KMZ 8136 technical characteristics. Production Association Kurgan Machine-Building Plant. Model range and prices

If you need to install an additional trailer hitch socket, it must be mounted in the towbar socket. Connecting the towbar socket to a car with an electronic control unit is best done by an experienced auto electrician.

In Russia, European pinouts are most often used. Before starting electrical installation work, the pinout of the 7-pin towbar socket must be carefully studied.

In this case, the driver does not interfere with the electrical circuit of the car. VAZ 2110 CONNECTING THE TRAILER SOCKET

Terminals that will connect to the wires. This option is possible if the tow bar and trailer have the appropriate connectors; universal.

Then the corresponding signals to the lighting equipment will come not from the lamp block blocks, but from the installed electronic device.

We have already written that connecting trailer light signaling to modern cars often becomes a serious problem.

If the vehicle has a complex electrical circuit, then you will have to spend a little more effort than in previous options.

Car trailers in the Omsk region - reliable and profitable! Connecting a trailer socket

A little about the company

Despite the fact that the project to create the plant was signed back in 1939, its construction was delayed until 1947. This was facilitated by martial law. But three years later, the first branded product was released - a caterpillar tractor. The production of special equipment lasted until 1962, after which the company directed its production forces to the development of an artillery model range and infantry fighting vehicles.

The year 1992 was marked by the production merger into OJSC Kurganmashzavod, as well as the establishment of export supplies. KMZ trailers and agricultural machinery appeared on the official website relatively recently. Now you can find the following products in the catalog:

• mounted buckets;
• rippers;
• spare parts for KMZ trailer;
• cleaning equipment;
• drilling equipment;
• concrete mixers;
• power units;
• KMZ car trailers;
• transport vehicles;
• mini tractors, etc.

The main production forces are concentrated in Chinese factories. Due to this, the company significantly reduced the cost of its own products. Thus, KMZ passenger trailers were able to seriously compete even with imported equipment.

Model range and prices

The modern market is overflowing with a variety of offers from various manufacturers, but the Kurgan trailer was distinguished not only by its availability, but also by positive reviews from customers. The best variations include the following models:

Trailer KMZ 8119

The tow hitch has a strong welded frame, which ensures durability and reliability of the device. The entire structure is reinforced to eliminate the possibility of deformation from overload. Thanks to the independent suspension, this model is characterized by increased stability and is not subject to rocking, which is so common in modern models.

8119 model 185 cm long, 160 cm wide, side height 30 cm. Trailer load capacity is 500 kg

The wheel hub does not protrude beyond the dimensions, so the device is easy to operate even in confined spaces. The design has a folding drawbar, this allows you to store the towbar in a vertical position. The upper part can be covered with an awning, which makes it possible to transport cargo in any weather.

The disadvantages of the model are that it has not been produced for a long time, so KMZ 8119 can only be found on the secondary market. Here its price varies within 20,000 rubles; the cost is directly influenced by the year of manufacture, condition and safety of the original configuration.

VIDEO: How to properly install the drawbar extension on 8119

Trailer KMZ 8136

The compact trailer KMZ 8136 is designed for transporting small-sized and light cargo weighing up to 390 kg.

Trailer KMZ 8136

The platform area of ​​the model is 2.23 m, and the dimensions are equal to the following indicators:

• length – 1850 mm;
• width – 1204 mm;
• height without covering with awning – 25 cm.

The curb weight of the KMZ does not exceed 160 kg, so the trailer is suitable for installation on any passenger car, even low-power ones. Its price is 30,000 rubles. The features of the model include a monolithic bottom made of aluminum, an extended drawbar with a mechanism for turning the body without the need to disconnect the trailer, galvanization, a traction type coupling system and folding sides.

VIDEO: Where is the serial number on the KMZ-8136 passenger trailer (for registration with the traffic police)

Trailer KMZ 8284

The model is used for transporting a variety of cargo, while it can be used in combination with any vehicle equipped with a towing device. The design has a spring shock-absorbing suspension, and the package includes an awning and a removable frame.

Trailer KMZ 8284

As an additional option for the KMZ 8284 trailer, there are 2-row or single-row sides with a height of up to 33.5 cm. The body of the trailer element is covered with galvanized steel, which, according to the manufacturer, eliminates the possibility of corrosion.

Sturdy 821303 zn

The cargo trailer makes it possible to transport cargo weighing up to 555 kg. The drawbar, frame and sides are made of galvanized material, this eliminates the possibility of corrosion even at the joints. A fairly roomy body will allow you to transport a wide variety of cargo, from large building materials to vegetables.

Trailer Krepysh 821303 ZN

A smooth ride will ensure a comfortable ride and preserve the original appearance of the fragile load. The towbar is equipped with a dumping system, which facilitates the unloading procedure. The bottom is made of laminated plywood with increased resistance to moisture. But this is also considered a disadvantage, since when overloaded, the bottom is easily deformed.

Brief technical specifications:

Price – 40,000 rub.

Communities › Trailers › Blog › Purchased a trailer - Kurgan KMZ-8136

Due to the necessary move from a dacha to another dacha, I started looking for a trailer. A new one, even the most budget one, flew for 30,000 rubles. On Avito it is also difficult to find a private seller with a normal price. As a result, based on the advertisement, when I arrived in Odintsovo, I purchased a trailer at a reasonable price. The trailer is 93 years old, my grandfather had it before me, then my grandfather died and bought it from my grandmother.

According to her, it stood in the garage and did not drive))) But due to the condition of the body, it was probably lying around at the dacha, and due to the wear and tear of the trailer, grandpa put hundreds of thousands of kilometers on it.

First of all, I changed the worn tires and crooked wheels. I took a winter kama, with the thorns flying out. I was surprised by the hub - it has 4-5 bolts with 1 adjustable hole. As I later found out - under classic Niva wheels.

The left hub bearing has some looseness and play, it seems like a nine-wheel bearing fits. We'll check it soon) At first the levers seemed Zaporozhye, but a closer look revealed the originality of the design. The shock absorbers are sporty red and the springs are of different heights. After re-registration I plan to service them.

As I wrote above, the original trailer was badly worn and was falling off the ball. At first I wanted to repair it, but it turned out that it was easier to buy a new one and make an adapter for it. I didn’t want to weld directly to the drawbar, since the original drawbar extension was included with the trailer.

How to avoid mistakes when connecting pinouts to 7 pins

If you need to install an additional trailer hitch socket, it must be mounted in the towbar socket.

In this situation, you can do the following: Install LED lamps in the trailer turn signals.

To connect to a car with an on-board computer, you need not only a 7 pin trailer plug, but also a matching unit - a device that is connected to the on-board circuit and is not perceived by the computer. As a rule, a special platform with a socket equipped with a contact connector is attached to its structure. Read other useful articles on this topic 2. Universal method of connecting the trailer connector and pinouts To connect in a universal way, using the towbar connector, alternately connect the wire of the left turn signal of the car with the left turn signal of the trailer, the rear fog light of the car and the fog light of the trailer, etc. As soon as it will determine that the current consumption exceeds the norm due to the connection with the trailer lighting equipment and an error message will be sent.

This method is called standard. Diagrams of various types of sockets On domestic cars, 7-pin electrical connectors are most often installed. If the connector on the vehicle does not match the standard, it is also recommended to seek professional help. Towbar socket To make the connection correctly, you need to supply turn signals, brake lights, as well as side and fog lights via one wire, and also connect license plate lighting there.

This must be done correctly - through the tow bar. It can be used to connect a car refrigerator located, for example, in a trailer.

If the trailer has an old type plug, you can connect it to the new Euro connector using a special adapter, which is much easier than changing the connector. List of required materials: Various tools for removing the bumper. We will not describe the operating principle of this device here, since this is the topic of a separate article. A special adapter is also installed on the electronic units.

The only difference is in the size and number of signal lights - naturally, more wires should be used for a cargo trailer. Before connecting, check the electronic circuits in the trailer connector for rotted wiring in the area of ​​soldering and contacts, and for short circuits in areas of rubbing elements. Brake light control. As already mentioned, this method is not suitable for vehicles equipped with an on-board computer. How to make the caravan electrics work

FakeHeader

Comments 37

Congratulations! I also bought this one yesterday, almost ideally for 15 rubles!

