On the streets of modern cities you will no longer surprise anyone with the presence of various snow removal equipment. Utility services use it to clear roads from snow mounds, as well as to transport the removed snow outside the city.
But there are other representatives of similar equipment - household snow blowers . Of course, they have much less power compared to large equipment.
The main advantages are their mobility and simple operation , which can be handled by anyone, even those without the proper skills and technical education. Among such equipment we can highlight the Champion 656 self-propelled petrol , which will be discussed.
Description of the snow blower Champion
The Champion st656 snow blower is a device for clearing an area from freshly fallen, uncompacted snow.
The model consists of the following nodes:
- frame;
- motor with muffler, air filter;
- gas tank;
- augers;
- gutters with a deflector for snow ejection;
- levers - turning on the drive, turning on the augers, controlling the chute, shifting gears;
- ignition switch;
- oil level sensor;
- cover and dipstick covering the tank neck and oil drain plug.
The package includes a gutter cleaning blade that is mounted on the auger housing.
The equipment is used to clear snow from paths, sidewalks, parking lots, driveways, parking lots and areas in front of social facilities. The device is designed for domestic use and does not belong to professional equipment.
Application area
The Champion 656 snow blower belongs to the category of self-propelled units powered by a gasoline engine. This circumstance allows this snow blower to be used in many areas and areas:
- Use for clearing snow cover from the area adjacent to the house, regardless of the scale.
- Clearing snow in the most inaccessible places where larger snow removal equipment cannot reach.
- Cleaning specific surfaces (gravel, tiles, etc.).
- Clearing snow from vehicle parking lots.
- Use for cleaning training complexes and sports facilities.
- Use not only at the domestic level, but also in the public sector.
This unit, like Husqvarna, forte qi jy 50, cmi 163, snow fox sf16353l, lux 163, Patriot, Champion, Honda, Foreman, mtd, copes well with small snow drifts and snowdrifts , but certain difficulties may arise in cleaning the melted surface, or heavily compacted snow flooring.
In such cases, the optimal solution would be preliminary surface preparation, i.e. loosening with a handy tool, a pick, so that the snow blower can easily process the snow cover.
For more information about the Champion 656 self-propelled gasoline snow blower, watch the video:
Advantages and disadvantages
Advantages of the Champion st656 snow blower:
High engine power, which is 6.5 liters. With. It is enough for cleaning small areas.- Thoughtful design. All control levers are freely accessible.
- Sufficient snow throw range (up to 12 m) and a rotating chute.
- Ergonomic design and economical fuel consumption, which is 0.8 liters per hour.
- The frame and bucket are made of high-quality metal, which is equipped with stiffeners.
- Simple controls.
- Wide wheels with deep tread. They allow the vehicle to pass even through areas with difficult terrain.
The disadvantages of a snow blower include:
- The need to manually start the starter.
- Difficulties with maintenance. If you can’t handle the breakdown yourself, finding a professional repairman in some cities is problematic.
- Lack of rubber pad on the control handle. It will be cold to work without gloves in winter.
- Lack of a headlight, which would be useful for clearing snow in the evening.
Characteristics
| Snow blower model | ST656 |
| Engine model | G160HK |
| engine's type | 4 stroke |
| Engine capacity | 163 cm.cub. |
| Engine power, hp/kW | 5,5/4,1 |
| Fuel tank volume | 3.6l |
| Crankcase volume | 0.6l |
| Working width | 56 cm |
| Grip height | 51 cm |
| Number of gears (forward/backward) | 5/2 |
| headlight | No |
| Weight | 72 kg |
Assembly
The Champion st656 snow blower is assembled as follows:
- The steering wheel is installed on the frame, secured with bolts and nuts included in the kit;
- fix the auger drive cable by the hole in the switching lever - for this it is equipped with a special hook;
- attach the gear shift lever to the platform;
- install and secure the snow discharge chute;
- attach its control lever using a bracket;
- install auger shear pins and slides to adjust the height of the auger box.
They check the reliability of fixation of all elements and begin to launch the equipment.
Snow blower Champion ST 656 – mobility and ease of operation
On the streets of modern cities you will no longer surprise anyone with the presence of various snow removal equipment.
Utility services use it to clear roads from snow mounds, as well as to transport the removed snow outside the city. But there are other representatives of similar equipment - household snow blowers . Of course, they have much less power compared to large equipment.
The main advantages are their mobility and simple operation , which can be handled by anyone, even those without the proper skills and technical education. Among such equipment we can highlight the Champion 656 self-propelled petrol , which will be discussed.
