The most popular models of compact American Bobcat loaders

The Bobcat loader is a small-sized equipment used for digging soil, laying communications, repairing and constructing road surfaces. Allows you to facilitate work during unloading and loading operations. Produced by the American company of the same name at production facilities in the Czech Republic.

S630

The model set a line of units with larger frames and reduced consumption of fuels and lubricants.
The Bobcat S630 has increased the length of the base and added the ability for the working tool to make radial turns. Thanks to this, the machine operates more efficiently in difficult conditions and is equipped with a large number of replaceable equipment. Bobcat technical characteristics:

• dimensions - 3.5 x 2.0 x 3.9 m;
• total weight - 3.50 tons;
• height: to which the bucket rises - 3.07 m;
• on which the bucket is unloaded - 2.4 m;

load capacity - 1.04 t; travel speed - 11.4 (with load) and 19.8 km/h without load; fuel consumption - 17 l/h; ground clearance - 41 cm; tipping force of the machine - 1.9 tons.

Modification 773

The Bobcat front loader with index 773 was produced by the company in 1999-2002. It has dimensions of 3.31 x 1.73 x 1.94 m, skid steer, and a bucket lift height of 3 m. It has a Kubota V2203-E engine with a power of 37 kW and is capable of lifting a load weighing 860 kg. It has:

• a system that protects the machine from hacking;
• particulate filter, which reduces engine emissions of harmful substances into the atmosphere;
• tipping load limit - 1.77 t.

Wheeled Skid Steer Loaders

In this model, the movement of the wheels is driven by hydraulic motors. It is thanks to this that the equipment can rotate around its own axis without any problems. That is why this model is considered the most maneuverable, because with diversified rotation of the wheels, the turning angle is minimized.

When choosing a wheel or front-end loader, you should consider the terrain in which it will be used. Skid steer loaders can often slip and dig into the ground. For this reason, it is highly not recommended to put it into operation on loose soils. For such terrain, a front-end loader is best suited, because it is not capable of breaking the surface of the earth.

But wheeled models are very popular on hard surface areas where free space is limited. Also, the main advantage of wheeled vehicles is that they are able to independently move from one object to another.

Mustang

The Mustang skid steer is made in the USA. This is a whole line of loaders with various characteristics. They are compact and sometimes ultra-compact. This is a technique that does an excellent job in confined spaces.

Mustang is a mini front loader with a side-swivel body. This greatly facilitates many manipulations with tools. There are many different attachments for such a machine. At the same time, the buyer will be pleased with the cost of this equipment. The price for a mini loader sometimes does not exceed 1 million rubles. It's also worth noting that this car is built entirely in the USA, with the exception of some models that have a Japanese engine. All other brand loaders have American Cummins with 100 hp.

Attachments

One of the differences between Bobket loaders and their analogues is the large number of attachments with which they can work.

Some of its types require the installation of additional control kits, re-equipping the cab with Lexan fencing, including a thicker front door (up to 1.2 cm), top and rear windows (0.6).

The list of attachments that ensure the versatility and versatility of mini loaders includes:

• grader for leveling work;
• a brush with bristles for sweeping areas;
• dump hopper;
• concrete pump for supplying concrete mixtures and mortar over a distance;
• vibrating roller for compacting base layers, coatings on sidewalks and roads;
• circular saw for cutting wood;
• rotary brush cutter for removing overgrown trees and overgrown shrubs;
• concrete mixing bucket for preparing concrete, cement-sand mixtures, mortars;
• toothed ripper for destroying asphalt concrete, crushed stone surfaces of roads and sidewalks;
• cold milling machine for mixing materials with cement and other binders when passing;
• backhoe;
• universal forks equipped with a grip;
• spreader of bulk material for sprinkling roads and sidewalks with de-icing materials;
• earth leveler for leveling slopes of earthen embankments;
• rotary cultivator;
• turf layer for laying lawns and strengthening slopes;
• industrial takeover;
• hydraulic hammer for destruction of monolithic foundations and coatings;
• rotary snow blower for removing snow on roads and sidewalks;
• trencher for laying cables and pipes;
• bulldozer knife, which is used to level crushed stone, sand, gravel;
• auger drill for constructing planting holes and foundation pits.