A similar one was reanimated, it is in the Logbook.

I have the same one! Like! Congratulations on your desired purchase!

A couple of years ago, the same one at the same price. I changed one lever, then for 3500 rubles. The wiring was changed and painted. The shock was supplied by a gas shock from Sharan. I don’t use it often, and I don’t load it like Kraz. He follows Sharan like a glove, whether loaded or empty. I was looking for just such a one with a drawbar extension and unloading, so that I could roll a boat.

I was looking for the main thing with the correct body shape, without arches into the trailer.

Nice trailer. I bought this used 10 years ago. After the purchase, I painted it all, put new hemispheres in the trailer (turned them by a turner) and changed the electrics. I have never lengthened the drawbar. But now he climbed under it and was upset - the khan’s levers. New ones cost as much as the floor of a new trailer. I'm thinking about what to do. The weak point is these levers...

Put it on springs! )))

A good option. I'll post it if I find it in St. Petersburg.

I own a similar trailer manufactured by Rubtsovsky MashZavod 93gv. It differs from yours only in the drawbar; mine is triangular. I'm surprised that all the steel components are the same.

Information about hub bearings www.drive2.ru/c/2945175/ It is better not to load more than 400 kg, otherwise the levers will bend. Shock absorbers are suitable for classic/niva/moskvich/zaza. Springs from Zaza/Tavria. Lanterns from the UAZ tadpole, license plate lights from the five/shnivy. Levers are original

It was necessary to immediately convert it to a beam, much more load-bearing!

And add another 15tr?

It was necessary to immediately convert it to a beam, much more load-bearing!

It was possible, but there is no need yet; I carry furniture and household appliances when moving.

When I started restoring my grandfather’s 93g trailer, I think I invested 12 thousand at once. There is still a replacement of hubs and axle shafts ahead. I think this is still worth 6-8 rubles. And for 15 in working condition to buy with documents, it’s not expensive at all. Considering the quality of trailers they sell now. Look at the reviews on the hosting sites, it’s all foil. The components are one disposable from China. Some have moisture-resistant plywood as the bottom of the trailer. Frank trash.

When I started restoring my grandfather’s 93g trailer, I think I invested 12 thousand at once. There is still a replacement of hubs and axle shafts ahead. I think this is still worth 6-8 rubles. And for 15 in working condition to buy with documents, it’s not expensive at all. Considering the quality of trailers they sell now. Look at the reviews on the hosting sites, it’s all foil. The components are one disposable from China. Some have moisture-resistant plywood as the bottom of the trailer. Frank trash.

The question on such a trailer is who the levers are from?

Who knows, there are levers made from pipes.

Is the hub axle removable there?

The hub has 4 bolts there.

What car are the wheel beams from?

Your own levers. Sold by the Kurgan plant as spare parts for approximately 4500 pieces.

The hole, yes, for a removable cylinder with a key, as mentioned above, is sold separately. And the price is of course a freebie, at one time I was looking for a remodel, but in our 600 km area there was nothing except rubbish with documents. In the end I took a new one

Trailer connector connection diagram (towbar socket pinout)

• home
• Articles
• Trailer connector connection diagram (towbar socket pinout)

15.08.2013

The article shows the standard electrical pinout. Those. If you installed the towbar in a specialized service, you can safely buy a new trailer for your car. If you installed the towbar yourself, then we hope this article will be useful to you.

If you need a trailer wiring diagram and towbar socket pinout, you can use the information below.

Please note that on MZSA trailers nothing is displayed at the 5th signal. Accordingly, if the side lights on your MZSA trailer do not light up, most likely the signal in the towbar socket is output only to the 5th contact, and not to the 7th.

Some Russian trailer manufacturers, when installing a reversing light, connect it to the 5th terminal, and leave the 7th contact behind the dimensions.

For long and trouble-free service of the electrical outlet, we recommend that after connecting the contacts, coat them with lithol or grease, and securely treat the place where the wiring harness enters the outlet with sealant.

The connection diagram for a 13-pin trailer socket is discussed in a separate article.

Tags: Maintenance of trailers, Towing hitch, Towbars, Electrical wiring and lighting equipment for trailers

With or without brake? How to secure an ATV?

Comments

green 10/25/2014, 08:30 SUPER!!!

2141 06.11.2014, 10:32 Well done, thank you very much. VVH (all the best to everyone).

DGin196 11/10/2014, 3:48 pm Thank you! I helped out, otherwise someone had cut the socket. I didn’t want to burn fuses at random.

Igor 12/27/2014, 2:12 pm Good afternoon! I have two modern trailers from different companies. On one trailer everything works, but on the MSA trailer the dimensions and license plate lights do not light up. I opened the socket on the towbar and indeed pin 5 is powered, but pin 7 is not. I reconnected the wire from 5 to 7. There is no way to check whether the fault has gone away because MZSA left with another car. But purely theoretically, the dimensions and license plate illumination will work if pin 7 is now powered, but the fifth is not?

Sergey (Buy a Trailer)

12/27/2014, 15:14 In theory, everything should be fine. Alternatively, you can connect pins 5 and 7 in the trailer plug with a separate wire - then the lights will definitely light up on all cars.

Igor 12/27/2014, 16:09 Thank you. If there is something, I'll try it.

Boris 03/01/2015, 22:33 car Pajer 4 trailer LAV 81012 on the trailer right turn lights up constantly with dimensions What needs to be done Need advice

Sergey (Buy a Trailer)

03/02/2015, 00:38 Most likely, the installation or replacement of a faulty electrical coordination unit (Smart-connect) is required. We recommend contacting a specialized service.

Boris 03/02/2015, 10:56 Thank you

Vitek 03/26/2015, 20:39 hello! Sergey, why is the ground indicated in your diagram with a white wire and not a black one?

Dmitry (Buy a Trailer)

03/27/2015, 11:45 Victor, we recommend that you ask this question to the MZSA plant.

Alexander 04/10/2015, 07:39 Good afternoon! I wanted to know how to connect the reverse gear on a sturdy trailer, namely which wire (+ or -) and where to pull it from. After all, in a car the reverse gear lights up through the ground, but in a trailer the ground is combined with the body (standard wiring and lights too).

Alexander (Buy a Trailer)

04/10/2015, 15:09 Good afternoon. You take the positive from the reverse wires, connect it to pin No. 5, and the negative from the trailer light goes to the body. We recommend that you contact specialists in the installation of towbars; independent work in car electricians using online consultations can be dangerous for your car.

Denis 04/16/2015, 16:06 Thank you, the plug came off, I connected it according to the diagram, everything works.

Dmitry (Buy a Trailer)

04/16/2015, 16:19 Denis, good afternoon. Glad to help.

Sergey 04/27/2015, 16:01 I have an MB VITO115, when the trailer is connected, the indicator lights on the car disappear. And on the trailer, the lights blink after 10 seconds.. They said that the relay unit needs to be installed separately. Is this true?

Novel (Buy Trailer)

04/27/2015, 16:35 Hello Sergey! Perhaps you need to install a smart connection.

vitaly 06/03/2015, 18:18 thank you

Alexey 06.16.2015, 22:12 Hello. Please tell me why the rear fog lights do not light up on the Passat B3? Could the cause be a faulty car socket? I read on the forums that the relay may be stuck in the socket, which turns off the car lights when the trailer is connected

Sergey (Buy a Trailer)

06/17/2015, 09:48 Alexey, hello. The fog light on your trailer or car doesn't work? If we are talking about a car, then check the fog lamp fuse and the light bulbs. If not them, then go to an electrician.

Joe 07/14/2015, 20:24 And in order not to redo it, you can close 7 and 5 at once??? nothing will burn???

Novel (Buy Trailer)

07/15/2015, 17:11 Hello! It is better to contact an electrician regarding this issue.

Maxim 08/04/2015, 15:18 Good afternoon, all the lights on the trailer have disappeared, can you tell me where to look for problems?

