Engine UMZ A275 EvoTech 2.7 GAZelle NEXT Euro-5 A2755.1000402 Re-equipment
Evotech 2.7. Tanaka cylinder head under GBO.
Tanaka block head for LPG for UMZ-A274 Evotech 2.7 engine
Evotech.
Evotech 2.7 cylinder head. Tanaka cylinder head. Gazelle Next Evotech. UMZ-A274. Tanaki. In the photo above you see the Evotech 2.7Tanaki cylinder head for factory LPG equipment, installed on a Gazelle car from the factory.
Evotech 2.7.
Tanaka cylinder head 4216. UMP Evotech. The photo above shows the holes for copper pipes with threads for HBO on the Gazelle. Such cylinder heads come from the factory and are intended for installation on Gazelle vehicles equipped from the factory with gas-cylinder equipment. If you installed the gas system on your Gazelle car yourself, then most likely you have an Evotech Tanaki 2.7 cylinder head for gasoline installed.
Tanaka GBO cylinder head.
Evotech LPG cylinder head. 4216 Evotech. All Evotech Tanaki 2.7 block heads are numbered. That is, each of them has its own individual serial serial number.
Evotech.
Evotech 2.7 cylinder head. Tanaka cylinder head. Tanaka cylinder head 4216. Price 23,000 rubles.
"Gazelle NEXT CNG" with 3-liter dual-fuel EvoTech
The Gorky Automobile Plant presented a new gas modification of its light-duty truck: the Gazelle NEXT CNG received an upgraded EvoTech 3.0 gas-petrol engine. As is clear from its designation, the displacement was increased from 2.7 to 3 liters, which, when running on gasoline, made it possible to increase the maximum power to 120 hp. and maximum torque up to 252 Nm. If the engine switches to methane power, these parameters are, respectively, 109 hp. and 225 Nm.
It will not be in demand: the use of compressed gas ensures a reduction in operating costs by 40-50% compared to gasoline and diesel analogues.
A little about the upgraded EvoTech dual-fuel engine with a displacement increased to 3 liters. Its important feature is the use of a cast iron cylinder block instead of the aluminum block installed on previous versions. This made it possible to reduce the heat load and increase the stability of the power unit at high temperatures. Changes affected the crankshaft and camshaft, cylinder head and piston. The EvoTech 3.0 design provides for minibuses to be equipped with a dual-circuit air conditioning system, and refrigerators to be equipped with two compressors.
“Gazelle NEXT CNG” is equipped with four gas cylinders with a total volume of 33.2 (all-metal van) to 41.6 (on-board modifications) cubic meters. The power reserve is 750 km, including 300 km on gas. Gas cylinder equipment manufactured by the Italian companies Emer and OMVL is certified according to UNECE Regulation No. 110. The multi-level engine safety system includes a high-speed valve (limiting gas leakage in case of damage to the gas tubes), a fire valve (providing gas release when the temperature exceeds 100 °C) and safety valve (provides gas release when the pressure exceeds 300 atm.).
Subscribe to our newsletter
Gazelle NEXT CNG3-liter EvoTechGazelle NEXTEvoTech 3.03-liter Evotekgas GazelleCNGmethane GazelleLPGDual fuel engine
Delivery terms
WE WILL SELECT the optimal delivery method in terms of time and cost
WE WILL SEND by the company with the most suitable conditions
WE WILL DELIVER the spare part to the transport company terminal for FREE.
Delivery is carried out by transport companies:
! The exact delivery cost is determined by the transport company.
! Items with prepayment are sent only
Free delivery for residents of Moscow, Vladimir and Ulyanovsk
Once a week we deliver spare parts to these cities. You can pick up your order at the place of arrival of our car.
Features of Gazelle engines
The main feature of the American engine on the Gazelle Next is its Chinese assembly. Engine spare parts are delivered to the Middle Kingdom, assembled and sent to Russian factories for installation in the car.
If you choose from an American engine and UMP EVO Tech, then it is better to install the latter on the Gazelle. Because Russian low-quality fuel, cold winters, and the careless attitude of car owners spoil engines.
