Choosing the best segment mower for a walk-behind tractor: Neva, Salyut, Cascade and MTZ

Rotary mower for the Neva walk-behind tractor.
The Neva walk-behind tractors have received a lot of positive feedback from users. But to effectively use the walk-behind tractor, it is necessary to select mounted and trailed equipment. A plow is included as standard, but on a real farm you can’t do without a mower. Mowers are divided into rotary and segmental. The choice depends on the intended work. Mower for walk-behind tractor "Neva" price and quality largely depend on the manufacturer. The most popular mowers for the Neva walk-behind tractor, their characteristics and price, video and photos in one article.

Why is it needed?

A mower for a walk-behind tractor is an attachment designed for mowing vegetation with varying thicknesses and coarseness of stems. The robust design ensures simple and easy operation. Its resource is quite sufficient for haymaking and harvesting of herbaceous crops.

Unlike hand scythes, such equipment demonstrates a productivity of up to 0.35 hectares per hour, it is not sensitive to the quality of the grass cover, and can be used to clear areas and prepare virgin soil for further processing.

The Zarya mowers produced in Kaluga have several modifications, based on which the compatibility of the equipment with specific equipment models is determined. Among them there are the following options, adapted for combination with the Neva MB1 and MB2 walk-behind tractors:

• modernized, with an offset frame on top and a V-belt drive, suitable for mowing especially tall and thick grass;
• KR. 05.000-05 – a universal solution for equipment with a power of 5-7 hp. With.

Each of the presented options has its own characteristics and advantages, allowing you to work in the most difficult conditions.

If the efforts of a conventional mower are not enough to cut thick growth, then the modernized version, which eliminates the clogging of the subframe space with mowed stems, will be a more preferable option.

Conversion of Neva walk-behind tractors into tractors

Many land owners perform such manipulations as converting Neva walk-behind tractors into tractors.

Minitractor from the Neva walk-behind tractor

In general, this task is quite realistic, however, to implement it, a certain amount of additional equipment will be required, but first of all, a high-power walk-behind tractor will be needed. After all, the larger the area that needs to be processed, the more powerful the unit will be required.

To save resources, it is better to opt for models that run on diesel fuel. You will also need an additional pair of wheels, steering and braking system. To describe in a nutshell the creation of a tractor from a walk-behind tractor is a difficult task.

Best models

The rating is based on user reviews.

Ghepard

Country of origin: Italy. The segment-finger model is considered a professional device. Working width 92 cm. Working speed 0.5-4 km/h. The model can be used in personal farming, on soda plots and for commercial use.

The design is equipped with a transmission with a long working life. The teeth of the device are made of high-quality steel with a special anti-corrosion coating. The model is convenient to use for

hay making and decorative mowing.

Specifications:

• cutting height – from 25 mm;
• grass cutting height – up to 1 m;
• dimensions – 920x500x500 mm;
• weight – 32 kg.

The manufacturer's warranty period is 2 years.

Advantages:

• good build quality;
• reliability in operation;
• large working resource.

Main disadvantage:

not effective for working over large areas.

MBK0012015

Country of origin: Germany. The model is intended for professional use. Compatible with the G-85 107 walk-behind tractor. The design is equipped with cutting teeth made of steel. Their surface has a special coating. Model

It features a perfectly even cut of plants. Grass cutting width 107 cm. Working speed 0.5-4 km/h.

Specifications:

• cutting height – from 25 mm;
• grass cutting height – up to 1 m;
• dimensions – 1070x500x500 mm;
• weight – 34 kg.

The manufacturer's warranty period is 2 years.

Advantages:

• large grip;
• adapted for cutting grass over large areas;
• reliability in operation;
• high-quality assembly.

Main disadvantage:

high price.

Eurosystems

Country of origin: Italy.
The segment mower model is designed for the Eurosystems P 70 walk-behind tractor. It has a wide grip of 102 cm and high-quality cutting elements. The device is designed for mowing grass over large areas. Operating speed – 2-4 km/h. Specifications:

• cutting height – from 25 mm;
• grass cutting height – up to 1 m;
• dimensions – 1020x500x500 mm;
• weight – 55 kg.

The manufacturer's warranty period is 1 year.

Advantages:

• large grip;
• high performance;
• reliable assembly.

Flaws:

• heavy weight;
• high price.

Tselina KS-850

Country of origin: Russia. A special feature of the model is that it is equipped with a device that allows you to lift dead grass during mowing. The mower's durable teeth are resistant to contact with stones. Working width – 85 cm. The mower is compatible with walk-behind tractors: “Tselina”, “Neva”, “Luch”, “Cascade”,

“Crosser C-RM8E”, “Crosser C-RM10”, etc. Productivity – 0.48 ha/hour.

Specifications:

• cutting height – up to 40 mm;
• grass cutting height – up to 1 m;
• dimensions – 1035x660x910 mm;
• weight – 46 kg.

The warranty period is 2 years.

Advantages:

• suitable for working in areas with complex terrain;
• compatibility with various models of walk-behind tractors.

Main disadvantage:

capture of competitors already.

Mobile K G85

Country of origin: Italy. The model is designed for cutting hay. The working width is 107 cm. The device is easy to control. It is designed for installation on Grillo walk-behind tractors.

