KMU Hino manipulators from the Japanese manufacturer HINO in Moscow

A universal series of special equipment, consisting of a full-fledged flatbed truck and a crane-manipulator unit with a certain lifting capacity, is the Hino manipulator. Japanese machines are widely used in various loading and unloading and installation operations, when transporting a variety of structures, materials and equipment. Hino brand manipulators are especially relevant in small facilities where there is a need to use CMU in limited space.

Rental of HINO 700 manipulator up to 15 tons

The Hino 700 with a lifting capacity of 15 tons is indispensable when it comes to transporting heavy loads that require fast loading and unloading. Construction materials, parts of buildings, industrial equipment, metal structures will arrive at the site exactly on time and will be safely unloaded where needed.

The Soosan SCS866LS CMU has unlimited capabilities, despite its compact size. The maximum boom reach is 19.6 meters. Loads can be lifted up to 21 meters. Such a manipulator is a good alternative to a bulky crane that may not fit in cramped conditions.

The crane installation has various safety and control options (automatic winch brake, inclinometer to determine the operating range, automatic rotation locking system and much more).

Modification FM / tons (three-axle dump truck)

• Curb weight: 11.475 t.
• Gross weight: 26 t.
• Load on the front axle: 6 tons, on the rear axle – 20 tons.
• Chassis load capacity: 14.525 t (the design allows for a load weight of up to 20 t).
• Wheel formula: 6x4.
• Wheelbase: 3.9 m + 1.3 m.
• Overall length: 7.38 m. Width: 2.55 m. Height: 3.29 m.
• Rear overhang: 1,915 m.
• Chassis height rear: 1.075 m, front: 1.03 m.
• Turning radius on wheels: 8.5 m.
• Turning radius from wall to wall: 9.1 m.
• Differential ground clearance: 245 mm.
• Tire size: 295/80R22.5.

The body on HINO 500 FM dump trucks is a steel welded structure, with automatic opening of the tailgate, heated by exhaust gases. Its volume is 16 cubic meters. Unloading angle: 50%. Rise speed – 30 seconds. The body length is 5 m and the width is 2.272 m.

In the basic configuration, any of the Hino 500 variants has a rich list of equipment. Among the safety systems available in the database, one cannot fail to mention the pneumatic braking system, ABS, protection of passengers and the driver in a frontal collision.

Also in the standard version, the HINO 500 is equipped with 2-component mirrors, an automatic cab tilting system, fog lights, a lifting front panel, a standard branded audio system, an air suspension for the driver’s seat and a full-fledged berth. By the way, in Japan, as in many Asian countries, manufacturers sell these trucks with a regular driver’s seat - without air suspension.

Price list

Special offers

KAMAZ vehicles AVAILABLE 03/25/2019

MAZ cars on AVAILABILITY 03/25/2019

Truck cranes by AVAILABILITY/expected receipts as of 03/25/2019

Municipal equipment AVAILABLE March 25, 2019

STATE RESERVE Special equipment on AVAILABILITY 03/25/2019

Forklifts AVAILABLE 03/25/2019

GAZ cars in stock!!!

Rollers and Graders in stock!

SHACMAN dump trucks (Shaanxi) $76,000. in Stavropol

more details...

Tractors Belarus 82.1 in STOCK!!! in Stavropol at a price of RUB 1,232,000. more details...

Manufactured goods van HYUNDAI HD 120 priced at RUB 3,570,000. in Stavropol more details...

Conditions for renting special equipment

Gorspetstrans LLC supplies special equipment to sites in Moscow and the Moscow region. The minimum paid rental period is 1 work shift (7 hours + 1 hour for delivery). Both companies and individuals can order services.

To submit a request for an aerial platform, manipulator, crane or excavator, provide the operator with the following information:

• car delivery address;
• rental terms;
• Features of the property - difficult entrances, broken roads, narrow courtyards, etc.
• content of work;
• weight and volumes of cargo;
• special requests.

Payment Methods

• non-cash payment;
• in cash;
• bank cards of the MIR, Visa, Mastercard systems;
• payment systems YandexMoney, WebMoney, Qiwi.

Equipment delivery

The equipment is delivered to sites in Moscow and the Moscow region, at a distance of up to 300 km from the Moscow Ring Road. Delivery is carried out only when accompanied by our driver. Along with the equipment, we are ready to provide cover vehicles, as well as coordinate your work with the traffic police.

You can submit a rental application at any time by calling +7 (495) 150-45-56 or using the form on the website.

Rental of HINO 700 manipulator up to 15 tons

The Hino 700 with a lifting capacity of 15 tons is indispensable when it comes to transporting heavy loads that require fast loading and unloading. Construction materials, parts of buildings, industrial equipment, metal structures will arrive at the site exactly on time and will be safely unloaded where needed.

The Soosan SCS866LS CMU has unlimited capabilities, despite its compact size. The maximum boom reach is 19.6 meters. Loads can be lifted up to 21 meters. Such a manipulator is a good alternative to a bulky crane that may not fit in cramped conditions.

