Barrel trailer for Belarus tractors of all modifications

Features of operation of vacuum equipment

During the operation of vacuum equipment, it is necessary to observe certain conditions, thanks to which the equipment will operate properly for a long time:

• For perfect operation of the device, it is necessary to flush its lubrication system with new oil. Use of used oil is not allowed;
• the pump must be kept clean. The presence of contaminants can impair its performance and even lead to failure of the device;
• It is necessary to constantly monitor oil consumption, preventing it from reaching the minimum level. Average oil consumption is about 90 g/h;
• It is unacceptable to operate the pump without stopping for more than 1 hour;
• To determine the direction of rotation, you need to pay attention to the pump body, where the corresponding arrow is located. Pumps with right-hand rotation are purchased for installation on diesel vehicles. At the same time, pumps with left-hand rotation are installed on carburetor cars.

In our review article we talked about Grundfos sewage pumps with examples of popular models.

Read about plastic containers for sewage needs here.

You can read about how to choose a sewer system for a country house on this page of the site.

What is a sewage disposal machine?

Since we are looking at pumps installed on sludge sucking machines, let us explain what a sewer pump is. This is a set of wheeled equipment that pumps out wastewater or sewage from cesspools, reservoirs, septic tanks, and settling tanks. After pumping out, the machine delivers the contents to disposal sites, where it unloads the sewage.

A typical sewer truck consists of the following main elements:

• storage tank. This is a steel cylindrical tank with a slight slope for ease of unloading;
• Vacuum pump;
• signaling and safety device. Its presence prevents the tank from overflowing and alerts the operator;
• receiving hatch with suction hose;
• pipeline control valve;
• additional electrical equipment.

Sludge pumping machine for sewer pumping KO 505A
The vacuum sewer pumping machine works on the following principle. All equipment is powered by a running engine. The suction hose is immersed in a container with the contents to be pumped out. The vacuum pump is turned on, creating a vacuum in the tank. The tank is filled with sewage. Once it is completely filled, a safety device is activated, shutting off the engine. After arriving at the unloading site, the tank is emptied by gravity or due to air pressure in the pump.

Advice: When calling a sewer truck to your site, ensure that it can easily travel to the pumping site.

Buy a sewer barrel? With us it's as easy as shelling pears

The sewer barrel is one of the main structural elements of the sewer machine. This equipment is actively used in municipal services for cleaning drain and sewer systems, reservoirs and septic tanks.

Thus, the sewer truck collects, transports and delivers liquid waste to the disposal sites. It works on the principle of pumping out liquid using a vacuum pump.

The algorithm of actions for performing cleaning work is as follows:

1. At the cleaning site, a hose is connected to the vacuum cleaner.
2. The pumping system is activated.
3. Liquid waste is sucked into a pump, which directs it into a tank.
4. After the tank volume is filled, the waste is transported to the disposal site.

For the effective operation of this equipment, it is important to install a high-quality and spacious barrel on the sewer truck. However, before you buy a sewer barrel, you should determine its required volume. This indicator depends on the type of equipment used:

1. Small-sized - for use on private septic tanks.
2. Production – for industrial facilities.
3. Sludge sucking – for cleaning water bodies.

Sewage barrels are tanks that come as part of vacuum equipment and are installed on various chassis.

If you need to buy a barrel for a vacuum sewer truck, the choice should be made depending on the load capacity of the chassis. It is advisable not to allow it to exceed the weight of the equipment and the weight of transported concrete goods. The price of a barrel depends on the manufacturer, the thickness of the metal and its volume. You also need to take into account the cost of delivery of the tank, because... The cargo is voluminous and delivery over long distances can reach a significant amount.

To estimate the cost of delivering a tank from the terminal in Nizhny Novgorod to the terminal of the city closest to you, you need to find a form for calculating cargo delivery on the transport company’s website (for example, TK KIT https://tk-kit.ru/calculate), where you enter the tank data KO-503: Length L - 3400 mm, Width B - 1200 mm, Height H - 1560 mm, Overall volume - 6.4 m3, Tank weight -574 kg and select the city of departure N. Novgorod or Arzamas, city of receipt.

A sewer truck based on the GAZ 3307 has the option of automatically turning off the engine (only for gasoline engines) if the barrel is full and a waste unloading system, which is implemented using air pressure. The machine is also equipped with a safety mechanism.

The GAZ 3309 tank truck is designed in such a way that when it is completely filled, the safety signal device (SPU KO-503 0400000) is activated and an intermittent horn signal is activated.

The sewer truck based on the GAZ 53 has the most capacious barrel and a clean water compartment.