The design has a reliable gearbox and sharp cutting teeth. The latter are manufactured in Germany. Operating speed 0.4-4 km/h. The model is designed for hay harvesting and decorative mowing.

Specifications:

• cutting height – from 25 mm;
• grass cutting height – up to 1 m;
• weight – 34 kg.

The warranty period is 2 years.

Advantages:

• high-quality cutting tools;
• perfectly straight cut;
• high performance.

Main disadvantage:

high price.

Purpose

This device and its modifications are used in several areas:

• hay making;
• mowing grain crops;
• clearing the land of wild plants;
• improvement of lawns and garden plots.

To produce good hay, the grass must be cut close to the root. This effect can be achieved using specialized attachments for a rotary mower. Others chop up plants during mowing. “Chopped” vegetation is not suitable for feeding livestock, but quickly rots, turning into fertilizer. This method is used when you just need to clear the space of weeds.

When harvesting, a paired scythe attachment is used. She carefully cuts the ears of corn and arranges them in a special way. In most cases, cereal crops are sown in industrial quantities, so walk-behind tractors with removable equipment are rarely used.

Rotary mowers help keep your lawn grass in good condition. The special structure of the cutting mechanisms makes it possible to minimize the cutting height.

The efficiency of this device is determined by the terrain features. An uneven ground surface can make it difficult for a walk-behind tractor with an attachment to pass through and prevent complete mowing.

Tools and attachments for planting and harvesting

The most unusual and interesting attachments for planting and harvesting can be considered devices for planting potatoes using a walk-behind tractor. The design of the nozzle can be understood from the photo. Tubers are loaded into a cone-shaped container, which are selected during the movement and fed at a measured frequency by a special chain elevator into a furrow cut by a motorized plow. Thus, the accuracy of placing seed in the furrow is maintained.

A more serious version of the seeder, made on the basis of a trailer, allows for continuous planting of small heads of onions or garlic. This attachment can only be used on soil that has been prepared and cultivated using a walk-behind tractor. After sowing, the soil can be covered with a nozzle covering the planting surface.

Using a simple attachment, known as a potato digger for a Neva walk-behind tractor, you can dig up a potato crop. In essence, a potato harvesting attachment is a set of rods attached to a plow, with which the walk-behind tractor lifts a layer of soil with potatoes and sifts the mass, separating clods of earth from the potatoes.

In separate, more advanced designs, the attachment for the Neva walk-behind tractor even allows you to collect tubers in a hopper.

Thanks to the presence of an additional power take-off unit, part of the rotational energy can be used to mow grass crops using a special attachment, as in the photo. The mower for the Neva walk-behind tractor, thanks to its high engine power, works much more productively and faster than special gasoline walk-behind mowers.

How to make a mower for a walk-behind tractor with your own hands?

An important point: you should start creating mowers on a walk-behind tractor yourself only if the person has experience in the field of design and has the necessary tools. It will be quite difficult for a beginner to do all the operations correctly, but he can try.

Rotary mower on walk-behind tractor

To make this type of attachment you will need:

• Chains (from the chainsaw gearbox);
• Knives (preferably made of hardened steel (max. 8 pcs.));
• Disks from a grain seeder (2 pcs.).

First, using a solid drill, you need to drill holes on the disk with a diameter of no more than 6 mm. Then, using a shredder, you should secure the cutting parts to the disks themselves. The gap that appears between the shredder and the knife should be 2 mm larger than the thickness of the knife blade. It is necessary to tighten the axle with the disk until it stops and add a protective housing to the drive. Having completed these procedures, you can “put on” the hitch and master the new device for caring for the site and preparing feed for livestock.

Segment mower on walk-behind tractor

https://youtube.com/watch?v=kNfjFzqZutI

A homemade part should be made from (metal) beams of size 15x50x120. The master should make 12 holes in them so that their overall dimensions correspond to M8 bolts.

In the future, these bolts will be supplemented by a connecting rail (89 cm) with sharp knives and teeth. An important point: the knives should be placed on both sides of the beam. Clamps and runners are securely attached to them, and the base frame is supplemented with a wheel (this part can be obtained after disassembling a regular stroller).

Thanks to the drawing below, you can get a fairly productive mower that will serve for many years and competently perform its task. For many owners of walk-behind tractors, a mower will certainly become a serious assistant, especially if you choose it wisely or make it yourself. The owners of these mechanical units must make maximum use of the potential of the equipment and simplify the maintenance of the land, and the attachments discussed above are ideally suited for this purpose.

https://youtube.com/watch?v=YxfORSvbOXM

Attachments for walk-behind tractors "Neva"

Attachments for walk-behind tractors "Neva" are additional technical equipment for walk-behind tractors, which are used as auxiliary equipment for cultivating land and preparing the soil for planting seedlings, seeds, and also during harvesting.
Weeding rippers Kit for installing the mower "Zarya" on the walk-behind tractor "Neva" MB Compact Kit for installing the mower "Zarya" on the walk-behind tractor "Neva" MB1 General view of the walk-behind tractor Single-row disc hiller Double-row hiller STV

Using attachments, you can easily prepare soil of any degree of hardness for agricultural work, harvest potatoes and other tuber crops, as well as clear the land of plant debris or harvest.

Mounted plows

Mounted plow PN

Mounted plows are equipment that is used to prepare the soil for planting grain and industrial crops. With the help of plows, you can plow the land to different depths.