Bobcat S175H mini loader

Bobcat S175H mini loader

The Bobcat S175H mini loader model is developed on the basis of the S175 model and is its more powerful version. It has accumulated all the advantages of the previous model range and new technical developments of today.

The main difference between the S175H and the base machine is the letter “H”. To effectively carry out labor-intensive and large-scale construction work, the company's engineers have developed a reinforced hydraulic system.

The letter “H” in the tail number indicates an additionally installed hydraulic pump, which allows the hydraulic system to develop the high flow force necessary to work with additional attachments. The S175H model is capable of working with road milling machines, a circular saw, a concrete pump, a stump and branch destroyer, and productive versions of a trencher and a hydraulic hammer.

The letter “H” in the tail number comes from the abbreviation High Flow (high pressure). Installation of an additional pump is carried out only upon additional order and at the manufacturer’s facilities.

Universal loader

Bobcat S175H belongs to the class of universal construction equipment. The high performance indicators of the model allow the use of up to 100 types of additional devices and units, which are aimed at expanding the range of application of the model.

The S175H is successfully used in industries such as agriculture, utilities, forestry, terminal and warehouse infrastructure, and construction. The main advantage of the S175H model is its compact size and high performance for its class of equipment.

The use of the machine in conditions of limited or cramped working space is possible due to its low weight, short wheelbase and skid steer. The latter allows the S175H to unfold almost on the spot. The overall dimensions of the model are: length without bucket - 2.58 meters, width along the wheelbase - 1.67 meters, height with operator's cabin - 1.93 meters.

Performance characteristics

The main working tool of the Bobcat S175H is the bucket. Selecting compatible attachments for the S175H allows you to operate buckets of different shapes, purposes and sizes. The volume of buckets varies from 0.36 to 0.92 cubic meters.

Buckets can be standard, for heavy work, for distributing feed, for preparing concrete mixture. The maximum lifting height of the bucket is 3 meters, the unloading height of the bucket is 2.31 meters. These parameters are in demand when working with trucks and high sides. For example, when loading garbage or construction materials into a dump truck.

The performance characteristics of the Bobcat S175H mini loader include a rated lifting capacity of 895 kilograms and a tipping load of 1872 kilograms.

The performance of the reinforced hydraulic system of the Bobket S175H mini loader is 100 liters per minute, versus the S175's capacity of 64 liters per minute. The total operating weight of the Bobket S175H mini wheel loader is 2873 kilograms. The model is an indispensable assistant when performing a wide range of construction work.

Less common models

A lot of them. Among the wheeled ones are:

• S70 with the smallest dimensions of 2.47 x 0.91 x 1.81 m, the ability to lift a payload of 343 kg and a 3-cylinder engine with a power of 16.8 kW;
• Bobcat S650 with a rated lifting capacity of 1.28 tons, dimensions of 3.47 x 1.88 x 2.06 m, lift height of 3.15 and power unit power of 55.4 kW;
• Bobcat S770, which lifts a payload of 1.57 tons to a height of 3.35 m in a loading bucket, is equipped with a powerful (68.6 kW) Kubota / V3800-DI-DI-T-E3 engine, high-flow hydraulics, air conditioning, panel Deluxe controls and operates at 2 speeds;
• S850, which has the largest lifting capacity (1.76 t), dimensions (3.75 x 2.03 x 2.12 m), bucket lift height (3.66 m), but relatively small (11.4 km/h ) movement speed.

Of the tracked loaders capable of working on soft and loose soils, these are:

• T110 with a rated lifting capacity of 505 kg, tipping load of 1.44 t, travel speed of 8 km/h, dimensions 2.97 x 1.27 x 1.88 m, wheelbase 1.30 m, Kubota 4-cylinder liquid-cooled diesel engine / V2403-M-DI-E3, with a power of 31.2 kW;
• T770, featuring a more powerful (74 kW) motor of the same brand, a load capacity of 1.51 tons and the ability to travel at a speed of 18.3 km/h.

