Motoblock components
Motoblock NEVA MB-23B-10 hp.
The transmission of the Neva walk-behind tractor consists of 1 reverse gear and 2 forward gears. Using transmission gears that have a tension roller, torque is transmitted from the motor to the gearbox. If any foreign objects get into the system, the belt will slip and therefore the engine will not be damaged. This design has proven itself on the positive side: the walk-behind tractor engine has a long service life.
Gearbox of the walk-behind tractor "Neva" 10 l. With. oil-filled and sealed. In addition, it is equipped with a durable aluminum housing. All components of the gearbox need to be lubricated periodically. This can be done with specialized oil; it must be used at the time when the gear shafts begin to rotate in the bearings. Gearbox of the walk-behind tractor "Neva" 10 l. With. works perfectly in any operating conditions.
Additional wheel of the Neva walk-behind tractor 10 hp
This model uses a motor from Briggs & Stratton Intek. The unit is characterized by a high level of power and durability. The frame in the Neva walk-behind tractor is characterized by high strength. Manufacturers manufacture this element taking into account difficult working conditions.
Pneumatic wheels are used to move equipment together with additional mechanisms. Thanks to the axle separation system, you can set the drive to only 1 wheel. This system simplifies the control of the Neva walk-behind tractor.
The special equipment has several more elements: additional cutters, a depth stop and a coupling bracket. Milling cutters are needed for processing soil. To connect a device that does not have an active wire, you need to use a coupling bracket. The limiter is used to monitor the speed of movement, as well as to control the depth of processing.
TOP 7 best NEVA walk-behind tractors
The popularity of NEVA walk-behind tractors is due to their good quality; the manufacturer took a responsible approach to the matter, equipping the models with Japanese, American and Russian engines. You can install any attachment on the equipment - a plow, hiller, weeder-ripper, cultivator, potato planter or potato digger, snow blower, various cleaning brushes, a cart and much more. All this expands the range of tasks that can be easily handled by the same walk-behind tractor.
It is also worth noting the design advantages of NEVA devices:
- A wide range of gear-chain gears housed in an aluminum housing;
- High traction force achieved through a transmission close to that of a car;
- Convenient location of all controls, allowing you to operate the unit without special skills.
NEVA walk-behind tractors are equipped with Briggs&Stratton, Yamaha, Zongshen, Honda, Kasei, Subaru engines or domestic engines of our own brand MOTOTEHNIKA NEVA.
Neva MB-23B-10.0 10.06 hp
A powerful and heavy walk-behind tractor processes all types of soil; it can easily tidy up an area heavily overgrown with weeds or plow uncultivated land. Design features and components from renowned manufacturers allow you to operate the equipment in any, even the most difficult conditions, regardless of the time of year. The gearbox of the walk-behind tractor is made of aluminum alloy, which provides better heat dissipation and increased service life compared to metal cases. The high-torque Briggs & Stratton engine consumes clean fuel and is unpretentious, and the ability to unlock the wheels significantly increases the maneuverability of the walk-behind tractor. According to owner reviews, this popular model is great for farms and even commercial use.
Advantages:
- there is a reduction range of gears;
- good quality materials;
- high motor power;
- compatibility with a variety of additional equipment;
- maneuverability;
- Track wideners are standard.
Flaws:
- due to the large mass, it is difficult to replace wheels with cutters;
- short and tight gear shift lever.
Neva MB-2B-6.5 RS 6.53 hp
One of the best walk-behind tractors from NEVA is equipped with a high-tech engine from Briggs&Stratton, a professional Vanguard series. Its advantages include an increased service life, easy starting in any weather, thanks to the CDI ignition system. And also in the nickel-plated coating of the piston and cylinder wall, which protects them when using low-quality fuel. This reliable motor is paired with one of the manufacturer’s most famous proprietary developments - the MultiAGRO multi-speed gearbox, which ensures optimal movement speed when carrying out any work. According to the owners' reviews, this equipment and wide functionality make this walk-behind tractor the best in price-quality combination.
Advantages:
- powerful and unpretentious engine;
- shifting gears on the steering wheel;
- low gears;
- gearbox "MultiAGRO";
- large selection of attachments;
- affordable price.
Flaws:
- Scheduled oil changes are difficult;
- strong vibration under load.
Neva MB2-B MultiAgro (Vanguard 6.5) PRO 6.53 hp
A high-quality walk-behind tractor is distinguished by its versatility, ease of operation and comfort in operation. A large selection of additional equipment allows you to use it to loosen and plow the soil, plant and harvest potatoes, transport cargo and even remove snow. A powerful engine connected to a gear-chain reducer produces a traction force of 300 KGS - sufficient to easily perform the entire range of agricultural work. The gear shift occurs smoothly, without jerking, and the lever itself, located on the steering wheel, greatly simplifies the choice of the optimal speed. According to reviews, this model is excellent for a summer residence, farming, and even use in public utilities.
