Subcompact car Hyundai Getz produced in 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 and 2011. During this time, the model was restyled, although some call it the second generation. In this publication you will find a description of fuses and relays of the Hyundai Getz with block diagrams and their locations. Note the fuse responsible for the cigarette lighter.
The design of the blocks and the purpose of the elements in them may differ and depend on the type of engine and level of equipment of your Hyundai Getz. Check the description with the diagrams on the back of the protective cover.
Engine compartment
The fuse box is located in the engine compartment on the left.
Inside the fuse/relay panel covers you can find a label with the name and capacity of the fuse/relay. Not all fuse panel descriptions in this manual may apply to your vehicle. This is correct at the time of printing. When inspecting the fuse box on your vehicle, refer to the fuse box label.
History of Hyundai Getz
In the photo there is a Hyundai Getz 2002-2005. The Hyundai Getz is owned by a South Korean car company that introduced the subcompact car to the world in early 2002 and has since gone into full production and sale around the world. In some countries there is another name for it, for example:
- Hyundai Click - North Korea;
- Dodge Brisa - Venezuela (northern South America);
- Inokom Getz - Malaysia
- Hyundai TB - Japan
- Hyundai Getz Prime - India
In 2005, the car underwent significant restyling, and the 1.3 liter engine was replaced by a 1.4 liter, resulting in the Hyundai Getz II. Not only the body (front and rear lights, bumper, radiator grille, exhaust system, engine subframe) was changed, but also the interior (steering wheel, design of the dashboard and center console, electrical component). If the second generation of Getz (if you can call it that) pleased with its slightly changed appearance (plus they added a new color scheme for the interior trim and rear disc brakes), then the basic equipment and the quality of the materials from which the interior was made were not. Hyundai Getz 2 has acquired cheaper and poor quality plastic seat upholstery.
Fuse Box Diagrams
Dashboard
Left-handed type
Right hand drive type
Assignment of fuses in the instrument panel
| DESCRIPTION | AMP RATING | SECURED COMPONENTS |
| POWER CONNECTION AND R/LP | 15A | Lamp, Audio, Cluster |
| H/LP LH | 15A | High beam indicator, headlight (left) |
| F/FOG | 10A | Front fog lamp |
| H/LP RH | 15A | Headlight (right) |
| PR/HTD | 30A | Heated rear window |
| BLOWER | 10A | Fan, Luke |
| IGNITION | 10A | Fog Light, ETACM, Power Window, Headlight Leveling Device |
| R/FOG | 10A | Rear fog light |
| FRTWPR | 20A | Front wiper motor |
| DANGER | 15A | Warning light, ETACM |
| STOP | 15A | Brake light, power window |
| ECU2 | 15A | ECM |
| HTDMIR | 10A | Heated rear window |
| S/HTD | 20A | Heated seat |
| DRL | 10A | Daytime running light |
| START | 10A | Start relay, Security alarm system |
| RR/WPR | 15A | Rear wiper motor |
| D/LOCK | 20A | Door lock system, sunroof |
| BAG | 10A | Air bag |
| ECU1 | 10A | PCM, ABS control |
| P/EXIT | 15A | Socket |
| CLUSTER | 10A | Cluster |
| TAIL RIGHT | 10A | STOP/Taillight (Right) |
| T/S.I.G. | 10A | Turn signal, tail light |
| AUDIO | 15A | Audio, electronic outside mirror |
| A/BAG IND | 10A | A/Bag, Indicator |
| TAIL LEFT | 10A | Stop/Tail Light (Left) |
| A/C SW | 10A | Air conditioner |
Engine compartment (Gasoline)
Assignment of fuses in the engine compartment (Gasoline)
| DESCRIPTION | AMP RATING | SECURED COMPONENTS |
| IGN 2 | 30A | Egnition lock |
| IGN 1 | 30A | Ignition switch, start relay |
| ECU | 30A | Fuel pump, generator, ECM |
| GLAD | 30A | Radiator fan |
| BATT | 50A | Headlight, heater relay |
| ABS | 10A | ABS |
| C/Lighter | 25A | C/lighter |
| F/PUMP | 15A | Automatic fuel cut-off switch |
| ECU-B | 10A | |
| ABS1 | 20A | ABS |
| ABS2 | 40A | ABS |
| BLW | 30A | Blower, blower motor |
