Maximum load capacity 300 tons with reach 3 m
Telescopic boom
15 - 60 m
Boom extension (jib)
10.5 - 28 m
Engine/power Liebherr engine / 450 kW
Drive / steering
12 x 8 x 10
Travel speed 80 km/h
Weight in transport position
72 t
Total counterweight weight
112.5 t
The safety system is equipped with a load limiter LICCON - 2, a system for testing the performance of working units, safety and shut-off hydraulic valves in case of rupture of hydraulic lines.
The crane is equipped with two additional lifting mechanisms. This option is used to work with two hooks to set the jib.
Reliable Liebherr crawler cranes with high lifting capacities
The Swiss company Liebherr is one of the leading companies in the manufacture of specialized construction equipment. The history of the corporation begins back in 1949. It was then that an ordinary engineer, Hans Liebherr, created a family business. Today, Liebherr factories are located in all countries of the world, and the Liebherr family is also at the head of the entire structure.
Unique qualities of Liebherr crawler cranes
One of the main specializations of the engineering company is the production of crawler cranes. This lifting equipment is used in the construction of almost all high-rise buildings. The specificity and purpose of cranes requires ensuring maximum operational safety and efficiency of the mechanisms. It is these qualities that have allowed Liebherr to become one of the leading manufacturers of construction equipment.
Crawler cranes of the LR and LTR series have become widespread among users all over the world.
Liebherr crawler crane The main positive features of Liebherr cranes include:
- Versatility. The equipment can be used not only to lift loads to high-rise objects, but also to install a bucket for quarrying and loading soil;
- Ease of transportation. This is due to the fact that any LR or LTR series crane has a fairly low operating weight and small dimensions;
- The unique self-assembly system of the entire structure eliminates the need to install an additional crane;
- Economical operation and repair. High-tech power equipment is adjusted in such a way as to reduce fuel consumption. If any part fails, replacing it will not cost much money. This is also facilitated by the accessibility of all components of Liebherr crawler cranes;
- Efficiency of use lies in the availability of a modern control system and multifunctional working equipment. A careful approach to each structural component of the crane allowed us to achieve maximum performance and convenience;
- The safety of all work is ensured by full control of the equipment using numerous electronic systems and sensors;
- An improved control system for the lifting mechanism allows you to control the movement of all elements with high accuracy. This not only simplifies the work process, but also protects the entire structure from damage. There are also load limiters here.
Series LR
This includes a wide range of lattice boom crawler crane models that are capable of delivering construction materials to heights of up to 223 metres. The maximum load weight depends on the exact crane model and modification.
The main features include the low weight of all parts, the possibility of self-unloading and assembly, and optimization of load capacity and maximum working height. This ensures the safety of surrounding objects, the construction crew and the safety of the structure itself.
Photo of the crawler crane LIEBHERR-LR-11301 When developing the Liebherr LR series cranes, engineers used the most modern methods and technologies, which made it possible to achieve optimal operational safety and high maneuverability of the crane even when working with dangerous and very heavy loads. This range includes the LR 1280, 1100, 1300 and 1130 cranes.
We consider the technical characteristics of Liebherr LR series crawler cranes in the table:
| Crane model | LR 1100 | LR1130 | LR1280 | LR1300 | LR 13000 |
| Engine power, kW | 270 | 270 | 450 | 1000 | 1000 |
| Traction force, kn | 175 | 175 | 215 | 215 | 215 |
| Maximum speed, km/h | 1,35 | 2,11 | 1,41 | 1,3 | 1.35 |
| Load capacity, t | 104,5 | 137,2 | 280 | 300 | 3000 |
| Boom length at max. load capacity, m | 3,1 | 3,5 | 4,3 | 4,5 | 4.5 |
| Main boom radius, m | 60 | 75 | 120 | 110 | 144 |
| Additional boom length, m | 66,8 | 78,5 | 95 | 113 | 12 |
| Rigid extension, m | 32 | 32 | 26 | 35 | 35 |
| Maximum lifting height, m | 101,8 | 125,5 | 150 | 172 | 240 |
| Crane weight, t | 47,3 | 65,5 | 120 | 290 | 280 |
Each LR series crane model meets not only safety requirements and building regulations, but also satisfies the desires and needs of each customer. Everything here is done as conveniently and comfortably as possible.
LTR Series
A distinctive feature of this series of Liebherr cranes is their high maneuverability and maneuverability.