Thus, buying a tank for a sewer truck will not be difficult, since the choice of options in terms of price and technical indicators is quite wide. Vacuum sewage tank KO 503 is used for vacuum cleaning of wastewater and septic tanks. Specially designed for use in the municipal sector. It has such advantages as ease of maintenance and high performance.

Of all the modifications of special equipment presented on the market today, the vacuum machine РљРћ-520 has become the most widespread. It allows you to clean wastewater as quickly and efficiently as possible. The efficiency of the machine is ensured thanks to the specific equipment with which it is equipped. First of all, this is a tank, a pumping device, a drive, a safety mechanism, a suction hose, control valves and additional electrical equipment.

The GAZ 3307 tank is distinguished by an automatic overfill protection system. The GAZ 3309 tank truck is also equipped with a similar safety mechanism.

Any sewage disposal machine, regardless of modification, has a sealed tank, as well as a vacuum pump that creates a vacuum. The cleaning system (pumping out liquid waste) is started by turning on the car engine, which drives the pump. The wastewater is sucked through a hose and fills the tank. After the main stage of cleaning is completed, the tank serves as a container for transporting liquid waste.

www.pribormarket.ru

Purpose and operation of a vacuum pump

The vacuum pump for sewerage is designed to work in conjunction with other equipment installed on a sewer truck. With its help, the contents are pumped into a special tank, in which it is transported to the disposal site. The principle of operation of a vacuum pump is to create a vacuum in the working chamber in a short period of time . As soon as such a vacuum reaches the required value, the pumped-out substance (sewage, wastewater, steam) is sent to a storage tank. This type of pump is considered the most efficient in operation and safe for the environment.

Vacuum truck for GAZ-53

The GAZ plant discontinued the GAZ-53 model, replacing it in 1989 with the GAZ-3307 (carburetor engine) and GAZ-3309 (turbodiesel engine). In 2014, the plant began production of the fifth family of medium-duty trucks under the GAZ Next brand.

The vacuum machine on the GAZ-53 chassis is designed for collection and transportation to disposal sites of liquid waste that does not contain flammable, aggressive or explosive substances.

From us you can order the production of a vacuum barrel for the GAZ-53 sewer truck with or without installation.

The cost of a new container is about 130 thousand rubles .

Please check with the manager for the exact cost of the barrel with the required configuration by calling 8-800-222-03-10.

Or write to the chat. In the message, indicate which barrel and in what configuration you need, enter your name and phone number. We will calculate everything and call you back.

Vacuum truck GAZ-53

our work

We are a manufacturer of attachments. You can order from us:

• production of a new vacuum barrel for your car,
• supply of a complete set of equipment (barrel, pump, etc.),
• You can bring us your chassis with any attachment for conversion and receive your machine with new attachments. Including making changes to the PTS, if necessary.
• buy a vacuum truck on a new GAZ, KamAZ, Ural chassis, on a trailer or semi-trailer.

Purpose

The KO-503 tank is a cylindrical container that is part of a sewage disposal machine. Such products are installed on the wheeled platform GAZ-3309, GAZ-3307, etc. The tank has a volume of 3.75 cubic meters. The design is used for pumping, storing and transporting liquid waste that is generated during the cleaning of septic tanks, reservoirs, and industrial facilities. The tank is sealed, which prevents liquid leakage and unpleasant odors when transporting the contents.

The ko-503 tank is installed on the side members and securely fastened with a slight inclination towards the waste discharge. The vacuum barrel is equipped with a round or oblong viewing window. There is a neck at the top of the structure. It is equipped with a lid with a safety device that allows you to control the filling of the container and avoid overloading the vacuum pump. At the back of the barrel there is a bracket that is designed to secure the dry closet during cleaning.

Some modifications have a compartment for clean water in the front of the barrel.

There is a receiving hatch at the rear of the tank. When using special equipment, a hose is attached to the barrel and, using a pumping system, the waste is directed into a container. After filling the tank, the vehicle proceeds to the waste disposal site, where the barrel is emptied.

Ordering products

To order a KO-503 tank, fill out an application on our website and indicate which equipment you are interested in. We deliver goods throughout Moscow and other cities of the country. You can also buy all other spare parts for servicing municipal equipment.

Source

Types of vacuum pumps

• a high-vacuum pump will be useful when working with low pressures. Typically, 2 pumps connected in series are used;
• a low-vacuum pump reduces the pressure of the pumped waste. The device also creates pressure inherent in low vacuum;
• a fore-vacuum pump is used to obtain a high level of vacuum in the system. It provides conditions for the pump to operate at a higher vacuum level. The pump saves energy;
• The booster pump creates a medium vacuum in the system. It is usually installed between the foreline pump and its high-vacuum analogue;
• a pre-vacuum pump can be used to reduce the pressure of the contents, ranging from atmospheric level to a pressure at which another vacuum pump will operate normally.