| P/WDW | 30A | Window lifter |
| EPS | 50A | Electronic power steering |
| ECU-1 | 10A | ECM |
| EBU-2 | 20A | ECM |
| SNSR | 10A | Air conditioning, Fuel pump |
| INJ | 15A | Injector |
| A/CON | 10A | Air conditioner |
| HORN | 10A | Horn |
| BATT | 100A | Generator |
Engine compartment (Diesel)
Assignment of fuses in the engine compartment (Diesel)
| DESCRIPTION | AMP RATING | SECURED COMPONENTS |
| IGN 2 | 30A | Egnition lock |
| IGN 1 | 30A | Ignition switch, start relay |
| ECU | 30A | Fuel pump, generator, ECM |
| FFHS | 30A | FFHS |
| GLAD | 30A | Radiator fan |
| BATT | 50A | Headlight, heater relay |
| ABS | 10A | ABS |
| C/Lighter | 25A | C/lighter |
| F/PUMP | 15A | Automatic fuel cut-off switch |
| ECU-B | 10A | |
| ABS1 | 20A | ABS |
| ABS2 | 40A | ABS |
| BLW | 30A | Blower, blower motor |
| P/WDW | 30A | Window lifter |
| EPS | 50A | Electronic power steering |
| ECU-1 | 10A | ECM |
| EBU-2 | 20A | ECM |
| SNSR | 10A | Air conditioning, Fuel pump |
| INJ | 15A | Injector |
| A/CON | 10A | Air conditioner |
| HORN | 10A | Horn |
| BATT | 100A | Generator |
Removal and replacement process
To replace fuses and relays on a Hyundai Getz, you will need the following tools:
- plastic tweezers,
- 10 mm socket head,
- 10 mm wrench,
- crosshead screwdriver.
Before carrying out work, you must remove the key from the ignition switch.
Under the hood
The procedure is as follows:
- Open the hood.
- Open the unit cover by pressing the plastic latch on the windshield side.
- Pull out the blown fuse with tweezers and the faulty relay with your hand. If you need to replace fuse link No. 18 (protects the generator), then unscrew the fixing bolt with a key and a 10mm socket.
- Check the vehicle's electrical wiring and eliminate the cause of the blown fuse.
- Install new protective elements.
- Install the removed parts in reverse order.
In the cabin
The procedure is as follows:
- Remove the mounting block cover by grasping the notch in it with your fingers.
- To replace fuses: Use tweezers.
- Find and remove the burnt out element.
- Install new one.
- Remove the lower instrument panel trim by removing 2 screws from the lower left and right corners of the panel.
Technical characteristics of Hyundai Getz
The Hyundai Getz was produced with gasoline engines, but for Europe there was one diesel option available (we will not consider it in this manual on electrical equipment), all power units are 4-cylinder:
Hyundai Getz 1.1i (SOHC)
- The exact engine capacity is 1086 cm3;
- Valves - 12;
- Maximum power - 66 hp, 48.5 kW, 5500 rpm;
- Maximum speed - 154 km/h;
- Transmission - 5 speed manual transmission;
- Acceleration from 0 to 100 km/h - 15.6 seconds;
- Fuel consumption per 100 km/h (city / highway / combined cycle), liters - 6.9 / 4.7 / 5.5;
- Total weight - 1440 kg.
Hyundai Getz 1.3i (SOHC) - 2002-2005
- Engine capacity - 1341 cm3;
- Valves - 12;
- Maximum power - 82 hp, 60.2 kW, 5500 rpm;
- Maximum speed - 163 km/h;
- Transmission - 5 speed Manual transmission or 4 speed automatic transmission;
- Acceleration from 0 to 100 km/h (manual / automatic) - 11.5 / 14.8 s;
- Fuel consumption with manual / automatic at 100 km/h, l - 7 / 9 (urban cycle), 5 / 5.6 (suburban cycle), 5.7 / 6.9 (combined cycle);
- Total weight - 1530 kg.
The cigarette lighter on the Hyundai Getz does not work: reasons, repairs
Cigarette lighters in modern cars are needed not only for their intended purpose. The presence of various gadgets, for example, requires additional power sources for recharging. This need can be satisfied by just such a device, available on the Hyundai Getz.
The material will tell you how to quickly and correctly, and most importantly, carry out repairs yourself
Since one socket is not enough, you have to experiment with splitters, adapters, and sophisticated devices. Which sometimes leads to device failure, just when it is so needed. If someone has not used this attribute at all before, they may encounter it malfunctioning at the most inopportune moment.