Liebherr LTR series crawler crane Positive qualities include:
- High stability of the equipment, which is ensured by the presence of tracked running equipment. It does not fail on soft soils. The small distance between the chassis makes it possible to carry out lifting work in cramped conditions;
- Quick and easy installation. Liebherr telescopic cranes are equipped with the function of automatic self-unloading and assembly, so you can do without a special team;
- Ease of use and comfort of control. Every part of the attachment and powertrain is easy to access, making repairs or part replacement a breeze. The driver's seat is equipped with sound insulation, vibration protection, air conditioning and a convenient control panel;
- The telescopic boom allows for numerous modifications to make it easier to work in certain conditions. There is also the possibility of extending the boom using lattice sections.
The main models of this series include LTR 1030, 1060, 1100 and 1220 cranes. Their technical characteristics are presented in the table.
| Model | LTR 1100 | LTR 11200 | LTR 1060 | LTR 1220 |
| Engine power, kW | 129 | 270 | 129 | 230 |
| Load capacity, t | 100 | 1200 | 60 | 220 |
| Boom length at max. load capacity, m | 3 | 2,5 | 2 | 3 |
| Maximum height, m | 84 | 188 | 56 | 102 |
| Boom length, m | 52 | 100 | 4 | 60 |
| Extension size, m | 33 | 126 | 16 | 36 |
| Total crane weight, t | 52,6 | 380 | 26 | 90,5 |
The video shows the capabilities of Liebherr crawler cranes:
LIEBHERR LTM 1130-5.1 truck crane - technical specifications
Technical characteristics of LIEBHERR LTM 1130-5.1:
| Maximum load capacity/reach: | 130 t. / 3 m. |
| Main boom: | 12.7 – 60 m. |
| Lattice boom extension: | 10.8 - 33 m. |
| Chassis/crane engine: | 6-cylinder Liebherr diesel engine with turbocharger, 370 kW 4-cylinder Liebherr diesel engine with turbocharger, 145 kW |
| Maximum travel speed: | 80 km/h. |
| Wheel formula: | 10 x 8 x 10 |
| Weight in transport position: | 60 t. |
| Maximum counterweight: | 42 t. |
Liebherr LTM 1130-5.1 truck crane with a telescopic boom, with the possibility of various extension options, and has a high lifting capacity. Thanks to innovative technology, the use of different boom systems does not require additional effort. The compactness allows the LTM 1130-5.1 to maneuver in very limited conditions. Disc brakes, pioneered by Liebherr on mobile cranes, provide increased safety and efficiency.
The main features of the LTM 1130-5.1 are its long telescopic boom, high lifting capacity, exceptional maneuverability, as well as a wide range of equipment for comfort and safety. The 130 ton class crane features the most advanced technological features required for practical applications.
Compact, maneuverable, optimal in weight
- Telescopic boom 60 m long
- Two-section extension 19 m long with hydraulic adjustment (optional)
- Greater flexibility due to high load capacities with full and partial counterweight
- Chassis width 2.75 m with 16.00 R 25 tires
- Active speed-dependent steering of the rear axles
- Pneumatic disc brakes
- The total weight of the truck crane is 80 tons, including a counterweight of 9 tons, with a permissible axle load of 12 tons.
Chassis
- Six-cylinder diesel engine with gas turbine supercharging produced by the Liebherr concern 370 kW/503 hp.
- Automatic transmission AS-TRONIC made by ZF, 12 forward gears, 2 reverse gears
- Retarder ZF
- 2-speed transfer case, slow speed 0.78 km/h
- Drive axles 2, 4 and 5, axle 1 - optional
Modern chassis and transmission
The powerful Liebherr 6-cylinder turbocharged diesel engine with 370 kW/503 hp ensures excellent driving characteristics. The ZF 12-speed gearbox with AS-TRONIC automated shift system ensures high efficiency and comfort.
- Reduced fuel consumption thanks to a large number of gears and high efficiency dry clutch
- Excellent maneuverability and minimal crawling speed thanks to the two-speed transfer case
- Wear-resistant brakes with ZF retarder
- ABV - automatic brake lock prevention system with ASR traction control
Compact, manoeuvrable and weight-optimized,
the LTM 1130-5.1 can maneuver even in cramped conditions thanks to its exceptionally compact design.