Popular models of mini loaders

As an example of popular skid steer models developed by Caterpillar, consider the 232D, 242D and 262D. All are wheeled, skid-steer, and powered by patented Cat C 2.2 engines. (for model 232D) or C3.3B DIT turbo (for the other two). Such loaders differ among themselves in weight, nominal working load capacity and power:

• 232D. This is the lightest model discussed in the review. Its operating weight is 2.818 kg, power is 44.9 kW, and load capacity is 839 kg. Such equipment can be purchased for use on delicate surfaces, moving light and medium loads;

242D. These are mini loaders of average weight and power - 3.166 tons and 55.4 kW, respectively. The rated load capacity of the equipment is 975 kg, which allows you to use special equipment to perform various tasks;

262D. The equipment has an operating weight of 3.634 tons. In terms of lifting capacity, such equipment also exceeds the models described above and has an indicator of 1225 kg, which expands the range of loads lifted. The total power of the machine is 55.4 kW.

Cat skid steer loaders offer the following distinct benefits:

• The best cabin in its category. It is characterized by increased comfort and ergonomics. The Cat loader cab features a modular, one-piece design that is compact and durable. It is sealed and has excess pressure, which guarantees effective reduction of noise and dust levels and provides comfortable working conditions. All-round visibility from the Cat equipment cab improves site safety;
• high power equipment. The loaders have a power transmission with increased performance, which is achieved through the introduction of a number of modern technologies. These include electronic torque control, a unique pedal/manual throttle control with a decelerator pedal, and the presence of an additional 2-speed drive mechanism;
• powerful hydraulic system. For demanding, complex jobs that require maximum machine performance, Cat mini loaders can be equipped with an XPS hydraulic system that has increased flow, thereby increasing the capabilities of the attachment;
• versatility in use. A wide range of work tools are available for Cat loaders. This allows you to significantly expand the functionality of the machine and the range of tasks performed with its help, eliminating the need to maintain a large fleet of equipment;
• excellent technical and operational characteristics. Loaders from this manufacturer are equipped with Cat Intelligent Leveling (ILEV) - an intelligent leveling system. It provides access to a number of useful features such as bi-directional leveling and return to dig, as well as electronic attachment positioning.

Russian variations on a theme

Today Kurganmashzavod offers three models of mini-loaders - MKSM-800 with a capacity of 800 kg, MKSM-600 with a capacity of 600 kg and MKSM-1000 with a capacity of 1000 kg, and each with a wide range of attachments, including such complex equipment as excavator and concrete mixers. To improve maneuverability, steel tracks are offered. Loaders are equipped with Hatz and Cummins engines.

Important Combine harvester SK-6 Kolos: review, technical characteristics, owner reviews

MKSM-800 remains the most popular model due to its price (about 1 million rubles) and the best reliability among domestic mini-loaders, while the not very sophisticated design remains unchanged. And when it comes to such purely utilitarian machines, then design fades into the background, giving way to functionality, reliability and price. The competing Uralvagonzavod attaches more importance to design; at exhibitions the company demonstrates the PUM-500 loader with an ornate design. But this does not help him, since reliability has always been the weak point of the Universal Compact Loaders. The plant produces models PUM-500 and PUM-500U, PUM-600, PUM-800, PUM-1000, PUM-1250 (the digital index indicates the load capacity in kg), a train of attachments for them, including a vacuum sweeper, excavator , concrete mixing equipment, compressors, pumps, trailers, and tracks. Loaders are equipped with Vladimir air-cooled diesel engines D-120, D-144 and D-145, which also does not increase their reliability. The PUM-500U modification is equipped with a Hatz engine. In 2008, the plant presented its new generation loader PMK-6-02 with a capacity of 600 kg with a Deutz engine and Bosch Rexroth hydraulics. Compatibility with PUM-500 attachments is provided.

The Belarusian Amkodor, which is close to us historically and technically, offers its latest model, Amkodor-211, with a capacity of 1200 kg and a Minsk engine with a power of 57 kW. The loader was given a streamlined shape, characteristic of all new models. "Amkodor-211" can work with 15 replaceable working parts produced by Amkodor OJSC - a brush, a jaw gripper, a concrete mixer, a hydraulic hammer, a drill, a rotary-milling snow blower, excavator equipment, etc.

Russian and Belarusian factories, without further ado, use a simple, but reliable and effective radial bucket lifting scheme.

Among the “Europeans”, Locust loaders from the small Slovak company WAY Indastries as have become widespread on the Russian market. The machines are remarkable in all respects, made at a high design and technological level. The line consists of 6 wheeled models with a lifting capacity from 450 to 1200 kg with a radial bucket lifting pattern. For a number of models, the Speed+ modification is available with twice the transport speed.