The crane installation has various safety and control options (automatic winch brake, inclinometer to determine the operating range, automatic rotation locking system and much more).

Price list

Conditions for renting special equipment

Gorspetstrans LLC supplies special equipment to sites in Moscow and the Moscow region. The minimum paid rental period is 1 work shift (7 hours + 1 hour for delivery). Both companies and individuals can order services.

To submit a request for an aerial platform, manipulator, crane or excavator, provide the operator with the following information:

• car delivery address;
• rental terms;
• Features of the property - difficult entrances, broken roads, narrow courtyards, etc.
• content of work;
• weight and volumes of cargo;
• special requests.

Payment Methods

• non-cash payment;
• in cash;
• bank cards of the MIR, Visa, Mastercard systems;
• payment systems YandexMoney, WebMoney, Qiwi.

Equipment delivery

The equipment is delivered to sites in Moscow and the Moscow region, at a distance of up to 300 km from the Moscow Ring Road. Delivery is carried out only when accompanied by our driver. Along with the equipment, we are ready to provide cover vehicles, as well as coordinate your work with the traffic police.

You can submit a rental application at any time by calling +7 (495) 150-45-56 or using the form on the website.

HINO manipulators

The Japanese manufacturer of CMUs, the Hino company, produces its equipment together with the Toyota company near the city of Tokyo. Hino manipulators are a universal type of special equipment, equipped with a high-performance crane unit with a lifting capacity of 8 to 20 tons.

Hino CMUs are indispensable assistants in such areas as construction, manufacturing and agriculture, which is why they are widely used throughout the world, including in Russia.

Currently, the company produces equipment of the Hino 500 and 700 series. These CMUs are full-fledged vehicles capable of transporting heavy, bulky cargo over long distances on almost any type of road surface.

New diesel engines and a modern transmission make Hino manipulators very mobile and productive even off-road.

Steering and instrument panel

The instrument panel of the Hino 500 is shifted to a lower position relative to the driver. This shift increases visibility and makes driving easier. Levers and buttons are assembled into a single panel and are within direct access.

Instrument panel HINO 500

Monitor boards have enlarged screens. For better color perception, the indicators are equipped with powerful LEDs.

The steering column extends to the forward and up position. The steering wheel position is locked using a separate lever.

The gear shift lever is located in close proximity to the driver. Smooth movement of the handle makes it easy to operate the machine.

Among the features of Hino KMU are:

• modern electronic filling;
• variety of configurations;
• powerful diesel engines;
• high reliability and unpretentiousness;
• low fuel consumption;
• reliable axles and transmission elements;
• adaptability to work in difficult Russian climatic conditions;
• affordable price.

Some Hino CMU models are adapted for long trips: they have additional passenger and sleeping space. Almost all of these models are equipped with road tires with a smooth tread, which have proven themselves to be excellent when driving on highways.

Hino manipulators have high technical performance, which makes them so popular around the world. The unit is mounted on the frame of a truck, which, depending on the configuration, can have either rear-wheel drive or all-wheel drive. The machines can also be equipped with engines running on liquefied gas.

All-wheel drive versions can be equipped with three drive axles with differential locks. A modern transfer case significantly increases the cross-country ability of this vehicle. Each machine has an automatic system that regulates the speed of the power plant depending on the operating mode, which saves fuel.

Hino CMUs are assembled according to the standard scheme: the driver’s cabin, then the manipulator, and the loading platform is located in the rear part.

Brake system

The brake system of the car is pneumatic. All wheels are equipped with disc brakes with separate axle circuits. Disc brakes have an automatic disc pad clearance adjuster.

The handbrake is equipped with spring energy accumulators. To block reverse motion when driving on an inclined section, there is an engine brake.

HINO 500 chassis

Hino manipulator - what is it and where is it used?

A universal series of special equipment, consisting of a full-fledged flatbed truck and a crane-manipulator unit with a certain lifting capacity, is the Hino manipulator. Japanese machines are widely used in various loading and unloading and installation operations, when transporting a variety of structures, materials and equipment. Hino brand manipulators are especially relevant in small facilities where there is a need to use CMU in limited space.

Features of Hino CMU

Hino brand manipulators are represented in several series, each of which has its own technical characteristics.

Hino 300

The Hino 300 series includes several modifications of vehicles weighing 6500 kg with a load capacity of 4.5 tons and a side length of up to 504 cm. The vehicles use a four-cylinder diesel engine with turbocharging and intercooler, developing power up to 150 hp. s., and a fully synchronized five-speed manual gearbox. The car has a 4x2 wheel arrangement, in which both suspensions are dependent.

The braking system of a car with a Hino 300 manipulator includes ventilated discs and additional mountain brakes. The manipulator is equipped with a three-seater, fairly comfortable cabin that does not provide an additional bed. The Hino 300 crane-manipulator is a telescopic 4-section boom with a load moment of 4848 kg and allows you to move loads weighing up to 3 tons. If all three sections are extended, the load capacity is reduced to 330 kg.