- The length of the chassis (chassis) is 12.3 m
- Smallest turning radius - 10.4 m
- Truck crane width 2.75 m, with 16.00 R 25 tires
- Counterweight turning radius is 4.2 m
Hydropneumatic axle suspension "Niveaumatik"
- Maintenance-free suspension cylinders
- With a large safety margin for axle loads up to 40t
- Cylinder stroke +150/-100 mm
- High lateral stability when cornering
- Wide range of driving modes
Pneumatic disc brakes
- High braking force, improved handling
- Improved directional stability
- There is no fading (fading is a decrease in the effectiveness of the braking system when the brakes heat up)
- Increased service life
- Reduced time to replace linings
- Brake linings with wear indicator
5 steering programs
- Select programs by simply pressing a key
- Clear arrangement of service and display elements
- It is possible to switch programs while driving
- "Side travel" is easily controlled by the steering wheel, no need to lift the middle axle
Active rear axle steering
Electro-hydraulic steering of the rear axles occurs depending on the speed and steering angle of the front axle. Selecting one of five steering programs (P) is carried out using keys.
- Significant reduction in tire wear
- Increased maneuverability
- High stability at high speeds
- All 5 axles are steerable
P1 Driving on public roads Steering of axles 1 and 2 is carried out mechanically by the steering wheel. The steering of axles 3, 4 and 5 is “active” depending on the speed and steering angle of the front axles. At speeds above 30 km/h, the wheels of axles 3 and 4 are set to a straight position and locked; at speeds above 60 km/h, bridge 5 is also fixed in a straight position. P2 Minimum turning radius Depending on the rotation of the wheels of the front axles, you can use the steering wheel to turn the wheels of axles 3, 4, and 5 so that a minimum turning radius is obtained. RZ Diagonal-lateral travel The steering wheel turns the wheels of axles 3, 4 and 5 in the same direction in which the wheels of axles 1 and 2 turn. P4 Departure without skidding Steering of the wheels of axles 3, 4 and 5 is carried out depending on the turn of the front wheels axles so that the offset of the rear part of the chassis is minimal. P5 Independent control of rear axles The wheels of axles 1 and 2 are controlled by the steering wheel; Axles 3, 4 and 5 are controlled using keys, regardless of the rotation of the wheels of axles 1 and 2, while the rotation of the wheels of the 3rd axle is adjusted automatically, depending on the situation.
Rear axle control centering cylinder
- Automatic rear axle alignment in the event of a malfunction in the active rear axle control system
High level of safety - developed by Liebherr
- Centering cylinder for automatically straightening the rear axles in the event of a malfunction in the active rear axle control system
- Two independent hydraulic circuits driven by hydraulic pumps, from the wheels and from the engine
- Two independent control processors
Modern driver's and crane operator's cabins The modern driver's cabin and the tilt-back crane operator's cabin provide a comfortable and functional workplace. Operating and display elements are arranged in accordance with ergonomic requirements. This ensures safety and less fatigue when working.
Driver's cabin
- Corrosion-resistant sheet steel construction, cataphoretic dip priming
- Fiber composite doors with power windows
- Full safety glazing
- Tinted windows
- Electrically heated and controlled mirrors
- The driver's seat has air suspension and lumbar support
Crane cabin
- Corrosion-resistant construction made of galvanized sheet steel, powder coated
- All-round protective glazing
- Tinted windows, windshield can be removed
- Armored glass skylight
- The crane driver's seat has lumbar support
- Side retractable footrest
- The cabin can be tilted back by 20 degrees
Fast and reliable equipment The crane design allows for quick, safe and convenient installation of supports, installation of a counterweight, as well as installation of additional equipment. Stairs, steps, handles and railings provide increased safety for operating personnel.
Installing the crane on supports
- Control panel with membrane keyboard and electronic level indication
- Automatic crane leveling at the touch of a button
- Starting, stopping and adjusting engine speed from the control panel
- Illumination of the pole mounting area with four built-in spotlights
- Stroke of support cylinders: front 650 mm, rear 700 mm
- Retractable 2-stage beams with maintenance-free hydraulic extension system
Fully hydraulic telescoping system "TELEMATIK"
- Increased lifting capacity with long booms and long reach thanks to the “lightweight” telescoping system
- Single stage hydraulic cylinder with hydraulic clamps
- Telescoping system requires no maintenance
- Easy maintenance, telescoping process monitored on the LICCON screen
Powerful, long telescopic boom and functional lattice extensions The telescopic boom consists of an articulated section and 6 extension sections, which, using the proven single-cylinder TELEMATIK telescoping system, can be conveniently and automatically extended to the required length and secured there with pins.