Advantages:
- eight-speed gearbox;
- 4-stroke Vanguard professional series engine;
- high reliability;
- low fuel consumption;
- durability of components;
- convenient gear shifting.
Flaws:
- difficult change of equipment due to the large mass.
Neva MB2-Y (MX175) PRO 6 hp.
The popular model, which appeared in 1990, is still one of the market leaders. The secret of this success lies in the highest quality of all components of the walk-behind tractor, in particular the high-resource Japanese Yamaha MX 175 engine, as well as an excellent combination of characteristics and weight. In addition, the manufacturer constantly made design changes, updating the walk-behind tractor to modern levels of comfort and safety. As a result, the consumer is presented with a time-tested, technological model of a walk-behind tractor that meets the highest requirements.
Advantages:
- engine life 3000 hours;
- separate adjustment of the steering handles;
- high traction capacity;
- quality of cultivation;
- large fuel tank;
- good maneuverability.
Flaws:
- demands on the quality of oil and fuel.
Neva MB-2KS-(168FA) 6.5 hp.
The lightweight model is also the most inexpensive in the line, and has received a number of updates and improvements that have a positive impact on its performance. First of all, the manufacturer has eliminated the problems with gear shifting typical of walk-behind tractors - now they shift smoothly and clearly, and also increased the rigidity of the steering column. In addition, the platform connecting the frame and the engine, which causes unnecessary vibrations, was excluded from the design. The main thing is that reliability and functionality have remained at a consistently high level, meeting modern requirements. According to the owners, this is a very good NEVA walk-behind tractor, which has absorbed all the best from other models.
Advantages:
- low cost;
- rigid structure;
- easy start;
- good traction in all speed ranges;
- reduced noise and vibration levels.
Flaws:
- no axle unlocking.
Neva MB2-Y (MX200) 6.5 hp.
There are no negative reviews about the MB2-Y model, which made it possible to include it in the rating of the best. The walk-behind tractor is not new; it has been on sale for more than 10 years. Owners note the reliability of the Yamaha engine, good traction and noticeable fuel efficiency. A high-quality walk-behind tractor is multifunctional; it can be used to plow, remove snow, transport a loaded cart, dig, hill, plant and harvest potatoes, and mow grass. The powerful high-torque engine allows you to easily cope with any tasks, even on difficult, clay soil, as well as in difficult places inaccessible to the tractor. Rearranging the belt on the pulleys allows you to control the walk-behind tractor in higher gears, which will allow you to transport loads faster and use the unit more efficiently.
Advantages:
- spacious 3.9 liter fuel tank;
- a set of overdrive gears available;
- multifunctionality - suitable for most types of agricultural work;
- long engine life;
- increased maneuverability.
Neva MB-23SD-27 5.44 hp
The medium power model is designed for particularly labor-intensive work and is designed for continuous loads. The equipment is equipped with a Japanese Robin-Subaru DY27-2D diesel engine with one cylinder, an oil pump and increased service life. The unit is capable of reaching high speeds of up to 16 km/h and, thanks to its high torque, moving at a low speed of 2 km/h. This allows you to efficiently perform resource-intensive operations without overloading the walk-behind tractor. According to owner reviews, a diesel walk-behind tractor is best suited for cleaning and transporting various loads, as well as for cultivating difficult and hard soil.
Advantages:
- low “ploughing” speed is applicable;
- reliable Japanese engine;
- cultivation depth up to 32 cm;
- 4 speeds forward, 2 reverse and reverse.
Flaws:
- difficult to find on sale.
Motor-block engine "Neva" 10 liters. With.
In the manufacture of the Neva walk-behind tractor, a 4-stroke engine running on gasoline is used. This company is one of the largest manufacturers of engines for garden equipment.
The engine is economical and has an increased service life. It consists of the following elements:
Briggs & Stratton Intek engine
- float carburetor;
- cast iron sleeve;
- Magnetron electronic ignition system (guarantees ease of starting);
- Lo-Tone muffler (provides low levels of vibration and noise);
- double ball bearing, which increases service life;
- mechanical governor to control rotation speed.
The engine also has electric start.
The motor of the Neva walk-behind tractor has the following characteristics: the working volume is 306 cubic meters. cm, and power – 10 l. With.
Specifications
Let's look at the technical characteristics of the Neva walk-behind tractor MB 23-B:
- ground clearance - 14 cm;
- width – 65 cm;
- length – 145 cm;
- height – 130 cm;
- the smallest turning radius is 110 cm.
