Equipment rental > Wheeled mini loaders > Bobcat S530
Rental price Characteristics Features Video Photo Bobcat S530
The Bobcat S530 is distinguished by high performance, low weight, comfort, and ease of maintenance. Compact, durable, ultra-reliable mini loader is perfectly adapted for working in hard-to-reach places.
| Model: | Bobcat S530 |
| Weight: | 2820 kg |
| Climb: | 3023 mm |
| 8000 rub/shift | |
Order
The new model, created on the basis of the Bobcat S175, will have improved connections, body, frame, hood, and strengthened hydraulics. Front door visibility has been increased by 15% (though it has become easier to break), and the size of the side windows has also increased by 17%. The engine compartment is lowered, the wings are lowered. Because of these engineering solutions, the visibility of the rear window has increased and there is no need to install side mirrors on the boom; one panoramic one in the cabin is enough. The vertical lift loader is optimized for a lifting capacity of 895 kg and for carrying medium-heavy loads, such as pallets of foam blocks. If you need to move something heavier, such as pallets of bricks (weighing 1.1-1.3 tons), then it is better to rent a heavier bobcat, for example a Case SV300. Let's return to the Bobcat S530. The loader cylinders are powered by a hydraulic pump with a flow rate of 65 l/min, allowing parallel operation of the bucket and boom without slowing down these operations. The wheels rotate due to two gearboxes with full reverse, connected to two hydrostatic pumps with pistons and smooth regulation. Increasing the wheelbase by 50 mm (now 1080 mm) gave greater stability, especially when driving on slopes (the maximum surface slope of the Bobcat S530 is 34 degrees).
Specifications
The Bobcat S530 perfectly combines small dimensions (width - 1700 mm; length with a standard bucket - 3370 mm, height - 1970 mm) and significant productivity (load capacity 869 kg). Compared to the previous generation, the loader received an increased lifting height (3900 mm). The tipping load of the equipment was 1700 kg.
Other parameters of the Bobcat S530 model:
- weight – 2815 kg;
- travel speed – 0-17.3 km/h;
- wheelbase – 1082 mm.
Advantages and disadvantages
The Bobcat S530 loader is a middle class of special equipment. It has a lot of advantages, the main ones:
Mini loader BOBCAT S53
- long service life,
- high performance,
- economical use,
- small size.
Manufacturers have improved its stability on uneven surfaces by slightly lengthening the wheelbase compared to the previous model. This change also has a positive effect on the maneuverability of the loader when working with a load.
To lift the boom, a three-point mechanism operating in a vertical plane is activated. This allows you to lift loads on floors during the construction of high-rise buildings.
The movement and manipulation of the arrow is smooth. When working with heavy loads and in difficult conditions, the equipment retains its properties. If necessary, you can change parts of the machine - the boom, the hydraulic system, the cabin.
Engine
The Bobcat C530 is equipped with a diesel 4-stroke 4-cylinder turbo engine model Kubota V2403-MDI-E3B with a liquid cooling system. This power plant combines light weight, durability, high performance and simplicity of design. The Kubota V2403-MDI-E3B unit is distinguished from analogues of other brands by:
- instant start via electronic starter;
- environmental friendliness of the exhaust;
- almost complete combustion of fuel in the working chamber;
This motor has a closed ventilation system and glow plugs with automatic activation.
Parameters of the Kubota V2403-MDI-E3B unit:
- working volume – 2.196 l;
- power – 36.5 (48.9) kW (hp);
- maximum torque – 150 Nm;
- speed – 2760 rpm;
- cylinder diameter – 87 mm.
What can be included with
There are two types of additions to the standard loader kit: for special working conditions and for specific tasks.
If it is necessary to use the machine in specific conditions, the following are intended:
- booms with higher lifting capacity;
- special cabins, hydraulic systems;
- rear hydraulic outrigger;
- hydraulics with higher flow;
- heavy-duty tires;
- ultra-high flotation tires;
- tires for extra-heavy operating conditions.
In addition to several types of buckets of different types and sizes, intended for various types of work, there is a large number (more than 50 items) of auxiliary equipment. A few examples: snow blower, water sprinkler equipment, circular saw and router, shredders and much more.
Photo
Attachments for Bobcat S530
- A snow blade is a device for clearing the road surface, including sidewalks and driveways, from snowdrifts. The simplest snow plows are equipped with a mechanical turning mechanism, which requires the operator to leave the cab to adjust the angle of the blade. However, there are more advanced hydraulically driven blades on the market. In this case, the blade is controlled from the cabin using a special lever.
- Pallet forks are a loading device. A standard tool for a front-end loader, thanks to which it turns into a forklift capable of unloading and loading cargo located on pallets. Pallet forks are usually called loading forks, meaning their loading purpose.
- Telescopic boom for the Bobcat S530 front loader, designed to lift various cargo containers weighing up to two tons. The boom has a crane hook mounted on a hinged support. The hinged support, in turn, is needed to rotate the hook in different planes.
- A pipe grabber is one of the devices for a front loader, in demand among organizations whose specialization is the production, storage and recycling of pipes with a diameter of 300-400 mm. This option is presented in the form of a fork with a holder – a clamp. This attachment can work with pipes that have a protective film applied to them. Thus, the hydraulic gripper in question is widely in demand in industry, in construction, and is intended mainly for gripping, transporting and storing pipes and other similar products of comparable shape and dimensions.
- Front bucket – installed at the front. As its name suggests, it is a specialized option for front loaders. Used for cleaning and clearing snow-covered areas.
- The dozer blade is a powerful tool that can give the Bobcat S530 mini loader the capabilities of a bulldozer. The advantages of this option are the rotary function, thanks to which you can adjust the angle of rotation of the blade relative to the front axle of the loader. In this way, you can choose the direction of ejection of snow, garbage, sand and other bulk materials. In particular, there are options for forward, left or right ejection.