Since Neva walk-behind tractors are designed to work on medium- and large-sized areas and are adapted for loosening, plowing and harvesting soils of any complexity, attachments such as a plow allow you to turn over the top layer of soil.

The plowing process makes the soil softer and prepared for further sowing of crops, and also reduces the number of weeds by moving their seeds to deeper layers of the earth.

A conventional mounted plow, for example, a PN plow, has overall dimensions of 440x310x530 mm, a working width of 180 mm, a maximum plowing depth of 220 mm and overall dimensions of 7.9 kg. The plow is attached to the walk-behind tractor using a universal hitch. It is recommended for use on soils that have not previously been treated.

Single-body plow N

A single-body plow is lighter; an example is the H plow model weighing 5.9 kg. It has a working width of 220 mm and a plowing depth of 200 mm. Overall dimensions of the plow are 480x320x475 mm. The plow is connected to the walk-behind tractor using a hitch (not included in the kit).

Before you start work, you need to make sure that the plow is adjusted - the field board should be parallel to the direction of movement of the walk-behind tractor.

Plow "MOLE"

Adjustment of the plow on Neva walk-behind tractors must be carried out before starting work on the ground. You should make sure that all parts are properly interconnected and fixed in the correct position according to the instructions. To fix the walk-behind tractor, place it on a flat surface, and only then attach the plow.

You can start working with the walk-behind tractor and plow only if all fastenings are in the position recommended by the instructions. If you are not sure that the plow is operating correctly, and while renting a walk-behind tractor you hear a strange noise, buzzing, clicking or other unusual sounds, you should stop working by stopping the walk-behind tractor, and then check the correct coupling of the plow and the walk-behind tractor.

Video: Motoblock Neva - plowing with a plow

Cultivation cutter

Milling cutters are special attachments equipped with knives of various sizes that chop weeds and vegetation in the soil. Knives can be replaced and cleaned by first detaching the cutters from the body.

Milling cutter for walk-behind tractor Neva

The main task of the cutter is to cultivate the soil before planting seedlings or seeds, as well as to cultivate the soil surface in preparation for wintering.

Houndstooth cutter

The cutter itself consists of mounted knives. They are attached to the walk-behind tractor using a pin, a coupling device and a king pin.

If necessary, you can adjust the position of the knives in height and their angle of rotation. For proper installation of mounted knives, it is recommended to install the Neva walk-behind tractor on a flat surface.

The knife is securely fixed to the walk-behind tractor, making it easy to carry out soil cultivation or other manipulations. It is recommended to install additional equipment on the walk-behind tractor by checking the operating instructions.

Potato planter

Single-row mounted potato planter

An indispensable seasonal attachment for Neva walk-behind tractors is, of course, a potato planter. For example, a single-row mounted potato planter is a device that allows you to plant potato tubers to a depth of up to 14 cm. The tuber planting step is from 27 to 31 cm, and the planting diameter is from 4 to 6 cm. The width of the created track is from 47 to 53 cm The overall dimensions of such equipment are 67.5x56.5x79.0 cm with a weight of 37.5 kg.

The potato planter is attached to the walk-behind tractor using a special bracket (flange). The bracket can be purchased separately or you can complete your order with this part in advance, before purchasing. The equipment must be used on pre-loosened soil. It is not recommended to use on soils that are not prepared for planting, as well as on soil with a large number of roots, stones and other foreign objects.

Potato digger

Potato digger

A digger or potato digger is an attachment that does not require the use of a hitch. Their weight, working width, overall dimensions and digging depth may differ, but the purpose is the same - to remove potatoes from the ground.

The potato digger is mounted in a special hole on the walk-behind tractor and secured using a clamp supplied with the walk-behind tractor. To quickly install the digger, you need to raise the wheels of the Neva walk-behind tractor to a height of 100 to 200 mm and secure the digger in the front part of the walk-behind tractor, inserting it into the appropriate holes.

The principle of operation is quite simple: the soil is captured by a special knife and falls into the shaking mechanism, so the bulk of the soil and small stones are sifted out, and the potato tubers remain.

Some farmers make potato diggers themselves, using suitable materials for this purpose. However, the manufacturing process takes a certain time, and for high-quality and uninterrupted operation of the walk-behind tractor, especially for novice farmers, it is better to opt for ready-made equipment.

According to statistics, the use of potato diggers gives a harvesting productivity of 0.1-0.2 ha/h, this figure is several times higher than that of manual harvesting.

Mounted potato digger KNM

The most budget option is a universal potato digger; it is the simplest in appearance and method of attachment.

In addition, due to the fact that to use such a digger you do not need a power take-off shaft, it can be connected to walk-behind tractors of older models that do not have a PTO.

For medium and large plots of land, it is recommended to use vibrating potato diggers; they allow you to extract up to 98% of the potato harvest from the ground.

The design of vibrating diggers is more complex: the main elements are a vibrating barrel, a drive, and a ploughshare.

Potato digger KMU-3 vibration under PTO

Another type of potato digger is conveyor units. Instead of a vibrating barrel, they use a special belt, moving along which the potatoes are well cleaned from the soil. Their main advantage is the speed of work and quality of harvest cleaning. The disadvantage is the fairly high price of the equipment.