Preparing for launch
Before putting the device into operation, it must be prepared. To do this, perform the following steps:
Check the oil level in the catheter. If it is not enough, the composition is topped up. Normally, it should reach the bottom edge of the neckline.- Adjust the height of the snow fence. This is done using a pair of skids that are located on the outside of the snow casing.
- Check the operation of the levers, the inclusion of travel and rotation of the auger.
- Check the auger and impeller. There should be no ice on them, which could lead to damage to the device.
- Pour gasoline into the tank. It can only be refilled indoors with good ventilation or in the open air. Do not pour gasoline to the brim, as it expands when heated. AI-93 grade fuel is used for refueling.
Peculiarities
Champion equipment is one of the most reliable. All spare parts for it are produced in the United States, and the devices themselves can be assembled either in the USA or in China. At the same time, Chinese assembly is not an indication that the product is worse, since the spare parts still remain original. There is a wide range of different Champion technical devices on the market for both domestic and professional use. Snow blowers belong to one of the most popular categories, because in Russia winters are usually snowy, but not everyone is ready to spend several hours a day on manual cleaning. This is where a mechanical snow blower comes in handy.
The brand’s product line includes self-propelled and non-self-propelled, gasoline and electric, wheeled and tracked vehicles - the choice is huge. In addition, the power of the vast majority of snow removal equipment is such that it can be used not only in everyday life, but also for cleaning streets, roads, and sidewalks. The cost of Champion units is reasonable and fully consistent with the quality, which also helps to increase demand for them.
How to launch and use?
Instructions for starting the snow blower:
- To put the device into operation, you need to open the fuel valve by moving its lever to the “On” position. If the engine is cold, the choke lever should be left closed. When the engine is warm, it should be open.
- The gas lever is moved to 1/3 stroke.
- Press the fuel primer 3 times, then turn the switch to the “On” position.
- Turn the crankshaft using a manual starter. When resistance is felt, its handle is slowly pulled down. Then the engine is started with a sharp movement. If it was not possible to do this the first time, the procedure is repeated.
- When the engine starts, the starter handle is slowly returned to its original position.
- After the engine warms up, the air damper is opened. On average this takes about a minute. Then the gas lever is moved to the “Hare” position.
Instructions for use of the device:
- the snow blower can be moved either forward or backward - you cannot pull it in the opposite direction, so as not to damage the wheel drive;
- You cannot use the equipment on surfaces with a slope of more than 10 degrees;
- when removing snow on paved sidewalks and pedestrian paths, the casing must be lowered lower to the surface of the ground;
- to clean rocky and uneven areas, the casing is lifted up - this will avoid the capture of stones and other debris;
- After cleaning is completed, the engine is left running for a few minutes to remove any remaining snow and prevent the impeller from freezing.
User manual
The Champion 656 snow blower has similar operating rules to the Huter, Craftsman, Stiga, Tselina, Lynx snow blowers, as well as safety standards when performing work with similar self-propelled units presented by other companies.
This device is a technically complex unit , so compliance with these standards will not only increase its service life, but will also protect you and others from possible harm.
Complex snow blower unit
Snow blower Champion 656 has the following instructions :
- It is strictly prohibited to immerse or hold near those areas of the unit where there are rotating structural elements. Failure to do so may result in serious injury.
- It is necessary to monitor the condition of individual parts of the structure. If there is the slightest hint of a malfunction, work should not begin until the problem is resolved.
- The snow blower engine should only be started outdoors to avoid poisoning by toxic exhaust.
- Only those persons who have read the instructions and are familiar with basic safety precautions are allowed to operate the unit.
- Persons under the age of majority, as well as citizens under the influence of alcohol and drugs, are not allowed to operate. Before starting work, you should avoid using potent drugs that affect the coordination and psyche of a person.
- There is no need to touch the engine during operation, because it tends to get very hot during operation.
- Particular attention should be paid to those areas where there are various slopes and rises. It is not recommended to clean in areas where significant surface slopes are visible.
Correct direction of the gutter - Make sure that the discharge chute is not directed towards glass surfaces or other valuable property.
- During operation, make sure that there are no people or animals nearby. The normal distance to them is 10 meters.
- Do not overload the engine by taking short breaks in operation.
- It is best to clear snow during the daytime. With the onset of twilight, visibility deteriorates sharply, which can lead to the fact that you simply cannot see the person standing next to you.
- Work at minimum speeds.
- Wear suitable clothing when operating the snow blower, i.e. warm and comfortable. Shoes should not be slippery, and use goggles to protect your eyes.