Locust loaders, which are externally canonical, differ somewhat in their internal content. Locust has a door that spans the entire height of the cabin, and the floor is almost flat - getting in and out is easy and convenient. There is no roll bar, no safety arms, just a belt. Slovak engineers conducted research and came to the conclusion that the arc or levers themselves are dangerous and a simple belt is preferable. The basic package includes joystick control; a lever option is not provided.

The range of standard machines is completed by the L 1203 Telspeed, which combines the advantages of telescoping and skid steer. The maximum load capacity of the machine is 1200 kg, at full reach – 560 kg. The extension hydraulic cylinders are hidden in the boom and are controlled by joysticks. The demand for this model is small and its production is limited.

The Way Industries as plant, which produces Locust mini-loaders, last year developed two tracked models - Locust L1003CT and 1303CT, which allow you to change the tracked base to a wheeled one. The European Locust does not lag behind the progenitor of mini-loaders, having advantages in technical solutions in terms of fuel consumption (3.5...5 l/hour), boom lift height and accessibility to components and internal units. Today, six models L453, L752, L753, L853, L903, L1203 are produced with a carrying capacity of 450...1200 kg, equipped with a Yanmar engine (Japan) that meets the Euro 3 standard.

Part 1 Part 2

Review of the main series

With side rotation

This technique is capable of lifting loads to great heights while remaining in one place. This ability has led to the use of models in this series in small spaces where the ability to maneuver is limited. A comfortable cabin with increased sound insulation ensures comfortable work for the driver.

By individual order, you can purchase forklifts with especially durable tires.

Photo Bobcat S 175

Telescopic technology

Loaders of this series provide efficient work with cargo at high altitudes or at a significant distance from the cabin. Each model has additional supports for stability as standard. There is also a stabilization system that ensures cabin balance. Telehandlers are used on uneven terrain. The main models of this series are T 2250 and T 40140.

Photo Bobcat T 40140

Tracked

The manufacturer has equipped the loaders with a reliable frame, which allows the use of tracked vehicles on moving ground. The most popular models of tracked loaders are T 110 and T 190.

Photo Bobcat T190

With double twist

Bobcat models in this series have two control systems. The operating mode is selected automatically using a special option on the panel in the driver's cabin.

It could be:

• wheel steering;
• turn-on-side control.

Photo Bobcat A770
Mini loaders are initially equipped with a vertical bucket. Typical representatives of this series are models A 300 and A 770.

Question price?

Do you urgently need universal equipment for working in a warehouse and helping on a construction site? offers to buy a mini loader with a wide range of attachments for these and other purposes. This technique was originally created as a universal assistant for farmers in North America.

It has compact dimensions, is economical and has high performance. There is no job that a mini loader cannot handle, which you can buy in one of our specialized centers in Tula, Voronezh, Kaluga and Ryazan.

Lonking mini loaders

Lonking is one of the largest manufacturers of special equipment in China and regularly ranks among the Top 20 best global brands in its category. In the wide range of models of this brand, there was a worthy place for mini-loaders. Lonking began developing its models after a thorough analysis of the products of market leaders - companies CAT, BobCat and Komatsu.

It is not surprising that today many managers of Russian enterprises prefer to buy mini loaders made in China. After all, they combine functionality, reliability, high performance and an affordable price.

Among the main advantages of the brand’s mini loaders:

• long service life;
• hydraulics from the German company Bosch Rexroth;
• low operating costs;
• two-position speed shift system;
• adapted to Russian conditions and fuel;
• high resistance of hoses to aggressive environments;
• wide range of attachments;
• ergonomic control;
• comfortable cabin with air conditioning.

In general, used forklifts cost from 200,000 rubles, depending on the year, condition, and configuration. But it’s better to check the price specifically with the manager.

Mini loaders Bobcat (Bobcat)

The world's first skid steer was created in North Dakota by Melroe Manufacturing Company. The technique became so popular that the manufacturer changed its name to the name of one of the models - Bobcat.

The company developed the original Bob-tach frame, the design of which made it possible to change a wide range of attachments in 1-2 minutes. Today, it is this scheme that underlies 90% of the world's mini loaders.