Single-row conveyor potato digger KU-1s70 “Agrix” (width 70 cm, gearbox, wedge protection)

Rotary mower

Rotary mower KR-0.5 "NEVA"

A mower is an attachment that can be used to mow large areas with a walk-behind tractor, including the surface of a garden or vegetable garden when cutting grass. Mowers for walk-behind tractors vary in overall dimensions, working width, productivity (ha per hour), rotation speed, grass cutting height and weight.

Additionally, they can be equipped with knives and bolts for fastening. In modern farming, rotary mowers are used; they are distinguished by the method of attachment to the walk-behind tractor and the side of location on it, for example, in front or behind, on the side. The number of cutting devices differs for different models of mowers - from one to three. The more cutting devices, the larger the area that can be covered using a mower.

The main purpose of mowers is to mow grass, mow pastures and clear the land of weeds before the arable land is put into use.

By the way, using a mower allows you to get high-quality hay without damaging the root system of the grass.

Rotary Mower Neva - Video of work

Hillers

No less frequently used attachments for Neva walk-behind tractors are hillers. They are necessary for hilling the soil.

Hiller STV NPD Two-row hiller STV Mounted two-row hiller OND Single-row disk hiller

This type of equipment differs in hilling depth, dump wing opening, size and weight.

Hillers consist of a body, a ploughshare and wings (one or two). They are attached to the walk-behind tractor using a kingpin and a hitch using bolts. When attaching, it is imperative to set the required angle of the hiller wings, otherwise the walk-behind tractor will “lead” to the side.

You can also adjust the working depth of the manual hitch of the hiller.

Lugs

Lugs for walk-behind tractors are metal wheels equipped with special knives for blasting and loosening the earth. Perfectly suitable for arable work. Accordingly, using this type of additional parts, it is possible to cultivate a large area of ​​soil and loosen it deeply.

Important: the soil that is loosened using lugs must be working, that is, constantly used for planting crops.

Grousers can be purchased either separately or in sets with bushings for their fixation (if a bushing is included in the package). The lugs are fixed on the gearbox shaft using cotter pins.

Universal wheels KUM 540 for hilling Universal wheels KUM 540 with a long bushing Lugs N for plowing with a long bushing Metal wheels KMS for plowing Grousers N for plowing Wheels KUM 680 for hilling

For walk-behind tractors with axle-axle unlocking, it is recommended to use regular bushings; if the walk-behind tractor model has axle unlocking, you can opt for a differential bushing, which makes it easier to maneuver the equipment when turning.

Wheels

Set of traction wheels 16x6.50-8

Wheels for walk-behind tractors are part of the running system. In the basic configuration, walk-behind tractors are often equipped with wheels with high tread. Obviously, for sowing and planting crops, it is more important for the walk-behind tractor to be more stable - this position will be more effectively ensured by lugs.

But ordinary rubber wheels are indispensable when transporting goods on trailers and carts, planting and digging up potato crops.

You can replace worn-out wheels that were equipped with a walk-behind tractor at the factory quite easily - just buy ordinary rubber tires with a strong tread.

Making a segment mower with your own hands

This type of device can also be made independently. Below we will tell you how to make a mower with your own hands.

What is needed for making

To make the device you need to prepare:

• metal beam 15x50x120mm;
• knives;
• disks;
• wheel.

In addition to the materials listed, prepare standard tools: screwdriver, drill, pliers, bolts.

Step-by-step instruction

To assemble the unit yourself, you must follow the instructions:

• holes are drilled in the metal beam that will fit the M8 bolt;
• check that each blade has a segment on the back;
• make sure that the blade has a clip for the drive lever;
• fix the knives on both sides of the beam;
• attach clamps and runners to the beams;
• install the wheel on the frame.

With the help of the walk-behind tractor shaft, the assembled mechanism will move, thereby rotating the knives. They can perform both rotational and back-and-forth movements.

Homemade mowers for walk-behind tractors

Let's look at several types of homemade products.

DIY rotary mower

This type of mower is used for mowing the lawn and for cutting grass for hay.

It is important to remember that the model only trims tall plants, it only chops short grass into small pieces

The mower assembly is shown on the Neva walk-behind tractor and similar structures. To work you will need the following elements:

• chains from a chainsaw (geared);
• 2 discs from a grain-type seeder (in this version, a C3-3.6 seeder is used).

The knives are made from 65g hardened alloy. There are four knives on a separate disc. On each of the disks, slots with a diameter of 6 millimeters are made using a reinforced drill. The knives are attached using a shank; it is fixed to the opener regardless of the main knife mounting structure. There is a small gap between the blade and the shaver, about 2 millimeters greater than the thickness of the blade. Such a design solution is necessary so that when working with the mower on the walk-behind tractor, the centrifugal force spreads the knives and they cut the plants

It is important that the structure can rotate freely in a circle (360 degrees). This is necessary to protect the knife when hitting hard ground, stones

The fixation axes of the blade part are made of durable carbon steel; its diameter should not be less than 8 mm. The disc tightens the axle to the end so that nothing interferes with the movement of the blade part. Photo of rotary mower:

Next, the frame of the rotary mower is welded onto the walk-behind tractor. Discs are installed on the finished base and connected to the drive from the BOM (additional elements of the walk-behind tractor mechanism). In this version, gears from a gearbox from a VAZ car are used. The rotation of the disks is performed in a counter position, against each other. Thanks to this, the grass is cut in rows. The last step is to install the protective element on the drive.