- A double-jaw bucket is a device consisting of two working “jaws” that close together using a hydraulic drive. There are several modifications - for example, a bucket with a gripper. It is suitable for loads weighing up to 4000 kg. In this case, the density of materials can reach 1200 kg per cubic meter. m. In particular, it can be wood chips, loosened haylage, rags, paper materials, garbage, manure, etc. Using a gripper, the loaded materials are pressed so that they do not fall out during loading or transportation.
- A brush is a primitive and very useful option for cleaning urban and agricultural areas from dust, dirt, debris, etc. It can be used along roadways, on sidewalks, in residential and agricultural areas.
- Grab forks – designed for a lifting capacity of up to four tons. There are several types, but the most popular are agricultural forks. With their help, you can immerse fibrous materials with a density of 800 kg per cubic meter. m (hay, mown grass, flax fiber, rags, straw, etc.).
- The cradle is an assembly work platform, one of the most atypical devices for a front loader. Using the cradle, you can rise to a certain height and perform various construction and repair work indoors with high ceilings, as well as finishing facades or other high-rise work.
Device
For the Bobcat S530, the manufacturer has prepared a new frame design that significantly increases visibility, functionality and performance.
The hydraulic system of the loader has also undergone changes. Thanks to the Bob-Tach mounting system, changing equipment has become much easier. For its new flagship, the brand offered a wide range of additional devices (drill, pallet grab, landscape rake, grab and others). Hydraulic pumps in technology are selected taking into account the load capacity and cylinder size. This factor reduces the machine's operating cycle.
For the Bobcat C530 model, 70% of the load falls on the rear, 30% on the front. This allows the loader to turn faster and extends tire and transmission life. Hydrostatic piston pumps provide continuously variable gear changes. The Bobcat S530 is valued around the world for its structural strength and superior design.
According to the manufacturer, the key advantage of the new series is the improvements associated with the operator's cabin. Moreover, the advantages manifested themselves not only in comfort, but also in visibility indicators, which received an additional 30% in all-round value.
The front door, made entirely of glass, was enlarged by 45%. The step again acquired a different position, positioned above the cross beam of the boom. Entering and exiting the Bobcat C530 has become much more convenient.
The loader operator's cabin itself has added 40 mm in width and has become taller. In order to maintain the compactness of the equipment, the height of the Bobcat S530 was left the same. To increase the level of safety, orange handles for emergency opening have appeared on the glass of equipment.
The operator's cabin ventilation has become quieter and has an expanded temperature control system. The HVAC (heating, ventilation and air conditioning) complex again performs the function of pressurizing. When the door of the loader is opened, air tends to flow out, blocking dust from getting inside.
The Bobcat S530 operator's cabin is equipped with a comfortable, sprung seat, which can be adjusted in all directions. The chair is characterized by a 50% increased forward and reverse range. Functionally, the manufacturer offers a seat with Air-ride air shock absorbers. The operator's cabin space has increased by 10%, and sound transmission has been reduced by 60%.
The Bobcat S530 is controlled by:
- through one of the control systems (SJC discrete joystick, AHC hand controller or ACS system);
- manually using two levers.
The American brand was the first to introduce a fundamentally new method of controlling loader equipment that does not require an operator to be in the operator's cab. The innovative solution made it possible to carry out work in dusty and dirty conditions with minimal harm to the driver’s health. Bobcat C530 is again equipped with two additional halogen lamps with an optimized reflective socket.
Description
The production of the Bobcat S530 mini-loader began in 2013. The new model replaced the S175 - it was at the peak of popularity for a long time, but over time it became outdated in terms of technical characteristics. The predecessor received special recognition in Russia for easy operation and comfort in harsh weather conditions. In the new Bobcat S530, these qualities are further improved, and, in addition, some technical innovations are added.
These mini loaders can be successfully used for different needs:
- construction;
- public utilities;
- Agriculture;
- excavation work.
It has become more productive, multifunctional, and the operator's visibility in the cab has increased.
Bobcat S530 at work
Operator's cabin
Operator comfort is one of the main factors in the success of Bobcat models. The S530 is no exception, boasting an even more comfortable cabin, even compared to the by no means small one of the S175.
It gives the driver greater visibility, achieved by increasing the rear window by 14%, and the windshield by a hard to imagine 43%.
These sizes of sight glasses make work as convenient as possible when loading vehicles or using various attachments.
The internal volume of the cabin has been increased by 10%, which allows the operator to comfortably fit in it. In addition, thanks to the use of new technologies and insulating materials, the sound permeability of the cabin is reduced by more than one and a half times.
The air suspension and air cushion built into the seat smooth out vibrations and vibrations during operation, adjusting to the driver's weight.
Hydraulic system
The use of the Bob-Tach installation hydraulic system has meant that the process of replacing used attachments can be performed several times a day, since its duration has been reduced to several minutes. This has led to the further versatility of the loader, making it indispensable thanks to its multitasking capabilities.
The dimensions and power of the hydraulic pumps are optimally matched to the cylinder size and load capacity, which ensures maximum efficiency during operation of the entire system.
S630
The model set a line of units with larger frames and reduced consumption of fuels and lubricants. The Bobcat S630 has increased the length of the base and added the ability for the working tool to make radial turns. Thanks to this, the machine operates more efficiently in difficult conditions and is equipped with a large number of replaceable equipment.
Bobcat technical characteristics:
- dimensions - 3.5 x 2.0 x 3.9 m;
- total weight - 3.50 tons;
- height: to which the bucket rises - 3.07 m;
- on which the bucket is unloaded - 2.4 m;