Among the main advantages of Bobcat equipment are:

• impressive maneuverability;
• ergonomic control;
• high performance;
• more than 60 types of attachments;
• safety for the operator and others;
• high build quality;
• compact dimensions;
• price corresponding to quality.

Technical parameters of Bobcat S175 in numbers

• Overall dimensions: length - 2.588 meters (without bucket), 3.309 meters (with standard bucket); width – 1.75 meters; height with operator’s cabin – 1.938 meters.
• Tire width, 10-16.5 / 10-ply - 1.676 meters.
• Total weight – 2,855 kg (excluding additional equipment).
• The maximum carrying capacity according to the passport is 896 kg.
• Travel speed is 12-18 km/h.
• Tipping force 1.8 tons.
• The maximum lifting height of the bucket is 3.0 meters.
• The turning radius of the sides with a standard bucket is 2.0 meters.
• Ground clearance – 191 mm.
• Working height – 3.862 meters.
• The rear overhang angle is 23 degrees.
• Wheelbase – 1030 mm.
• Track width, tires 10-16.5 / 10-ply: 1.385 meters.
• The rollback at the ground is 25 degrees.
• The unloading height with a standard bucket is 2,310 meters.
• The height to the bucket hinge pin is 3.002 meters.
• The unloading radius at maximum height is 753 mm.
• The unloading angle at maximum height is 42 degrees.
• The rollback at the highest boom lift height is 95 degrees.
• The width of the bucket is 68 inches - 1.727 meters.
• Volume of filling tanks: chain drive housing reservoir – 30.3 l; cooling systems with heater – 11.3 l; cooling systems without heater –10.2 l; engine lubrication system (with oil filter) – 8.7 l; diesel fuel tank – 90.8 l; hydraulic reservoir – 18.2 l; hydraulic/hydrostatic system - 34.1 l.

Nutritional Features

The basis of feeding wild cats at home is considered to be not very fatty beef. In order to improve protein diversity, animals are given raw chicken eggs and exclusively sea fish. To improve the functioning of the gastrointestinal tract, wheat or rye bran, vegetable oil, and barley sprouts are added to the diet. From natural food, adult cats are certainly offered “live food” - killed hares, mice, wild birds. Feeding occurs once a day. It is necessary to carry out a weekly fasting day for the animal; only fresh purified water is allowed. The diet plan is as follows: 3 days - meat, 1 day - fish, 2 days - “live food”.

Operating conditions and fuel consumption

Additionally, it is important to note that fuel consumption on mini loaders will directly depend on operating conditions. Therefore they are divided into 3 separate types:

• The light ones are designed to work with communications, during long periods of downtime, as well as with the expectation of moving to work sites.
• Medium mini-loaders are designed for loading from stacks, layers with periods of downtime, as well as transfer.
• Heavy ones include digging from the formation and trenching.

Factors to consider include operator skill level, types of materials and work cycles, and overall job site efficiency. For this reason, fuel consumption figures are often taken as approximate and indicative based on normal field conditions.

Specifications

The increased width of the Bobcat S175 with a proportionally longer wheelbase has improved its stability on any surface. Thanks to its compact dimensions (height - 1938 mm, width - 1727 mm, length - 3309 mm), the loader is easy to maneuver and turn around in cramped conditions.

The maximum weight of the load lifted with the Bobcat C175 is 900 kg, and the tipping load level is 1872 kg. Thanks to modified hydraulics, the low-profile loader bucket can be raised to a height of up to 3 meters, which greatly facilitates loading onto tall vehicles.

Other parameters of Bobcat S175:

• ground clearance - 191 mm;
• maximum turning radius – 2001 mm;
• track – 1385 mm;
• bucket lifting force – 1601 dN;
• operating weight – 2853 kg;
• travel speed – 0-17.9 km/h.

Fuel consumption

The fuel consumption of this model is 11 l/hour. One fill of the Bobcat S175 tank, which holds 90 liters, is enough for a whole day of work.

S175

The model is the most popular in Russia. It is the most universal in scope of application. It has a front-mounted loading mechanism and a bucket. It has:

• enlarged and strengthened frame;
• wide wheelbase, which improves the stability of the mechanism;
• many options to ensure safe operation.