DIY segment mower

To make a segmented mower for a walk-behind tractor with your own hands, you need a metal pipe with a rectangular cross-section of 1200-50-15 millimeters or a standard piece of braid. 12 holes measuring 10 millimeters are made on it at an equal distance from each other. They are needed for mounting M8 fixing bolts. In the future, a metal guide strip (0.89 meters long) with teeth and blades installed on all sides of the rectangular pipe will be attached to them.

Segment mower blades have backs with sections and arm cages for the drive system. Clamps and runners are also mounted on a metal base on both sides. The main wheel is installed on the chassis of the model. The working mechanism of the mower functions due to the movement of the output shaft of the operating motor. Mower drawing:

Homemade mower cart

The mechanism consists of 2 drums, they are fastened with a frame and a tape with fixation. The cart is made of welded pipes and metal corners. Plywood and wheels are placed on the frame base. You need thick plywood (you can take a sheet of metal).

The tape can be easily made from a strip of rubber; it is connected into a ring using 2 mm thick duralumin plates.

Another option for a drum mower to a walk-behind tractor is welding metal parts:

Installing a mower on a walk-behind tractor - details for beginners

Preparing the walk-behind tractor available on the farm before mowing the grass involves installing the selected mower on it.

Installation of attachments is carried out in the following order:

1. First, you need to secure the tensioning device included with the mower;
2. Next, you will need to put the device pulley on the upper clutch so that the front part of the hub “looks” at the tensioner flange;
3. After this, it is necessary to fasten all installed parts with a screw;
4. Then you need to install the mower and put on the belt, then secure the mower with pins;
5. The next step is to put on an apron to prevent grass from getting on the operator and install the protective shield back on the walk-behind tractor. The video will tell you more about installing the mower on a walk-behind tractor.

“After installing the mower, you will need to adjust the belt tension. This is done by turning the handle in the direction of movement of the walk-behind tractor. After this, you can start mowing the grass on the site.

Popular rotary mower models

Among the various models of mowers for walk-behind tractors, the most popular are Zarya in various configurations and modifications and KM-0.5 Terminator for Caiman Vario, Pubert Quatro Junior, MB-2 and MB-23 Neva, MB-1 Oka, “Mole”, “Ray”, “Favorite”.

Let's take a closer look at the characteristics of these models.

Mower KM-0.5 Terminator

Rotary mower KM-0.5 Terminator

The small mower KM - 0.5 is aggregated with walk-behind tractors "Vario" and "Junior" (Caiman Vario, Pubert Quatro Junior), MB-2, MB-23 Neva, MB-1 Oka, "Mole", "Favorite", "Luch" » trailed method. The rotor is covered on all sides with a protective casing made of durable metal. After mowing, the grass is crushed, so it is suitable for processing lawns.

Technical characteristics of KM - 0.5:

TX KM 0.5	Indicators
Working width	50 cm
Grass cutting height	5 cm
Allowable operating speed	0.5-4 km/h
Equipment weight	35 kg

Produced at the Chuvash Machine-Building Plant, in Moscow at Agromash. The price from the manufacturer starts from 12,500 rubles.

Pros:

• Availability of spare parts;
• Manufacturer's warranty 3 years;
• Service centers are located in all major cities.

Of the minuses:

• Mulches grass, so is not suitable for making hay;
• Does not work well on uneven terrain with slopes greater than 20 degrees.

“I took the KM 0.5 rotary mower for the Neva walk-behind tractor and did not regret it. The lawn in front of the house is always smooth and neat. The only drawback is the one-piece body. It’s difficult to store a massive mower.”

“The KM 0.5 mower pleases with the quality of work with the Neva walk-behind tractor. It cuts grass well, but it doesn’t always pass between bushes and fruit trees.”

Mower "Zarya" for walk-behind tractors Neva MB-2, MB-1, MKM-3 Lander, Mole, Favorite

The mounted model of a small rotary mower has two working discs with knives on hinges. Produced in Kaluga at the Kadvi machine-building plant. Mows the grass and folds it to one side. Suitable for farmers who keep livestock. The model is lightweight and small in size. Convenient to store and transport.

Mower "Zarya"

Let's look at the technical characteristics of Zarya in the table:

TX "Zarya"	Indicators
Working width	80 cm
Cutting height	Up to 10 cm
Allowable operating speed	2-4 km/h
Equipment weight	25 kg

Suitable not only for the Neva and Krot and Favorit walk-behind tractors, but also for small MTZ tractors with 10-12 horsepower. Spare knives are included in the package from all manufacturers, which ensure uninterrupted operation of the equipment during the season.

The advantages of the Zarya model include:

1. Compactness;
2. High performance;
3. Light weight;
4. Wide grip;
5. Simplicity of design;
6. Manufacturer's warranty 3 years;
7. Spare knives included.

Of the minuses:

1. The working parts are not completely covered with a protective casing;
2. Not suitable for all walk-behind tractors.
3. Knives have to be sharpened frequently.

“The Zarya mower showed itself well when preparing hay for livestock with the Neva walk-behind tractor. I prepared food for the cow for the whole winter. The job was completed 10 times faster.”

“Zarya” didn’t like it with the “Mole” walk-behind tractor, because when mowing hard, dry residues of vegetation, it often became clogged and dull. There is no protection from stones.”