Dmitry (Buy a Trailer)

08/04/2015, 15:30 Maxim, good afternoon. Try checking the socket on the car, but it is better to entrust this issue to a professional electrician.

Oleg 09.27.2015, 22:47 Thank you. It helped a lot.

Alexei. 10/17/2015, 5:28 pm Hello! What could I have confused if everything works with the Priora, but on the Patriot when you press the brake, the side lights dim and all the turn signals come on? And this is how everything works...

Sergey (Buy a Trailer)

10/19/2015, 12:30 Alexey, hello. We recommend entrusting this issue to a professional electrician.

Victor 07.11.2015, 16:02 There is GOST 9200 - 76 Seven-pin detachable connections for cars and tractors. The contact numbers and wire colors are completely different.

Sergey (Buy a Trailer)

11/12/2015, 10:53 GOST 9200-76 is very controversial, and there are several color markings that contradict each other. The color coding used in MZSA electrical wiring practically coincides with the color coding of GOST 9200-76 on the 10th (11th) page. We can familiarize ourselves with GOST 9200-76 on specialized websites, for example on gostexpert.ru

Kirill 12/16/2015, 21:10 Hello. I went until recently and everything was OK. When turning around, I broke the socket, replaced it with a new one according to the same scheme, it gets warm when the trailer is connected, all the turn signals light up with a weak light, and when turning on the turn, everything starts to flicker

Sergey (Buy a Trailer)

16.12.2015, 22:56 Hello. You have a short circuit. In a socket, plug, next to them, or maybe in a completely different place - for example, in a flashlight. If you cannot find the short circuit yourself, contact a professional electrician.

LEONID 02/06/2016, 21:05 HELLO GUYS. TELL ME HOW TO SOLVE THE PROBLEM. BURNT SEVERAL FUSES. NERVES ARE FRAILED. ON THE F. PASSAT B3 I DECIDED TO REPLACE THE SOCKET FOR THE TRAILER. EVERYTHING WAS ROTTEN WHEN CONNECTED AND DID NOT WORK. I TOOK IT FROM THE CAR THERE TURNED OUT TO BE 8 WIRES AND THERE WAS A PLASTIC SOCKET. I DECIDED TO PUT A METAL ONE. TELL ME WHICH WIRE IS MASS. AND WHICH TO CONNECT AFTER AND WHERE.

Sergey (Buy a Trailer)

02/08/2016, 10:17 Hello. On a particular car, wires of any colors can be connected to any contacts. We recommend contacting a professional electrician.

Vladimir 03/02/2016, 15:54 Leonid, take a friend and check every wire. As for the 8 wires, you have two masses. One is straight from the dashboard, the second is the body.

Sergey 05/30/2016, 16:01 Hello. I installed the tow bar, the pinout is 7 pins, the wiring is 6 pins. But the trailer was left over from an old car, the pinout is 7 pins but the wiring is 4 pins. What should I do?

Sergey (Buy a Trailer)

05/30/2016, 16:42 Hello. What is 4 pin wiring? Which wire is missing and why? If the wiring is old-remade-homemade and one of the wires (turn signal?) was removed and thrown away, then it must be installed. Either by purchasing installation wire or by purchasing ready-made wiring harnesses.

Sergey 05/31/2016, 09:51 4 wires were connected to the plug on the trailer already from the manufacturer. The trailer (Bee) was attached to Kalina, currently Grant.

Sergey 05/31/2016, 10:13 Native diagram from the passport 1) Lev turn 4) right turn 6) stop 7) clearance. There is no mass at all, according to the scheme, you probably have to run along the ball

Alexey 07/26/2016, 09:26 how to connect a trailer to a car the dog chewed off the socket on the trailer the problem was that all the wires on the trailer were white

Sergey (Buy a Trailer)

08/01/2016, 12:12 Alexey, the fastest way to strip the wires is to take an old battery and find the negative one out of 5-7 wires first. Then go through all the positive wires and mark them (for example, leave stripes with a marker and write down the designations). Then, according to the diagram, screw the wires into the plug and check the functionality on the car.

Sergey 10.24.2016, 20:42 tell me why the cooker is rotten

Svetlana (Buy a Trailer)

10.25.2016, 08:36 Sergey, there are a great many options for electrical failure. You need to take a look, you can come to us. But first, make sure that the contacts are not oxidized and the light bulb does not come off.

Edward 11/29/2016, 1:56 pm ok

Nail 03/21/2017, 10:19 pm Good evening. Do you have wiring for the SAZ trailer?

Nikita (Buy a Trailer)

03/22/2017, 09:26 Hello Nail. Our accessories are designed only for MZSA brand trailers, including the wiring that we have in stock.

Alexander 04/22/2017, 23:07 A huge THANK YOU

Ramil 05/12/2017, 18:55 Is there the same scheme on the old “Pchelka” trailers?

Sergey (Buy a Trailer)

05/15/2017, 10:06 This is the standard. The older the trailer, the more likely it is that the trailer's wiring has been altered or altered in some other way. This means that if you connect the trailer to a car whose wiring is made according to the standard, the lights will not light up. It's up to you to put the wiring on the trailer in order, or to organize a collective farm in the car's socket.

Shamil 06/21/2017, 15:51 please tell me, after replacing the connector on the trailer, the contacts were smeared with Vaseline, when the lights and hazard lights are turned on, the turns and lights start blinking at the same time, does Vaseline have an effect, thank you

Svetlana (Buy a Trailer)

06/21/2017, 16:22 Shamil, it’s not entirely clear why you used Vaseline.

The main thing in this matter is not to confuse the contacts. To do this, read the connection diagram: https://kupi-pricep.ru/blog/rozetka

maksak 06/21/2017, 18:51 very helpful)) thank you very much)))

Oleg Borisovich Nazarenko 10/01/2017, 17:21 Good afternoon everyone - tell me there is a 7-pin socket on the towbar, I bought an MZSA trailer and the plug doesn’t fit, the same 7-pin outer diameter of the socket is 38mm and the inner socket is 35mm, I took the plug apart and connected everything works. I thought the sockets were all standard, but mine has some kind of rubber band that reduces the diameter - how to treat it? change the socket?

Svetlana (Buy a Trailer)

10/02/2017, 09:09 Oleg Borisovich, hello. A rubber seal in the socket is required. There is no need to dismantle it. The plug just needs to be inserted with force. While the new socket will not fit well, this problem will disappear over time.

Slava 11/25/2017, 07:08 pm feet, turn signals individually work well, but when all together, they start blinking randomly. What is this connected with?

Svetlana (Buy a Trailer)

11/27/2017, 3:44 pm Most likely there is an electrical problem with the tractor. It may be necessary to use a smart connection, but you do not have it installed. It's difficult to determine in absentia.

Sergey 11/30/2017, 07:34 pm Hello. I have had a Kurgan "Krepysh" for about 15 years, the wiring contacts have become unusable, and many of the wires turned out to be the same color. I found most of the connections, but due to oxidized contacts the connection is unstable and it is impossible to drive normally. I decided to change all the wiring, I couldn’t find the original one, they advised MZSA 817701, they said it was similar. I bought it and started to figure it out... At Krepysh, the ground is carried out everywhere in harnesses through the 3rd contact of the connector and is distributed to all lamps except the fog lamp: for the fog lamp it is taken from the trailer through a ball. But with the purchased harnesses the mass does not come out anywhere AT ALL, that is, it turns out that it must be taken from the trailer everywhere. The actual question is: why is there a white input “ground” wire in the purchased harness if it does not go out to the lamps anywhere and does it need to be connected to the plug? Or am I missing something?

Dmitry (Buy a Trailer)

12/01/2017, 11:14 Sergey, good afternoon. In MZSA trailers, the ground from the lights and the white ground wire of the wiring are connected to the trailer body. You need to connect one end of the wire to the housing, and the other to the trailer plug and connect the mass of lights to the housing.