See » TOP 4 Mustang mini loaders and their device features

The weight of the Bobcat S175 mini loader is 2.85 tons, dimensions are 3.31 x 1.68 x 1.94 m. Its operation is provided by a Kubota/V2203-M-DI-E2B-BC-3 diesel power unit with a fuel consumption of 11 liters / h, having 4 cylinders, turbocharging, volume - 2196 cm³ and power - 46 hp.

The unit is capable of:

• lift and move a load weighing 795 kg;
• lift the bucket to a height of 3 m;
• travel at a speed of 11.8 km/h in 1st gear and 17.9 in 2nd gear;
• tilt the bucket for 2.4 seconds, return it to the starting position in 1.9;
• raise and lower the boom in 3.5 and 2.5 seconds, respectively.

The car has 3 types of brakes:

• worker, operating from 2 independent hydrostatic systems and controlled during movements by 2 levers;
• additional, representing hydrostatic transmission;
• parking, which is activated by a manual switch in the form of a disk located on the dashboard.

A high degree of operator safety is ensured by:

• safety frame, part of which is the armrest of the chair;
• handrails and a step to help you get in/out of the cab;
• a seat belt that holds the operator in the seat during rapid movements;
• rear window, which is an emergency exit;
• BICS control blocking system, which does not allow starting the engine or activating the hydraulic drive when the seat frame is not lowered;
• emergency boom lowering handle.

Device

Machines under the Bobcat brand are popular in more than 20 countries around the world. Available in several modifications, they are capable of performing different jobs. Have:

• load capacity - 343-1758 kg;
• movement speed - 9.8-11.8 km/h;
• tipping load - 686-3515 kg;
• dimensions - 2.47-3.60 x 0.91-2.03 x 1.81-2.12 m;
• wheelbase - 0.72-1.34 m;
• fuel tank capacity - 24.6-124.2 l;
• weight - 1.27-4.54 tons.

Bobcat vehicles are produced on wheels and tracks. They can be with single or double side rotation, and have a telescopic boom. With a single rotation, they remain in place when lifting a load; with a double rotation, they are equipped with 2 control systems and can move while performing work. The presence of tracks increases the cross-country ability of the models; working with a telescopic boom simplifies operations on difficult terrain and at a distance.

Features of mini loaders:

• painting the cabin and elements white;
• an opening rear door that allows you to easily service the engine, battery, cooling system, and hydraulic system units;
• protection of the top and side glazing from falling pieces of concrete, debris, stones;
• automatic control over the operation of hydraulic systems and power units, their quick shutdown in emergency situations;
• glazing of the cabin on all sides and from above, allowing the operator to control the situation;
• automatic control blocking.

The power unit of mini loaders is diesel, Kubota brand, of varying power and volume. Equipped with a gas exhaust system with a muffler and spark arrester. Equipped with pre-heating of spark plugs before start, water cooling. The motor ensures the operation of all machine systems.

Models with wheel propulsion are equipped with 10-ply or special tires for working on different soils and terrain. If necessary, it is possible to install all-terrain tires or wheels with offset rims. The transmission drive of the units is hydrostatic, 4 x 4. The wheels are driven by chain drives in which there are no intermediate sprockets.

The safety of the loader is ensured by:

• a special button, pressing which activates the machine’s self-monitoring mode for the position of the loaded bucket when lifting;
• almost vertical lifting of the boom, which eliminates the occurrence of an overturning moment;
• extended wheelbase;
• wide wheels located outside the unit body;
• rear overhang, which acts as a counterweight when lifting loads.

The door through which one enters the cabin is located in the front of Bobket loaders. It is spacious inside and features the highest possible comfort for this type of unit. The chair is equipped with a headrest, an adjustment and vibration stabilization system, and comfortable side armrests. There is a safety frame at the rear that lowers and protects the operator.

The inside of the cabin is covered with foam materials that reduce noise levels and provide insulation. It is equipped with a heating system, ventilation, and overhead lighting. The loader is equipped with an audible signal and a reverse light signal.

Bobcat backhoe loaders - general description

Powerful, reliable and productive. This is how we can characterize the line of cars in this class, which is produced by a company from the USA. All four models have one engine - Perkins/1104C-44T, with a volume of 4.4 liters, diesel. In general, these machines are the fruit of international and even intercontinental cooperation. For example, the rear axles are fitted with Italian Carraro and German ZF.