The price of Zarya mowing equipment starts from RUR 13,700. In winter you can buy from dealers at a good discount. Used models cost from 6,000 rubles.

Mower Zarya-1

Rotary mower "Zarya-1"

A special model from the Kaluga Machine-Building Plant “Kadvi” is designed for the NMB-1 Ugra, “Mole” and similar walk-behind tractors with the same connection. The model has two working bodies with knives made of hardened steel. Convenient adjustment allows you to mow fields with any landscape.

The technical characteristics of the model are presented in the table:

TX "Zarya-1"	Indicators
Working width	80 cm
Cutting height	Up to 10 cm
Allowable operating speed	2-4 km/h
Equipment weight	35 kg

It differs from Zarya in the way it is connected to a walk-behind tractor and has high performance. The design is weighted, so the grass is cut more evenly. Suitable for small agricultural complexes. It is aggregated with MTZ-80 mini tractors. Easily copes with dead bushes, sunflowers and corn.

The advantages stand out:

• Low price;
• Reliability and durability;
• Easy to maintain;
• Mobility due to low weight.

One of the disadvantages is the insufficient number of service centers in the regions.

Plow

The plow as an attachment to the Neva walk-behind tractor is designed for plowing heavy and hard soil. An excellent option would be a mounted plow model P1 20/3. It grips soil up to 22 cm wide and works at a depth of up to 21.5 cm.

If it is necessary to plow the soil before planting various crops, you can also use a mounted reversible plow. Its advantage is the presence of two buildings, which prevent mistakes in tillage. At the same time, prices for devices are affordable, and reliable products will serve you for many years.

You may be wondering how to make a harrow for a walk-behind tractor yourself.

The rotating device is installed on devices weighing 100 kg. If the walk-behind tractor weighs less, you can use a weighting agent. This plow can cover soil 19-23 cm wide and will help to quickly carry out soil preparatory work before planting.

Dimensions of the hitch for the Neva walk-behind tractor

The best professional riders and garden tractors

AL-KO Solo T 15-103.7 HD-A

With such gardening equipment you can quickly mow the grass even in a large garden area. After all, the deck of the AL-KO Solo T 15-103.7 HD-A has a width of 103 cm. There are 6 positions with which you can select the optimal mowing height. There is a capacity of 220 liters for collecting mowed grass. You can empty this container directly from the driver’s seat using the telescopic handle. You can also easily install additional equipment on the front. For example, shields for snow removal.

The engine power of this rider is 7.8 kW, which indicates good performance of the equipment. The width of the AL-KO Solo T 15-103.7 HD-A tires reaches almost 50 cm. This gives good traction and good protection against slipping. To work in the dark, the manufacturer installed headlights that will perfectly illuminate the area being treated.

The average cost is 220,000 rubles.

AL-KO Solo T 15-103.7 HD-A Advantages:

• Possibility to install additional hanging equipment;
• Mulching function;
• Sound indication when the grass catcher is full.

Flaws:

The maximum speed does not exceed 4 km/h.

Viking MR 4082.2

If you want to not only mow the grass, but also enjoy the process, then the Viking MR 4082.2 will be the ideal option. The engine of this model is installed behind the operator’s seat, thanks to this you can better control the work process, and it will also be convenient to work in tight spaces. For example, between trees or bushes.

"Viking MR 4082.2" has a mulching function. To do this, replace the cutting deck with a wedge. The shredded grass will be evenly distributed throughout your lawn. The mowing width is 80 cm. And the grass cutting height varies from 35 to 90 mm. There is a capacity of 250 liters for collecting grass clippings. It can be emptied directly from the operator's seat.

For comfortable operation of this unit, the manufacturer installed an automatic transmission. The driver's seat can be adjusted in height and has a low step for comfortable entry. It also has plenty of legroom, so even a very tall person will find it comfortable to work on such equipment.

The average cost is 285,000 rubles.

Viking MR 4082.2 Advantages:

• Automatic transmission;
• Large volume of grass catcher;
• Small turning radius;
• It is convenient to control the entire work process.

Flaws:

High price.

MasterYard CR1638

This model of garden equipment from a Czech manufacturer has a compact size, making it highly maneuverable. "MasterYard CR1638" can be used on the farm throughout the year. In the summer, you can use it to mow the lawn, and in the winter, remove snow. To do this, it will be necessary to install a collapse and chains that will make the rider’s movement safe. Using the MasterYard CR1638, you can cultivate an area of ​​up to 0.8 hectares, and it is worth noting that this unit can move along slopes with an inclination angle of up to 10 degrees. The rear part of the device has a towbar, now installing towed equipment will not be difficult.

"MasterYard CR1638" has a powerful single-cylinder gasoline engine that is easy to start and can operate in difficult conditions. Due to the fact that it uses an overhead valve mechanism, fuel consumption is reduced and engine life is extended.

The cutting deck has a special shape and a special arrangement of knives. Therefore, such a rider can easily cope with tall grass. The entire cutting will be placed in a grass catcher, the capacity of which is 300 liters. When the container is full, the operator will receive a sound signal. The cutting width is 92 cm and the minimum cutting height is 30 mm.

The average cost is 260,000 rubles.