- Telescopic boom 60 m long
- Two-section folding extension 10.8-19 m long; can be mounted at angles of 0′, 20° and 40°
- Hydraulic adjustment of the folding extension under full load from 0° to 40° (optional), interpolation of load capacity
- Hydraulic mounting tool for installing a folding extension
- 2 intermediate sections of 7 m each to extend the telescopic boom when working with a folding extension
- Mounting extension 2.9 m
- Additional block head
Large lifting capacity with both full and partial counterweight provides a wide range of possibilities when operating the truck crane
- High lateral stability thanks to the oval boom profile
- Telescoping under load
- Load capacity 10.5 t with boom length 60 m
- Optimized load capacity thanks to multiple telescoping options
- Maximum boom reach 72 m
- The maximum lifting height of the hook is 91 m.
High lifting capacity with unlocked telescopic boom
- High telescopic weights thanks to interpolation
- Separate load charts for holding loads on an unlocked telescopic boom
- Display on the LICCON monitor
Modular counterweight. Installing a counterweight is a matter of minutes
- Large number of counterweight options from 2.5 to 28.2 t
- Fast ballasting thanks to locking system
- Compact counterweight dimensions; for example, with a counterweight weighing 17.2 tons, its width is only 2.65 m.
- Counterweight radius is only 4.1 m
Lifting mechanism
- Cargo winch with built-in planetary gearbox and spring-loaded plate brake
- Rope pull 88 kN on outer layer
Reliable components The crane drive components are designed for high power and ensure delicate and precise handling of loads. They are optimized specifically for crane use and tested in rigorous, long-term tests.
- Crane engine: 4-cylinder diesel engine with gas turbine supercharging produced by the Liebherr concern, 145 kW/197 hp; optimized fuel consumption thanks to electronic control system
- Diesel-hydraulic crane drive, open oil circuits with electrical control “LOAD SENSING”; it is possible to perform 4 working movements simultaneously
- Electrical/electronic crane control via programmable controller and LICCON computer system
- The standard swivel mechanism is switchable: open or hydraulically clamped, so that the movement can be optimally adjusted to different conditions of use, for example for careful, precise work during installation or for fast work cycles
- Winches manufactured by Liebherr; rope pull 88 kN on the outer layer; Due to the high rope tension, less reeving is required
Centralized lubrication system
- The standard supply includes a centralized lubrication system for the slewing ring, boom support, boom lifting and lowering cylinder and winch bearings
- Uniform supply of lubricant
- The amount of lubricant is visible at any time thanks to the transparent container
Rotation mechanism
- Planetary gearbox, spring loaded plate brake
- Swing speed from 0 to 1.5 rpm infinitely adjustable
- Pre-select one of six speeds from 15% to 100%
- The rotation mechanism can be switched from “open” to “hydraulically clamped”
LICCON - testing system
- Fast fault localization without measuring tools
- Error code indication and description
- Convenient interactive control functions for all input and output signals
- Indication of functions and location of control system elements
ELECTRONIC CRANE CONTROL
LICCON - a computer system for correct and reliable operation of the crane The software for the mobile crane control system is developed by Liebherr. The basis is the computer system LICCON (Liebherr Computed Controlling). The system performs extensive information collection, management and control tasks. The control system components have proven themselves in operation all over the world in various climatic conditions.
LICCON - crane equipment and operation programs
- Application programs:
— Overload protection (OGP) — Program for equipping the boom with display on the screen — Program for working with display on the screen — Program for controlling the process of extending/retracting telescopic boom sections with display of the process on the screen
- Selecting combinations of equipment in a convenient dialog mode
- Representation of all important data by graphic symbols
- Reliable shutdown device when the permissible load moment is exceeded
- Indication of winch operation for precise lifting/lowering of loads with centimeter accuracy
LICCON – data bus technology All Liebherr mobile cranes use a wide-ranging data bus network. All important electrical and electronic components have their own microprocessors and are connected by only a small number of cables. Liebherr has developed its own data transmission system, taking into account the special requirements for truck-mounted cranes (LSB - Liebherr-System-Bus). Data bus technology increases reliability, comfort and safety during crane operation and movement:
- Increased reliability due to fewer cables and contacts
- Continuous self-testing of sensors
- Wide range of diagnostic capabilities, quick error recognition
Liebherr 100 ton crawler crane LTR 1100
Specifications
| Maximum lifting height, H, m: | 83 |
| Boom radius, B, m: | 52 + 19 |
| Cargo weight, W, t: | 115 |
| Wheel formula of the car: | Tracked |
| Crane dimensions, m (L*W*H): | 14.5 x 3.5 x 3.5 |
| Price per shift from, rub. (without VAT): | 32000 |
Description
To lift loads weighing up to 100 tons, we recommend renting a Liebherr LTR 1100 crawler crane. We will deliver the equipment to your construction site in Moscow or the Moscow region, and ensure its uninterrupted operation during the entire rental period. Price from 32,000 rubles for 8 hours of working time. The cost of the service is calculated individually based on the service life and the availability of additional services.