Engine power Perkins 100 hp The weight of the vehicles is from 6.6 to 8.7 tons, depending on the model. They have a universal loading bucket with a volume of 1 m3. Another feature of all models is comfortable operator cabins, designed with great comfort - you can install custom-made air conditioning, the steering column is adjustable, there are heated windows and many others, undoubtedly pleasant for the operator of the machine human functions.

A backhoe and a loader bucket are installed as standard on all models. As optional equipment, you can change buckets of different sizes, install a hydraulic hammer, an additional extendable boom, and forks for loading pallets.

Let's talk about the Bobcat BX models in more detail.

• This is the lightest representative of the series; in its normal configuration, the car weighs 6600 kilograms. Overall length 5.7 meters, height 3.55, width 2.2 meters. The backhoe excavator is capable of digging holes and trenches up to 4.8 meters deep. Ground clearance 385 mm. The loading height of the loader bucket is 3.5 meters. So this excavator is capable of working with any dump trucks.

  Bobcat B700 can be used to perform various construction and excavation work, landscaping, and laying communications. A Synchro Shuttle gearbox from Carraro, 4-speed, was installed. The hydraulic system is single-cylinder, with an unloading valve. You can note the adjustable seat in the cab, good visibility for the operator.

  Read also:  Why the Calm chainsaw does not start. Why won't my chainsaw start? Frequent malfunctions and ways to solve them

• This is a multi-functional backhoe loader that can be used for:
• Digging trenches and pits;

Moving and loading bulk cargo and construction waste into a dump truck;

• For loading and unloading operations (with forks installed);
• To perform landscaping and landscape design work;
• For the destruction of road surfaces (with an additional canopy installed - a hydraulic jackhammer).

When parking, the mechanical parking brake is used. The total weight of the vehicle (as standard) is 7.8 tons. A ZF (Germany) transmission is installed, 4 speeds forward, 4 reverse. Hydraulic multi-disc oil brakes.

Leading manufacturers and brands

Nowadays you can find different brands and models of skid steers on the market. But the most popular ones, which are worth highlighting and highlighting in our mini-review, are presented below. This:

• Mini loaders MKSM;
• Bobcat mini loaders;
• Mini loaders Mustang.

With some regret, and perhaps pride, we must point out that only one of these brands is domestic.

These machines need to be assessed from different angles. It all depends on what tasks are set for the technology.

For some users, lifting capacity is important; for others, maneuverability is critical, such as when the skid steer is used for excavation, trenching, or in a cramped production or warehouse environment. Moreover, each of the listed brands offers several models, with different parameters, functions and purposes.

When choosing a forklift, renting it or intending to buy it, you should always pay attention not only to the make/brand, but also to the model

Mini loader MKSM

This wonderful car is produced in Siberia, in the glorious city of Kurgan. MKSM stands for “multi-purpose municipal construction vehicle.” But in fact, it is synonymous with reliable, modern productive equipment, which was created by the hands of Russian engineers and workers. It may not boast the grace of contours and the most advanced functions and electronics, but the MKSM is an inexpensive, durable, all-weather, load-lifting and powerful machine.

Important Review of the convenient and reliable Swedish-made Husqvarna 142 chainsaw

MKSM is a whole series of mini-loaders with different purposes. In this line from Kurganmashzavod you will find models MKSM-400, 600, 800, 1000. The most common development among consumers is the MKSM 800 mini-loader. This version combines all the advantages necessary for a modern mini-loader. It is load-lifting, multifunctional, thanks to the numerous canopies offered, and is able to work in any weather. A very maneuverable mini-loader, assembled in Kurgan. In recent years, imported engines have been installed there, which makes the car even more attractive, given the low price.

Mini loader MUSTANG

The American Mustang mini wheel loader is produced only in factories in the USA. The technology is known all over the world for its compactness and even super-compactness. An excellent choice if you need to perform loading and other work in limited spaces, for example, in industrial premises.

This mini loader has a skid-steer body, which makes work very easy. The manufacturing company also offers a large selection of attachments. Those who want to buy this car can also be pleased with the price - for some models it does not exceed one million rubles. It should also be noted that most models have American engines.