MasterYard CR1638 Advantages:

• The turning radius is 36 cm;
• There is a tow bar;
• Possibility to use all year round, changing attachments;
• Small dimensions;
• Economical fuel consumption.

Flaws:

No.

Devices for transport functions and area cleaning

Thanks to the sufficiently high engine power and the presence of four speeds, using an adapter for the Neva walk-behind tractor, the unit can be easily converted into a mini tractor. This option will be especially useful for working in very small areas, in the garden or on a farmstead.

The coupling of the Neva walk-behind tractor with a trailer will be more lifting and faster. For heavy MB23S, SD, the weight of the cargo transported in the trailer can reach 400 kg. For the usual second series of the Neva MB 2S motor unit, the trailer attachment will allow you to transport up to 150 kg.

In addition to the listed attachments, it is necessary to mention a motor shovel or a blade for the Neva walk-behind tractor. As can be seen from the photo, the design of the device is a wide profiled metal shield, which is installed on a guide pipe located in front of the Neva. A handle is attached to the upper edge, allowing you to control the position of the shovel when moving the walk-behind tractor.

The power of the Neva is such that at first speed the motor unit can easily remove with a shovel a layer of soft earth 10-15 cm high. Using the blade attachment, you can easily plan an area of ​​sand or bulk soil. Another interesting use of the attachment is snow removal, cleaning small areas of the yard and adjacent roads.

For cleaning fresh or compressed snow, a rotary snow blower for the Neva walk-behind tractor is best suited. Thanks to the drive, the rotary mechanism of the nozzle allows not only to cut off a layer of snow, but also to effectively throw the snow mass away from the route of travel.

In addition to the rotary attachment, you can use a rather unusual, but highly effective attachment for the Neva walk-behind tractor in the form of a drum brush to clear the area of ​​snow and dirt. The rotating rotor of the attachment is driven by a power take-off belt from one of the pulleys on the motor. The Neva walk-behind tractor mounted on wheels with an attachment is capable of high-quality cleaning of asphalt from ice and compressed snow at a speed of 5-7 km/h.

Using the control handles, the operator can adjust the degree of pressing of the rotating brush of the nozzle to the ground and thereby improve the quality of surface cleaning. Cut ice and dust are thrown out with a brush in front of the motor unit, so during cleaning you will need breaks to collect dirt. Considering the high speed of the drum, you should use the brush head only when there are no people on the route of the device.

Products from domestic manufacturers

A walk-behind tractor is an agricultural machine, highly efficient, very convenient and compact. It is easy to operate, performs various functions over large areas of the earth and requires a minimum amount of fuel for its operation. Motoblocks from MTZ (Minsk Tractor Plant) are successful throughout the entire territory of the former USSR, as well as far beyond the borders of our country.

The mower is used in agriculture primarily for harvesting grass, an essential component of preparing the soil for planting crops, as well as for harvesting. Has a segment or rotary mechanism of operation. The device mows vegetation from fields and meadows, greatly facilitating human labor.

When choosing a mower model, you will need to familiarize yourself with its capabilities. If your choice fell on the MTZ walk-behind tractor, there is no doubt about the quality, which means that all that remains is to decide on the choice of tool. A lot of information can be obtained from videos that clearly show the principle of operation of the device on the Internet.

The mechanical difference between rotary mowers and segment mowers is, first of all, that the latter are better used on those plots of land where the land has not been cultivated for a long time. It is suitable for cutting reeds, young growth or dead wood. But it should be noted that after the work the grass is not laid as smoothly as after a rotary type tool. But the rotary type is not always able to cope with the volume and complexity of work as the segment type.

Trailed aggregators for walk-behind tractors "Neva"

Weeder-rippers Rotary brush ShchRM-1 Adapter APM Harrow BD 850 Moto-block water pump NMTs Moto-block mounted blade NNM

Trailed aggregators for Neva walk-behind tractors include:

• snow blowers;
• trailers;
• couplings;
• weights.

Snow blowers

Snow blower SMB "NEVA"

With the help of this type of equipment it is possible to carry out winter cleaning work on land plots.

Using a snow blower will help you quickly clear a large area, and not necessarily the territory of a plot of land, but also open space, for example, the courtyard of a private house, a lawn, or areas of a garden without trees.

Trailers

A useful item in agriculture is a trailer.

Trailed trolley TPM-M Trailed trolley TPM Trailed trolley (VRMZ) Biaxial trailed trolley for the APM adapter Single-axle trailed trolley for the APM adapter

An indispensable addition to the walk-behind tractor, allowing you to harvest crops, restore order on a plot of land, transport small and medium-sized loads around the territory of your dacha, etc. Trailers vary in capacity (small ones are usually called trolleys), loading capacity, and overall dimensions.

Hitches

The hitch is a universal fastening spare part for coupling any type of attachment to the Neva walk-behind tractor.

Double universal hitch

It is not supplied in kits and must be purchased separately. You can order a hitch at the time of purchasing a walk-behind tractor or when purchasing any type of additional functional parts.

Weights

Weighting agents are used to give the walk-behind tractor more weight, therefore, to enhance the impact of trailed equipment on the ground, in particular, on indicators such as the depth of plowing the soil, lowering the level of grass mowing, digging potatoes at greater depths, etc.