The unit weighs 104 kg.
Motoblock Neva MB 23-B
Let's look at some more performance indicators of the Neva walk-behind tractor MB 23-B:
- processing depth can reach 20 cm;
- processing width is 168, 127, 86 cm;
- forward speed is 2.5-12 km per hour;
- the speed of movement back is in the range of 2.1 -2.7 km per hour.
Motoblock Neva MB-23 B-10.0 PRO with B&S engine (XR10.0) 10.0 hp
Equipment: 2 paired cutters, pneumatic wheels, axle extensions, additional wings, opener. The manufacturer has the right to change the configuration without additional notice.
The most powerful universal walk-behind tractor Neva MB-23 B-10.0 with a domestically produced professional B&S I/C 10.0 hp engine is in no way inferior to foreign competitors in terms of design, ergonomics, or quality. Excellent technical characteristics and low price allow this model to enjoy particular success among farmers and gardeners. The modern walk-behind tractor is equipped with a professional American-made gasoline engine. The Briggs & Stratton engine with a power of 10 horsepower is easy to maintain, unpretentious, and capable of trouble-free operation for a long time. The walk-behind tractor is distinguished by a wide range of agricultural work due to the possibility of installing additional equipment. Using the machine, you can perform large volumes of plowing, hilling, weeding, etc., and also use it as a snow blower, cargo conveyor, and even a water pump. The cultivation width is 86 cm, the depth is 25 cm. Thanks to these indicators, the Neva MB-23 B-10.0 walk-behind tractor effectively plows the ground, and also significantly reduces the additional time and effort required to re-cultivate the same territory. Weight 104 kg. in combination with a durable design, they allow the unit to effectively process virgin soil and heavy clay soil. The wear resistance and impact resistance of the walk-behind tractor parts allow the machine to be used under any conditions. Neva MB-23 B-10.0 has a differential lock, this allows you to quickly deploy a heavy unit in one place by pressing the lever on the control handle and blocking one of the pneumatic wheels. Excellent maneuverability is ensured by the ability to select the speed mode on the gearbox installed on the walk-behind tractor. Wide wheels and high power allow the unit to pass through the most difficult areas. Handles adjustable in all planes provide the operator with comfort and convenience when working with the unit. The overall dimensions of the walk-behind tractor provide convenient storage and transportation.
Advantages of the Neva MB-23 B-10.0 walk-behind tractor with a professional B&S I/C 10.0 hp engine:
— Professional walk-behind tractor. — Maximum power (10 hp). — Differential locking. — Reinforced gearbox. — Professional B&S Intek I/C engine. — Cast iron cylinder liner. — Large processing width. — Four-stroke engine. — Top arrangement of valves. — Gearbox (4 forward/2 reverse). — Pneumatic wheels + axle extensions. — 4 rotary cutters. — Sufficient weight for processing virgin soil (104 kg). — Power take-off shaft (for using attachments). — Adjustable steering wheel. — Possibility of using a transport trolley. — Load capacity (up to 500kg). — Compact dimensions (for easy transportation). — Wide range of attachments — Can be used for: mowing grass, transporting goods, digging up potatoes, hilling, cutting beds and furrows, for cleaning the territory (brush - cleaner, shovel - blade, rotary snow blower).
What types of attachments are there?
Today, many attachments for this device are available on the market. Let's look at the most popular ones.
Plow
The equipment can cultivate the ground by turning over a whole layer of earth. That is why it is possible to preserve all the properties of the soil, as well as microorganisms. Using a plow, you can plant or dig up potatoes, cultivate a plot before winter, etc. After cultivation, the soil remains loose. When processed, the density of the earth does not increase.
Plow for walk-behind tractor Neva
Milling cutter
This device is the most popular of the entire list of attachments. To select the required processing width, you should change the number of sections and adjust the coulter. For virgin or hard soil, sections should be shortened. The depth of processing depends on the diameter of the element. Such equipment can be used to loosen the soil next to trees, bushes and in beds.
Milling cutters for the Neva walk-behind tractor
Other equipment
The hiller is used for cutting furrows and sowing some vegetables. But this method takes a lot of time.
Other attachments are also often used: wheels with pneumatic tires, segment and rotary mowers, potato digger, etc.
Attachments for Neva walk-behind tractors
Related video: Motoblock Neva MB 23B 10.0 FS
Publications on the topic
Motoblock "Neva" and attachments
Operation of the Neva MB-2 walk-behind tractor, according to the instructions
Characteristics of all models of the Neva-mini motor cultivator