Mini loader BOBCAT

All models of Bobcat mini loaders are produced in the USA, at a plant in North Dakota. This is a technique that has definitely become legendary, with a word meaning simply “skid loader” in many languages ​​around the world. Also in our country, many older generation production workers use the word “bobcat” in the common sense.

The company produces various models. There is a Bobcat on wheels, and there is one on tracks. Available in skid steer and rotating wheelset models. The Bobcat mini loader comes in a variety of lifting capacities, from half a ton to 1,700 kilograms. Loading height and boom length vary widely.

S530

The Bobcat S530 mini loader has most technical parameters similar to the S175 model. The differences are greater productivity, the ability to work in hard-to-reach places, which is ensured by the vertical position of the lifting boom in the process of lifting, carrying and lowering the load.

The machine is equipped with:

• more powerful Kubota / V2403-MDI-E3B Interim Tier 4 engine with a volume of 2600 cm³ with liquid cooling and a power of 49 hp;
• has a mass of 2.82 tons;
• dimensions - 3.38 x 1.73 x 1.97 m;
• capable of lifting a load of 839 kg to a height of 3.02 cm;
• tipping load is limited to 1.68 t;
• the unit moves at a speed of 11.8 km/h;
• consumes 4.5-5.5 l/h of fuel during operation.

T2250

This is a representative of the Bobcat series of telehandlers. It is the lightest in it (4.70 tons), can lift a payload of 2.2 tons and has a travel speed of 7 km/h. It has dimensions of 4.2 x 1.8 x 2.2 m, ground clearance of 29.4 cm, wheelbase length of 2.3 m. It has a 4-cylinder Kubota / V3800-DI Turbo engine running on diesel. Power unit power - 76.1 hp.

The Bobcat t2250 loader has advantages and differences:

• spacious cabin with all-round visibility;
• powerful hydraulic transmission;
• 2 gears ensuring the delivery of different forces to the executive body;
• control of the hydraulic system using joysticks, which increased the accuracy of equipment movements;
• optimal placement of working blocks;
• boom base, which optimally distributes the load on the structure and ensures the stability of the unit;
• minimum turning radius of 3.17 m and the ability to work with a payload weighing 0.95 tons.

Attachments

Like other Bobcat mini-loaders, the Bobcat S650 compact loader is equipped with a quick-change system called Bob-Tach. With its help, the mini-loader operator does not need to leave the cab and monitor the correctness of the manipulations, or resort to dismantling the organ and installing another manually. This allows you to significantly reduce the downtime of the Bobcat S650 loader when changing attachments, and also perform these manipulations without any additional effort.

In addition to the bucket, the main types of additional equipment for the Bobcat S650 mini loader include:

• for landscaping - soil leveler, rakes, circular saws, crushers, shredders, water sprinklers, mowers, brushes, devices and accessories for winter snow removal;
• for excavation work - graders, diggers, scrapers, trenchers, special turf layers;
• for road work - vibrating rollers, dumps, picks, milling cutters, drills;
• for the construction industry - concrete mixers and concrete pumps, special-purpose buckets (double-jaw, frame, industrial and construction), dump bins, pallet forks.

Also, as additional equipment, devices for pallet forks, tracks, adapters for buckets, and devices for tilting the bucket are used. A special Power Bob-Tach attachment frame is also used as an accessory that increases the efficiency of machine use.

How to operate equipment

To control the loader use:

1. 2 levers located on the sides of the seat. They regulate the speed of the car and direction, and perform braking.
2. 2 pedals that are operated by feet. The left one controls the boom, the right one controls the bucket.
3. Buttons located to the left of the operator. They are used to control hydraulic systems.
4. The ignition switch, which is on the right. There are also indication buttons here that allow you to monitor all processes.

To start moving the forklift:

1. Get into the cabin and close the door.
2. Sit in a chair, fasten your seat belt.
3. Lower the rear frame, which protects the driver.
4. Release the parking brake.
5. Start the engine.
6. Press the appropriate button, which activates the loader's hydraulic system.

Finish the work by performing the above manipulations in reverse order. The machine is equipped with a special system that, after turning off the engine, returns the attachment to its original position. If for some reason the bucket does not go down, then to unlock the exit door you need to press the red square button located near the seat armrest, turn it and lift it. As a result, the bucket will lower and you can leave the cabin.