Sergey 12/01/2017, 18:59 Good day. Thanks for the answer. I found one white outlet under the insulation for mounting “on the body” of the trailer. I still don’t understand why it is needed and why it should be output through the 3rd connector, if all the lamps are powered by ground through the trailer body, and the body already takes ground through the ball.

Dmitry (Buy a Trailer)

12/02/2017, 11:14 Sergey, the connection standard was created for ease of use of trailers. Some trailer models have locking devices with a stabilizer, where the ball is compressed by plastic clutches, or the trailer itself is made of materials that do not conduct electricity and such a solution is not convenient for manufacturers.

Ivan 01/12/2018, 12:38 When connecting, pay attention to the socket and plug, I found that the numbering of the pins of the socket plug did not match, since the plug and socket from different kits need to be looked at visually with the location of the contact pins and combined.

Dmitry (Buy a Trailer)

01/13/2018, 13:31 Ivan, good afternoon. Thanks for the information, we have not encountered a similar problem, but we will keep it in mind.

Ruslan 02/20/2018, 11:31 pm Hello. I have the same problem. The car is an Opel Astra 10 year old. I installed a towbar and electronics there at the service center (the towbar was sold separately for the electronics). I installed it or went home and hooked up the trailer and when I connected the electrical connector in the car (in the trunk) something started squeaking. When I press the brakes, it disappears. What could this be? Thank you

Dmitry (Buy a Trailer)

02/21/2018, 14:18 Ruslan, good afternoon. The most accurate way to determine the cause is to bring the trailer to the service center where you had the towbar installed; most likely they will be able to determine the problem and look at your car.

Ruslan 02.23.2018, 21:04 Thank you for your feedback. It turns out the turn signal light was not on.

IGOR 08/19/2018, 14:54 Will wiring work without ground?

Sergey (Buy a Trailer)

08/20/2018, 10:53 It depends on the wiring and what you mean by ground. A negative contact is connected to the socket - without it, nothing will burn. In trailer wiring, this negative contact in the vast majority of cases, to save wires, is connected to the trailer body - “ground”.

Anastasia 09.09.2018, 18:24 Good evening. We connected the trailer, the reverse light on the trailer is on, what could have been connected incorrectly?

Sergey (Buy a Trailer)

09/12/2018, 12:47 Good afternoon. What model and brand of trailer do you have? Is the problem that it stays on all the time? Together with the side lights or together with what kind of signal? If you turn off the side lights, do they stay off? Typically, trailers without a brake system do not have reverse gear. As far as I understand, we are talking about a used trailer and a homemade reverse gear.

Oleg 09.19.2018, 08:13 Good afternoon, how to connect the wiring if only 5 wires are output and there are 7 contacts, what should I connect where?

Dmitry 09/19/2018, 09:55 Please help me figure it out, I changed the socket to a metal one and connected it according to the diagram, but all the signals are not lit correctly

Dmitry (Buy a Trailer)

09.19.2018, 13:08 Oleg, good afternoon. Perhaps you have trailer dimensions on one wire, in this case you need to look at the connection diagram shown above. In any case, only an electrician can tell you for sure after calling all the wires.

Andrey 03/29/2019, 21:29 Tell me why everything doesn’t work at once, just one at a time

Andrey 03.29.2019, 21:31 You turn on the lights, the turn goes out, and so on

Sergey (Buy a Trailer)

03/30/2019, 10:03 Most likely the socket on the car is connected directly from the lights on the car, where smart or original electrics are needed.

Alexander 04/07/2019, 18:49 Hello. Help me please. Trailer BAZ 8142. I can’t connect the new 7-pin plug. There are 4 wires coming from the trailer: black, blue, white, red. Black is the thickest.

Sergey (Buy a Trailer)

04/08/2019, 11:29 Hello. We don’t know how the electrical wiring is arranged specifically on the BAZ 8142. Most likely, 4 wires are positive, but there is no minus - it needs to be installed additionally and secured to the trailer ground. Most likely, black is the marker, red is the stop, blue and white are the turn signals.

Alexander 05/28/2019, 12:38 Tell me everything is fine in the grid, I press the brakes and the brakes on the trailer light up, my trailer was hooked up to another car in it works and in my grid everything works, we can’t find the problem, thank you

Sergey (Buy a Trailer)

05/28/2019, 12:40 pm Sorry, I didn’t understand anything from what was written.

Alexander 05/28/2019, 12:40 Sorry, I made a mistake when I press the brakes on the trailer, both turns light up!

Dmitry (Buy a Trailer)

05/28/2019, 12:46 Alexander, good afternoon. Did your car come from America?

Alexander 05/28/2019, 12:58 Receiving MZ, I press the brake in the car and the turn signals on the trailer are on,

Alexander 05.28.2019, 13:08 There is no Toyota Verso from France, it is written in the title of Japan, but I bought the left-hand drive with a brake

Alexander 05/28/2019, 13:13 I connected my trailer to a friend’s car, everything works, I checked according to the trailer diagram everything is connected as it should be and there is ground on contact 3, and when we press the brakes, the turns light up,

Dmitry (Buy a Trailer)

05/28/2019, 13:44 Alexander, I apologize for the stupid question, but only one phase comes out of the car socket when you press the brake pedal?

Alexander 05.28.2019, 14:36 ​​Yes, I alone checked everything three times

Alexander 05.28.2019, 14:38 We are trying to clean the ground and all contacts

Dmitry (Buy a Trailer)

05/28/2019, 15:40 Alexander, is it possible that when the brake is pressed you have a phase on the trailer body? But this theory should be ruled out by the fact that everything works on the other car.

Maxim 06/23/2019, 13:46 I connected the trailer to the car, the dimensions work, the left turn signal works and when you turn on the right one, all the lights work, why?

Sergey (Buy a Trailer)

06/24/2019, 09:50 There are many options, you have to look. Perhaps broken wires in the car socket, broken wires in the car wiring, the right light is shorted, the smart device is faulty.

Konstantin 08/15/2019, 20:58 Hello. On the Astra, BC thinks that a trailer is connected and constantly tests it, like check the brake lights and turn signals. Although I never connected the trailer.

Konstantin (Buy a Trailer)

08/16/2019, 12:34 You need to connect a scanner or read the error number using the standard means of the car (for example, on Astra N). The connector connecting the towbar wires to the car's electrical system has probably oxidized; only diagnostics at a car service center can give an accurate answer.

Mikhail 09.17.2019, 20:50 Good evening. I connected the trailer, turn signals, dimensions, they work, I press the brake (automatic transmission), in the rear right part of the car the sound signal of old Ladas is emitted))) (Pajero 4 car), what is it???

Svetlana (Buy a Trailer)

09.19.2019, 10:49 Good afternoon. We are not general specialists; it is better to contact a specialized service.

Ravil 03/15/2020, 21:26 Thank you very much for the diagram. Helped a lot.

Venedikt 04/28/2020, 07:55 How to properly install a double-filament lamp on a trailer?

Konstantin (Buy a Trailer)

04/28/2020, 12:06 Venedikt, good afternoon. On MZSA trailers, double-filament lamps are used only in clearance/brake lamps. To replace the lamp you need to remove the lamp glass. Lightly press the lamp and rotate it around its axis until the tabs on the lamp fit into the grooves of the base, then remove the lamp. The new lamp is installed in the reverse order.

Alexander 04/28/2020, 14:37 I connected the trailer’s electrics via a smart connect, when the turn signal is turned on, it doesn’t matter whether it’s left or right, with the turn signal on the trailer the dimensions and license plate lights blink. Where is the mistake?

Dmitry (Buy a Trailer)

04/28/2020, 15:26 Alexander, good afternoon. Your smart connector may be faulty, the wires may be mixed up, or the wire braid may be damaged. We advise you to contact an electrician to fix the problem.

Vitaly 04.05.2020, 13:39 I disassembled the cutter on the car, I hang the control on the stop wire, I press the stop light, but everything on the trailer is on at the same time, I turn off the trailer, I check with the control, I hang it on the stop and when turning it lights up

Dmitry (Buy a Trailer)

05/04/2020, 14:28 Vitaly, good afternoon. I would advise you to start checking with the trailer plug, perhaps the wires are bridged.

