lifting devices meet the requirements of regulatory authorities and have electrical connectors for connecting the control panel. Thus, the loader operator can control the raising and lowering of the boom from the cradle, which meets the rules of safe operation.

Basic Basics for Every Operator

Using the following tips, you can easily learn the basics of operating a telehandler.

Basic organs:

1. Ignition switch: has three positions: ON, OFF, START.
2. Steering wheel.
3. Sound signal (mainly located in the center of the steering wheel).
4. Travel direction selector (in cars with automatic transmission): F – forward, N – neutral, R – reverse.
5. Gear and reverse shift levers: 2 – high speed, N – neutral position, 1 – low speed.
6. Handle for turning on lighting devices (headlights, side lights, lights) and turn signals.
7. Parking brake (handbrake).
8. Pedals:
   accelerator;
9. brake;
10. for automatic transmission – slow speed, for manual transmission – clutch;
11. Lift control lever
12. Handle for moving the mast.
13. Steering wheel lock (for adjusting the steering wheel tilt).

Along with the main organs, every telescopic handler also has many additional ones. Their number and purpose depend on the manufacturer and functionality of the unit.

Important! It’s not always “the more buttons, the better.” Despite the fact that they are all ergonomically located, have excellent access and supposedly help the operator, many of the “bells and whistles” are practically not used in work, but only distract the driver.

SETTING UP THE OPERATOR'S WORKSTATION

Before starting work, it is necessary to adjust the forklift driver's workplace.
First of all, it is worth setting up the seat on which the operator will work. The seat position must be adjusted when the driver is not sitting on it. To avoid health problems, the suspension of the workplace must be adjusted according to the weight of the worker. The inclination of the seat back, its depth, and the height of the headrest are adjusted based on the individual characteristics of the driver. An incorrectly adjusted head restraint is the cause of many injuries and accidents.

In addition, safety rules prohibit operating equipment if the seat belt does not work. If the belt is defective or faulty, it must be replaced and the fault repaired before operating the forklift.

For comfortable control

Like any other machine, forklifts require regular technical inspection. It is better to do this in specialized workshops and dealership centers. But there is a small list of work that must be completed before each departure. This does not require a lot of time and the presence of an experienced mechanic; the operator can completely cope with this task on his own. What you need to check:

• oil level in the gearbox and engine;
• amount of coolant;
• fuel filter contamination;
• tire pressure;
• adjusting side mirrors;
• presence of glass washer;
• hose wear;

Specifications

• Engine: 4-cylinder Perkins 1104E 44TA with a volume of 4.4 liters and a power of 124 hp. With.;
• Transmission – mechanical with torque converter 4 forward / 4 reverse;
• Axial piston pump – 150 l/min;
• Maximum lifting height – 6.9 m;
• Maximum boom reach – 3.9 m;
• Max. load capacity at 500 mm from the base of the bucket – 3500 kg;
• Max. load capacity at max. departure – 1200 kg;
• Max. load capacity at max. height – 3000 kg;
• Tires – 460/70 R24;
• Hydraulic tank – 135 l;
• Fuel tank – 120 l;
• Turning radius – 3.7 m;
• Ground clearance – 440 mm;
• Dimensions (LxWxH) - 4790x2400x2300 mm;
• Max speed – 35 km/h;
• Loader weight – 7100 kg.

If you find an error, please select a piece of text and press Ctrl+Enter.

Steering Capabilities

Telescopic loaders are very maneuverable, which is one of the main advantages. They manage to achieve this thanks to the special movement of the chassis. Their narrow arrangement provides large turning angles. Basically, such special vehicles have three modes:

1. “Crab move” (wheels in one direction).
2. “Rut in rut” (in different directions).
3. Front wheel steering only.

Important! Regardless of the steering mode, all-wheel drive can be switched off if desired. This will save a lot of fuel.

In conclusion, I would like to remind you that you should operate the forklift very carefully, observing all safety measures. Always use common sense when determining balance for balance. Avoid slippery, heavily loaded and other dangerous road areas. And before you get behind the wheel of a brand new “telescope,” be sure to read the operating instructions from the manufacturer.

USING THE TRANSMISSION FOR SAFE DRIVING

The gear is selected based on the characteristics of the work being performed:

• 1st gear – used when performing excavation work;
• 2nd gear – used when working in confined spaces and for loading operations. It is also recommended for use when moving a forklift with a trailer or on hilly terrain;
• 3rd gear – used for handling cargo, as well as when moving with a trailer on a flat road surface;
• 4th gear – used on the road under good road conditions.

Telehandler Manitou 625. Manitou mh 25 4 t buggie

• Rise: 10.6 s
• Lowering: 7.7 s
• Boom extension: 22.3 sec
• Boom fold: 11.6 sec
• Bucket cylinder extension (unloading): 3.3 s, retraction (loading): 4.1

• Closed cabin;
• Torque converter with electrohydraulic reverse
• Hydraulic installation for additional equipment;
• Tubeless wheels, ground pressure about 0.62 kg/cm2;

Manitou MH 25 – 4 T Buggie • You should also take into account the cost of operating costs of a telehandler from Manitou, it is minimal.