- Learn ways to quickly stop the unit so that, during emergency situations, you can quickly turn off the snow blower.
- Before starting work, remove all excess from the surface you want to clear of snow.
Objects such as stones and small pieces of boards, when flying out of the gutter, can cause harm not only to property, but also to the health of others.
Special attention should be paid to the fuel used . Remember that it is not only flammable, but also toxic. In this case, basic safety rules are quite enough for safe handling of fuel.
How to serve and store?
Storage and maintenance features:
Every 300 hours of operation, condensate must be removed from the fuel tank and flushed. To change the oil, place the device on a flat surface.- When starting the device for the first time, oil is poured into it 5 hours before turning it on. The second replacement is performed after 25 hours of operation, and the subsequent one every 50 hours.
- Before sending for long-term storage, the equipment is preserved and the engine oil is changed.
- After each use, the chute from which the snow comes out is thoroughly cleaned.
- Remove dust and dirt from the spark plug, check the integrity of the electrodes and insulation, and replace the part if necessary.
- Lubricate the drive gear responsible for turning the chute.
- The equipment is stored in a clean, dry room with air humidity of no more than 80%. If possible, the apparatus is covered with a tarpaulin.
All work to prepare equipment for storage is carried out only with a cold engine.
Snow blower Champion ST1376E
The Champion ST1376E snow blower is a powerful unit equipped with a gasoline four-stroke single-cylinder engine with a capacity of 13 horsepower.
Snow blower Champion ST1376E
The air cooling function of the motor allows you to increase the operating time of the Champion ST1376E several times. It is recommended to use gasoline with an octane rating of 92 or more as fuel for a snowblower.
Launching is carried out in two ways:
- Manually - just use the manual starter by pulling the corresponding handle.
- From a 220 V power supply - the electric starter is connected using a plug to the electrical network and the “start” button is pressed.
The Champion ST1376E model is equipped with a wheel drive with powerful treads that provide reliable traction of the snow blower to the ground and prevent slipping and slipping. High maneuverability of the Champion snowplow is ensured by a differential lock.
Engine Champion G390HK
The presence of eight speeds has improved the performance characteristics of the unit; now the gearbox has 6 forward and 2 reverse speeds. Heated handles were also useful, adding comfort to the operator even in the most severe cold.
A 15 W headlight is capable of brightly illuminating the area in front of the snow blower so that the area can be cleaned with the highest quality possible.
The unit removes different types of snow:
- freshly fallen;
- stale:
- melted;
- crust;
- ice, etc.
Powerful serrated auger blades easily cut even icy crust, after which the impeller crushes the ice and throws it out with the snow masses. A special lever allows you to adjust the lifting height of the bucket, offering three positions, one of which is used only for transporting the snow blower to the work site.
The gutter deflector is also adjusted, throwing snow masses in the desired direction at a certain angle.
Reviews
Users respond positively to the Champion st656 snow blower model. They are satisfied with the price-quality ratio and the reliability of the device.
The machine is easy to operate, starts on the first try , and does not require frequent replacement of the spark plug. The equipment is great for cleaning adjacent areas, paths and paths.
The disadvantages include the lack of headlights, as well as the fact that the car has difficulty coping with melted snow. Although the manufacturer indicates that it is not intended for this purpose.
Snow blower Champion ST1170E
For most of our fellow citizens, the existence of household snow removal equipment is not news; rather, it is a necessity due to constant care for the areas adjacent to a residential building, organization or supermarket. The larger the organization, the larger the parking, the wider and longer the entrances and exits and approaches...
Snow blower Champion ST1170E
In conditions of constant snowfalls, you cannot do without this machine, but which snowblower to choose, since there are many manufacturers whose equipment deserves attention? Let's focus on the Champion ST1170E snowplow from an American manufacturer, but assembled in China.
Snow blower Champion ST1170E
Every year, new models of snow throwers appear on the snow removal equipment market, which greatly make life easier for their owners. In recent years, the Champion ST1170E snow blower has become very popular. Equipped with a powerful motor, this model is able to cope with the most difficult tasks of clearing both freshly fallen and old snow. It can be used both for clearing private courtyards, driveways, and for removing snow from sidewalks, park alleys, pedestrian streets, courtyards of apartment buildings and public buildings.
Snow blower Champion ST1170E
Champion is a Russian brand; the company announced itself on the market of gardening and farming equipment in 2005. The concern's production facilities are located in China. However, the latter circumstance in no way affected the quality of the instruments produced. It should be borne in mind that the Champion company works closely with other well-known manufacturers of garden equipment, purchasing components for their products from them.