Vitaly 05/05/2020, 1:53 pm Thank you very much, I found the cable on the car

Sergey 05/17/2020, 18:16 Hello, could you also tell me: a trailer made by the Saransk Dump Truck Plant, a Subaru Forester car, when I turn on the parking lights, the reverse lights on the car turn on. Without turning on the parking lights, everything works normally on the trailer, without comments.

Sergey (Buy a Trailer)

05/19/2020, 19:10 Hello. There are a lot of options for the problem. You need to check how the wiring of the towbar, smart, etc. is connected.

Alexey 07/03/2020, 22:20 Sergey, tell me - there may be a malfunction in the matching unit if when you connect a multimeter and on the “stop light” contact of the trailer socket - the battery voltage when you press the pedal, and when you connect a lamp (load) to the same contact the lamp does not light up and the voltage drops to zero. All other signals are present.

Sergey (Buy a Trailer)

07/06/2020, 11:34 Alexey, good afternoon. I'm not an electrician, but I think, yes, most likely the problem is in the smart.

Andrey 08.08.2020, 14:37 We connected everything according to the diagram, but for some reason the dimensions and the brake burn equally brightly. Trailer flint Machine Lifan x60

Dmitry (Buy a Trailer)

08.08.2020, 15:03 Andrey, good afternoon. Try disconnecting the marker wire from the plug and try turning on the brake light.

Andrey 08/08/2020, 15:24 It’s the brake that doesn’t light up.

Dmitry (Buy a Trailer)

08.08.2020, 15:46 Andrey, call the wire, there may be damage or the wire has come loose in the car socket.

Alexey 08/11/2020, 22:32 Good evening, please tell me the Love 81017 trailer, the socket has rotted from old age, when disassembling it turned out that there are much more wires than on the socket in color, it’s also not clear where you can find the 7 pin connection diagram

Sergey (Buy a Trailer)

08/12/2020, 11:47 Good afternoon. The diagram is published in the article you are commenting on. Bring it and we'll fix it.

Vladimir 08/19/2020, 06:47 I bought a car and installed a tow bar. A couple of years later I bought a trailer. Connected - everything works. A couple of years later I needed to haul someone else’s trailer. there were a lot of things that didn't work there. I gave it away and forgot about it. But then I accidentally discovered that the stops on my trailer didn’t work. Just then we had to take this alien trailer again. (By the way, during this time he repaired the electrics on his own) So the stop works on it, but only one. I found your diagram... There is only one wire to the stop. Even if we assume that one lamp burned out in someone else’s trailer, then there is only one wire! Why isn't my light on? Any ideas?

Konstantin (Buy a Trailer)

08/19/2020, 09:29 Vladimir, good afternoon. If both brake lights do not work, but the other one on the trailer works, the problem is usually in the trailer plug. You need to disassemble the plug, check and clean the contacts. Also check the serviceability of the brake light bulbs and their contacts. You can simply try to connect the trailer to another car, or check the electrics by applying voltage to the plug contacts. If everything is in order with the trailer, then perhaps you have a rare problem - bad towbar electrics, or connection errors - there is not enough voltage for two brake light lamps to light up, but enough for one. In this case, you need to look at the towbar electrician, or change the lamps (or better yet, assembled lamps) to LED ones.

Vladimir Vinikov 08/23/2020, 14:25 good afternoon. I broke the plug on the trailer and bought a new one and installed it. It turned out to be a mirror. When the headlights are turned on, all the lights come on. When I press stop, the stop lights go out, and the same goes for the turn signals. In general, everything works the other way around. What did I do wrong?

Konstantin (Buy a Trailer)

08.24.2020, 18:13 Vladimir, good afternoon. If everything was working fine before the plug broke and the wires were not damaged, then you may have connected the wires incorrectly, or your trailer may have a different color scheme.

Alexey 10/01/2020, 17:54 Hello, please tell me I have a bee trailer, how to connect the wires to the markings, 5 wires come out of the trailer, thanks in advance?

Konstantin (Buy a Trailer)

10/01/2020, 18:02 Alexey, good afternoon. Unfortunately, we do not know the wiring diagram for your trailer. If it does not correspond to the diagram in the article, and you cannot find a diagram on the Internet, the easiest way is to ring the wires.

Alexey 11/10/2020, 7:30 pm Good afternoon. Tell me, the trailer has a reversing light, how to connect it? 7-pin connector.

Konstantin (Buy a Trailer)

11.11.2020, 09:47 Alexey, good afternoon. 7 pin connectors do not have reverse gear. As it is written in the article, you can connect both side lights to pin 5, and switch the reverse gear to pin 7.

Andrey 11.21.2020, 19:34 Good evening, tell me, I connect the trailer to the Land Cruiser 200 until the car is started, everything works fine, as soon as you start it, the brake lights on the trailer are constantly on.

Sergey (Buy a Trailer)

23.11.2020, 16:20 Good evening. There can be many options. Please contact a specialized service for diagnostics.

Alexey 11.24.2020, 15:21 Good afternoon! I bought the KP-35A wiring from you and installed it, everything is great! Question. It is designed for a 7-pin socket, but there is one extra pink wire. I looked at the diagrams, he is moving backwards. I have a BMW X1 with an original tow bar and a 13-pin socket, of course. Is it possible to pin the new wiring into a 13-pin plug? it has the required number of wires, the only thing is that they differ in color from the standard 13-pin wiring?!

Dmitry (Buy a Trailer)

24.11.2020, 16:03 Alexey, good afternoon. A 13-pin plug can be connected to this wire. The connection diagram is also on our website.

Alexey 11/24/2020, 07:09 pm Thank you very much!!!

Igor 01.28.2021, 16:26 Good afternoon, on the Ikorets trailer the lights and reverse do not light up, the stop and turn signals work, I went to the installer, it connects to the outlet, everything works, tell me where to look for the problem?

Kontantin (Buy a Trailer)

01/28/2021, 17:04 Igor, good afternoon. If everything is connected correctly in the car socket, then the problem is in the trailer, you need to ring the trailer plug and look for the wire that is responsible for the dimensions. If the socket is 7-pin, then it does not provide reverse gear.

Igor 01.28.2021, 17:15 Yes, the main thing for me is the dimensions) So we’ll look at the entire train and call!) Thank you very much!!!

Sergey 04/27/2021, 13:14 Good afternoon. The brake light on the trailer does not light up. It worked fine though. Dimensions and turn signals work as expected. What could be the reason??? Ford Kuga 2022. The matching block is worth

Sergey (Buy a Trailer)

04/27/2021, 13:17 Good afternoon. There are many options: the wire in the plug has come loose, the wire in the socket has come loose, the light bulbs have burned out, the wiring on the trailer is damaged, the matching unit is faulty.

Sergey 04/27/2021, 13:25 We looked at all the wires and rang. Everything is in place. The lamps are intact. When you press the brake, the warning light dimly lights up for a couple of seconds.

Sergey 04/27/2021, 13:45 Voltage 14 Current strength 0.2

Sergey (Buy a Trailer)

04/27/2021, 14:44 Then the options remain: the wire in the car socket has come loose/oxidized or the matching unit is faulty.

Sergey 04/27/2021, 17:37 Thank you

Ivan 05/04/2021, 19:02 Hello. When you connect the trailer socket and turn on the lights on the car, for some reason the sound of the car reverse starts to play. There is no reverse light on the trailer. Kalina car. Tell me what could be the problem. Thank you

Konstantin (Buy a Trailer)

05/05/2021, 11:03 Ivan, good afternoon. Most likely, the tow bar has pin 5 in reverse, and the side lights on the trailer are parallelized. Try putting the car in reverse and ringing the car's socket.

Alexey 05/06/2021, 06:30 Super! Very helpful. Only for some reason 7 rings on my body, but 3 doesn’t ring on the side of the 1998 Toyota Land Cruiser 90.. 73! Good luck!

Igor 05/19/2021, 22:41 Hello! I connected the socket on the car according to the diagram and everything worked on the trailer, but as soon as I turn on the headlights, any turn signal starts blinking, everything possible at half-glow. Without dimensions it works as it should. Stops, turns. And the dimensions until you turn on the turn signal. What could this be? Thank you.