Similar article Technical characteristics and reviews of the 2AZ FE engine
Characteristics of the Cummins ISF engine
Engines for Gazelle from Cummins ISF2 require careful care. The engine is equipped with heated fuel filters. Has a turbocharger.
The engine consists of four cylinders and is located freely under the hood of a domestic minibus. Engine dimensions: 606x641x632 mm. The weight of the motor is 214 kg.
Attention! Thanks to such a small size, this engine is even suitable for Gazelle Business.
It is equipped with an electronic injection system and Common Rail electromagnetic injectors. Such a system helps reduce vibration and noise levels of the engine.
Features of using imported components at Evotech
The creation of an engine with improved technical characteristics became possible thanks to new engineering solutions. For the implementation of which, it was necessary to use components from well-known global suppliers. It also required the installation of imported technological lines for high-quality assembly of the new power unit.
According to the project plans, fuel savings should be ensured by reducing the working volume of the internal combustion engine, increasing the compression ratio and significantly improving the processes occurring in the engine, optimizing the exhaust and intake tracts.
As a result of the improved cooling system, it was possible to reduce the load on the components and parts of the piston group, and optimize the recirculation of exhaust and crankcase gases. All this became possible thanks to the use of high-quality imported components.
The Evotech power unit used components and mechanisms from suppliers and partners representing well-known global brands:
- LG (South Korea) supplied pistons, valve springs, piston rings, plastic components, spark plugs, gaskets and a host of other small parts;
- Bosch (Germany) supplied sensors for various purposes: temperature, knock and synchronization sensors, sensors indicating engine crankshaft phases;
- Delphi (USA) supplied throttle devices, a fuel ramp damper, and injectors;
- Eaton (USA) supplied hydraulic compensators.
The work carried out to create this engine ensures low repair costs and eliminates vehicle downtime during long-term repairs. Ultimately, the carrier receives a reliable engine with an increased service life.
The UMZ 4216 engine, which was the prototype for the creation of Evotech, was particularly maintainable. It should be noted that the new motor’s high maintainability was inherited.
Auto-MM
Official GAZ dealer in Lipetsk
Professionals choose us!
- Cars (new and used)
- Car service
- Auto parts store
+7 (4742) 505-244
Application for special equipment
By clicking the “Leave a request” button, I confirm that I have read the Privacy Policy of the website
Request for refurbishment
By clicking the “Leave a request” button, I confirm that I have read the Privacy Policy of the website
Registration for participation in the presentation of new GAZ cars
By clicking the “Leave a request” button, I confirm that I have read the Privacy Policy of the website
Evotech cylinder head
LLC "TIRE MASTER" Tires for Gazelle small wholesale and retail. https://shinnymaster.ru/ Sales department Moscow: +7-495-740-95-71
Only the PARKMOTORS company sells from a warehouse in Moscow, in particular, block heads the UMZ-A274 Evotech 2.7 engine for gas-cylinder equipment and for gasoline. Evotech 2.7 Tanaki cylinder heads are considered the best compared to all other manufacturers.
Evotech 2.7. Tanaka cylinder head under GBO.
Tanaka block head for LPG for UMZ-A274 Evotech 2.7 engine
Evotech. Evotech 2.7 cylinder head. Tanaka cylinder head. Gazelle Next Evotech. UMZ-A274. Tanaki.
In the photo above you see the A274 Evotech 2.7 Tanaki cylinder head, primarily for the factory gas equipment installed on the Gazelle car from the factory.
Evotech 2.7. Tanaka 4216 cylinder head. UMP Evotech.
The photo above ultimately shows the holes for threaded copper pipes for the factory gas equipment for the Gazelle. Such cylinder heads primarily come from the factory and are intended for installation on Gazelle vehicles equipped from the factory with gas-cylinder equipment. If you installed the gas system on your Gazelle car yourself, then most likely you have an A274 Evotech Tanaki 2.7 cylinder head for gasoline installed.
Tanaka HBO cylinder head. Evotech LPG cylinder head. 4216 Evotech.