The minimum rental period for a truck crane will be 7 working hours + 1 hour of delivery in Moscow
Load capacity
Load capacity
Dimensions
The pictures show diagrams of the lifting capacity of the boom and jib, as well as a diagram of the dimensions of the truck crane.
Dimensions LIEBHERR LTM 1300
Dimensions in the figure are given in mm. A - 4000, B - 2065, C - 2552, D - 3700, E - 19°, F - 13°, G - 14°; R — trajectory when turning the front wheels; R1 - trajectory when turning with all wheels;
Below you can see the technical characteristics of other truck cranes
LIEBHERR available for
order
:
| Models | G/P, tone | Boom/jib length, m. | Shift cost*, rub | Delivery cost**, rub/km |
| LTM 1025 | 25 | 27/15 | 15 000/22 000 | 150 |
| LTM 1030 | 30 | 30/15 | 20 000/25 000 | 150 |
| LTM 1040 | 40 | 30/16 | 25 000/30 000 | 180 |
| LTM 1050 | 50 | 40/16 | 30 000/35 000 | 200 |
| LTM 1070 | 70 | 40/16 | 40 000/45 000 | 350 |
| LTM 1090 | 90 | 52/19 | 65 000/70 000 | 350 |
| LTM 1100 | 100 | 52 | negotiable | 400 |
| LTM 1120 | 120 | 56/22 | 85 000/95 000 | 400 |
| LTM 1160 | 160 | 60/22 | 120 000/130 000 | 400 |
| LTM 1180 | 180 | 60/35 | negotiable | 400 |
| LTM 1200 | 200 | 60/22 | 150 000/160 000 | 400 |
| LTM 1250 | 250 | 72/36 | 180 000/200 000 | 450 |
| LTM 1300 | 300 | 60/56 | negotiable | negotiable |
| LTM 1400 | 400 | 60/84 | negotiable | negotiable |
| LTM 1500 | 500 | 50/91 | negotiable | negotiable |
| LTM 1800 | 800 | 60/91 | negotiable | negotiable |
| LTM 11200 | 1200 | 100/48 | negotiable | negotiable |
| * The cost of the shift is indicated without VAT. Shift duration is 8 hours, including 1 hour of truck crane supply. The delivery time increases to 2 hours when performing work in the center of Moscow (within the Third Transport Ring), as well as outside the Moscow Ring Road (0-10 km). ** The cost of delivery of a truck crane is indicated for each kilometer over 10 km from the Moscow Ring Road. |
Reliable Liebherr crawler cranes with high lifting capacities
The Swiss company Liebherr is one of the leading companies in the manufacture of specialized construction equipment. The history of the corporation begins back in 1949. It was then that an ordinary engineer, Hans Liebherr, created a family business. Today, Liebherr factories are located in all countries of the world, and the Liebherr family is also at the head of the entire structure.
Unique qualities of Liebherr crawler cranes
One of the main specializations of the engineering company is the production of crawler cranes. This lifting equipment is used in the construction of almost all high-rise buildings. The specificity and purpose of cranes requires ensuring maximum operational safety and efficiency of the mechanisms. It is these qualities that have allowed Liebherr to become one of the leading manufacturers of construction equipment.
Crawler cranes of the LR and LTR series have become widespread among users all over the world.
Both types of lifting machines have all the necessary parameters for efficient, fast and economical work on a construction site.