Weighting weight "Neva" Weighting weight

Simply put, with the help of a weighting agent you can make the walk-behind tractor heavier, and therefore more powerful in its impact on the ground. An example is a ten-kilogram weighting weight for the Neva walk-behind tractor, installed on wheels, or a weighting weight weighing 17 kg, fixed on a walk-behind tractor pin.

How to make a mower for a walk-behind tractor with your own hands?

It often happens that for some reason the manufacturer does not have a special mower on sale specifically for this model, or that it does not suit its characteristics. In this case, it is not difficult to work on a homemade version. Full production on the basis of one's own farm will be demonstrated using the example of segmental variation.

https://youtube.com/watch?v=yGXvXYgnbVs

From spare parts, first of all, you need to take a rectangular pipe 5x1.5, 120 cm long. An ordinary piece of an old braid will also do. About 12 centimeter holes are drilled on the pipe at equal distances, as the drawings show.

You should prepare a frame from welded corners and pipes; the frame can be covered with plywood and wheels can be attached to it. The tape is made of rubber ring-shaped. It is convenient to secure it with duralumin plates. Clamps are also welded onto the frame to install the cutting strip. For the latter, a strip with metal blades is attached to a pre-prepared pipe with holes using M8 bolts.

Equipment for working with potatoes

https://youtube.com/watch?v=4nnDzp3OBgU

In spring it's time to plant potatoes. To make this process easier, you can get a potato planter. This is an attachment that is designed for planting potatoes. It is equipped with a special plow, a container for potato tubers and a hiller.

Note! The plow creates a trench into which root crops are poured at an equal distance, and the hiller covers the tubers with earth.

This equipment is noteworthy in that it can be adjusted:

• distance between tubers;
• landing depth;
• hilling height.

This unit will make it easier to plant potatoes, beets and other root crops; it is easy to use and accessible to almost every summer resident. A potato digger will help you collect potatoes. It is lightweight, inexpensive and applicable to any type of walk-behind tractor. It has a heart-shaped shovel and teeth in its design. The shovel digs under the tubers and pushes them out. The soil crumbles between the teeth and the potato digger leaves the owners only to pick up the potatoes behind them.

Selection of materials for making a homemade mower

Scheme of the segment mower KSF-2.1.
The main material for making homemade mowers is metal. There is scrap metal in every home and every farm, which significantly reduces both the cost of the product and simplifies the choice. In this case, you can use almost any metal, for example, scraps of steel pipes, bicycle frames, car remains, etc. Welded frames from openings of industrial buildings, etc. can be used as the basis of the mower. It is recommended to pay attention to the various metal residues that are present. After all, even minor elements can be put to use

You should inspect the mounting point of the walk-behind tractor or mini tractor in advance and select fastenings for it. It is best to purchase a ready-made element from the tractor manufacturer - this will significantly simplify the work and avoid problems in the future.

Tools should also be prepared. The main tool is a welding machine; a drill, pliers, hammer, etc. may be required. However, almost all elements are attached by welding. It is recommended to take care of purchasing whetstones or wheels for sharpening knives. It is recommended to make the knives themselves from steel 65x13 or 95x18.

Description

There are two types of these attachments for MTZ walk-behind tractors:

Motoblock MTZ-09N

Segmental

They cut the grass thanks to two rows of sharp knives that move towards each other.

Segment mowers are primarily designed for processing densely overgrown lands with a large amount of thick grass, reeds, and dead wood. After mowing, the grass lies in a chaotic order.

Rotary

Their operating principle is based on rotating knives. They allow you to carry out work faster, but cannot cope with such a load as segment ones. Rotary mowers are designed to work in manicured areas. The grass after them lies in an even layer behind the walk-behind tractor.

Rotary

The official manufacturer MTZ offers two options for rotary mowers.

KRM-1

Used for treating lawns in parks and gardens. It is used extremely rarely in agriculture or industry, most often for cleaning small weeds. It is attached to the gearbox of the MTZ-09N walk-behind tractor.

Rotary mower KRM-1

Feature of the KRM-1 rotary mower

• The design provides three knives, which are located along the perimeter of the disk at the same distance.
• A plus is the ability to change knives after they become dull. To do this, you need to remove the lower half-disc, unscrew the bolts and change the knives. This is all described in the instructions for use.

• It is possible to install the braid on the side.
• The total weight of the structure is 45 kg.
• The operating speed of KRM-1 together with Belarus is usually up to 2.5 km/h.
• The width of the treated surface is 60 cm.

KRM-2

Designed to work specifically with large areas. It mows the grass evenly and accurately, and its high productivity allows you to work with large areas. This model is larger than KRM-1.

Rotary mower KRM-2

Feature of the KRM-2 rotary mower

• The working width is 74 cm, which is 14 cm longer than the first model.
• Thanks to the wide grip, productivity increased by 450 m2 per hour.
• The operating speed of Belarus together with KRM-2 is 2.5 km/h.

Installation components

No additional components are needed for their operation. They are delivered in disassembled condition. Assembly must be carried out according to the instructions for use.

Review of the coupling of the KRM-1 mower with the MTZ walk-behind tractor

Segmental

Unfortunately, this option is not represented by the Smorgon plant and is not very popular among other manufacturers.

Segment mower

The reason is that they are less safe to use and do not protect the operator in any way. In addition, the scattering of grass occurs widely and it is not necessary to mow dense thickets of grass often. They have a large width, so maneuverability is significantly reduced.