Car trailer: Avito, Slando, Auto ru, Olx. Where can I buy

Here we are looking at the 500 liter model. Another passenger barrel on single-axle wheels. Serves for transporting kvass, milk, water, etc.

To operate the PC, it is enough to have category B license. The internal part is lined with stainless steel. The outside of the case is painted with moisture- and ultraviolet-resistant paint.

Equipped with a support stand and support wheel, equipped with R13 wheels. The base has plastic wings. For an extra charge, heating of the barrel and tap, a measuring ruler and a stirrer are offered.

In basic equipment it costs from 100 thousand rubles.

Model 86112-01

What do yellow numbers mean: what benefits do they provide, how to get them

All of them have positive reviews, are produced by trusted factories and have all the necessary list of documents and certificates confirming their suitability for transporting food-grade liquids.

The current rating includes tanks from the following manufacturers:

• Kurgan trailers;
• UralSpetsTrans;
• Start plant;
• Tanko;
• US-Auto.

Now let's look at each option separately.

US-Auto

Domestic company located in Nizhny Novgorod. Produces a series of food tanks and barrels for fuels and lubricants. Our rating includes a model with a volume of 450 liters, intended for bulk food products.

The PC has 1 axle, rubber-harness suspension. The outside is painted with a special paint, which makes the metal resistant to external factors. The interior is made of food grade stainless steel.

The current cost is from 140 thousand rubles in the basic configuration.

Tanko

The Nizhny Novgorod plant produces an extensive line of mobile tanks for cars and trucks.

An example of calculating the volume of a fuel tanker tank

On a trailer

On a semi-trailer

Fuel trucks on chassis

The volume of a fuel tanker tank, as a rule, is determined by the carrying capacity of the chassis on which the petroleum products tanker is mounted. So, if the carrying capacity of the chassis is 11225 kg, then the weight of a full tank together with the mass of the tank itself, pump and other equipment should not exceed 11225 kg. The weight of an empty tank truck with a volume of about 10-11000 liters is about 800 kg, which means that the weight of gasoline in the tank truck should not exceed 11225 kg (carriage capacity of the chassis) - 800 (weight of the tank truck and equipment) = 10425 kg. One liter of gasoline weighs approximately 830-860 grams. This means that the volume of gasoline weighing 10425 kg will be 12560 liters. This determines the maximum possible volume of a fuel tanker. For safety, the actual volume is made somewhat smaller. More than half of fuel tankers in Russia are mounted on the following chassis:

Is it always necessary to install a tanker truck with the maximum possible volume for a specific chassis? No, not always, if you have contracted to transport 10,000 liters of gasoline, then you must select a fuel tanker of the appropriate volume.

We produce both serial tank trucks for fuel tankers and tank trucks for individual orders without increasing the cost of products. From us you can order exactly the tank truck you need. To order, call us at 8-800-222-03-10 (calls within the Russian Federation are free, for calls from other countries call the number), or send a request by email [email protected]

Popular vacuum pump models

KO-503

This is a vacuum pump that operates fully at temperatures of -20+40 degrees. The pump body is cast iron. The cover is equipped with bearings that allow rotary rotation. The housing has holes for introducing lubricant. Lubricant comes from a nearby tank. This vacuum pump is installed on a GAZ 53 or GAZ 3309 sewer truck. Model KO-503 0214100 is designed for left-hand rotation, and the designation KO-503 0214100-02 indicates that the pump has right-hand rotation.

Pump parameters:

• Efficiency - 0.8-0.9;
• power - 6 kW;
• speed - 1450 per minute;
• pump capacity - 240 cubic meters/hour;
• rotary torsion - right and left are allowed;
• dimensions - 470 x 225 x 280 mm;
• weight - 90 kg.

KO-505A

This vacuum pump for a sewer truck is used on the basis of powerful vehicles such as ZIL, KAMAZ, URAL, MAZ. The pump is operated in a temperature range of -20 +40 degrees. The rotor rotates using bearings installed in the cover. The rotor body has built-in blades made of durable textolite. The pump housing is made of cast iron. For normal operation of the pump, a continuous supply of oil is necessary. It is provided that oil begins to flow into the mechanism automatically when the device is turned on.

Pump parameters:

• Efficiency - 0.8-0.9;
• power - 9 kW;
• speed - 1150 per minute;
• pump capacity - 310 cubic / h;
• rotary torsion - right and left are allowed;
• dimensions - 520 x 290 x 300 mm;
• weight - 110 kg.