Features and Benefits

1. The durable frame is made from a single block of high-strength steel.
2. The hydrostatic transmission promotes smooth movements with increased safety.
3. The special design of the guides allows work to be carried out on any soil, while ensuring good and fast transmission of movement to the wheels.
4. The diesel system is additionally protected by a durable housing, which reduces the impact of possible shocks during operation.
5. The retractable boom blocks are equipped with a reliable mechanism that allows you to work with heavy loads.
6. Special built-in balancers increase the safety of the loader and control the permissible level of tilt.
7. Quick access to the main components and mechanisms for repair and service is provided by the design features of the equipment.
8. Operating modes are stored in memory thanks to a “smart” electronics system.
9. The rotating platform increases the maneuverability of the equipment and increases productivity several times.
10. Loaders operate on the basis of a self-propelled wheeled chassis with a large radius of circular motion.
11. The special design of the boom expands the capabilities of the equipment, allowing it to be additionally equipped with buckets, forks, hooks, grips and various devices for mixing solutions.
12. Comfortable work for the operator is ensured by large viewing windows and a spacious cabin with an ergonomic instrument panel.

- the official dealer of the French brand Manitou in Russia, offers to buy rotary telescopic loaders inexpensively with delivery. You can also lease equipment from us. The catalog offers models with a load capacity from 4000 to 7000 kg with a working lift height of up to 31.6 m. To make a purchase, check the price of equipment in Moscow, St. Petersburg or Krasnodar, contact the managers by phone.

Still have questions?

Fill out the form below and our specialists will contact you shortly

Operating rules and possible malfunctions

Before you start using it, you need to make sure that this type of loader is suitable for the specific terrain and can perform the assigned tasks. Important! Don’t try to save money and buy the most primitive version of the unit for heavy work, because it’s not for nothing that the manufacturer divided the cars into clear categories and developed different technical indicators. Therefore, if you place a weak unit in a difficult area, there is a high probability of rapid breakdown.

If you work in an area where there is not enough light, you must additionally equip the stacker with special lights. The forks should always be pointed in the direction of the lift, especially under heavy loads! The main platform of the forklift must be firmly secured and not shaken. When driving onto a bridge or other suspended structures, it is necessary to take into account their load capacity and the degree of loading of your device.

Be sure to read: Mini loader MKSM 800

If there are holes or other surface damage in the area, special precautions must be taken and do not go close to dangerous areas. Operators must be especially careful in such situations and in no case neglect safety rules, including the use of seat belts.

Despite all the technical advantages and high-quality equipment, Manitou loaders have a number of certain disadvantages. For example, if you plan to operate the vehicle on uneven terrain, be prepared to require additional control, since the speed of the unit in such conditions should be proportional to the degree of surface roughness. The second “enemy” of forklifts is bad weather, since many of the company’s models are designed only for indoor use. But many consumers, including Russian ones, neglect this point and take their cars out into the open during rain or snowfall.

Electric motors have the weakest power

Remember that repairing French equipment will cost you very little, and it is better to foresee all possible options related to a loader breakdown in advance.

Cylinder Clamp, Tire Clamp, Pipe Layer, Underground Mining Lift

During the operation of heavy-duty equipment: cranes, excavators, front-end loaders in mining enterprises, sometimes there is a need for repair and maintenance of massive hydraulic cylinders. To remove and install such a cylinder on an excavator using a crane, it will take two cars and two working days.

If you use the Manitou cylinder grip for this purpose, one loader and about six hours of work is enough. Thus, this device saves time and reduces the cost of servicing quarry equipment.

For tire fitting work with tires weighing 1–3 tons, a tire gripper is used with the loader.

MANITOU – Equipment Manufacturers (MANITOU – MANITOU Group – Manitou

www.stroyteh.ru

High pressure washers

High-pressure washing of telescopic equipment is an additional opportunity to use the versatility of a hydraulic loader and efficiently clean the territory of a construction site, as well as machinery and equipment, from dust and dirt.

How to calculate fuel consumption rate

The fuel consumption rate for forklifts is determined by the following formula:

Q = (N*q)/(1000*R*k), where

N is an indicator of the power of specific diesel engines, which is installed in a specific model for which the calculation is being carried out.

q is the nominal fuel consumption, which is specified in the relevant documentation for the engine.

R is an indicator of the density of the diesel fuel used. This parameter is known initially, according to the approved standard (840 kg/m 3 - for winter and 860 kg/m 3 - for summer). For convenience, the general indicator is set to 0.85 kg/dm 3 .

k is a specific coefficient that reflects the time period in percentage terms when the front loader was operated in normal mode and the amount of time when it was used at maximum crankshaft speed.

Popular models and prices for Manitou forklifts. Safety system

• Telescopic.
• Fork.
• Mast.