Causes of cigarette lighter failure and their solutions
The design of the device is such that it always works in conjunction with a 12V outlet. They are located on one panel, separated by USB and AUX sockets, in front of the gearbox shift knob. The non-working state of one indicates a lack of power in the other.
The electronic device may only respond when the ignition is turned on, when the key is turned to the ACC mark at a certain level. When the problem does not disappear even if the necessary conditions are met, then you need to start repairing.
Now it will be easier to determine the reason. If there is no power at the cigarette lighter outlet, it is possible:
- The fuse has burned out (in the car interior);
- Electrical wiring is damaged;
- One of the sockets needs to be replaced with a new one.
Replacing the fuse
A simple procedure that involves determining the exact location of the failed element. On the left side of the dashboard on the driver's side, just below the headlight adjustment buttons, there is a rectangular plastic plug. Gently pull it towards you and slightly up the lid by the recess for your hand.
There is a fuse box built into the niche, one of which is what we need. According to the location diagram, the burnt out element is located in the bottom row, third from the left. The fuse is blue, with a current strength of 15A.
To dismantle, use special plastic tweezers, which are located along with the spare fuses under the hood, to the left of the battery along with the fuse box.
Replacement must be carried out only with an element of the same power. Otherwise, a spare part with a higher current may cause a short circuit and even a fire in the wiring.
Repairing the first type of fault will usually be enough to restore the functionality of the cigarette lighter.
Repairing the wiring supplying the cigarette lighter
In order to carry out this procedure, you need to go to a service station or find a suitable electrician. You won't be able to deal with this on your own. The only nuance that you can solve yourself is to check the presence of power at the terminals and open connections available for testing. You will need some equipment:
- tester;
- voltmeter;
- multimeter
Having even a little knowledge in the field of physics or electrical engineering at the school level, you can conduct a superficial diagnosis of the electrical component of the system. If all the wiring turns out to be in perfect order, then the third and only problem needs to be solved.
Replacing the mechanism of a damaged device
It is necessary to purchase a new seat for the plug of our cigarette lighter, which costs about $10. To dismantle a spare part that has become unusable, you must first open the cover of the 12V socket.
Using two fingers, the index and middle of either working hand, remove the panel by inserting your fingers into these two holes. The lid will give in easily with a little applied force and move outward. We make a replacement by first removing the terminals from the socket plug, disconnecting the burnt-out part, and installing a new one in its place.
We connect the connectors at the end of the wires back and, lightly pressing the socket, fix it in its original position. The renovation is complete.
Conclusion
These are all the main reasons and ways to solve them when the cigarette lighter on a Hyundai Getz does not work. It has been observed that using an electric compressor causes the fuse to fail. It would be nice to connect the device directly to the battery in order to have fewer problems in the future, both with the cigarette lighter and with the entire electrical system of the car.
Changing the cigarette lighter socket
After purchasing spare parts and tools, you can remove the device from the Hyundai Accent or Getz.
- Initially, you need to turn off the ignition, open the hood and remove the terminal from the negative terminal of the battery. This guarantees safe work, eliminating the risk of short circuit or fire.
- When replacing the cigarette lighter, the console must be removed. To do this, you need to unscrew the screw located in the bottom of the rear cup holder. It is located under the decorative trim.
- Tighten the handbrake and disconnect the knob of the gear shift knob.
- We get to the console at the back and lift it a little. You need to feel the block with the wires of the cigarette lighter plug and disconnect it.
- We remove the metal rod from the socket. There are two locking latches in the cigarette lighter socket. They need to be bent to release the clamps.
- Carefully prying up the cigarette lighter glass, pull it out of its seat.
- Feel for the latches of the backlight filter, and then remove it. The withdrawal process is complete.
Now you can begin to repair the part or replace it. The installation process is the reverse of that described earlier. Before starting the engine, check the voltage on the battery with the ignition off and on. If the drawdown is more than 0.5 Volts, then there is a short circuit.
Removing the cigarette lighter in Getz
Before work you will need to purchase the necessary tool. To remove the cigarette lighter of a Hyundai Getz or Accent you will need:
- screwdriver for removing self-tapping screws;
- gloves;
- tester to check the correct connection;
- additional wires of suitable cross-section (when replacing cables);
- soldering iron with solder for fixing problem areas;
- insulating tape;
- spare cigarette lighter.
There are different options on the market. The price of a Hyundai Accent or Getz cigarette lighter is 800-1500 rubles. It is advisable to buy an original product - this is what guarantees long-term operation of the device. It is important that the parts are accompanied by certificates of conformity.