Konstantin (Buy a Trailer)

05/20/2021, 10:45 Igor, good afternoon. Apparently the problem is the increased load, while turning on the side lights and turn signals. Check the weight and power supply of the dimensions.

Nikolay 06/05/2021, 15:02 Good afternoon, please tell me, I bought a MMZ 81021 trailer, the plug on the trailer has 4 wires; when connected, everything works except for the right turn. What to do?

Dmitry (Buy a Trailer)

06/05/2021, 15:07 Nikolay, good afternoon. The trailer plug should be a standard 7-pin plug. If you have a broken wiring, the easiest option is to change it.

Nikolai 06/05/2021, 15:33 Dmitry, the plug is standard, but only 4 wires fit. There is no break in the wire, I looked through all the wiring.

Dmitry (Buy a Trailer)

06/05/2021, 15:50 Nikolay, we can offer you to install new wiring, the wiring can be viewed at this link: https://kupi-pricep.ru/products/elektroprovodka-pritsepa

Nikolay 06/05/2021, 15:55 Thank you very much for the advice, I will definitely use it.

Vadim 07/10/2021, 15:10 please tell me which wire is responsible for the feet on the sturdy one

Dmitry (Buy a Trailer)

07/10/2021, 15:14 Vadim, good afternoon. We only sell MZSA trailers and, unfortunately, we don’t know.

Rinat 07.27.2021, 10:14 Tell me, the Omsk trailer is an old model. The arches are inside, separately everything works fine. And when the emergency lights are turned on, the brake lights blink instead of the turn signals... Ground via a separate wire from the trailer body.

Sergey (Buy a Trailer)

07.27.2021, 15:20 Rinat, there is nothing to suggest remotely, you need to watch.

Sergey 09.16.2021, 18:51 Good afternoon. The connector on the Volse B7 is 13, but the contacts there are 9. I connect the trailer to 7 pins. Only right turn works. What's the matter?

Konstantin (Buy a Trailer)

09/17/2021, 09:39 Sergey, good afternoon. The reason may be in the car, or in the trailer, or in the adapter. First of all, you need to check the car socket and trailer plug, according to the diagrams in the article above. At the bottom of the article there is a link to a diagram of a 13-pin socket.

Sergey 09.17.2021, 21:28 I found the right turn on the car's rosette, but not the left one. There are two contacts that simply show constant voltage. I didn't look at how many. But blinking when turning the car on different things is nothing.

Konstantin (Buy a Trailer)

09.18.2021, 10:02 Left turn signal, this is pin number 1 on the diagram, check its connection. If you cannot fix the problem yourself, we advise you to contact the service.

Arthur 10/16/2021, 07:07 pm Someone tell me! I bought a trailer for Vesta, everything works except the turn signals! The electrician said the relay is not pulling! What to do?

Sergey (Buy a Trailer)

10.18.2021, 10:57 Good afternoon. There are three options for connecting a trailer socket in a car:

1. Using standard wiring supplied by the vehicle manufacturer. There can be no problem here.
2. Cheaper option. Using the smart connect matching block. The problems mentioned above cannot exist here either.
3. The cheapest option, which is not applicable on some cars. Crash into the rear light wiring.

As far as I understand, you have the third option, and the car turns off the turn signals when you try to turn them on. You should try replacing regular bulbs in the turn signals with diode ones (they have less resistance). If it doesn't help, install smart connect.

Alexey 10.21.2021, 14:30 The following question has arisen. The entire socket was destroyed. For 7 contacts. I took it apart, and inside there is a wire with 13 contacts. Three white ones go to the body (ground), 8 are embedded in the existing wiring (two for the fog light, the socket was with a fog light break button) and two go under the trim. How to reconnect a new outlet? View the previous connection did not provide an axis possible, because. everything disappeared inside the socket. Thanks for the help.

Sergey (Buy a Trailer)

10.21.2021, 15:40 Your question is not completely clear. What exactly is causing the difficulty? If the colors of the wiring differ from the standard, and it is not clear from the colors of the wires which contact is which, connect at random. The fact that you found a minus is already half the battle. Assemble the plug, connect it to the car and see what lights up instead of what should light up. If we are talking about a camper, then there is a 13-pin socket: Did you manage to figure it out?

Alexey 10.21.2021, 15:45 I apologize for the previous comment. The socket was still 13 pin. Sorry again.

Peter 11.28.2021, 09:05 Good afternoon, what should I do if contact 5 is not connected? And the dimensions on the trailer don't work?

Sergey (Buy a Trailer)

28.11.2021, 20:55 Good afternoon. On the car, the left marker should be output to the 7th pin, and the right marker to the 5th pin. If you have only the 5th on your car, and only the 7th on your trailer, then either swap these two wires or connect them with a wire - in Russia there is no rule to turn on the left side lights, as in some countries. This can be done both in the trailer plug and in the car socket.

Vitya 01/05/2022, 10:12 And where is the negative wire in the rear hub?

Yum 01/05/2022, 1:31 pm Why don’t your dimensions work?

Sergey (Buy a Trailer)

01/12/2022, 23:01 um, everything works for us. If the article didn’t help, come and we’ll make it work for you too.

Sergey (Buy a Trailer)

01/12/2022, 11:02 pm Vitya, it’s not clear what you mean by rear hub.
Write a comment
Back to top

Trailers from Kurganmashzavod

All products of the Kurgan Machine-Building Plant are distinguished by functionality, reliability, efficiency, and ease of use. Over the years of existence, trailers from the KMZ plant have earned fans throughout Russia, who confidently confirmed the suitability of these units. An obvious example is, for example, the universal trailer KMZ 828420, popular in all corners of the country.

Trailers for KMZ passenger cars have a number of distinctive features and features that set them apart from their competitive counterparts. A clear advantage is the fully galvanized sides and painted frame. And the moisture-resistant plywood bottom, which suppresses the noise emitted by the cargo, will last a very long time. But provided that no aggressive mechanical influences are exerted on it.

The manufacturer and developer Kurganmashzavod has provided for literally every nuance of the design: high-quality wheel bearings, a durable suspension arm, shock absorbers that can withstand heavy loads and other spare parts. And when replacing components, the owners of the structure do not have problems with which they have to contact specialists.

Characteristics of KMZ trailers

Multifunctional trailers for KMZ passenger cars, as a rule, have body dimensions of 2-3.5 m in length, 1.25-1.51 m in width, side height - 0.35 m. Dimensions of station wagons vary from 3.23 to 4 .89 m in length, 1.59-2.05 in width, 0.9-0.96 in height. Their curb weight is 0.16-0.355 tons, the gross weight is 0.75 tons, and the payload is 0.395-0.59 tons. The loading height of such trailers is 0.55-0.666 m. Almost all general-purpose trailers are equipped with quick-release sides. They are modified into a carriage platform. There are both single-axis and biaxial. The cost of multifunctional on-board aircraft ranges from 34 to 72 thousand rubles.

As for trailers for motor and snowmobile equipment, these are the same universal flatbeds with the same characteristics and within the same price limits, only equipped with additional equipment for securing, loading and unloading, and transporting equipment.

Frame carriages for boats and boats with dimensions of about 4 meters in length, 1.5 meters in width and up to 1 meter in height. They have a carrying capacity of more than 0.5 tons and a loading height of 0.65 m. The cost for them starts from 43,500 rubles.

Models are equipped with thirteen or sixteen inch wheels and four-leaf spring suspension.

Popular trailer models

1. The KMZ 8284 20 trailer is a bright representative among station wagons. Compatible with all passenger cars that have a tow bar. The dependent suspension with shock absorbers creates a smooth ride. Single-row sides with a height of 33.5 cm (removable at the front, rear), double-row - 25 cm. Equipped with a tipper mechanism. The additional package includes a removable arch tent frame. The length of the transported cargo is up to 5.5 m. It is stored in a vertical or horizontal position, saving space. Standing takes up to 1 square meter. Regarding technical characteristics:
   Curb weight – 0.18 t.
2. Payload – 0.57 t.
3. Body dimensions – 1.85x1.204x0.25 m.
4. Overall – 3.085x1.76x0.6 m.
5. Loading height – 0.6 m.
6. Wheels – 13.