Liebherr crawler crane The main positive features of Liebherr cranes include:
- Versatility. The equipment can be used not only to lift loads to high-rise objects, but also to install a bucket for quarrying and loading soil;
- Ease of transportation. This is due to the fact that any LR or LTR series crane has a fairly low operating weight and small dimensions;
- The unique self-assembly system of the entire structure eliminates the need to install an additional crane;
- Economical operation and repair. High-tech power equipment is adjusted in such a way as to reduce fuel consumption. If any part fails, replacing it will not cost much money. This is also facilitated by the accessibility of all components of Liebherr crawler cranes;
- Efficiency of use lies in the availability of a modern control system and multifunctional working equipment. A careful approach to each structural component of the crane allowed us to achieve maximum performance and convenience;
- The safety of all work is ensured by full control of the equipment using numerous electronic systems and sensors;
- An improved control system for the lifting mechanism allows you to control the movement of all elements with high accuracy. This not only simplifies the work process, but also protects the entire structure from damage. There are also load limiters here.
Then the installed boom unloads the remaining components, which can immediately be installed on the equipment. This assembly method allows even one person to install the crane.
Series LR
This includes a wide range of lattice boom crawler crane models that are capable of delivering construction materials to heights of up to 223 metres. The maximum load weight depends on the exact crane model and modification.
The main features include the low weight of all parts, the possibility of self-unloading and assembly, and optimization of load capacity and maximum working height. This ensures the safety of surrounding objects, the construction crew and the safety of the structure itself.
Photo of the crawler crane LIEBHERR-LR-11301 When developing the Liebherr LR series cranes, engineers used the most modern methods and technologies, which made it possible to achieve optimal operational safety and high maneuverability of the crane even when working with dangerous and very heavy loads. This range includes the LR 1280, 1100, 1300 and 1130 cranes.
We consider the technical characteristics of Liebherr LR series crawler cranes in the table:
| Crane model | LR 1100 | LR1130 | LR1280 | LR1300 | LR 13000 |
| Engine power, kW | 270 | 270 | 450 | 1000 | 1000 |
| Traction force, kn | 175 | 175 | 215 | 215 | 215 |
| Maximum speed, km/h | 1,35 | 2,11 | 1,41 | 1,3 | 1.35 |
| Load capacity, t | 104,5 | 137,2 | 280 | 300 | 3000 |
| Boom length at max. load capacity, m | 3,1 | 3,5 | 4,3 | 4,5 | 4.5 |
| Main boom radius, m | 60 | 75 | 120 | 110 | 144 |
| Additional boom length, m | 66,8 | 78,5 | 95 | 113 | 12 |
| Rigid extension, m | 32 | 32 | 26 | 35 | 35 |
| Maximum lifting height, m | 101,8 | 125,5 | 150 | 172 | 240 |
| Crane weight, t | 47,3 | 65,5 | 120 | 290 | 280 |
Rent of crawler crane Liebherr LTR 1100 – 100 tons
Rent a 100 ton Liebherr LTR 1100 crawler crane with a telescopic boom. This crane has a retractable boom of 52 meters and a lattice extension (jib) of 19 meters. The maximum lifting capacity of 100t is achieved when working with a moving object within a radius of 3 m from the center of the crane. The advantage of the Liebherr LTR series crawler crane over other analogues from other manufacturers is the ease of installation and assembly on site, which allows you to significantly save on delivery and assembly at your construction site. The whole priority lies in the 100 t telescopic boom, which can easily change the extension radius without using other special equipment. We can deliver this crane installation to any region of Russia: both to Moscow and any other region (St. Petersburg, Krasnodar, Crimea, Kaluga, Voronezh, Tver, Pskov, Yekaterinburg, Ryazan, etc.). All our crawler cranes have Rostechnadzor permits and are operated by experienced crane operators. If necessary, we will arrange for a specialist to visit the construction site to select special equipment and prepare the site for work.
Load capacity diagram LIEBHERR LTM 1300 without jib, with add. equipment
Additional equipment allows you to achieve incredible load capacity.
Load capacity values are given in tons; The boom reach is measured from the axis of rotation of the turntable; The lifting capacity values for the boom are only valid with the jib removed; Changes in load capacity are possible.
The truck crane is equipped with a three-section folding extension up to 36 m long, which can be installed at different angles to the boom.
The lattice jib is equipped with many accessories that allow you to dramatically expand the range of applications of the LIEBHERR LTM 1300 truck crane and achieve incredible lifting capacities when working with a jib.
Load capacity diagram LIEBHERR LTM 1300 with jib
has a tabular form and contains additions and mathematical calculations. To avoid mistakes in choosing a crane to order, call our specialists by phone: (495)988-9190. We will help you select the necessary equipment to perform exactly your tasks and minimize costs.