Hino 500

The Hino 500 series loader cranes are multifunctional special equipment for handling cargo in any conditions without the need to use auxiliary loading equipment. The machines are characterized by an aesthetic appearance, the ergonomics of a standard three-seater cabin with a berth, and ease of operation. A vehicle weighing 12 tons is capable of carrying up to 6 tons of cargo. The engine of the car is a six-cylinder diesel unit with a power of 260 hp. With. and equipped with a turbocharger. The gearbox is manual with 6 steps and full synchronization. The vehicle has a 4×2 wheel arrangement.

The Hino 500 crane-manipulator is equipped with a four-section boom with a telescopic reach, the maximum lifting capacity of which is 3030 kg, the boom reach distance is up to 12.3 meters. Depending on the number of extended sections, the load capacity takes the following values: one section - 1180 kg, two - 680 kg, three sections - 480 kg.

Hino 700

Hino 700 series machines belong to the category of heavy special equipment. In addition, the Hino 700 series vehicle has a 6x4 wheel arrangement and is equipped with a double cab with one berth. The CMU of a vehicle with a Hino 700 manipulator provides a telescopic boom, characterized by increased rigidity and capable of lifting up to 3030 kg with a load moment of 12.4 kg. If all three sections are extended, the installation's load capacity is reduced to 830 kg. The boom extends at a speed of 727 cm in 21.5 s.

Cabin structure

The control cabin of the HINO 500 truck is equipped with four spring springs. To access the working units, the cabin moves forward. To protect the cabin from rust, an anti-corrosion coating is provided.

Car interior HINO 500

The salon is equipped with three seats - a driver and two passenger seats. The driver's seat has pneumatic position adjustment. This avoids shocks and vibrations when moving.

The middle seat converts into a dining table. For trips over long distances there is a sleeping bag.

Wide impact-resistant glass provides increased visibility. Reverse traffic is controlled by the rear view mirrors.

To protect the driver and passengers, the front panel of the cabin is equipped with airbags.

Hino Ranger Series

As part of the Ranger series, trucks are produced in two categories, differing in gross weight:

• the first group includes machines weighing from 7500 to 8000 kg;
• the second - more than 10.3 tons.

Lightweight models of the Ranger series, produced under the brands FC, FD and FX, have overall lengths from 770 to 1200 cm. The cabin can be regular or wide, the transmission is six-speed. Special equipment of these models can be equipped with in-line diesel engines with 5 cylinders and a volume of 4.7 liters with a power of 180 hp. With. or 6.4 l at 210–225 l. With.

In addition, the Hino Ranger crane can be equipped with a 6-cylinder power unit with a volume of 8 liters and a power of 200 hp. pp., running on compressed natural gas. Cars are equipped with pneumohydraulic drum brakes. The only all-wheel drive vehicle in the lightweight Ranger series is the FX model with a five-cylinder diesel power plant, the technical characteristics of which are as follows: volume 6.4 liters with a power of 220 hp. With. The total weight of the machine is 8400 kg with a minimum load capacity of 4000 kg.

The Hino Ranger group of heavier handling vehicles includes two-axle trucks of the FE, FG, FJ, GD (4x2) and GX (4x4) brands. The total weight of the various models ranges from 10.3 to 14.8 tons. In addition, the series includes a Hino model GK crane with a 6x4 wheel arrangement and a 6-speed manual transmission. This model is equipped with an in-line diesel engine with 5 or 6 cylinders. Ranger trucks are also designed to extend the boom gradually, allowing the load moment to be used as efficiently as possible.

A distinctive feature of Hino Ranger series manipulators is their high level of reliability, thanks to which the machines have gained wide popularity all over the world.

Detailed technical specifications

This is interesting: Tarpan cultivator: characteristics, engine, equipment

Scope of application

Hino manipulators are optimally suited for moving in space, loading, unloading and transporting relatively oversized cargo, the weight of which is no more than 5 tons. At the same time, an important feature of the special equipment in question is the ability to perform work with loads located behind obstacles or below ground level, in particular when constructing wells or trenches.

The most important advantages of Hino manipulators are their simplicity of design and excellent reliability, strength and durability. The hook is equipped with a cable suspension, which makes it much easier to manipulate the load, including the ability to control its position during movement. Manipulators, including the Hino 700 series, are also equipped with a smooth lifting and lowering function, which allows you to work even with fragile and fragile objects without compromising their integrity.

Thanks to the listed characteristics and features, the Hino series handling equipment is an excellent option for use in the construction industry, warehouse, forestry or public utilities. Manipulators are capable of successfully moving a wide variety of types of cargo.

1. Various materials, including construction;
2. Containers and containers of various sizes;
3. Garage buildings and cabins;
4. Relatively compact special equipment;
5. Many other types of cargo.

In addition to cargo transportation and construction work, Hino CMUs are widely used in the elimination of rubble and other consequences of emergency situations.