And these are just a few samples presented by the plant, among the assortment of which anyone can choose the one that suits them. Whether to buy one of the presented models or not is a personal choice. Fortunately, today the range of trailed equipment for passenger cars is extensive, although this may seem like a problem.

general description

This type of vehicle is produced by the Kurgan Trailers Trade House. All of the company's products are easy to use and highly reliable. And most importantly, low cost, affordable for many drivers.

Over many years of operation, the KMZ trailer has gained a huge number of fans. They, the users, like no one else, can confirm the quality of the vehicle, its versatility and suitability for Russian roads.

The company offers a large selection of models. From universal to specialized. It is difficult to describe them all in one place. Therefore, we will consider only a few options.

Universal trailers

The KMZ general purpose trailer is one of the first produced at the plant. It is used for various purposes in everyday life. It can transport personal belongings, construction materials and other types of cargo. The trailer is equipped with sides, the height of which can vary. There are models with increased height.

A representative of this group is the KMZ-8284 trailer. It can be used with all passenger cars that have a coupling device. For a soft and smooth ride, both springs and shock absorbers are installed. The sides can be single-row (with a height of 33.5 centimeters) or double-row (the height of each row is 25 centimeters). In addition, there is additionally a removable frame (in the form of arcs) with an awning. The front and rear sides are removable. This facilitates the loading process and allows you to transport loads up to five and a half meters in length.

The trailer can even be stored in an upright position. This saves space. In this position it occupies less than one square meter.

The technical characteristics of the KMZ-8284 trailer include the following:

• The curb weight of the trailer is eighteen kilograms.

• The permissible cargo weight is three hundred and seventy kilograms.

• The length of the trailer is 3.1 meters, with the drawbar extension installed – 3.9 meters.

• Width – 1.8 meters.

• Height with an awning – 1.1-1.3 meters (depending on modification), with a rigid superstructure – 1.6-1.7 meters.

• The dimensions of the interior of the trailer are 1.9x1.2x0.5 meters.

• The permissible speed is ninety kilometers per hour.

Another bright representative of this category is the KMZ-8136 trailer. Its dimensions are as follows: length – 1.9 meters, width – 1.2 meters, height – 0.3 meters. The platform area with these dimensions is 2.23 square meters. It is capable of transporting cargo weighing no more than 390 kilograms. The weight of the trailer itself is one hundred and sixty kilograms.

The cost of trailers in this group ranges from thirty-three to thirty-five thousand rubles.

Strong trailer - 8213 03 and strong SV modification for a passenger car buy in the city

2 rows of sides, internal dimensions of the body, height to the awning 0.75 m, black awning 60 cm high, support wheel (not automatic), R 13′ wheel, V-shaped drawbar, drawbar extension, spring suspension - 47,000 rubles. The overall dimensions and weight of the trailer are indicated for the basic configuration of the trailer: 13″ wheel, 2 rows of sides, low awning. Since 2020, a beam with a welded axle has been installed on the trailer.

In 2022, the “Krepysh SV” modification was developed (more on this later).

The recommended retail price of "Krepysh" is indicated without taking into account delivery to the regions. Check prices with dealers.

SPECIAL FEATURES OF THE “STRENGTH” TRAILER:

Transportation of long loads up to 5.5 meters. With the help of the drawbar extension, which comes as standard with the trailer, you can transport long loads.

Increasing the height of the trailer body. Installing an additional row of sides on the Krepysh trailer allows you to increase the body by 25 centimeters.

A strong, reliable and convenient trailer for a passenger car will help you transport various cargoes. Reinforced galvanized metal sides and a V-shaped drawbar ensure high strength and durability of the trailer. Spring-shock absorber (with springs) suspension with progressive characteristics allows you to achieve a high smoothness and stability on the road. The trailer can be equipped with additional rows of extension sides, an awning of different heights and a drawbar extension - the listed equipment can significantly increase the capabilities of your cargo trailer. For the correct position of the Kurgan trailer “Krepysh” when operating with off-road vehicles, reinforced hubs and wheels of larger diameter (R15, R16) are installed on the trailer. The trailer is equipped with a tipper system that facilitates unloading of bulk cargo.

MODIFICATION OF THE TRAILER - “KREPISH SV”.

In July 2022, a special edition of this trailer was developed, called “Krepysh SV”. It differs from the usual “Strong” in that its frame, drawbar and side posts have an additional protective layer of coating. Details in the video:

Models for transporting boats

The KMZ trailer can be used for transporting boats, motorcycles, snowmobiles, and so on. Such models are distinguished by a modified frame design, increased dimensions and load capacity.

For example, the Vodnik trailer, or KMZ-8213-03, can be used for transporting boats and jet skis. His weight is one hundred and sixty kilograms. At the same time, it is capable of transporting loads weighing five hundred and ninety kilograms. It has a spring-type suspension. Its dimensions are 3.1x1.7x0.8 meters. With such dimensions, it transports loads up to 4.2 meters long.

Transportation of snowmobiles and ATVs

Specialized models also include trailers that are used to transport ATVs and snowmobiles.

Trailer KMZ-8213-A7, or “Taiga-2”. used for transporting snowmobiles. It has increased dimensions and weight. Its weight is 280 kilograms. Length – 3.4 meters, width – 1.4 meters, and height – 0.4 meters. Its carrying capacity is 470 kilograms. The design is made in the form of sides on which a frame with an awning is attached. The suspension, like the previous model, is spring.

Another type of trailer has the interesting name “Tandem”. This is a KMZ-8213-E7 trailer. It is suitable for transporting two vehicles at once. These could be snowmobiles or ATVs. Its design is presented in the form of an open platform. Body size – 3.6x2.0x.01 meters. And the dimensions of the entire trailer are 5.3x2.1x1.3 meters. The curb weight of the model is three hundred and fifty kilograms. It is capable of transporting loads weighing four hundred kilograms. The suspension is more durable, spring type.

This is only a small number of models presented by the company. Among the assortment, everyone will be able to choose the right option for themselves.

Trailers KMZ 8284

Internal body dimensions: 1850 x 1204 x 250 mm.

Load capacity: 570 kg.

Internal body dimensions: 1850 x 1204 x 250 mm.

Load capacity: 570 kg.

Internal body dimensions: 1850 x 1204 x 250 mm.

Load capacity: 570 kg.

Internal body dimensions: 1850 x 1204 x 250 mm.

Load capacity: 570 kg.

Internal body dimensions: 1850 x 1204 x 335 mm.

Load capacity: 570 kg.

Internal body dimensions: 1850 x 1204 x 335 mm.

Load capacity: 570 kg.

Internal body dimensions: 1850 x 1204 x 335 mm.

Load capacity: 570 kg.

Internal body dimensions: 1850 x 1204 x 335 mm.

Load capacity: 570 kg.

Internal dimensions of the body: – mm.

Load capacity: 560 kg.

Internal body dimensions: 2400 x 1400 x 290 mm.

Load capacity: 520 kg.

Internal body dimensions: 3270 x 1400 x 290 mm.

Load capacity: 480 kg.

* The recommended retail price for the basic configuration of the trailer is indicated. The basic package of a trailer from the new KMZ line includes: – a passenger trailer with a wheel size of 13″; – bracket for adjusting the height of the coupling device (except for the “Kurganets”, “Classics-M”, “Master-M” models).

Answers to 3 frequently asked questions about connecting a towbar socket

If there is such a connection, all connected parts will work smoothly and will not create problems for the motorist. Then do the same as in the first method - connect the wires of the rear lighting of the car and the towbar sockets, while not forgetting the need for reliable insulation.

It is strongly recommended not to do this at random, connecting the connector contacts of the caravan in series with the indicator lamp - in the presence of digital circuits for controlling lighting devices, this method is unsafe.