In addition, all Evotech Tanaki 2.7 block heads are numbered. That is, each of them has its own individual serial serial number.
Evotech. Evotech 2.7 cylinder head. Tanaka cylinder head. Block head Tanaka 4216.
Price 23,000 rub.
Evotech 2.7. Tanaka cylinder head for gasoline.
Evotech 2.7 Tanaka cylinder head for UMZ-A274 engine with GASOLINE.
Evotech. Evotech 2.7 cylinder head. Tanaka block head. Tanaka 4216 cylinder head. Gazelle Evotech.
In the photo above, you finally see the product Evotech 2.7 Tanaki block head installed on a UMZ-A274 gasoline engine for a Gazelle car.
Tanaka gasoline cylinder head. Evotech Tanaki petrol cylinder head.
First of all, each Evotech 2.7 Tanaka A274 block head has its own factory model designation, as well as a factory identification serial number.
NextEvotech. Tanaki.
Price 23,000 rub.
Pad. Block head Evotech 2.7 UMZ-A274.
Cylinder head gasket Evotech 2.7 UMZ-A274.
Price 800 rub.
Set of gaskets. Block head Evotech 2.7 UMZ-A274.
Cylinder head gasket set A274 Evotech 2.7
As a result, the composition of the UMZ-A274 cylinder head gasket kit
- A274-1003020 Head gasket however 1 pc.
- A274-1008080 Gasket in particular for the exhaust manifold 1 pc.
- A274-1007245 Valve cover gasket 1 pc.
- A274-1002116 Gasket primarily for the pusher box cover 2 pcs.
- A274-1009070 Gasket for oil sump 1 pc.
- A274.2310.1203240 Gasket of the exhaust pipe, of course, 1 pc.
- A274-1008018 Gasket for example receiver 4 pcs.
- А274-1107015 Throttle gasket 1 pc.
- A274-1306089 Gasket for the thermostat housing 1 pc.
Price 3000 rub.
Design features and technical characteristics
The Next series of vehicles has a wide range of applications.
The manufacturer produces the following modifications:
- all-metal van;
- tailgate for 3, 4, 5 and 6 m;
- awning without side;
- isothermal van;
- manufactured goods van;
- evotech business;
- minibus;
- platform for special equipment (lift, tow truck, dump truck, tank).
The machine is characterized by the following features:
- Reliability. The assembly uses parts, assemblies and mechanisms that have passed several stages of quality control. The equipment is supplied with imported units.
- Durability. The cabin is made of stainless steel and polymer plastic, resistant to shock and ultraviolet radiation. The frame and body are treated with materials that prevent corrosion.
- Durability. The chassis is designed for 700,000 km. The service life of gasoline engines is at least 500,000 km. The doors are equipped with closing mechanisms with increased wear resistance.
- High level of comfort. The pneumatic driver's seat is adjustable in several positions. Electric drives are installed on the mirrors and window lifts. The ergonomics of the dashboard ensures ease of driving.
- Lightweight and economical power plant. The four-cylinder petrol engine with a lower camshaft has a cylinder block and head made of aluminum. The valve covers, oil pan and part of the manifold are molded from durable polymer plastic.
- Build quality. After purchasing a car, the owner does not need to check the condition of components and assemblies. All parts and mechanisms are precisely adjusted to each other, the fasteners are tightened with the required force.
Important Review of the 4 best models of Italian Efco chainsaws
Specifications:
- engine type - gasoline atmospheric;
- number of valves - 8;
- cylinder diameter - 97 mm;
- rated power - 107 hp;
- torque - 221 Nm;
- cylinder volume - 2.69 l;
- rpm - 800-3400;
- maximum speed - 130 km/h;
- fuel consumption at speeds of 60 and 90 km/h - 9.8 and 12.0 liters per 100 km;
- tank capacity - 70 l;
- climbability - 27%;
- turning radius depending on the length of the chassis is 6-7.2 m.
The engine exhaust complies with Euro-5 standards. This allows vehicles of the Next model range to be used not only in large cities of Russia, but also in European countries where high environmental requirements are imposed on vehicles.