If you were unable to print, then download the diagrams to your smartphone to constantly check the correct connection. Call and buy trailers here in Omsk at the address: pr. Diagrams of various types of sockets On domestically produced cars, 7-pin electrical connectors are most often installed. It is advisable to check the compliance of the found circuit; this can be done using a multimeter.

Accordingly, a seven-pin socket must be connected to a seven-pin plug.

The seven-pin connector is most often not used on modern foreign cars. Inertial overrun brake for a passenger trailer. Scheme and principle of operation

KMZ light trailers – catalog of trailers from the manufacturer

Trailers for passenger cars of the KMZ brand have been on the market since 1984. Over this long time, the design of trailers has undergone several modifications. In 2022, production of a line of new KMZ light trailers began at a new production site in Cheboksary.

The field of trailers for passenger cars is actively developing, which has made it possible to collect the best from the models on the market and implement them in reliable, easy-to-use passenger trailers.

The trailers of the new line have a number of differences from previous generations:

• Welded frame structure is hot-dip galvanized
• One-piece imported wiring
• Reliable hinges of folding quick-release sides
• Sides made of galvanized steel 1.2 mm thick
• Ergonomic and secure latches for tipper function and tailgates
• In the basic configuration - a bracket for adjusting the height of the hitch
• All trailers can be modified into a platform

The KMZ passenger trailer catalog consists of eight models:

“Kurganets”

: single-axle passenger trailer with a straight drawbar for transporting small-sized cargo, building materials, and various household goods. The compact size of the trailer makes it convenient for city or country use.

"Classic"

: single-axle passenger trailer with a V-shaped drawbar for transporting medium-sized cargo, construction materials, and various household goods. This trailer model has the function of installing an additional row of sides.

“Classics-M”

: single-axle passenger trailer with a V-shaped drawbar for transporting various household goods and building materials. Budget version of the “Classic” model. This model also has the function of installing an additional row of sides.

"Master"

: single-axle passenger trailer with a V-shaped drawbar for transporting medium-sized cargo, construction materials, and various household goods. The trailer is adapted for transporting standard sheets of drywall, plywood, and metal.

“Master-M”

: a single-axle passenger trailer with a V-shaped drawbar, has a spacious body of 2.5x1.26 m, convenient for transporting standard sheets of plywood, drywall and other building materials, and is also one of the most advantageous offers among trailers with similar dimensions.

“Quadro”

: single-axle passenger trailer with a V-shaped drawbar for transporting large cargo and motor vehicles. The dimensions of the trailer body allow you to transport an ATV of any model.

"Optima"

: single-axle passenger trailer with a V-shaped drawbar for transporting large cargo and motor vehicles. The increased length of the body allows you to transport long loads.

“Profi”

: single-axle passenger trailer with a V-shaped drawbar for transporting large cargo, motor vehicles and small snowmobiles. The frame is reinforced, which makes the structure more reliable.

"North"

: single-axle passenger trailer with a V-shaped drawbar for transporting large cargo, motorcycles and snowmobiles.

"Business"

: 2-axle passenger trailer with V-drawbar for commercial use. The trailer has increased stability due to the presence of two axles.

We invite Partners to cooperate. More detailed information is on the Become a dealer page.

Design features of KMZ 8136

If you look at the official passport of this automobile passenger trailer, you can find out quite a lot of interesting and useful information regarding the original design of the KMZ 8136. To begin with, I will note that this is a trailer for passenger cars, aimed at transporting various cargoes. I hasten to remind you about the features and advantages that you can read at the link.

The plant provides for the installation of a whole list of components and parts, including shock absorbers, bearings and silent blocks, identical to those used on domestic cars. So, you can put a set of wheels from a VAZ or Moskvich on a trailer. An exception is the Moskvich M 2141 model.

The suspension here is of very high quality and durable. It is an independent design with coil compression springs and telescopic hydraulic shock absorbers. Stamp-welded arms are also used, which swing in the longitudinal plane and are hinged using silent blocks on the transverse beam of the trailer frame.

Now you can easily select and install it, making almost anything you want from domestic classics.

The KMZ 8136 was supplied with the following items from the factory:

• awning;
• set of extension sides;
• drawbar extension;
• fasteners;
• electrical kit for connecting lighting devices, etc. to the vehicle’s on-board network.

The equipment was quite rich. Some components were offered at extra cost, while others were included in the base price. But the price remained at an affordable and adequate level, which largely explains such popularity.

I agree that in some modern KMZ 8136, which have undergone alterations and modifications, even from a photo it is difficult to recognize the outlines of a classic domestic trailer. But nothing lasts forever, so the design needs to be improved and modernized. Even if initially KMZ 8136 has excellent quality.

Specifications

Reading reviews, I discovered that many cannot find the frame number on their trailer from KMZ. I hasten to help. Usually this number is located in the area of ​​the left side lamp. Look in that area.

It often happens that during use the number becomes dirty, rubbed over or covered with new layers of paint. This is an obvious flaw on the part of the manufacturer, since on models 8136 before 2000 the number was not duplicated. It is located only in one place and is sometimes poorly visible due to the initially not very high-quality application.

If you have figured this out, then all that remains is to consider the main technical characteristics. Understanding the approximate dimensions and capabilities of the trailer, you can decide for yourself whether you need a similar option, or whether it is better to look among something more modern.

I will build on the passport data, considering the technical aspects of KMZ 8136. Let's begin.

I suggest you draw your own conclusions. In general, this is a worthy passenger trailer, given its rich history and long presence on the market.

Whether to buy such a model or not is a personal choice for everyone. Today, the range of passenger car trailers is so huge that purchasing becomes a serious problem. If earlier it was the shortage that caused difficulties, today the main problem is the wide choice. Thank you all for your attention! Be sure to leave comments, ask questions, subscribe and invite your friends!

Designed for the transportation of goods, belongs to category “B”, for passenger cars.

The car trailer model KMZ 8284, having retained all the advantages of its predecessor KMZ-8136, differs from the previous model in a more modernized version, which significantly increases its technical and operational characteristics.

The trailer's carrying capacity has increased to 570 kg, while the loading height of the platform has decreased to 580 mm, making loading and unloading operations more convenient. The trailer is equipped with a reinforced spring-shock-absorbing suspension. The imported coupling head is the best in its class. Modern lighting technology, as well as the license plate number, are located in a semi-closed beam, providing reliable protection. The installed plastic wings are frost-resistant and are ideal for Russian climatic conditions. Separate mention should be made of the advantages of the body. The trailer body not only has greater spaciousness and load capacity, but is very convenient to use and maintain, and is also more functional; it has the ability to tip over, acting as a dump truck. The front and rear sides open, allowing you to easily transport oversized cargo and long items, and are equipped with semi-automatic locks. The sides are made of durable corrugated galvanized steel, which significantly extends their service life and allows them to maintain their excellent appearance for a long time. The bottom is made of modern laminated plywood. The protective awning is made of particularly durable wear-resistant material. The main components of the KMZ trailer are manufactured by the world's leading concerns AL-KO Kober and Fristom. There are 2 versions: with painted or galvanized sides.

An improved series of general purpose trailers with an increased side height of 335 mm, characterized by a reinforced V-shaped drawbar, which adds rigidity to the structure and increases the directional stability of the trailer.

The advantages of the trailer include:

• the ability to install a drawbar extension, allowing the transportation of long loads up to 5 m.
• possibility of installing a support wheel to facilitate independent movement of the trailer
• body tipping function
• front and rear sides are quick-release, easy to open using imported locks
• The sides are painted over galvanization, which significantly increases their service life
• The trailer is available in five colors: black, blue, red, eggplant, dark gray

— the trailer body tips over (dump truck function)

— front and rear sides open

- durable corrugated sides

— imported lighting equipment in a semi-closed beam

Price for trailer KMZ 8284 21 V painted

The KMZ brand occupies one of the leading positions among manufacturers of trailer equipment for passenger cars in Russia. The first KMZ trailer for a passenger car was produced back in 1984. Trailed equipment from Kurganmashzavod, thanks to its high quality and affordable price, quickly gained its significant place in the market.